Categories
EcoTray LC Premium light-curing material for individual trays NEW
EcoTray LC Premium, a new high-quality light-cured material for individual trays.
Polymerization:
- Wavelength of polymerization light 300-400nm
- Polymerization minimum UV/halogen 3-5 minutes
- It is recommended to polymerize in devices polymerizing with UV light with a minimum power of 36 watts
Characteristics:
- High dimensional stability.
- Break-resistant.
- Thickness approx. 2 to 2.4 mm.
- Very low shrinkage (2.08 vol%)
- Low water absorption (<0.1%)
- Pink color.
Application:
- Individual impression trays.
- Base plates for wax-up.
- Functional individual trays for impressions under crowns and bridges.
- Bite plates for bite registration.
Safety tip:
- Light-curing tiles contain methacrylates, which are a potential contact allergen. To avoid direct cont ...
EcoWax hard modeling wax 500g
Medium hard modeling wax. Wax that is stable at high temperatures, ensuring more precise fit of the denture and lower risk of deformation in the patient's mouth. Perfect for high quality work.
Composition:
- A mixture of paraffin waxes.
Characteristics:
- Light pink color.
- Operating temperature: 36- 42°C.
- Melting point: 50°C.
- Sheet dimensions: 187 x 88 x 1.5 mm.
Benefits:
- Easy to use and process.
- It softens without crumbling and does not stick to fingers.
- It does not deform in the mouth.
- Does not cause irritation.
- Neutral smell and taste.
- High gloss after finishing.
Packaging:
- 500g (21 sheets)
EcoWax soft modeling wax 500g
Soft modeling wax for making, among others: short-circuit billets and formers.
Composition:
- A mixture of paraffin waxes.
Characteristics:
- Color: translucent pink.
- Operating temperature: 36- 42°C.
- Melting point: 50°C.
- Sheet dimensions: 187 x 88 x 1.5 mm.
Benefits:
- Easy to use and process.
- It softens without crumbling and does not stick to fingers.
- It does not deform in the patient's mouth.
- Does not cause irritation.
- Neutral smell and taste.
- High gloss after finishing.
Packaging:
- 500g (21 sheets)
Edelweiss polishing paste in a stick 80g
Edelweiss stick polishing paste for acrylic
Package:
80g
...Electrol I 1000ml
Elektrol I fluid for electrolytic polishing of Cr-Co-Mo dental alloys in skeletal dentures.
CAUTION - The product is sensitive to sudden changes in temperature.
Polishing conditions:
- Current - 2A
- Temperature 30 - 40 °C
- Polishing time 5 - 10 min.
Packaging:
- 1000 ml.
Electrolyte 2000ml
Liquid for high-gloss electrolytic polishing of chrome-cobalt steels in electropolishing machines.
Renfert catalog number 15241000
Advantages:
- Special additives ensure time savings and high efficiency during electrolytic polishing.
- For all devices with electrodes made of copper, precious metals or titanium.
Packaging:
- 2000 ml
Electronic thickness gauge
Digital caliper for accurate and quick measurement of the wall thickness of the crown. The caliper is easy to use and displays the measurement result immediately.
Package:
- 1 piece.
Elite Double 22 1kg + 1kg FAST
Addition silicone for duplicating models in the fabrication of skeletal dentures and other laboratory work. Orange silicone mechanical mixing time 30 sec, manual mixing time 1 min, setting time 10 min.
Characteristics:
- Ease of mixing.
- Perfect fluidity.
- Perfect reproduction of details.
- Long-term dimensional stability and resistance to deformation.
- Compatible with all types of gypsum, polyurethane resins, molding compounds and acrylic resins.
- Hardness after setting 22 Shore - A
Package:
1kg + 1kg.
...Elite Double 22 silicone 1kg + 1kg
Addition silicone for duplicating models when making skeletal dentures and other laboratory work.
Characteristics:
- Green color.
- Mixing time 4-6 minutes.
- Setting time 20 minutes.
- Easy to mix.
- Excellent fluidity.
- Perfect reproduction of details.
- Long-term dimensional stability and resistance to deformation.
- Compatible with all types of gypsum, polyurethane resins, molding sands and acrylic resins.
- Hardness after curing 22 Shore - A
Packaging:
- 1kg + 1kg.
Elite Double 32 Fast 1kg + 1kg
Characteristic:
Tensile and tear-resistant, also at low thicknesses
Accuracy of mapping details
High liquidity
High dimensional stability over time
High material memory
Technical data:
Mixing ratio 1: 1
Manual mixing time 1 min.
Time of mechanical mixing in a vacuum mixer 30 sec.
