Categories
Toothbrush Ø21mm Borsten hard, 1 piece or 12 pieces
Borsten 111/21 brush on a holder.
Characteristics:
- Diameter 21mm.
- Black.
- Hard.
- For the handpiece.
Packaging:
- 1 piece. or 12 pcs.
Top Dent brush 55mm 22716
3-layer bristle brush, tapered. Universal with a diameter of 55mm.
Package:
1 piece.
...TOP-FLEX diamond separator 0.10mm
Flexible separator for separating porcelain and developing contours.
Characteristics:
- Mounted on a mandrel.
- Diameter 22mm
- Thickness 0.10mm
- Yellow stripe.
Packaging:
- 1 piece.
TopDent brush 80mm
Polishing brush.
- 4 layer
- convergent.
- Hard.
- Diameter 80mm.
Packaging:
- 1 piece.
Tracing paper Arti-Fol 8u, double-sided, red BK1025 supplement
Characteristic:
- Super thin articulation foil
- 8 microns,
- Red colour,
- carbon paper width 22 mm,
- two-sided
Package:
20 m supplement
...Tracing paper Bausch 10x7 cm, blue, BK 11
Articulating paper Bausch, super thin, 40 microns, blue
Bausch articulating papers, super thin, 40 microns, are tear-resistant, covered on both sides with a dye solution. These decals reproduce contact points with great precision thanks to the low thickness of the material. This avoids the formation of defective and blurry contact points. A special layer of liquid dye allows you to clearly mark all occlusal contact points or interference. Even surfaces that are damp from saliva, which are difficult to control, such as gold, porcelain, polished surfaces of metal alloys and plastics, are not a problem.
A special layer of liquid dye consists of many small microcapsules that are soaked in the dye. Even under the pressure of slight chewing forces, the microcapsules break and the dye is clearly deposited on the controlled surfaces. It is also possible to contour several times as the dye regenerates.
Bausch's super-thin occlusive decals are particularly suitabl
...Tracing paper Bausch 10x7 cm, red, BK 12
Articulating tracing paper Bausch, super thin, 40 microns, red
Bausch articulating papers, super thin, 40 microns, are tear-resistant, covered on both sides with a dye solution. These decals reproduce contact points with great precision thanks to the low thickness of the material. This avoids the formation of defective and blurry contact points. A special layer of liquid dye allows you to clearly mark all occlusal contact points or interference. Even surfaces that are damp from saliva, which are difficult to control, such as gold, porcelain, polished surfaces of metal alloys and plastics, are not a problem.
A special layer of liquid dye consists of many small microcapsules that are soaked in the dye. Even under the pressure of slight chewing forces, the microcapsules break and the dye is clearly deposited on the controlled surfaces. It is also possible to contour several times as the dye regenerates.
Bausch's super-thin occlusive decals are particularly
...Tracing paper Bausch 200µ red BK 1002 refill
Articulation Tracing Paper with Progressive Color is the only tracing paper that shows different bite forces through different shades of dye depending on the chewing force.
- A light bite force gives light spots, a stronger bite gives dark spots.
- The dentist receives a precise masticatory force distribution in seconds. Premature contact points become immediately visible and can be sanded down.
- Only with progressive color tracing paper can existing differences in masticatory forces be marked so accurately.
- Once abnormal contact points are located, thinner control materials should be used.
Characteristics:
- Tracing paper size 52mm x 18mm.
- double-sided.
- Red colour.
- 300 sheets.
Packaging:
- 1 piece
Tracing paper Bausch GNATHO-FILM 16 µ 7x10cm
Soft, stretchable 16µ polyethylene film. The flexibility and soft color coating of hydrophilic soft waxes allows precise control of the actual contact points.
Characteristics:
- Color red, green, blue.
- Thickness 16µ
- Sheet 70x100mm
Packaging:
- 1pack/50 sheets
Tracing paper progress.200u, red, 50pcs, Bausch BK04
Characteristic:
Articulating Bausch tracing paper with a progressive color of 200 microns is the only tracing paper that shows various occlusal forces through different shades of dye depending on the chewing force.
LIGHT BIT FORCE GIVES BRIGHT POINTS - MORE DARK FORCE.
The dentist receives a precise distribution of chewing forces within seconds. Premature contact points become immediately visible and can be ground down.
