Categories
IPS e.max CAD for Cerec/inLab LT I12/5pcs
IPS e.max CAD are lithium disilicate glass ceramic blocks for CAD/CAM technology. The manufacturing process guarantees completely homogeneous blocks. The pre-crystallized (blue) block can be easily developed in a CAD/CAM device. The block in the pre-crystallized state has a characteristic white color that goes through a blue shade to a blue-gray tone. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is thus comparable to other glass ceramic blocks currently available on the market. After the restoration has been cut out of the blocks, it is crystallized in the Ivoclar Vivadent ceramic furnace (e.g. Programat CS). The crystallization process is easy to carry out and, unlike other CAD/CAM systems, restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the whole process takes about 20-25 minutes. Crystallization at 840 °C causes changes in the struc
...IPS e.max CAD for CEREC/inLab MO C14/5pcs
PS e.max CAD are lithium disilicate glass ceramic blocks for CAD/CAM technology. The manufacturing process guarantees completely homogeneous blocks. The pre-crystallized (blue) block can be easily developed in a CAD/CAM device. The block in the pre-crystallized state has a characteristic white color that goes through a blue shade to a blue-gray tone. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is thus comparable to other glass ceramic blocks currently available on the market. After the restoration has been cut out of the blocks, it is crystallized in the Ivoclar Vivadent ceramic furnace (e.g. Programat CS). The crystallization process is easy to carry out and, unlike other CAD/CAM systems, restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at 840 °C causes changes in the struc
...IPS e.max CAD for CEREC/inLab MT C14/5pcs
Medium translucency lithium disilicon ceramic blocks.
IPS e.max CAD are lithium disilicate glass ceramic blocks for CAD/CAM technology. The manufacturing process guarantees completely homogeneous blocks. The pre-crystallized (blue) block can be easily developed in a CAD/CAM device. The block in the pre-crystallized state has a characteristic white color that goes through a blue shade to a blue-gray tone. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is thus comparable to other glass ceramic blocks currently available on the market. After the restoration has been cut out of the blocks, it is crystallized in the Ivoclar Vivadent ceramic furnace (e.g. Programat CS). The crystallization process is easy to carry out and, unlike other CAD/CAM systems, restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25
...IPS e.max CAD for PrograMill HT C14/5
Lithium disilicate glass ceramic. IPS e.max CAD is the world's best-selling glass ceramic. It is suitable for the efficient fabrication of full contour restorations and is known for its versatile applications, wide range of processing options and high strength of 530 MPa.
Packaging:
- 1pack/5pcs
IPS e.max CAD for PrograMill HT I12/5
Lithium disilicate glass ceramic. IPS e.max CAD is the world's best-selling glass ceramic. It is suitable for the efficient fabrication of full contour restorations and is known for its versatile applications, wide range of processing options and high strength of 530 MPa.
Packaging:
- 1pack/5pcs
IPS e.max CAD for PrograMill MT C14/5
Lithium disilicate glass ceramic. IPS e.max CAD is the world's best-selling glass ceramic. It is suitable for the efficient fabrication of full contour restorations and is known for its versatile applications, wide range of processing options and high strength of 530 MPa.
Packaging:
- 1pack/5pcs
Ips E.Max Ceram Add-On 20 g
Ips E.Max Ceram Add-On - corrective mass.
IPS e.max Ceram Add-On materials are available in four shades.
- Add-On Ceram
- Add-On Incisal
- Add-On Margin
- Add-On Bleach
Packaging:
- 20g
IPS e.max Ceram Deep Dentin 20g Chromascop colors - Sale!!!
IPS e.max Ceram Deep Dentin.
Deep Dentin materials, characterized by fluorescence close to natural, increased opaqueness and color saturation, enable the achievement of natural tooth color even when the amount of space is limited, and thus allow for increased color intensity, especially in the cervical area, which results in a more accurate color match of the gingival span. .
Packaging:
- 20g.
