Categories
EVE Stone Diacon DI-R22m
Diamond impregnated grinding system
Description:
- A special stone for the reduction of porcelain, lithium and zirconium disilicate.
- It is particularly suitable for veneers and for the preparation of the crown margins.
- It allows for precise reduction of veneers and crown edges without the risk of chipping.
- Effective material reduction while obtaining a pre-polished surface.
- Low wear thanks to the hard bond.
- Reduced heat conduction.
Technical data:
- 22x2mm
- optimal working range 10,000 - 15,000 rpm, max 20,000 rpm
Package:
- 1 piece
Exhausting air from the Silent V4 hood
Exhaust air from the Silent V4 hood to the outside
Renfert catalog number 29330002
Packaging:
- 1 piece
Exocad® DentalCAD Elefsina 3.2 version CORE design software
Exocad® DentalCAD Elefsina 3.2 (latest version: February 24, 2024) the most frequently chosen CAD software by laboratory scanner manufacturers. A great tool for beginners, which in the hands of experienced users offers enormous possibilities. The CORE license is for life and does not require an annual subscription fee.
EXOCAD has become famous in the CAD/CAM industry for its speed and ease of use, which significantly reduces implementation costs and maximizes productivity. It is a reliable and solid tool in everyday work, even in the most advanced cases.
Exocad software is sold in a modular system, but the basic CORE version offers enormous possibilities that will meet most everyday needs.
New features in Elefsina 3.2, greater automation and seamless integration:
As part of the basic module, you can design:
- Anatomical and reduced frameworks
- Anatomical and reduced crowns
- Structures up to 16 po ...
Extreme - Wet turbine with LED lighting
Turbine with a water jacket and led lighting, designed for working with zirconium. Water cooling of the processed zirconium crowns significantly reduces the temperature on their surface, which minimizes the risk of microcracking, increasing the patient's safety and minimizing the risk of breakage due to processing after the sintering process.
Built-in LED lighting facilitates precise processing of the object.
The built-in "Anti Dust" mechanism extends the life of the turbine by minimizing the amount of dust that can enter its interior during operation.
It is possible to purchase the device in the DUAL version with a built-in brushless prosthetic handpiece [50,000 rpm, power: 7.5Ncm]. Miccode: 6296
Features:
- high power turbine with LED lighting for zirconium processing
- turnover max. 150,000 rpm
- power 4.0 Ncm
- dimensions of the turbinate diameter 25 mm, length 101 mm
- drill chuck d ...
Eyelet buckles 0.7mm/1pc
Buckles with a 0.7mm eyelet.
Characteristics:
- Hardness class spring-hard 1800-2000 MPa.
Packaging:
- 1 piece.
Fabric filter for Vortex extractor hood
Fabric filter for Vortex extractor hood.
Renfert catalog number 29245005
Packaging:
- 1 piece
Fahnenstock 17 cm wax knife
Fahnenstock large 17 cm wax knife with a wooden handle.
Package:
1 piece.
...Fahnenstock wax knife 13 cm
Small Fahnenstock wax knife 13cm with a wooden handle.
Package:
1 piece.
...fan screw
Stainless steel fan screw for moving the teeth across the dental arch.
Characteristics:
- For moving teeth across the dental arch in the anterior region of the maxilla.
- The elements of the plate open in a fan shape.
- Travel distance 7mm.
Packaging:
- 1 piece.
Felt cone 20x10mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 20x10mm.
Packaging:
- 1 piece.
Felt cone 25x15mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 25x15mm.
Packaging:
- 1 piece.
Felt cone 30x15mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 30x15mm.
Packaging:
- 1 piece.
Felt cone 35x20mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 35x20 mm.
Packaging:
- 1 piece.
Felt cone 40x20mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 40x20 mm.
Packaging:
- 1 piece.
Felt cone 45x25mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 45x25mm.
Packaging:
- 1 piece.
Felt cone 50x20mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 50x20mm.
Packaging:
- 1 piece.
Felt cone 50x25mm 1 piece
Felt cone made of high-quality wool felt in various lengths - unassembled. Also for use on a polishing spindle.
- Dimensions 50x25mm.
Packaging:
- 1 piece.
Felt mounted on a mandrill - various shapes
Felt cone made of high-quality felt - mounted on a pin to the handpiece.
- Different shapes.