Only with the help of articulating Bausch tracing paper with a progressive tint of 200 microns it is possible to accurately mark the existing differences in chewing forces. Once you have located the wrong contact points, use thinner controls
Package:
50 sheets, red
Tray model clamp with lock
Mdel-tray clamp with lock for molds for split models. 2 sizes.
Package:
1 set.
...Tray model mold with a clamp
Model-tray mold with clamp for split models. 2 sizes.
Package:
1 piece.
...Triplex Cold Monomer 500ml
Triplex Cold, acrylic liquid for cold polymerization.
Package:
- 500ml.
Triplex Cold Polymer PV 500g
Triplex Cold powder, cold curing acrylic material.
Characteristics:
- Intended for making dentures using the pouring technique and for repairs.
- Polymerization should take place in a pressure apparatus for 15 minutes. at 40 °C and 2-6 bar pressure.
- Color PV pink with veins.
Indications:
- Partial dentures.
- Combined dentures.
- Repairs.
- Relines.
Packaging:
- 500g
Triplex Hot Monomer 500ml
Triplex Hot monomer, acrylic liquid for hot polymerization.
Packaging:
- 500ml.
Triplex Hot Polymer PV 500g
Triplex Hot is an acrylic material that polymerizes at high temperature.
Characteristics:
- Intended for making dentures with the application technique.
- Standard polymerization method (recommended) - Place the framed can in a vessel with cold water. Heat the water to 100 °C. Keep boiling for 45 min.
- Alternative polymerization method - Place the can in the frame in a vessel with boiling water and keep it boiling for 20 minutes.
- Pink color with veins.
Indications:
- Complete dentures.
- Partial dentures.
- Combined dentures.
- Relines
Packaging:
- 500g.
Tropicalgin impression material
Alginate chromatic impression material. It changes color from red to yellow. It has the consistency of a powder. It does not contain heavy metals and does not melt in the mouth. It guarantees exceptional accuracy of the impression. Pleasant and unique scent of exotic fruit ensures comfort for patients. Designed for taking impressions in the performance of partial dentures and skeletal dentures, for diagnostic models. The material has a 5-year warranty. It complies with the international ISO 1563 standards. It also has the European CE safety mark.
Advantages:
- Chromatic.
- Dust free.
- Pleasant smell of exotic fruit.
Application:
- For impressions when making removable dentures.
- At the buttons of diagnostic and working models.
- For making opposing impressions in the production of fixed and removable dentures.
Features:
- Mixing t ...
Turbo Diamond DFS 55021
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.
Features:
- Turbo diamond - 15,000 - 30,000 rpm.
- Application - chromium- cobalt, palladium.
Package:
- 1 piece.
Turbo Diamond DFS 55044
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.
Features:
- Turbo diamond - 15,000 - 30,000 rpm.
- Application - chrome- cobalt, palladium.
Package:
- 1 piece.
Turbo Diamond DFS 55181
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.
Features:
- Turbo diamond - 15,000 - 30,000 rpm.
- Application - chrome- cobalt, palladium.
Package:
- 1 piece.
Turbo Diamond DFS 55600
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.
Features:
- Turbo diamond - 15,000 - 30,000 rpm.
- Application - chrome- cobalt, palladium.
Package:
- 1 piece.
Turbo Diamond DFS 55620
Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.
Features:
- Turbo diamond - 15,000 - 30,000 rpm.
- Application - chrome- cobalt, palladium.
Package:
- 1 piece.
Twister cuvette with mixer 65 ml
The well-thought-out geometry of the mixing paddle ensures proper mixing of the masses.
Renfert catalog number 18206500
Advantages:
- The excess material collection zone protects the container against accidental overfilling.
- Container made of high-strength polycarbonate.
- Marking the maximum filling level of the container.
Packaging:
- cuvette with stirrer 65 ml
Twister Mixing spatula
The mixing paddle available for all Twister series containers is an excellent tool for pre-mixing and for removing mixed masses from the container.
Renfert catalog number 18210200
Advantages:
- The rounded edges of the spatula protect the container against damage.
- The length and stability allow you to mix large amounts of material.
Packaging:
- 1 piece.
Two-sided separator 927/220
Double-sided separator with a diamond coating mounted on a holder.
Features:
- Diameter 22x0.30mm.
Package:
1 piece.