Working time 5 minutes.
Total setting time 10 min.
Shore A hardness 32.
Package:
- 1 kg +1 kg.
Elite Double 8 1kg + 1kg
Addition silicone for duplicating models in the fabrication of skeletal dentures and other laboratory work.
Characteristics :
- Very high tear resistance of 320%.
- Ease of mixing.
- Perfect fluidity.
- Perfect reproduction of details.
- Long-term dimensional stability and resistance to deformation.
- Compatible with all types of gypsum, polyurethane resins, molding compounds and acrylic resins.
- Hardness - 8 Shore - A
Package:
- 1kg + 1kg.
Elite Glass 2x50ml. + 6 mixing tips
Elite Glass is an addition silicone for the production of transparent forms intended for the polymerization of light-curing materials used for direct and indirect aesthetic restoration.
High transparency and adequate working time make Elite Glass particularly effective in various clinical situations: for molding directly in the patient's mouth (e.g. in case of discoloration) or indirectly, on the model (e.g. closing diastema, correction of rotated teeth, enamel cracks) , abnormalities in the structure of the tooth, temporary crowns).
Package
- 2x50 ml + 6 mixing tips
Elite HD + II layer
Elite HD + II layer hydrocompatible silicone addition impression material of low viscosity (light) and medium (regular) intended for the second layer of two-layer, two-time and simultaneous impressions. The selection of contrasting material colors allows you to see the smallest details. Elite HD + impression materials have excellent plasticity, high dimensional stability and tear resistance.
Characteristic:
- Mixing ratio 1: 1.
- Hydrocompatible.
- Thixotropic.
- Blue (light), purple (regular) colors.
- For dispensing into the impression material gun.
Package:
- 2x 50ml.
- 12 mixing tips.
Elite HD + Putty Normal 250ml + 250ml
Elite HD + Putty - silicone additive impression material for the first layer of double-layer impressions. The use of innovative nanotechnology enables very precise mapping of details. The mass is characterized by fluidity, tensile strength, resistance to deformation and temperature. Thanks to its properties, it is possible to accurately reproduce even in a humid environment.
Characteristic:
- For hand mixing.
- High precision and dimensional stability.
- High hardness after setting.
- Orange color.
Package:
250ml base + 250ml catalyst.
...Elite LC Tray, 50 pcs spoons, pink color
Elite LC Tray is a line of light-curing resins for individual impression trays. Also recommended for the fabrication of base plates for setting teeth and bite plates in removable dentures.
The Elite LC Tray can be used to create base plates and individual paddles in a variety of sizes to meet the most important requirements of dental technicians.
Characteristic:
Cured with halogen light or UV light (3-5 minutes)
Stable in daylight or artificial light for approx. 20:00 min
Available in pink
Minimal polymerization shrinkage
End fittings for exhaust manifold
Set of end sleeves for the splitter.
Renfert catalog number 29210003
Packaging:
- 2 pieces
Eraser disc green BEGO 1 piece or 100 pieces
Green erasers for polishing precious and base metal alloys.
Characteristics:
- Green color.
- Diameter 22x3.5mm (disc).
- max speed 10,000 rpm.
Packaging:
- 1 pc or 100 pcs
Eraser, black lens, 22mm, 1 piece
Universal metal eraser.
- Soft and flexible eraser for smoothing precious and base metal alloys.
Description:
- Dimensions 22.0 mm x 4.0 mm.
- Recommended operating speed 7,000 - 12,000 rpm.
- To be mounted on a mandrel.
Packaging:
- 1 piece
Eraser, green lens, 22mm, 1 piece
The green Eveflex eraser is intended for processing precious and base metals to obtain a high gloss.
Description:
- Dimensions: width 22.0 mm and thickness 4.0 mm.
- Recommended operating speed 7,000 - 12,000 rpm.
- To be mounted on a mandrill.
Packaging:
- 1 piece
ERGO Ceramic modeling tip
Ergo porcelain modeling tip for the ERGO CERAMIC instrument.
Renfert catalog number 11611210
Packaging:
- 1 piece.
Ergo Ceramic modeling tip 2 pcs
Ergo Ceramic porcelain modeling tip.
- Thin spiral needle.
Renfert catalog number 11611220
Packaging:
- 2 pcs.
Ergo Ceramic modeling tip, 2 pieces
Modeling tip for Ergo Ceramic.
- A large knife.
Renfert catalog number 11611110
Packaging:
- 2 pcs.
Ergo Ceramic number 1 Modeling instrument 1 pc
Ergo Ceramic ceramic modeling instrument, with replaceable tips.
