Characteristic:

The MAD1300 injection molding machine from Deflex is the latest injection molding machine for thermoplastic dentures. The fully open device (any material available on the market can be used in it) has an innovative super-strong pneumatic piston that allows for injection of even the most demanding materials. The Deflex company has been specializing in the production of materials and devices related to dental technology for 15 years. Thanks to the experience gained, the MAD1300 injection molding machine is the best adapted device available on the market: it is characterized by simple operation, failure-free operation and efficient use of compressed air - thanks to which, even with the use of a small amount of compressed air, we obtain a high injection force.

Deflex MAD1300 injection molding machine is:

• maximum time saving
• fully automatic
• pre-defined and empty programs
• easy to install
  ...

Application:

Complete dentures

Characteristics:

Prostheses made of Acrilato fd material are characterized by higher resistance to mechanical damage and lower weight than prostheses made of conventional acrylic.

• They are completely devoid of residual monomer.
• The contraction during polymerization at the level of 0.3% guarantees a perfect fit of the denture in the patient's mouth.
• The material is chemically bonded with traditional "cold" acrylics, which allows it to be repaired or relined in a simple and quick way.

It does not cause allergies.

Package:

Tube: 32.6g

Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional acrylic "cold" so that the material can be repaired and relined in a traditional way.

Application:

• Complete dentures,
• partial dentures with supports,
• overdenture dentures,
• partial dentures on clasps

The colors of the Deflex materials are a combination of translucency and shades of pink, which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.

Characteristics:

• Does not contain residual monomer. Very easy to polish to "high gloss".
• Thanks to its stiffness and fracture
  ...

Characteristic:

Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional acrylic "cold" so that the material can be repaired and relined in a traditional way.

Application:

Full dentures, partial dentures with supports, overdentures, partial dentures with clasps

The colors of the Deflex materials are a combination of translucency and shades of pink, which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.

Characteristics:

Does not contain residual monomer. Very easy to polish to "high gloss". Thanks to its stiffness and fracture resistance, it allows

Characteristic:

Modern polymer-based thermoplastic material for universal use. Flexible with increased hardness compared to other thermoplastic materials. Low contraction (0.6%) guarantees a good fit of the denture. It is chemically combined with traditional acrylic "cold" so that the material can be repaired and relined in a traditional way.

Application:

Full dentures, partial dentures with supports, overdentures, partial dentures with clasps

The colors of the Deflex materials are a combination of translucency and shades of pink, which enable the effect of "adaptation" of the prosthesis to the natural color of the patient's teeth and gums. These effects only become visible when you place the work in your mouth.

Characteristics:

• Does not contain residual monomer. Very easy to polish to "high gloss".
• Thanks to its stiffness and fracture resistan
  ...

Biocompatible PEEK Ossis material for injection.

A set of rings that allows the injection of material onto the frameworks (crowns, bridges). The material should be veneered with composite.

Package:

• 4 casting rings (different sizes)
• Ring cover
• A stand for the rings attaching the socket to the injection molding machine.

6mm wax channels.

Package:

• 20 pcs

Deflex Acetal - is a non-toxic material and does not cause allergies.

It is a suitable replacement for acrylic resin and metal in many prosthetic works. Possible work without expansion plaster.

Acetal application:

• aesthetic buckles for prostheses, the so-called skeletal,
• partial dentures,
• bridges and bridges for telescopes,
• prosthetic elements on implants,
• bite and stabilizing splints,
• retention elements on the beams which are also reinforcement.

Injection temperature - 245 degrees C (+/- 5C) Material melting time - 15min Injection and heating - 30-60 seconds Cooling time under constant pressure - 30 minutes Working pressure - 5.0-7.0 Bar

Package:

8 cubes, min 100g.

Can for injection of thermoplastic materials - compatible with the Deflex MAD1300 injection molding machine. Durable and solid construction.

Package:

1 piece

Deflex material shade guide

Package:

1 piece

The manual is available in the DOWNLOAD section on www. mikran.pl Injection granules, pink color.

The biocompatible PEEK OSSIS injection material is ideal for:

• individual connectors
• structures of crowns and bridges (1-2 spans)
• anatomical structures of crowns and bridges
• Maryland bridges
• telescopic crowns
• constructions of beams for overdentures
• hybrid dentures
• other implantoprosthetic works
• removable dentures.

The material can be used to work on a deflex injection molding machine and other devices operating at a temperature of 390 ° C.

PEEK OSSIS removable dentures are made in the traditional canning method (such as acetal), while permanent restorations are made using a special set of rings (adapted only to the Deflex device) and an investment material.

Package:

20 g

The manual is available in the DOWNLOAD section on www. mikran.pl Injection granules, beige color.

The biocompatible PEEK OSSIS injection material is ideal for:

• individual connectors
• structures of crowns and bridges (1-2 spans)
• anatomical structures of crowns and bridges
• Maryland bridges
• telescopic crowns
• constructions of beams for overdentures
• hybrid dentures
• other implantoprosthetic works
• removable dentures.

The material can be used to work on a deflex injection molding machine and other devices operating at a temperature of 390 ° C.

PEEK OSSIS removable dentures are made in the traditional canning method (such as acetal), while permanent restorations are made using a special set of rings (adapted only to the Deflex device) and an investment material.

Package:

20 g

MaxiFresh cleaning tablets

For professional and home cleaning and care of bleaching splints, retainers, relaxation splints, bruxism splints and sports splints. Perfect for cleaning all thermoplastic materials and trainers.

Benefits:

• It reduces discoloration
• Refreshes the surface and eliminates unpleasant odors
• Saves material as it does not contain abrasives
• Increased service life of the tooth rail with daily cleaning.

Use:

• Place the Maxi-Fresh cleaning tablet in a vessel filled with 150 ml of water at approx. 37C.
• (Colder water may take longer to dissolve the tablet).
• After the tablet has completely dissolved, place the rail in the vessel for a minimum of 45 minutes.
• After the cleaning process is complete, rinse the rail under running water and dry the surface.

Package:

• 24 pcs.

Silicone spray to lubricate the cartridge prior to insertion into the injection molding machine. Reduces friction during injection.

Packaging: 400 ml

Highly abrasive stone which, thanks to its porous structure, does not heat up the thermoplastic material during processing, reducing the risk of material deformation. Use the stone for pre-treatment - collecting material. (use 3000-5000 rpm optimally / max 20,000 rpm)

Package :

1 piece.

Characteristic:

Highly abrasive stone which, thanks to its porous structure, does not heat up the thermoplastic material during processing, reducing the risk of material deformation. Use the stone for pre-treatment - collecting material. (use 3000-5000 rpm optimally / max 20,000 rpm)

Package :

1 piece.