...UGIN Artis porcelain firing furnace + vacuum pump PROMOTION
Universal firing furnace for ceramics.
Benefits:
- 100 programs
- durable sleeve with a quartz cover
- easy to read electronic display of programs
- protected against power surges
- possibility of connecting a printer
Technical data:
- waiting temperature range from 0 to 600 C
- temperature increase range from 0 to 1000 ° C
- start of vacuum from 0 to 99%
- heating control from 0 to 200 ° C
- end temperature from 0 to 1200 ° C
- range of vacuum switching on and off from 0 to 1200 C
- cooling range from 1 C / min to 120 C / min.
- maximum power consumption of 1200 W
- dimensions 520 mm x 300 mm x 420 mm
Package:
stove + pump
...Ultracut diamond separator
Ultracut separator ideal for separating porcelain
Renfert catalog number 730000
Advantages:
- Increased service life due to sintered diamond layer.
- Great flexibility.
- Small grinding marks thanks to the dense diamond grit.
Technical data:
- Diameter 20mm
- Thickness 0.15 mm
- Working speed max. 15,000 rpm
- Mounted on a mandrel.
Packaging:
- 1 piece
Undercut blocking wax 70g
Undercut blocking wax - pink. This wax has been developed for blocking out undercuts, for placing bracing steps and for relieving critical areas of models.
Characteristics:
- It can be scraped and cut well.
- It adheres strongly to the model and does not lose its shape even when rinsing in water and duplicating at temperatures up to 54 °C.
- Melting point from 90 °C.
- Solidification point approx. 68 °C.
Packaging :
- 70g.
Unipurol to remove impurities
Unipurol is a concentrate for removing impurities after gypsum, cement, alginates, polishing pastes for degreasing and derusting surfaces.
Characteristics:
- Especially recommended for ultrasonic cleaners.
- The liquid does not affect the structure of metal, varnished and plastic surfaces.
- Does not expose to aggressive action in case of direct contact with the skin /pH 5/.
- Removal of plaster from dentures and interdental spaces as well as calculus from used dentures.
- Degreasing metal parts after polishing or before electropolishing.
- Cleaning trays and tools from alginate impression materials, gypsum and cement residues.
- Due to the degreasing effect of the liquid, cleaning of spoons and tools can be combined with pre-washing.
Packaging:
- 1l.
Universal acrylic polishing paste, beige, 200g
Universal polishing paste, stone paste for high-gloss polishing of all types of acrylic dentures.
Renfert catalog number 5131000
Advantages:
- Hard paste to obtain a mirror-gloss surface.
- Very economical.
- Fine-grained consistency.
Packaging:
- 200g
Universal adapter for connecting the hose
Universal adapter for connecting the hose.
Renfert catalog number 900034305
Advantages:
For the most commonly used hose sizes.
Precise connection without the need for cutting.
Packaging:
- 1 piece.
Universal low-melting solder 700 °C
Universal low-melting solders.
Characteristics:
- Solder in flux rods.
- Universal solder does not contain Ag and Cu based cadmium.
- Operating temperature 700 °C.
- Weight 1.2g, rod diameter 1.0 mm - 1.1 mm
Packaging:
- 1 piece.
Universal Polishing Paste 100ml
Universal Polishing Paste.
- Universal polishing paste for resins and metal.
- Pink color.
Packaging:
- 100 ml
Universal suction hose adapter for extractor hood
Universal suction hose adapter.
Renfert catalog number 900034430
Packaging:
- 1 piece
Universal Tray Adhesive 10ml
A material that improves the adhesion of the silicone impression material to the tray. Universal Tray Adhesive for use on all types of trays.
Packaging:
- 1pc/10ml.
Unreinforced crucible - various types
High-quality ceramic crucibles manufactured in France.
Crucibles dedicated to the most popular induction foundries and centrifuges.
Packaging:
- 1 piece.
Up3d P42 ceramic milling machine - NEW!!!
P42 milling machine High standards High quality.
COMMERCIAL INFORMATION/CONTACT:
Mikran.pl ul. Wojskowa 3/L4 60-792 Poznań sklep@mikran.pl, www.mikran.pl Possibility of free presentation of the milling machine in your workshop/office.
Call us: +48 600 128 010 or +48 530 596 166.
Advantages:
- Grinding with pure water, you don't need another grinding fluid, take care of the material, say goodbye to cumbersome waste disposal.