Renfert catalog number 11611100
Advantages:
- Tool No. 1: Large separating and reducing blade (replaceable). Large claw-shaped scraper for precise resection when shaping the tooth shape.
Packaging:
- 1 piece.
Erkodent wax for blocking undercuts
High-melting wax intended for blocking undercuts in the deep molding technique.
Very easy to model.
Transparent.
Packaging:
- 50g
Erkoskin 50ml
Erkoskin is a self-curing material that creates a film layer on the plaster model.
Advantages:
It has long-lasting elasticity and is resistant to tearing.
It is resistant to acids and alkalis.
You can remove it without leaving any residue.
Packaging:
- 1pc/50ml.
Estetic H for crowns and bridges
Estetic H acrylic material for making crowns and bridges, cured with heat.
Characteristics:
- It is an ideal material for making sheath crowns and veneering crowns and bridges.
- It can be used to make teeth in settling and skeletal dentures.
- Requires short polymerization time.
- It is characterized by low water and saliva absorption, thanks to which its color does not change.
- It ensures obtaining the perfect color of prosthetic restorations thanks to the rich color palette.
Packaging :
- Dentine 50g.
- Neck 25g.
- Glaze 25g.
- Liquid 50ml.
Estetic hot acrylic 500g
Estetic acrylic material for making denture plates, polymerizing hot.
Available colours:
- 0 colorless
- 8 pink without veins
- 10 pink without veins
- 8V pink with veins
- 10V pink with veins
Characteristics:
- requires short polymerization time,
- characterized by low water and saliva absorption,
- excellent plasticity and ease of shaping under the pressure of the press does not increase the short-circuit,
- can be combined with soft, flexible bedding,
- translucency of the mass allows to bring out the natural color of the patient's mucosa,
- meets the requirements of the PN-EN ISO 20795-1 standard.
Technical data:
- mixing ratio: powder/liquid weight - 2:1,
- dough preparation time: 10-15 minutes,
- dough shelf life: 15 minutes,
- residual monomer content: 1.33%,
- breaking ...
Estetic ort 2kg+1l
Estetic Ort, material for making orthodontic appliance plates.
- Colorless.
- Working with the method of applying plastic mass.
- Pouring powder onto the model and soaking it with monomer ("salt and pepper").
- Easily tinted with Estetic Ort Kolor liquid dyes.
- Meets the requirements of the PN-EN ISO 20795-2 standard.
Technical data:
- Mixing proportions: powder/liquid by weight - 3:1.
- Dough preparation time: 2-5 min.
- Dough shelf life: 2.5 min.
- Polymerization process: 20 min., 40-50°C; 2 bars.
- Breaking strength: 66.5 MPa.
- Bending elasticity: 2043 MPa.
- Solubility: 2.6 μg/mm3.
- Sorption: 12.0 μg/mm3.
Packaging:
- 2 kg + 1 l.
Estetic Ort color concentrates
Estetic Ort coloring concentrates.
Characteristics:
- Concentrates for coloring the material for making orthodontic appliance plates.
- colors; orange, red, yellow, blue.
Packaging:
- 4x12.5ml.
Estetic Ort liquid 1000ml
Estetic Ort cold liquid for orthodontic braces.
- Colourless.
Packaging:
- 1000 ml
Estetic Ort liquid 250ml
Estetic Ort cold liquid for acrylic for orthodontic braces.
- Colourless.
Packaging:
- 250ml.
Estetic Ort powder 2000 g
Estetic Ort, a material for making orthodontic plates.
- Colourless.
- Working with the method of applying plastic mass.
- Pouring powder on the model and soaking with monomer ("salt and pepper").
- It is easily dyed with Estetic Ort Kolor liquid dyes.
- Meets the requirements of the PN-EN ISO 20795-2 standard.
Technical data:
- Mixing ratio: powder/liquid weight - 3:1.
- Dough preparation time: 2-5 minutes.
- Dough life: 2.5 minutes.
- Polymerization process: 20 min., 40-50°C; 2 bars.
- Breaking strength: 66.5 MPa.
- Flexural strength: 2043 MPa.
- Solubility: 2.6 μg/mm3.
- Sorption: 12.0 μg/mm3.
Packaging:
2000g
...Estetic Ort powder 500g
Estetic Ort, a material for making orthodontic plates.
- Colourless.
- Working with the method of applying plastic mass.
- Pouring powder on the model and soaking with monomer ("salt and pepper").
- It is easily dyed with Estetic Ort Kolor liquid dyes.
- Meets the requirements of the PN-EN ISO 20795-2 standard.