IPS e.max Ceram Deep Dentin AD 20g
IPS e.max Ceram Deep Dentin.
Deep Dentin materials, characterized by fluorescence close to natural, increased opaqueness and color saturation, enable the achievement of natural tooth color even when the amount of space is limited, and thus allow for increased color intensity, especially in the cervical area, which results in a more accurate color match of the gingival span. .
Packaging:
- 20g.
IPS E.Max Ceram Dentin 100g AD
IPS e.max Ceram Nano-fluoroapatite ceramic for veneering all-ceramic structures. Intended for firing on all IPS e.max components - both made of glass ceramic and zirconium oxide. Thanks to such a combination, a clear scheme of applying individual layers, and a combination of aesthetics and durability of techniques, it can offer the doctor and his patients the maximum brilliance of individual naturalness.
Physical data:
- Coefficient of thermal expansion 9.4 ± 0.5 x 10⁻⁶K⁻¹ (25-400°C);
- firing temperature 730°C (1st dentin);
- Flexural strength (biaxial) ≥50 N/mm²;
- Chemical solubility <100µg/cm².
- Packaging 100g Available in 16 AD colors
Application:
- Characterization and veneering of IPS e.max Press, IPS e.max ZirPress, IPS e.max CAD and IPS ZirCAD restorations;
- Characterization and veneering of ZrO₂ frameworks in the range of thermal expansion coefficient 10.5-11.0 ...
IPS e.max Ceram Dentin AD 20g
IPS e.max Ceram nano-fluoroapatite ceramic for veneering all-ceramic structures. Designed for firing all IPS e.max components - both made of glass ceramics and zirconium oxide. Thanks to this combination, a clear pattern of applying individual layers, and a combination of aesthetics and durability, the technician can offer the doctor and his patients maximum radiance of individual naturalness.
Characteristics:
It comes in 16 AD colors and 4 Bleach colors.
Packaging:
- 1pc/20g.
IPS e.max Ceram Essence 5g
IPS e.max Ceram Essence, materials for characterizing and staining ceramic restorations, can be fired together with the glaze or separately.
Packaging:
- 5g.
Ips e.max ceram Gingiva Kit
IPS e.max Ceram Gingiva Kit. A set of cramic materials intended for making gum copies.
Packaging:
1 x 5 g IPS e.max Ceram ZirLiner Gingiva
5 x 20 g IPS e.max Ceram Gingiva, colors: 1, 2, 3, 4, 5
4 x 20 g IPS e.max Ceram Intensive Gingiva, colors: 1, 2, 3, 4
3 x 5 g IPS e.max Ceram Essence colors: rose, berry, aubergine
1 x 1 pc, IPS e.max Ceram Gingiva shade guide
IPS e.max Ceram Glaze paste 3g
IPS e.max Ceram Glaze Paste.
Glaze in the form of a paste.
Packaging:
- 3g.
IPS e.max Ceram Glaze paste fluo 3g
IPS e.max Ceram Glaze FLUO paste.
Characteristics:
- It is used in areas of the restoration that have not been veneered with IPS e.mac Ceram.
- Additionally, it is applied to frameworks that show no or very little fluorescence.
Packaging:
- 3g.
IPS e.max Ceram Glaze Powder 5g
IPS e.max Ceram Glaze powder - glaze in powder form.
Package:
- 5g.
Ips E.max Ceram Impulse Kit PROMOTION
Application:
- Characterization and veneering of IPS e.max Press, IPS e.max ZirPress, IPS e.max CAD and IPS ZirCAD restorations;
- Characterization and veneering of ZrO₂ frameworks in the range of the thermal expansion coefficient 10.5-11.0 x 10⁻⁶K⁻¹ (25-500 ° C);
- Layered veneers on refractory material for stumps;
- Shaping of the gingiva on IPS e.max ZirCAD and IPS e.max ZirPress restorations.
