Categories
Regofix Transparent 2x50ml
Transparent material for bite registration.
Application:
- Perfect for controlled bite registration in difficult conditions.
- To be used as a form for making temporary crowns.
- For the production of X-ray splints.
Physical data:
- Final hardness 70 Shore A.
- Consistency type 2 - medium density.
- Preparation time 40s.
- Setting time 120 s.
- Material memory >99.9%.
- Elastic deformation 2.5%.
- Dimensional stability <0.02%.
- Color - transparent.
Packaging:
- 2x 50 ml.
Rein - Strategy yellow matrices 045CSM AY / 4 pcs
Complementary elements of OT STRATEGY. Yellow strategy matrices for metal containers. Extra soft retention.
Package:
- 4 pcs
Reinforced mandrel for 8mm handpiece
Reinforced mandrel for 8mm handpiece, for rubber bands, brushes and stones.
Packaging:
- 1 piece.
Reinforcing mesh 10x10cm fine
Fine CrNi steel reinforcing mesh.
- Mesh size 10x10cm.
Packaging :
- 1 piece.
Reinforcing mesh in a roll 50x10cm
Gold-plated reinforcing mesh in a roll, 50x10cm.
Renfert catalog number 2222100
Packaging:
- 1 piece.
Rema Dynamic S 1000ml
Rema Dynamic S mixing liquid.
Attention:
- The fluid is sensitive to frost.
- Shipment of goods in winter at the customer's risk.
Packaging :
- 1000ml.
Rema Dynamic S investment material 500g
Rema Dynamic investment material in the technique of skeletal dentures.
Characteristics:
- Safe, fast and universal.
- Fast annealing of the rings.
- The rings are placed in an oven heated to 600 °C.
- Heats up to 850-900 °C within 40 minutes.
- It is perfect for combined and whole castings.
- Can be duplicated with agar and silicone.
Packaging:
- 500g.
Rema Exakt 1000ml - The liquid is sensitive to low temperature - shipping in winter at the risk of the customer.
Rema Exakt mass liquid.
Attention:
- The fluid is frost sensitive.
Packaging :
- 1000 ml.
Rema Exakt investment material 400g
Rema Exakt. Quick-setting investment material for partial dentures, for making models and casting rings. The obtained castings adhere precisely to the working models.
**Physical data at room temperature and with 100% mixing and mixing liquid:*
- Processing time 3 min 45 sec.
- Flow properties: 110-120 mm.
- Thermal expansion: 1.00%.
- Compressive strength: 12-15 MPa.
- Preheating temperature: 950-1000 °C.
Packaging:
- 400g.
Remanium 2000+ 1 cube
Remanium 2000 + alloy has excellent physical properties due to continuous casting production.
Application:
- Crowns and bridges.
- Telescopic crowns.
- Prosthetic restorations on implants.
- Glued bridges.
- Secondary elements in skeletal prostheses (combined works).
- The alloy does not require oxidation.
Chemical composition in %:
- every 61st
- Cr 25.
- Mo 7.
- In 5.
- Si 1.5.
- Mn,N < 1%.
Technical data :
- Yield strength Rp 0.2 - 700 MPa.
- Tensile strength Rm - 900 MPa.
- Hardness HV 10 - 340.
- Total elongation at break A5 - 7.0%.
- Young's modulus (modulus of elasticity) - 200,000 MPa.
- Density - 8.6g/cm3.
- WAK 25- 500 C 14x10- 6K- 1.
- Initial melting point - 1325 °C.
- Final melting point - 1415 °C.
Packagin
...Remanium 2001
Remanium 2001 porcelain alloy. It is especially suitable for melting with an oxygen propane burner. Easily processed, soldered, welded, eroded and milled. Corrosion resistant. Free of nickel, beryllium and iron.
Chemical composition in%:
- Every 63%
- Cr 23%
- Mo 7.3%
- In 4.3%
- Si 1.6%
- Mn, N <1%.
Technical data:
- Yield point Rp0.2 - 660 MPa.
- Tensile strength Rm - 850 MPa.
- HV hardness 10 - 336.
- Total elongation after rupture A5 - 5.5%.
- Young's modulus (modulus of elasticity) - 195 GPa.