Technical data:
- Mixing ratio: powder/liquid weight - 3:1.
- Dough preparation time: 2-5 minutes.
- Dough life: 2.5 minutes.
- Polymerization process: 20 min., 40-50°C; 2 bars.
- Breaking strength: 66.5 MPa.
- Flexural strength: 2043 MPa.
- Solubility: 2.6 μg/mm3.
- Sorption: 12.0 μg/mm3.
Packaging:
- 500g
Estetic Ort set 500g/250ml
Estetic Ort, a material for making orthodontic plates.
- Colourless.
- Working with the method of applying plastic mass.
- Pouring powder on the model and soaking with monomer ("salt and pepper").
- It is easily dyed with Estetic Ort Kolor liquid dyes.
- Meets the requirements of the PN-EN ISO 20795-2 standard.
Technical data:
- Mixing ratio: powder/liquid weight - 3:1.
- Dough preparation time: 2-5 minutes.
- Dough life: 2.5 minutes.
- Polymerization process: 20 min., 40-50°C; 2 bars.
- Breaking strength: 66.5 MPa.
- Flexural strength: 2043 MPa.
- Solubility: 2.6 μg/mm3.
- Sorption: 12.0 μg/mm3.
Packaging:
- 500g + 250ml.
Estetic S for repairs 100g / 50ml
Estetic S acrylic resin for cold curing.
Available colours:
0 colorless
8 pink without veins
10 pink without veins
8V pink veined
10V pink veined
Features:
- For repairing dentures.
- High-quality material at a low price.
Package:
- 100g / 50ml
Estetic S for repairs, powder 500g
Estetic S acrylic material intended for cold polymerization.
Characteristics:
- For repairing dentures.
- High quality material at a low price.
Technical data:
- mixing ratio: powder/liquid weight - 2:1,
- dough preparation time: 2-5 minutes,
- dough shelf life: 3.5 minutes,
- polymerization process: 20 min.; 40-50°C; 2 bars,
- residual monomer content: 3.46%,
- breaking strength: 62.5 Mpa,
- bending elasticity: 2043 MPa,
- solubility: 2.6 μg/mm3,
- sorption: 23.8 μg/mm3.
Available colours:
0 colorless
8 pink without veins
10 pink without veins
8V pink with veins
10V pink with veins
Packaging:
- 500 g. powder
Estetic S repair fluid 250ml
Estetic S, liquid for repairing dentures for cold polymerization.
Packaging:
- 250ml.
Estetic Special for temporary laces 100g / 50ml
Estetic Special, a fast curing acrylic material intended for the fabrication of temporary crowns and bridges.
Package:
75 g dentin 25 g enamel 50 ml liquid
...Eve Eco-Chrom discs
EcoChrom eraser for metal, very durable.
Characteristics:
- Brown color
- Diameter 22x3mm
- Speed 8,000- 15,000 rpm. max. 20,000 rpm
Packaging:
- 1 piece
EVE Stone Diacon DI-13m
Diamond impregnated grinding system
Description:
- A special stone for the reduction of porcelain, lithium and zirconium disilicate.
- It is particularly suitable for veneers and for the preparation of the crown margins.
- It allows for precise reduction of veneers and crown edges without the risk of chipping.
- Effective material reduction while obtaining a pre-polished surface.
- Low wear thanks to the hard bond.
- Reduced heat conduction.
Technical data:
- 4x10mm
- optimal working range 10,000 - 15,000 rpm, max 20,000 rpm
Package:
- 1 piece
EVE Stone Diacon DI-L26m
Diamond impregnated grinding system
Description:
- A special stone for the reduction of porcelain, lithium and zirconium disilicate.
- It is particularly suitable for veneers and for the preparation of the crown margins.
- It allows for precise reduction of veneers and crown edges without the risk of chipping.
- Effective material reduction while obtaining a pre-polished surface.
- Low wear thanks to the hard bond.
- Reduced heat conduction.
Technical data:
- 26x2.5mm
- optimal working range 10,000 - 15,000 rpm, max 20,000 rpm
Package:
- 1 piece
EVE Stone Diacon DI-R17m
Diamond impregnated grinding system
Description:
- A special stone for the reduction of porcelain, lithium and zirconium disilicate.
- It is particularly suitable for veneers and for the preparation of the crown margins.
- It allows for precise reduction of veneers and crown edges without the risk of chipping.
- Effective material reduction while obtaining a pre-polished surface.
- Low wear thanks to the hard bond.
- Reduced heat conduction.
Technical data:
- 17x3mm
- optimal working range 10,000 - 15,000 rpm, max 20,000 rpm
Package:
- 1 piece