Physical data:
- thermal expansion coefficient 9.4 ± 0.5 x 10⁻⁶K⁻¹ (25-400 ° C); firing temperature 730 ° C (1st dentin); bending strength (biaxial) ≥ 50 N / mm²; chemical solubility <100 µg / cm².
Packaging:
- 2 Impulse occlusal dentine (OD orange, OD brown) 20 g each;
- 3 Impulse mamelon (MM light, MM salmon, MM yellow-orange) 20 g each;
- 6 Impulse opal effect (OE1-OE5, OE violet) 20 g each;
- 3 Impulse transpa (T blue, T brown-gray, T or ...
IPS e.max Ceram Incisal Edge
IPS e.max Ceram Impulse Incisal Edge.
This material is used to achieve an effect known as "halo", which is produced in natural teeth by the refraction of light rays at the incisal edge.
Packaging:
- 20g
Ips E.Max Ceram Intensive Gingiva 20g
IPS e.max Ceram Gingiva is a set of materials intended for the reconstruction of gingival tissue, especially during the fabrication of implant-supported restorations.
Colors 1 to 4 intensive materials for the creation of an individual gingival shade.
Package:
- 20g
IPS e.max Ceram Intro Kit A2
Low-melting nano-fluorapatite ceramic glass that can be used to characterize and veneer restorations made by pressing and/or CAD/CAM. Thanks to the optimized combination of low firing temperature (730 °C) and thermal expansion coefficient of 9.5 x 10⁻⁶K⁻¹ (100-400 °C), the material is suitable for glass ceramics based on lithium disilicate and ZrO₂.
Packaging:
- 1 ZirLiner (ZL1) 5g;
- 1 margin (MA2) 5g;
- 1 deep dentine (DA2) 5 g;
- 1 dentine (DA2) 5 g;
- 1 transpa incisal (TI1) 5 g;
- 1 transpa (T clear) 5 g;
- 2 Impulse opal effect (OE1, OE3) 5 g each;
- 1 Impulse occlusal dentine (OD orange) 5 g;
- 1 Impulse mamelon (MM light) 5 g;
- 1 ZirLiner build-up liquid allround 15 ml;
- 1 margin liquid allround 15 ml;
- 1 build-up liquid allround 15 ml;
- 3 Ivocolor essence (E01, E04, E10) 1.8 g each;
- 1 Ivocolor dhade dentine (SD1) 3 g;
- 1 Ivocolor glaze p ...
IPS e.max Ceram Mamelon 20g
IPS e.max Ceram Impulse Mamelon.
Mamelon materials are available in three colors (Light, Salmon, Yellow-Orange).
They have high opacity and excellent covering properties, even when applied in thin layers.
Depending on the method of work, these materials are placed in thin lines on the surface of the reduced dentine, thus achieving an individualized appearance of the incisal edge.
Packaging:
- 20 g
IPS e.max Ceram Margin 20g
IPS e.max Ceram Margin, mass for modeling the cervical area and for making ceramic steps on the IPS e.max ZirCAD framework.
Due to the difference in firing temperature with respect to dentine and incisal materials, Margin materials exhibit excellent layering stability.
Packaging:
- 20g.
IPS e.max Ceram Occlusal Dentin 20g
IPS e.max Ceram Impulse Occlusal Dentin.
Occlusal Dentin materials are available in two colors (Brown and Orange).
They are used to obtain the basic color of the chewing surfaces and to intensify the saturation.
Packaging:
- 20g
IPS e.max Ceram Opal Efect 20g.
IPS e.max Ceram Impulse Opal Effect.
Opal Effect materials are available in 6 different colors. Starting with Opal Effect - 1 with naturally increased opalescence and at the same time high translucency - the brightness between Opal Effect 2 and 4 gradually increases. Opal Effect 5 is characterized by a typical iridescent color. The Opal Effect Violet material is used to reduce the brightness in the incisal area.
Packaging:
- 20 g.