- Density - 8.6 g / cm3.
- WAK 25- 500 C - 14.2x10- 6K- 1.
- Initial melting temperature - 1325 degrees C.
- Final melting temperature - 1415 degrees C.
Package:
1 piece.
...Remanium CSe 1 cube
Remanium CSe alloy of the latest generation for ceramics in the crown and bridge technique.
Characteristics:
- Very good ceramic adhesion, even after several firings.
- Contains no beryllium, biologically compatible.
- Resistant to corrosion in the mouth.
Chemical composition:
- Ni 61%.
- Cr 26%.
- Mo 11%.
- Si 1.5%.
- Co,Fe,Al,Ce <1%.
Technical data:
- Yield strength Rp0.2 - 340 MPa.
- Tensile strength Rm - 580 MPa.
- Hardness HV 10 - 195.
- Total elongation after tearing A5 - 15%.
- Yung modulus (longitudinal elasticity coefficient) - 170,000 MPa.
- Density - 8.2 g/cm3.
- WAK (25- 500 C) 14x10- 6K- 1.
- Initial melting point - 1280 °C.
- Final melting point 1350 °C.
Packaging:
- 1 piece
Remanium GM 380+ 1 piece
Remanium GM 380 + for making standard, high-strength structures. Universal use in the technique of partial dentures.
Chemical composition:
- Every 64.6%
- Cr 29%
- Mo 4.5%
- other SI,Mn,N,C.
- Initial melting point 1300 °C.
- Final melting point 1370 °C.
Packaging:
- 1 piece.
Remanium GM 800+ 1 cube
Remanium GM 800 + alloy for casting partial dentures. The mirror shine of the molten metal allows you to determine the right moment for pouring.
Characteristics:
- The alloy has high resistance to fracture thanks to its excellent physical properties.
- A high modulus of elasticity allows you to obtain delicate, yet stable structures.
- Reduced hardness facilitates processing and polishing.
- High surface gloss after electrolytic polishing.
- Perfect for laser welding.
Chemical composition:
- Every 63.3%.
- Cr 30.0%.
- Mo 5.0%.
- Si 1%.
- MN,C,N.
Parameters:
- Yield strength Rp 0.2 - 720 MPa.
- Tensile strength Rm - 960 MPa.
- Hardness HV 10 - 370.
- Total elongation after tearing A5 - 6.0%.
- Young's modulus - longitudinal elasticity coefficient - 230,000 MPa.
- Density - 8.2 g ...
Remanium Star 1 piece
Remanium Star alloy for ceramics with extremely low hardness. Universal use: crowns and bridges, telescopic crowns, prosthetic restorations on implants, bonded bridges, secondary elements in skeletal dentures (combined works).
Chemical composition in %:
- Every 60.5.
- Cr 28.
- In the 9th
- Si 1.5.
- Mn,N,Nb < 1.
Technical data :
- Yield strength Rp 0.2 - 620 MPa.
- Tensile strength Rm - 845 MPa.
- Hardness HV 10 - 280.
- Total elongation after tearing A5 - 10.2%.
- Young's modulus (longitudinal elasticity coefficient) - 190,000 MPa.
- Density - 8.6g/cm3.
- WAK 25- 500 degrees C 14.1x10- 6.
- Initial melting point - 1320 ° C.
- Final melting point - 1420 °C.
Packaging:
- 1 piece.
Remanium wire 0.6mm round 225m
Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.
Characteristics:
- 0.6mm wire.
- Length 225m.
- Resilient - hard.
- The highest quality of stainless steel.
- Tensile strength (N/mm2) 1800 - 2000.
Packaging:
1 roll/225 m
...Remanium wire 0.7mm round 165m
Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.
Characteristics:
- 0.7mm wire.
- Length 165m.
- Resilient - hard.
- The highest quality of stainless steel.
- Tensile strength (N/mm2) 1800 - 2000.
Packaging:
- 1 Roll /165m
Remanium wire 0.7mm round hard 30m
Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.
Characteristics:
- 0.7mm wire.
- Length 30m.
- Hard.
- The highest quality of stainless steel.
- Tensile strength (N/mm2) 1400 - 1600.
