Class IIa biocompatible resin with high peel and wear resistance, making Dental LT Clear ideal for splints, attachments and other direct orthodontic devices. Thanks to the transparent color, high optical transparency is achieved for beautiful final products.

• The material has been assessed according to ISO 10993-1:2018.

Application:

• Occlusal splints.
• Retention appliances.
• Occlusal overlays.
• Surgical splints and guides.
• Fastening elements.
• Other orthodontic accessories.

Material properties:

• Bending modulus 2300 MPa.
• Elongation at break 12%.
• Shore hardness: 78D.
• Color transparent.

Packaging:

• 1 liter

Form Wash, a washer for cleaning models from resin residues.

• Automatic washer for cleaning models from uncured resin residues using SLA technology.
• Post-processing device compatible with Formlabs Form 2 3D printers.
• The rotor circulates isopropyl alcohol (IPA), which ensures effective and efficient rinsing of unnecessary material in every detail.
• The washer is equipped with a special handle, thanks to which we can move the work platform with prints and mount it directly in the washer or remove the model from the work table and place it in the basket.

Advantages:

• Automatic cleaning - the device will remove the model from the bath after finishing work.
• 15 minutes - average cleaning time for fresh isopropyl alcohol.
• 8.6 l - tank volume.
• 70 prints - the number of cleaned prints for one tank refill.
• The device's mechanism will automatically remove the models from the IPA after a specified period of time, which is set on a timer. This reduces the risk of damaging the print due to too long soaking in IPA. The models are dry and ready without user participation in the post-processing process.

Packaging:

• 1 piece.

Form Cure light polymerization lamp.

Advantages:

• 80 °C - an advanced heating system precisely controls the curing temperature.
• 405 nanometers - optimal wavelength of light for hardening models made of Formlabs materials.
• 13 multi-directional LEDs emit constant light.
• 1 revolution per minute - the rotary table ensures uniform exposure of each model.

Exposure improves the properties of photopolymer resin prints:

• Standard resins achieve better mechanical strength
• Engineering resins require irradiation to achieve the declared mechanical values
• Casting resins allow for cleaner firing
• Curing biocompatible resins is essential for applications in medicine and dentistry
• The heating system heats the chamber to ensure optimal curing conditions.

Packaging:

• 1 piece.

Resin container compatible with Formlabs Form 2 printer. Sufficient for approx. 20 refills with resin.

Package: 1 pc.

Long life resin container recommended for use with Formlabs Form 2 printer. The manufacturer declares 10 \ u201320x more cycles than for a standard container.

Package:

• 1 piece.

First class biocompatible material (EN-ISO 10993-1:2009/AC:2010, USP Class VI), intended for dentists to create precision surgical guides, dental models or similar details.

Packaging:

• 1 liter

Resin for jewelry and dental prosthetics.

• Does not require light polymerization after printing.

The original Castable Wax Resin is intended for the production of lost models in foundry. The material contains 20% wax and, thanks to its properties, does not leave any residue after firing and reflects the contour of the form well. Suitable for precision casting, it allows you to reproduce complex surfaces without visible layer lines. After printing, the models do not require additional hardening.

Also recommended for dental prosthetics:

• Crowns.
• Bridges.
• Partial dentures.
• Skeletons.

Packaging:

• 1L

The printing material in SLA technology is a liquid photopolymer resin hardened with a laser beam. Formlabs standard materials are the most universal resins for all applications. Strandard resins maintain high model accuracy without the risk of losing strength. Stiffness, durability, the ability to produce advanced details and the final smoothness of the print contribute to the wide use of the resin both in various industries and in medicine.

Colors:

• Transparent (Clear)
• White
• Gray (Grey)
• Black

Application:

• Conceptual models and prototypes.
• Transparent elements.
• Models requiring a smooth surface.

Physical data:

• Tensile strength 63 PMa.
• Elongation at break 6%
• Shore hardness D75.
• Modulus of elasticity 2.2 GPa.

Packaging:

• 1l

Light-curing resin for printing skeletons. It burns out without a trace. Red transparent color. The material is highly compatible: it can be used with all commercially available embedding materials.