IPS e.max Ceram Power Dentin 20g
IPS e.max Ceram Power Dentin materials are characterized by increased brightness. The use of Power Dentin / Power Incisal facilitates the production of bright colors while maintaining the translucency effect and at the same time avoiding the gray effect. The dental composition, in terms of chemical composition and grain size, is the same as conventional IPS e.max Ceram Dentin. Power Dentin is recommended for use in combination with highly translucent (translucent) zirconium oxide structures (i.e. Zenostar T, MT) or translucent IPS e.max Press / CAD materials (i.e. LT, MT,).
Package:
- 20g
IPS e.max Ceram Power Incisal 20g
IPS e.max Ceram Power Dentin materials are characterized by increased brightness. The use of Power Dentin / Power Incisal facilitates the production of bright colors while maintaining the translucency effect and at the same time avoiding the gray effect.
The dental material is akin to conventional IPS e.max Ceram Dentin in terms of its chemical composition and grain size.
Power Dentin is recommended for use in combination with highly translucent (translucent) zirconium oxide structures (i.e. Zenostar T, MT) or translucent IPS e.max Press / CAD materials (i.e. LT, MT,).
Package:
- 20g
IPS e.max Ceram Selection 5g
IPS e.max Ceram Enamel and Effect materials enable even greater creative freedom and individuality in the layering technique. They can be used in combination with existing IPS e.max Ceram materials and, together with the brilliant shades, also provide impressive optical properties in light.
IPS e.max Ceram Selection consists of twelve materials specifically designed to give the perfect effect, giving professionals more room for creativity and individuality in the layering technique.
The colors of these materials and their application possibilities are the result of many years of experience in working with IPS e.max Ceram ceramics. IPS e.max Ceram Selection materials for enamel characterization are available in twelve colors, divided into three groups.
Materials "Special Enamel" with a translucency resembling natural enamel is suitable for obtaining color and saturation.
- The three "Light Reflector" colors ...
IPS e.max Ceram Selection kit
The IPS e.max Ceram Selection offer includes new materials for enamel characterization and Effect materials, which can impress professionals with their unusual colors and exceptional optical properties.
The IPS e.max Ceram Selection offer includes specialized materials that allow for great creativity when using the layered reconstruction technique. They complement the existing set of IPS e.max Ceram materials, providing new possibilities in creating individual features of restorations to make them look even more natural. A team of highly respected dental technicians, including Oliver Brix (Germany), August Bruguera (Spain) and Gerald Ubassy (France), played a huge role in the creation of the new IPS e.max Ceram Selection materials. The colors of these materials and their application possibilities are the result of many years of experience in working with IPS e.max Ceram ceramics.
The twelve colors are divided into three groups:
- Special Enam ...
IPS e.max Ceram Shade 3g
IPS e.max Ceram Shade. Compounds for the final color modification of prosthetic restorations made of IPS e.max, as well as for the "wash" layer
Packaging:
- 3g.
IPS e.max Ceram Starter Kit AD
IPS e.max Ceram.
Low-melting nanofluoroapatite glass-ceramic material, which enables veneering and characterization of works performed with the use of pressing technology and / or CAD / CAM technology.
To facilitate the work with the system, the IPS e.max Ceram Basic Kit includes the most popular dentin shades - 4 pcs, appropriate incisal materials and the necessary accessories.
Packaging:
- PS e.max Ceram Dentin A1 20 g 1x 20 g A1
- IPS e.max Ceram Dentin A2 20 g 1x 20 g A2
- IPS e.max Ceram Dentin A3 20 g 1x 20 g A3
- IPS e.max Ceram Dentin A3.5 20 g 1x 20 g A3.5
- IPS e.max Ceram Transpa Incisal TI 1 1x 20 g 1
- IPS e.max Ceram Transpa Incisal TI 2 1x 20 g 2
- IPS e.max Ceram Transpa neutral 20 g 1x 20 g neutral
- IPS e.max Ceram Transpa clear 20 g 1x 20 g clear
- IPS e.max Ceram Inc / Trans
- IPS e.max Ceram Add On Dentin 20 g 1x 20 g
- IPS e.max Ceram Add On Inc ...