Packaging:
- 1 roll/30m
Remanium wire 0.8mm round 125m
Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.
Characteristics:
- 0.8mm wire.
- Length 125m.
- Resilient - hard.
- The highest quality of stainless steel.
- Tensile strength (N/mm2) 1800 - 2000.
Packaging:
- 1Roll/125m
Remanium wire 0.8mm round hard 20m
Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.
Characteristics:
- 0.8mm wire.
- Length 20m.
- Hard.
- The highest quality of stainless steel.
- Tensile strength (N/mm2) 1400 - 1600.
Packaging:
- 1 Roll/20m
Remanium wire 0.9mm round 100m
Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.
Characteristics:
- 0.9mm wire.
- Length 100m.
- Resilient - hard.
- The highest quality of stainless steel.
- Tensile strength (N/mm2) 1800 - 2000.
Packaging:
- 1 roll/100m
Remanium wire 0.9mm round hard 10m
Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.
Characteristics:
- 0.9mm wire.
- Length 10m.
- Hard.
- The highest quality of stainless steel.
- Tensile strength (N/mm2) 1400 - 1600.
Packaging:
- 1 roll/10m
Remanium wire 1.1mm round 10m
Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.
Characteristics:
- 1.1mm wire.
- Length 10m.
- Resilient - hard.
- The highest quality of stainless steel.
- Tensile strength (N/mm2) 1800 - 2000.
Packaging:
- 1 Roll/10m
Remanium wire 1.2mm round 10m
Ready-made wire elements for mounting in mobile devices. They do not change in the mouth, they are very durable and resilient. Remanium wires are made of the highest quality chromium-nickel stainless steel. Remanium wires have all the features necessary in orthodontics, maxillofacial orthopedics and prosthetics. Large variety of physical properties and dimensions.
Characteristics:
- 1.2mm wire.
- Length 10m.
- Resilient - hard.
- The highest quality of stainless steel.
- Tensile strength (N/mm2) 1800 - 2000.
Packaging:
- 1 roll/10m
Renfert-Brush Ceramicus number 8
Ceramicus brush made of synthetic hair with a special microstructure.
Benefits:
- Very high resilience.
- Very dense hair.
- After applying porcelain, the hair takes its original shape.
Package:
- 1 piece.
Repligel PG - agar for duplicating plaster models
Repligel PG is an agar mass suitable for duplicating plaster models. Thanks to the use of a special recipe, the surface of the cast negative remains dry after the agar sets and does not react with the plaster model. The material allows you to obtain high-quality duplicate models even with sharp contours and deep undercuts. Repligel PG can be used repeatedly, just like traditional agar - this allows for a significant reduction in the cost of duplicating models - we recommend it especially to technicians who work with the thermal injection method of acetal and nylon.
Instruction:
The gel should be cut into small pieces (the smaller the better) and placed in an agar pot or other melting device. Heat to 90-95 °C, stirring constantly. Mixing prevents lumps from forming and helps obtain a uniform gel consistency. Avoid overheating the gel (boiling) because it causes water to evaporate and shortens the shelf life of the product. To minimize water evap
...
Resin tank for the Photon Mono X / X6K / M3Plus printer
Resin tray for Photon Mono X / X6K / M3Plus printer
Packaging:
- 1 piece.
Resione 3D Resin C01 Dental Castable 1kg
C01 is a transparent, green resin intended for use in dentistry.
- It is mainly used for casting nickel-chromium and cobalt-chromium alloys.
- C01 ensures high precision in both form and dimensions, it is the ideal choice for the production of crowns, bridges and frames that ensure a perfect fit every time.
- The excellent fluidity of this resin speeds up the 3D printing process and ensures prints with clear details and high shape accuracy.
- Additionally, C01 resin has high stiffness and does not require additional hardening, which saves time.
- Prints also do not require thick supports, and the supports can be easily removed, leaving no pits on the surface and reducing manual sanding time.
Advantages:
- The C01 resin has been specially designed for dental applications and is suitable for centrifugal casting at 900°C without residue.
- High precision, whether in terms of shape accuracy or dimension ...