Material data:

• Bending strength ≥ 100 MPa
• Elongation at Break 7.5% -11%
• Modulus of elasticity ≥ 2000 MPa
• Final hardness 80-90 Shore D.
• Color red transparent
• Viscosity <0.3 Pa · s

Packaging:

• 1 kg.

Light-curing resin for printing the gingival mask. Durable soft and flexible. Perfectly combined with models made of resins for models.

Material data:

• Final hardness approx. 70 Shore A
• Pink color
• Recovery after 100% deformation
• Viscosity approx. 2 Pa · s
• Bending deformation> 40%

Packaging:

• 1 kg.

Light-curing resin for the production of implant templates. Dimensionally stable and biocompatible.

Material data:

• Blue transparent color
• Modulus of elasticity> 1.700 MPa
• Bending strength ≥ 75 MPa
• Elongation at Break> 10-15%
• Final hardness> 80-85 Shore D.

Packaging:

• 1 kg.

Light-curing resin for the production of implant templates. Dimensionally stable and biocompatible. Blue transparent color.

Material data:

• Blue transparent color
• Modulus of elasticity> 1.700 MPa
• Bending strength ≥ 75 MPa
• Elongation at Break> 10-15%
• Final hardness> 80-85 Shore D.

Packaging:

• 1 kg.

Specially developed for the new generation of printers with 385 nm. Light-curing resin for the production of dental models for orthodontics and prosthetics. Faster printing process due to higher efficiency and precision. It is also suitable for printing expert and demonstration models.

Material data:

• Final hardness sdf
• Modulus of elasticity ≥ 1900 MPa
• Bending strength ≥ 85 MPa
• Beige colour
• Viscosity 0.8-1.2 Pa · s
• Elongation at break ≥ 8%

Packaging:

• 1 kg

Optimized, biocompatible resin for the production of dental impression trays. High reactivity with low viscosity. Simplified cleaning and improved mechanical properties. Twice as fast printing time, possible layer thicknesses of 300 μm. The finished impression trays have a homogeneous surface, which significantly reduces manual rework.

Printing time and material consumption

• Print speed (mm/h): 51
• Print time/platform (min): 82
• Print time/bucket (min): 5.1
• Buckets/Vertical Platform: 16
• Material consumption (g/spoon): 15
• Absolute height (mm): 70
• Cost /spoon approx (€): 2.49

Material data:

• Flexural strength > 75 MPa
• Elongation at break > 5%
• Modulus of elasticity ≥ 2,000 MPa
• Final hardness > 80 Shore D
• Green color
• Viscosity approx. 1 Pa·s

Packaging:

• 1 kg.

Light-curing resin for the production of orthodontic appliances. The configuration models are perfect for the thermoforming technique.

Material data:

• Final hardness approx. 80-85 Shore D
• The color of the corn is yellow
• Modulus of elasticity ≥ 2,000 MPa
• Viscosity 1.2 Pa · s
• Bending deformation ≥ 11-15%
• Bending strength ≥ 95 MPa

Packaging:

• 1 kg.

LED-based laboratory device for curing 3D printed parts. Provides effective and deep hardening. Two different curing environments can be selected depending on the area of application. In addition, the appropriate nitrogen environment of PCU LED N2 provides cured components without an inhibition layer - for laboratory and medical devices.

Advantages:

• Open system with 10 freely programmable memories
• Easy operating concept thanks to the electronic control system
• Recording and monitoring of process parameters.

Package:

1 piece

Extremely precise phosphate investment, without graphite, Hinrivest RP was specially developed for casting printed skeletal dentures (rapid prototyping) and milled wax and resin parts in other printed works.

Benefits:

• Super fine structure.
• Creamy texture.
• Perfect match.
• Very smooth casting surface.

the manual for the product can be found under the photo of the product - click the PDF icon

Packaging: - 400 g

• Hinrivest RP liquid for 3D investment

Package:

• 1 l

Extremely precise phosphate investment, without graphite, Hinrivest RP was specially developed for casting printed skeletal dentures (rapid prototyping) and milled wax and resin parts in other printed works.