IPS E.max Ceram Transpa 100 g
IPS e.max Ceram Transpa.
Characteristics:
- They are used to accurately reproduce transparent areas with all details, mainly in the periphery of the incisal edge.
Package:
- 100 g
Ips e.max Ceram Transpa 20g
IPS e.max Ceram Transpa.
Characteristics:
- They are used for accurate reproduction of transparent areas with all details, mainly in the incisal area.
Packaging:
- 20g.
Ips E.Max Ceram ZirLiner 20g
IPS e.max Ceram ZirLiner.
Used to characterize white zirconium oxide frameworks.
Helps match the base color to the base colors in IPS e.max Press and IPS e.max CAD
Packaging:
- 20g.
IPS e.max CeramTranspa Incisal 20g
IPS e.max Ceram Transpa Incisal, incisal mass.
Packaging:
- 20g.
IPS e.max Glaze Powder Fluo 5g
IPS e.max Ceram Glaze FLUO powder.
Characteristics:
- It is used in areas of the restoration that have not been veneered with IPS e.max Ceram.
- Additionally, it is applied to frameworks that show no or very little fluorescence
Packaging:
- 5g.
IPS e.max Press Basic Kit MO
IPS e.max Press MO - Medium Opacity
The lozenges are available in 5 color groups {MO 0 - MO4}. Due to the degree of opacity, they are ideal for the fabrication of living, slightly discolored stumps. The individual anatomical shape of the restoration is then carried out using IPS e.max Ceram. Finally, apply the stains and fire the IPS e.max Ceram Glaze.
Package:
- IPS e.max Press Ingots HO - 1x5 pcs.
- IPS e.max Press Ingots MO 0, MO 1, MO 2, MO 3, MO 4, - 1 x 5 pcs.
- IPS e.max Press Ingots L HO 1x 3 pcs.
- IPS e.max Press Ingots L MO 0, MO 1, MO 2, MO 3, MO 4,
- IPS e.max Investment Ring System 100 g - 1 pc
- IPS e.max Investment Ring System 200g - 1 pc
- IPS Silicone Ring 100g - 1 pc
- IPS Silicone Ring 200g - 1 pc
- IPS e.max Alox Plunger - 2 pcs
- IPS e.max Alox Plunger Separator - 20g
- IPS Connector - 1 pc
- IPS e.max Press HO / MO Material Shade ...
IPS e.max Press HO L/3 pcs
IPS e.max Press HO are disilicon-lithium glass ceramic pellets for stamping technology. The latest production technology allowed us to obtain absolutely hemogenic material, which is available in the form of lozenges with various degrees of opaqueness.
Indications:
- Crowns in the anterior and lateral sections.
- Three-unit bridges in the anterior region.
- Three-point bridges in the posterior section, to the second premolar as the last abutment tooth.
- Pressing onto single galvanic crowns.
- Primary telescopic crowns.
Characteristics:
- Bending strength 400 MPa.
- HO lozenges with high opacity are available in one color.
- Large L lozenges.
Packaging:
- 3pcs/pack
IPS e.max Press HO/5 pcs
IPS e.max Press. Disilicon-lithium glass ceramic pellets for stamping technology. The latest production technology allowed us to obtain an absolutely homogeneous material, which is available in the form of pellets with various opacity.
Indications:
- Crowns in the anterior and lateral sections.
- Three-unit bridges in the anterior region.
- Three-point bridges in the posterior section, to the second premolar as the last abutment tooth.
- Pressing on single galvanic crowns.
- Primary telescopic crowns.
Characteristics:
- Mechanical strength 400 MPa.
- HO pellets with high opacity are available in three colors HO1, HO2, HO3
Packaging:
- 5pcs/1 pack
IPS e.max Press HT / 5 pcs
IPS e.max Press HT (High Translucency)
HT ingots are available in 16 colors of the AD key and 4 colors for bleached BL teeth.