Packaging:
- 1 piece
Fillin 60g silicone material for locking on the model
Reusable silicone material used to lock onto the model. It is perfect as a blocker when making whitening splints.
Packaging:
- 1pc - 60g
Fine filter for Vortex extractor 1 piece
Fine filter for Vortex prosthetic hood.
Renfert catalog number 29245004
Packaging:
- 1 piece
Finishing liquid 250ml - liquid for shining Drufosoft foil
Universal liquid for polishing rails made of soft thermoformed materials. (whitening splints, protectors for athletes)
Zatets:
- simple to use.
- super shiny rail
- pleasant eucalyptus scent.
Directions for use:
- 1 layer, put on a paper towel and rub firmly into the rail.
- Gently apply the 2nd layer to the surface of the rail.
Packaging:
- 250 ml.
Fischer Magnum screw 1 piece or 100 pieces
Stainless steel screw for moving teeth across the Magnum dental arch.
Characteristics:
- Very thick screw with a larger shank.
- With guide.
- For moving teeth across the maxillary dental arch and bimaxillary orthodontic appliances. - Bright yellow plastic arrow.
- Screw shank with transverse notches that ensure optimal retention in the material.
- Limitation after reaching maximum travel.
- Travel distance 11mm.
Packaging:
- 1 piece or 100 pieces
Fischer screw Medium 1 piece or 100 pieces
Stainless steel screw for moving teeth across the dental arch - Medium.
Characteristics:
- With guide.
- For moving teeth across the dental arch and distalizing them in the maxilla and mandible.
- Bright yellow plastic arrow.
- Screw shank with transverse notches that ensure optimal retention in the material.
- Limitation after reaching maximum travel.
- Travel distance 7.5mm.
Packaging:
- 1 piece.
Fischer screw Mini 1 piece or 100 pieces
Stainless steel screw for moving teeth across the dental arch - Mini.
Characteristics:
- With guide.
- For moving teeth across the dental arch and distalizing them in the lower jaw or very narrow maxilla.
- White plastic arrow.
- Screw shank with transverse notches that ensure retention in the material.
- Limitation after reaching maximum travel.
- Travel distance 6.5mm.
Packaging:
- 1pcs or 100pcs
Fixtemp C+B 4:1 50ml
The highest quality material for temporary crowns and bridges.
Application:
- Temporary crowns and bridges.
- Inlay/onlay restorations.
Material data:
- Processing time 0:45 min.
- Curing time approx. 2:00-3:00 min.
- End of hardening approx. 6:00 min.
- Compressive strength ≥ 200 MPa
- Bending strength ≥ 60 MPa
Packaging:
- 50 ml in 4:1 proportions
- 10 mixing tips
FLEXIFLEX diamond separator 0.19mm
Super flexible double-sided separator for separating and contouring ceramics.
Characteristics:
- Mounted on a mandrel.
- Diameter 22mm
- Thickness 0.19mm
- Green stripe.
- Application: from 5 to 10,000 rpm.
Packaging:
- 1 piece.
Fluted wax grave 0.5mm
Textured casting wax (mocha) green, BEGO.
Characteristics:
- Thickness 0.5mm.
- Clearly veined.
- Plate 15x7.5 cm.
- Proven modeling wax for modeling maxillary skeletal denture plates.
- The wax texture gives the denture plate a more anatomical surface.
- It adapts well and adheres exactly to the model.
Packaging :
- 15pcs/pack
Fluted wax, thick 0.6 mm
Textured casting wax (morka) green, clearly veined, thickness 0.6mm 15x7.5cm.
Features:
- Proven wax for modeling of maxillary skeletal dentures.
- The wax texture gives the denture plate a more anatomical surface.
- It adapts well and adheres exactly to the model.
Package:
15 items / box
...Foil cutter with replaceable tips
Knife with replaceable tips. Very sharp.
Dimensions:
- (LENGTH x WIDTH x H) | APPROX. 148 X 8.2 X 8.2 mm
Packaging:
- 1 piece.
Formlabs Permanent Crown resin 1L
Permanent Crown resin is a dental, biocompatible material for 3D printing in SLA technology. The material in the natural color of tooth enamel is suitable for the production of permanent, full-contour prosthetic restorations. Permanent Crown resin is a hybrid material with a ceramic filling. The prints have a perfect fit, low water absorption and a smooth finish. Crowns made of this material have a low tendency to age, discolor or build up plaque. Permanent Crown resin is available in 4 VITA shades (A2, A3, B1, C2).