Benefits:

• super fine structure,
• creamy texture
• perfect match,
• very smooth casting surface

the instructions for the product can be found under the product photo - click the PDF icon Packaging:

50x400 g + 1000 ml liquid

Formlabs Resin Tank - resin cuvette.

Package:

• 1 piece

The material used for the production of temporary crowns, overlays, veneers and bridges in a natural enamel color. The material for printing requires the use of a stainless steel worktable. Supported layer height: 50 micrometers. Curing required.

Meets ISO standards:

EN ISO 10993-5: 2009 (non-cytotoxic)

ISO 10993-10: 2010 / (R) 2014 (non-irritating)

ISO 10993-10: 2010 / (R) 2014 (not sensitizing)

ISO 10993-3: 2014 (not genotoxic)

ISO 10993-1: 2009 (non-toxic)

Temporary CB resin is a medical device as defined in the EU Medical Device Directive (93/42 / EEC) and Chapter 201 (h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with CB provisional resin have been assessed according to ISO 10993-1: 2018 (Part 1: Assessment and testing as part of a risk management process) and ISO 7405: 2009 / (R) 2015 (Dentistry - Biocompatibility Assessment).

Technical data:

• Density: 1.4 - 1.5 g / cm3

  • Viscosity: 2500 - 6000 MPa * s

  • Bending strength (after hardening) 2,3,4: ≥ 100MPa

Package:

• 1l

Biocompatible resin for printing full dentures. Perfectly fitted dentures faster and cheaper. Long-term, biocompatible class IIa resins enable dentists and technicians to manufacture full dentures using 3D printing technology.

Denture Base resin has been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins have received the biocompatibility class confirmed by the standards: EN-ISO 10993-1: 2009 / AC: 2010:

• Not mutagenic.
• Non-cytotoxic.
• It does not cause erythema or edema reactions.
• It is not allergenic.
• Does not cause systemic toxicity.

ISO standards for Denture Base: - EN-ISO 20795-1: 2013 (Dentistry - Base Polymers - Part 1: Denture Base Polymers)

Colors:

• LT (Light Pink)
• OP (Original Pink)
• RP (Reddish Pink)

• DP (Dark Pink)

• Supported layer height: 50 micrometers.

• Curing required.

Package:

• 1l

Light-curing resin for creating highly aesthetic temporary restorations (long-term temporary restorations)

Advantages:

• Material for 3D printers with a high filler content - especially useful for long-term restorations.
• High flexural strength and modulus of elasticity for stable provisional restorations.
• High abrasion resistance ensuring long use.
• Low water absorption and solubility for mechanical stability.
• Discoloration resistance - no discoloration after long use.
• Natural fluorescence – for high aesthetic requirements.
• Easy to process and polish.
• Composite material for printers – quick characterization and adaptation.

Indications:

• Long-term temporary prosthetic restorations, e.g. crowns, bridges and mock-ups.

Packaging:

• 500g

For the isolation of printed models before making braces.

• Creates an insulating layer between the model and the acrylic.

Packaging:

• 100 ml

3D resin for printing dental models.

Colors:

• Beige.
• Grey.
• White.
• Super White.

DentaVision Form & Model resins are dedicated to printing dental models:

• Diagnostic models.
• Orthodontic models.
• Working models.
• Implant models.
• Show models.
• Models for thermoformable rails.

Technical data:

• Bending strength: 90+/- 5% MPa.
• Elastic modulus: 2600 +/- 5% MPa.
• Viscosity: 200+/- 5% cPs.
• Density: 1.15-1.18 g/cm3.

Advantages:

• Compatibility with open 385/405nm printer systems.
• Very good detail reproduction.
• Color stability.
• Dimensional stability after the polymerization process.
• Low viscosity.
• High durability.