Resione 3D Resin D01S Dental model 1kg
01S is a beige dental model resin containing unique inorganic fillers to increase performance. Printed dental models have a matte surface with a plaster texture, which ensures precise scanning results. In addition, the resin material features accurate size, scratch-resistant surface, extremely low shrinkage rate and long-term stability, making it ideal for printing high-quality dental models. With the D01S you can create tooth models with confidence and precision.
Advantages:
- Very low shrinkage.
- High dimensional accuracy.
- Hard and wear-resistant surface.
- Matte surface and plaster texture.
Application:
- Working models.
- Implant models.
- Diagnostic models.
Compatible with 3D printers for UV resin 385-410nm DLP:
- All series of Anycubic, Asiga, Solus, Miicraft, Kudo3d, Flashforge, Makex, Shining etc.
Mechani
...Resione 3D resin F80 Gingival-like 0.5kg
F80 is a soft and flexible resin, pink in color, particularly suitable for creating models of dental gums. F80 resin can maintain its softness even at lower temperatures.
Advantages:
- F80 resin prints have a Shore hardness of 50-60A, are soft to the touch and flexible.
- F80 resin prints are characterized by good elasticity and quickly regain their shape after deformation.
- Even at temperatures below 10°C, F80 prints remain soft, although their flexibility decreases as the temperature drops.
- F80 resin is suitable for all popular LCD/MSLA/DLP 3D printers on the market, including RGB or monochrome printers.
- Printer Compatibility - All series of Anycubic, Asiga, Solus, Miicraft, Kudo3d, Flashforge, Makex, Shining etc. 385-410nm DLP UV resin 3D printer.
Mechanical properties:
- ASTM Shore Hardness: D2240-05 50-60A.
- Tensile strength ASTM: D638-14 3.8 MPa.
- Tear str ...
Retention of split models 500 pieces
Retentions of split models.
- Elements connecting plaster layers in split models.
- They provide a very good connection.
- They don't drown.
- They can be easily cut without damaging the saw blades.
Packaging :
- 500 pcs.
Rhein - Dies micro pink 040CRM SN / 6 pcs
Complementary elements of OT CAP SYSTEM. Pink micro dies 1.8mm diameter. Soft retention.
Package:
- 6 pcs
Rhein - Martyce micro black 043CLM / 6 pcs
Micro Black Matrices (for the technician).
Package:
6 pcs
...Rhein - Metal container for acrylic normo 041CAN 2 pcs
Metal container for acrylic Normo.
Package:
- 2 pcs
Rhein - Metal micro container 041CAM / 2 pcs
Complementary elements for OT CAP SYSTEM. Micro metal container for acrylic.
Package:
- 2 pcs.
Rhein - Micro green matrices 049PCM / 6 pcs
Complementary elements of OT CAP SYSTEM. Green micro matrices with a diameter of 1.8 mm. Very flexible retention.
Package:
- 6 pcs.
Rhein - Micro sea color matrix 040CRMDR8 / 6 pcs
Micro sea color matrix (standard retention), with reduced dimensions of the inside diameter.
Package:
- 6 pcs.
Rhein - Micro white dies 040CRM / 6 pcs
Complementary elements of OT CAP SYSTEM. White micro dies with a diameter of 1.8mm. Standard retention
Package:
- 6 pcs
Rhein - Normo angle beams 151BAN / 2 pcs
Complementary elements of OT CAP SYSTEM. Normo angle beams with a diameter of 2.5 mm, burning without residue.
Package:
- 2 pcs.
Rhein - Normo pink dies 040CRN SN / 6 pcs
Complementary elements of OT CAP SYSTEM. Normo pink dies with a diameter of 2.5mm. Soft retention.
Package:
- 6 pcs
Rhein - Normo yellow dies 060CRN AY / 6 pcs
Complementary elements of OT CAP SYSTEM. Normo dies, diameter 2.5 mm, yellow. Extra soft retention.
Package:
- 6 pcs
Rhein - Ot Bar Multiuse 022OBB / 2pcs
Beams burning without residue OT BAR MULTIUSE.
Package:
- 2 pcs
Rhein - OT Box mono micro 042AMM / 2 pcs
OT BOX Mono, Micro. Burns without residue.
Package:
- 2 pcs