- Possibility of grinding many materials (glass ceramics, hybrid, composite, titanium).
- Milling an ultra-thin 0.2 mm veneer.
- P 42 capable of milling to remove undercuts by tilting the A axis by #20° to ensure each restoration is perfectly fitted.
- Simple and easy to use, connected to the UPLink platform for remote monitoring, intelligent and highly efficient.
- CAM software UPCAM (optional Millbox).
Ap
...Upcer UP-50H micromotor
High-quality and powerful prosthetic micromotor.
Characteristics:
- Foot/hand control.
- Speed 50,000/rpm
- Easy to use (fits well in the hand).
- Torque 9.8Ncm,
- Dimensions 220x160x80mm,
- Intelligent protection against overheating/overloading/overvoltage.
Packaging:
- 1 piece
Vario Basic left tank with 25-70 micron nozzle
Additional left tank for the Vario Basic sandblaster, with a 0.8mm 25-70 micron sandblasting nozzle.
Renfert catalog number 29540051
Advantages:
- Tank assembly in just a few steps.
- Tool-free tank replacement with quick connector and color-coded system.
Packaging:
- 1 piece
Vario Basic Right tank with 25-70 micron nozzle
Additional right tank, with a 25-70 micron sandblasting nozzle.
Renfert catalog number 29540050
Packaging:
- 1 piece
Vario Basic right tank with 70-250 micron nozzle
Additional right tank, with sandblasting nozzle 1.2 mm 70-250 microns.
Renfert catalog number 29540250
- Tank assembly in just a few steps.
- Tool-free tank replacement with quick connector and color-coded system.
Packaging:
- 1 piece
Vario E wax warmer
The Vario E heater keeps the modeling wax at the selected operating temperature.
Renfert catalog number 14520000
Advantages:
- 30% time savings thanks to the preheating function.
- Three wax containers with separate temperature controls make the device multifunctional.
- Individual adjustment of the wax consistency (from cream to liquid) achieved thanks to stepless temperature regulation from 45 - 110 ° C
- Constant temperature control, the actual value is displayed on the LED display.
- Light-curing waxes can be heated.
- Deep wax containers are ideal for making hats using the immersion method.
Technical data:
- Permissible mains voltage 220 - 240 V
- Permissible mains frequency 50 - 60 Hz
- Power consumption 85 W
- Temperature range 45 - 110°C
- Weight (filled) 660 g
- Dimensions (W x H x D) 178 x 54 x 120 mm
- Number of wax ...
Very soft brush 21mm
Goat hair handpiece brush.
Characteristics:
- Diameter 21mm.
- Very soft goat hair.
- On a holder.
Packaging:
- 1 pc or 12 pcs.
Villacryl H Plus 750g proszek
Villacryl H Plus, polimetakrylanowe tworzywo polimeryzowane na gorąco , przeznaczone do wykonywania płyt podstawowych protez zębowych osiadających całkowitych i częściowych.
Cechy:
- Łatwy w przygotowaniu i obróbce.
- Zapewnia komfort użytkowania protezy.
- Wysoka estetyka protezy dzięki naturalnej kolorystyce.
- Podwyższona wytrzymałość mechaniczna.
- Nie zawiera metali ciężkich i amin trzeciorzędowych.
- Obojętny biologicznie.
Opakowanie:
- 750g
Villacryl H plus 750g+400ml + Iso-sol 250ml
Villacryl H Plus, a hot-polymerized polymethacrylate material, intended for making base plates of full and partial dentures.
Characteristics:
- Easy to prepare and process.
- Provides comfort when using the prosthesis.
- High aesthetics of the prosthesis thanks to natural colors.
- Increased mechanical strength.
- Does not contain heavy metals and tertiary amines.
- Biologically neutral.
Technical data:
- Mixing proportions 24 g powder / 10 g (10.5 ml) liquid.
- Dough preparation time 20-25 minutes. (at 23 °C)
- The shelf life of the dough is 25-30 minutes. (at 23 °C)
- Polymerization process 30 min. – 60°C→100°C, 30 min. – 100 °C, 30 min. – air cooling.
- Breaking strength > 65* MPa.
- Solubility < 1.6* µg/mm3.
- Sorption < 32* µg/mm3.
Packaging:
- 750g powder/400ml liquid