ISP-1 polymerizer

Advantages:

• 40 different polymerization programs can be set
• ease and convenience of use, the ability to control the process by reading on the display
• reliable, fully automatic operation
• made of stainless steel
• dimensions 260x240x310mm
• number of frames 2

Package:

1 piece

ISP-2 polymerizer

Advantages:

• 40 different polymerization programs can be set
• ease and convenience of use, the ability to control the process by reading on the display
• reliable, fully automatic operation
• made of stainless steel
• dimensions 360x240x310mm
• number of frames 3

Package:

1 piece

ISP-3 polymerizer

Advantages:

• 40 different polymerization programs can be set
• ease and convenience of use, the ability to control the process by reading on the display
• reliable, fully automatic operation
• made of stainless steel
• dimensions 370x320x310mm
• number of frames 4

Package:

1 piece

Steamer with polymerization function.

The WW2P steamer is characterized by:

• ease and convenience of use
• operational reliability
• are made entirely of stainless steel
• consist of generally available components
• the large volume of the washing chamber enables simultaneous waxing of the wax from more cans of details

Technical data:

• Total dimension 365x360x430mm
• Bathtub dimensions 360x240x310mm
• Weight 8 kg
• Supply voltage 200V / 50Hz
• Power consumption 1.9KW
• Insulation class I.
• Number of cans 6
• Water temperature 98oC
• Electronic control panel.

Package:

1 piece

Technical data:

• Total dimension 400x470x630mm
• The dimensions of the bathtub are 330x370x370mm
• Weight 15 kg
• Supply voltage 200V / 50Hz
• Power consumption 2.2KW
• Insulation class I.
• Number of cans 8 halves
• Water temperature 98C
• Maximum temperature signaling. Red LED is on.

Package:

1 piece

The WW-1X steamer is designed to rinse out wax from dentures with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

• the use of a thicker water line with a wider cross-section, resulting in a greater flow of rinsing water, thus a better final rinsing effect.
• ease and convenience of use
• operational reliability
• are made entirely of stainless steel
• consist of generally available components
• the large volume of the washing chamber enables simultaneous waxing of the wax from more cans.

Technical data:

• Total dimens
  ...

The WW-2X steamer is designed to rinse out wax from dentures with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

• the use of a thicker water line with a wider cross-section, resulting in a greater flow of rinsing water, thus a better final rinsing effect.
• ease and convenience of use
• operational reliability
• are made entirely of stainless steel
• consist of generally available components
• the large volume of the washing chamber enables simultaneous waxing of the wax from more cans

Technical data:

• Total dimensi
  ...

WAX BURNER WW-3X

The WW-3X steamer is designed to rinse out wax from dentures with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

• the use of a thicker water line with a wider cross-section, resulting in a greater flow of rinsing water, thus a better final rinsing effect.
• ease and convenience of use
• operational reliability
• are made entirely of stainless steel
• consist of generally available components
• the large volume of the washing chamber enables simultaneous waxing of the wax from more cans

Technical data: <

WAX BURNER WW-5 InterSonic

The WW-5 steamer is designed to rinse out wax from dental prostheses with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

• ease and convenience of use
• operational reliability
• are made entirely of stainless steel
• consist of generally available components
• the large volume of the washing chamber enables simultaneous waxing of the wax from more cans

Technical data:

• Total dimension 480x360x310mm
• Powering the so-called "FORCE"
• Insulation class I.
• N
  ...

The WW3 wax steamer is made entirely of stainless steel

Technical data:

• Total dimension 400x470x630mm
• The dimensions of the bathtub are 330x370x370mm
• Weight 15 kg
• Supply voltage 200V / 50Hz
• Power consumption 2.2KW
• Number of cans 8 halves

Package:

1 piece

WAX BURNER WW-4

The WW-4 steamer is designed to rinse out wax from dental prostheses with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

• ease and convenience of use
• operational reliability
• are made entirely of stainless steel
• consist of generally available components
• the large volume of the washing chamber enables simultaneous waxing of the wax from more cans

Technical data:

• Total dimension 430x360x310mm
• Powering the so-called "FORCE"
• Insulation class I.
• Number of ca
  ...

Steamer with polymerization function. X version with thickened hose, stronger water jet.

Advantages; - ease and convenience of operation - operational reliability - made entirely of stainless steel - large washing chamber volume

Technical data:

• Total dimension - 265x440x360mm
• The dimensions of the bathtub - 255x310x235mm
• Supply voltage - 230V / 50Hz
• Power - 1.5 kW
• Insulation class - I
• Number of cans - 4 halves
• The minimum water volume is approx. 6 liters
• Water temperature - 98 ° C.
• Maximum temperature signaling - red LED on
• Weight - 8 kg

Package:

1 piece.

WAX EVAPORATOR WW-1

The WW-1 steamer is designed to rinse out wax from dental prostheses with hot water in a closed circuit. The wax is rinsed with a hand-held full or dispersed spray. The steamer bath has been welded. An electric heater is installed inside the bathtub, a waste water drain and a pipe protruding 20mm from the bottom to supply water to the circulation pump. A cap is fitted on the water circulation pipe to prevent lumps of wax and plaster from getting into the spray.

Features:

• ease and convenience of use
• operational reliability
• are made entirely of stainless steel
• consist of generally available components
• the large volume of the washing chamber enables simultaneous waxing of the wax from more cans of details

Technical data:

• Total dimension 355x265x430mm
• The dimensions of the bath are 260x240x310mm
• Weight 8 kg
• S
  ...

Steamer with polymerization function

Advantages; - ease and convenience of operation - operational reliability - made entirely of stainless steel - large washing chamber volume

Technical data:

• Total dimension - 265x440x360mm
• The dimensions of the bathtub - 255x310x235mm
• Supply voltage - 230V / 50Hz
• Power - 1.5 kW
• Insulation class - I
• Number of cans - 4 halves
• The minimum water volume is approx. 6 liters
• Water temperature - 98 ° C.
• Maximum temperature signaling - red LED on
• Weight - 8 kg

Package:

1 piece

The WW-2 steamer is designed to rinse out wax from dental prostheses with hot water in a closed circuit. The wax is rinsed with a full or dispersed spray. The casing of the steamer and the bathtub are made of stainless steel. There is an electric heater installed inside the bathtub, a waste water drain and a pipe supplying water to the circulation pump. A filter is fitted on the water circulation pipe to prevent lumps of wax and plaster from entering the spray.

Technical data:

• Total dimension (width x height x depth) - 365x430x360mm
• The dimensions of the bathtub (W x H x D) - 360x310x240mm
• Supply voltage - 230V / 50Hz
• Power - 1.9 kW
• Insulation class - I
• Number of cans - 6 halves.
• The minimum water volume is approx. 8 liters
• Water temperature - 98oC
• Maximum temperature signaling - red LED on
• Weight - 10 kg

Package:

1 p

Steamer with polymerization function. X version with thickened hose, stronger water jet.

The WW2P steamer is characterized by:

• ease and convenience of use
• operational reliability
• are made entirely of stainless steel
• consist of generally available components
• the large volume of the washing chamber enables simultaneous waxing of the wax from more cans of details

Technical data:

• Total dimension 365x360x430mm
• Bathtub dimensions 360x240x310mm
• Weight 8 kg
• Supply voltage 200V / 50Hz
• Power consumption 1.9KW
• Insulation class I.
• Number of cans 6 halves
• Water temperature 98 ° C.
• Electronic control panel.

Package:

1 piece