Application:
- Permanent single crowns.
- Cartridges.
- Inputs.
- Veneers.
Resin is a medical device as defined in the EU Medical Devices Directive (93/42/EEC) and Chapter 201(h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with temporary CB resin have been assessed according to ISO 10993-1:2018 (Part 1: Assessment and testing as part of the risk management process) and IS
...Formlabs resin Denture Base 1L - Resin for denture plates
Biocompatible resin for printing full dentures. Perfectly fitted dentures faster and cheaper. Long-term, biocompatible class IIa resins enable dentists and technicians to manufacture full dentures using 3D printing technology.
Denture Base resin has been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins have received the biocompatibility class confirmed by the standards: EN-ISO 10993-1: 2009 / AC: 2010:
- Not mutagenic.
- Non-cytotoxic.
- It does not cause erythema or edema reactions.
- It is not allergenic.
- Does not cause systemic toxicity.
ISO standards for Denture Base: - EN-ISO 20795-1: 2013 (Dentistry - Base Polymers - Part 1: Denture Base Polymers)
Colors:
- LT (Light Pink)
- OP (Original Pink)
- RP (Reddish Pink)
DP (Dark Pink)
Supported layer height: 50 micrometers.
- Curing required. ...
Formlabs resin Denture Teeth 1L
Denture Base and Teeth resins have been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins have received the biocompatibility class confirmed by the standards: EN-ISO 10993-1: 2009 / AC: 2010:
• Non-mutagenic. • Non-cytotoxic. • Does not cause erythematous or edema reactions. • Not sensitizing. • Does not cause systemic toxicity.
ISO standards for Denture Teeth:
• EN-ISO 22112: 2017 (Dentistry - artificial teeth for dentures) • Flexural strength, water absorption and water solubility in accordance with EN-ISO 10477 (Dentistry - Polymer-based crowns and veneering materials) type 2 class 2
Color:
- A1
- A2
- A3
- A3.5
- B1
- B2
Package:
- 1l
Formlabs resin for 3D printer Durable 1L
Durable resin (v2) simulating the properties of polypropylene (PP) is intended for products exposed to friction and wear. Thanks to its low modulus, high elongation and high impact strength, Durable resin prints are smooth, shiny and have good deformation strength. Use this material for applications that require minimal friction.
Packaging:
- 1000 ml
Formlabs resin for Castable 1L 3D printer
First class biocompatible material (EN-ISO 10993-1:2009/AC:2010, USP Class VI), intended for dentists to create precision surgical guides, dental models or similar details.
Packaging:
- 1 liter
Formlabs resin for Temporary CB 1L 3D printer
The material used for the production of temporary crowns, overlays, veneers and bridges in a natural enamel color. The material for printing requires the use of a stainless steel worktable. Supported layer height: 50 micrometers. Curing required.
Meets ISO standards:
EN ISO 10993-5: 2009 (non-cytotoxic)
ISO 10993-10: 2010 / (R) 2014 (non-irritating)
ISO 10993-10: 2010 / (R) 2014 (not sensitizing)
ISO 10993-3: 2014 (not genotoxic)
ISO 10993-1: 2009 (non-toxic)
Temporary CB resin is a medical device as defined in the EU Medical Device Directive (93/42 / EEC) and Chapter 201 (h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with CB provisional resin have been assessed according to ISO 10993-1: 2018 (Part 1: Assessment and testing as part of a risk management process) and ISO 7405: 2009 / (R) 2015 (Dentistry - Biocompatibility Assessment).
Technical data:
Density: 1.4 -
...
Formlabs resin for the 3D printer Dental Model V2 1l
Designed for printing models of crowns and bridges with replaceable dies, Dental Model V2 is a resin with high precision and accuracy. Print the finest details down to 35 microns and removable stencils with a consistent fit. The smooth, matte surface finish and plaster-like color make it easy to switch from analog to digital model production.
Packaging:
- 1 liter
Formlabs resin for the BioMed Durable 1L 3D printer
BioMed Durable Resin is a transparent material for biocompatible applications requiring impact, shatter and abrasion resistance.