Characteristics:
- Due to their high translucency, they are ideal for the fabrication of smaller restorations, e.g. inlays and onlays. HT ingot restorations are characterized by a natural chameleon effect and an unusual adaptation to the hard tissues of the tooth.
- HT ingots are ideal for working with the staining technique, as well as for the cut back technique.
- Stain and characterization firing as well as Glaze firing can be performed with IPS e.max Ceram Shades, Essence and Glaze.
- If a correction is required, it can be done with IPS e.max Ceram ceramic materials.
Package:
- 5 pcs / pack
Ips e.max Press HT L/3 pcs
IPS e.max Press are glass ceramic pellets based on lithium disilicate, intended for PRESS technology. The manufacturing process guarantees obtaining completely homogeneous pellets with varying degrees of translucency. They are characterized by a strength of 400 MPa and are therefore the most durable material of this type. Perfectly fitting restorations are made from them in Ivoclar Vivadent pressing furnaces. The embossed, extremely aesthetic tooth-colored restorations are then painted and/or veneered and glazed with IPS e.max Ceram.
HT lozenges - high translucency Large lozenges
Packaging:
1 pack/3 pcs
...Ips E.max Press Ingots Impulse
Impulse ingots enable the fabrication of restorations with very clear iridescent properties. Opal lozenges are available in two variants with different degrees of brightness (Opal 1, Opal 2). These pastilles are suitable for making veneers with light-colored teeth, where an iridescent effect is needed.
Package:
- 5pcs / 1vial
IPS e.max Press Invex Liquid 1000ml
IPS e.max Press Inwex Liquid is used to dissolve the surface reaction layer formed on embossed elements during the stamping process.
Packaging:
- 1000ml.
Ips e.max Press LT L/3 pcs
IPS e.max Press LT low Translucency
LT lozenges are available in 16 AD shades and 4 Bleach BL shades for bleached teeth. Due to their low translucency, they are ideal for making larger restorations, e.g. posterior crowns. Restorations made of LT lozenges are characterized by a natural degree of brightness and chromaticity. This prevents the gray effect of embedded restorations. LT tablets are suitable for work with the cut bac technique, they can also be used in the painting technique. For the cut back technique, IPS e.max Ceram Incisal and/or Impulse should then be used and characterization should be done with IPS e.max Ceram Essence and Shades.
Packaging:
- 3pcs/pack
IPS e.max Press LT/5 pcs
IPS e.max Press LT low Translucency
LT lozenges are available in 16 AD shades and 4 Bleach BL shades for bleached teeth. Due to their low translucency, they are ideal for making larger restorations, e.g. posterior crowns. Restorations made of LT lozenges are characterized by a natural degree of brightness and chromaticity. This prevents the gray effect of embedded restorations. LT tablets are suitable for work with the cut bac technique, they can also be used in the painting technique. For the cut back technique, IPS e.max Ceram Incisal and/or Impulse should then be used and characterization should be done with IPS e.max Ceram Essence and Shades.
Packaging:
- 5pcs/pack
IPS e.max Press MO L/3 pcs
IPS e.max Press MO are disilicon-lithium glass ceramic pellets for stamping technology. The latest production technology allowed us to obtain absolutely hemogenic material, which is available in the form of lozenges with various degrees of opaqueness.
Indications:
- Crowns in the anterior and lateral sections.
- Three-unit bridges in the anterior region.
- Three-point bridges in the posterior section, to the second transmolar tooth as the last abutment tooth.
- Pressing on single galvanic crowns.
- Primary telescopic crowns.
Characteristics:
- Bending strength 400 MPa.
- MO lozenges with medium opacity are available in 5 colors.
- MO 0 for shades BL 1, BL 2, BL 3, BL 4 for whitened teeth.
- MO 1 for colors A- D A1, A2, B1, B2, C1.
- MO 2 for colors A- D A3,A3,5.
- MO3 for colors A- D B3,B4.
- MO4 for colors A- D A4,C2,C3,C4,D2,D3,D4.
- ...