This USP Class VI material is manufactured in an FDA, ISO 13485 registered facility and can be used in long term skin contact and short term tissue, bone and dentine contact applications.
Resin dedicated to 3D printers from the Form 3B series. is compatible with the Form 3B, Form 3B+ and Form 3BL models and can be used in medical facilities for the production of devices and instrumentation as well as in dental and orthodontic laboratories.
In order for physicians and manufacturers to rely on this new material in contact with patients, Formlabs strictly followed USP Class VI procedures to be certified for use in long-term skin applications (greater than 30 days) and short-term contact with tissue, bone and dentin (less than 24 hours). The Formlabs manufacturing facility is ISO 13485 compliant and strict quality control measures are rigo
...Formlabs Resin Tank - resin container for FORM 3
Formlabs Resin Tank - resin cuvette.
Package:
- 1 piece
Forms for the bases of plaster models 6 pcs.
Base for pouring 6 pcs. Set. 3 sizes top and bottom in the package
Package:
set
...Forte 200 α prosthetic micromotor
Saeshin Forte 200 α prosthetic micromotor. Brushless micromotor. High speed control function (up to 50,000 rpm) and high power minimize vibrations, providing enough power even at low speeds.
Characteristics:
- Handpiece weight 254 g
- Knee type.
- Ergonomic.
- Excellent durability.
- Minimal noise and vibration.
- Maximum efficiency.
- Built-in microprocessor (self-diagnosis, error signalling, working memory storage and handpiece auto-recognition functions)
- Right/left rotation of the micromotor.
- 50000rpm
- Max. torque: 7.8N.cm.
- Power 230W.
- 12 months warranty
Packaging:
- 1 piece
Fujirock EP Classic Golden Brown plaster 5 kg
GC Fujirock EP is a class 4 plaster of the highest quality. Designed to perform all prosthetic works, with the highest precision, exceptional hardness and resistance to deformation. Very high plasticity while being thixotropic, excellent handling and pouring without air bubbles. Scanable.
Physical data:
- Golden-brown color.
- Setting time 10-13 min.
- Expansion after setting after 2 h ≤ 0.09%.
- compressive strength after 1 hour approx. 53 MPa.
Packaging:
- 5kg.
Fujirock EP Premium Line Pastel Yellow plaster 11kg
GC Fujirock EP Premium Line Super Hard Plaster, Pastel Yellow - 11kg
Class IV plaster. For high-precision techniques such as implant work and complex all-ceramic work. Improved plaster composition and improved color setting. Scanable.
Physical data:
- Pastel yellow color.
- Setting time 9-12 min.
- Expansion after setting < 0.09%.
- Compressive strength after 1 hour approx. 60 N/mm.
Packaging:
- 11 kg
Fujirock EP Premium Line Pastel Yellow plaster 4 kg
GC Fujirock EP Premium Line Super Hard Plaster, Pastel Yellow - 4kg
Class IV plaster. For high-precision techniques such as implant work and complex all-ceramic work. Improved plaster composition and improved color setting. Scanable.
Physical data:
- Pastel yellow color.
- Setting time 9-12 min.
- Expansion after setting < 0.09%.
- Compressive strength after 1 hour approx. 60 N/mm.
Packaging:
- 4kg
Fujirock EP Premium Line Titanium Gray plaster 4 kg
Gypsum class IV For highly precise work on implants and complex all-ceramic work. Improved plaster composition and improved color setting. Scanable.
Physical data:
- Grey colour.
- Setting time 9-12 min.
- Expansion after setting after 2 hours approx. 0.09%.
- Compressive strength after 1 hour approx. 60 N/mm2.
Packaging:
- 4kg
FujiRock IV class EP Classic Golden Brown plaster 12kg
GC Fujirock EP - super hard plaster type IV. Very break-resistant, liquid. Stable at the edges, long processing time, short setting. Very high plasticity with simultaneous thixotropic properties, excellent handling and pouring without air bubbles. Scanable.
Physical data:
- Powder/liquid ratio - 20 ml : 100 g.
- Mixing by hand - 15 seconds.
- Vacuum mixing - 45 seconds.
- Golden-brown color.
- Setting time 10-13 min.
- Expansion after setting after 2 h ≤ 0.09%.
- compressive strength after 1 hour approx. 53 MPa.
Packaging:
- 12kg