COMPATIBLE PRINTERS:

• All with an open 385/405 nm material system, in particular:

• Phrozen Sonic Mini 4K

• Sonic Mini 8K
• Sonic Mighty 4K and others
• Anycubic Photon 4K, Mono X6K and others
• Asiga MAX385

Packaging:

• 1 kg

3D resin for printing dental models.

Colors:

• Beige.
• Grey.

DentaVision Form & Model resins are dedicated to printing dental models:

• Diagnostic models.
• Orthodontic models.
• Working models.
• Implant models.
• Show models.
• Models for thermoformable rails.

Technical data:

• Bending strength: 90+/- 5% MPa.
• Elastic modulus: 2600 +/- 5% MPa.
• Viscosity: 200+/- 5% cPs.
• Density: 1.15-1.18 g/cm3.

Advantages:

• Compatibility with open 385/405nm printer systems.
• Very good detail reproduction.
• Color stability.
• Dimensional stability after the polymerization process.
• Low viscosity.
• High durability.

COMPATIBLE PRINTERS:

• All with an open 385/405 nm material system, in particular:

• Phrozen Sonic Mini 4K

• Sonic Mini 8K
• Sonic Mighty 4K and others
• Anycubic Photon 4K, Mono X6K and others
• Asiga MAX385

Packaging:

• 200g

Printing resin stirrer for dental laboratories.

A practical and economical device for shaking resin bottles. Having the resin homogeneously mixed is essential to obtain a perfect printing result.

Benefits:

• The movement is doubled, making the mixing smooth and very efficient.

• Excessively vigorous movement will not affect the properties of the resin.

• Very quiet, has 6 rollers (length 28 cm) and allows you to adjust the rotation speed up to 70 rpm.

Speed:

• Min: 0 rpm (0 rad min-1)
• Max: 70 rpm (439.8 rad min-1)

Characteristic:

• Number of rolls: 6

• Roll length: 28 cm

• Load: 4 kg

• Roller rotation amplitude: 24 mm

• Power: 25W

• Voltage: 100-240 V, 50/60 Hz

• Height: 103mm

• Width: 253 mm

• Length: 480 mm

• Weight: 3.12 kg

Package:

• 1 piece

Due to its size and performance, the lamp is capable of curing materials used in the dental industry, including models printed on 3D printers.

Professional-quality polymerization The device emits constant, concentrated and uniform 360 ° UV light for fast curing of photopolymer resins. The secondary hardening process increases the hardness and strength of printed products.

Compact, simple and elegant design, with a rotating plate with a diameter of 18 cm, which guarantees even hardening for a large amount of work.

The Sun Beam 3D has a door design that provides very convenient access to inserting or removing models.

Control panel:

• Display showing power level, curing time or turntable setting.
• The timer appears on the display while it is curing.

Technical data:

• Chamber dimensions: Ø180 x 200 mm

• External dimensions: 225 x 225x x 352 mm

• Wavelength: 375 ~ 405 nm

• Weight: 3 kg

• Curing time: 1 - 60 minutes

• Rotation speed: 60 seconds / lap

Benefits:

• SUN BEAM 3D is equipped with UV LED lights.
• The light source does not produce ozone, it is environmentally friendly.
• The lamp consumes little electricity.
• Lamp life can be up to 10,000 hours, which is a long term safe purchase for your lab.

Package:

• 1 piece

Washer and lamp for printed models. It is a 2-in-1 device. It has the functions of rotary washing and curing. The use of this type of device is very convenient and saves time and space. Anycubic Wash & Cure Plus is compatible with most LCD 3D printers, including Elegoo Mars, Phrozen Sonic, or even larger printers, e.g. Anycubic Photon Mono X, Elegoo Saturn. The device is an excellent support for SLA, LCD, DLP printers and laboratory applications. The Plus version offers a larger washing size, making it possible to wash large models. The UV light strip, on the other hand, has the ability to bend the upper L-shaped part, which allows objects to be cured from above.

The device has two cleaning methods:

• Cleaning in the basket. Take out the model and place it in the basket for direct cleaning.
• Cleaning without removing the print from the platform, hang the print platform directly on the cleaning basket or cleaning stand.

Benefits:

• The cover blocks 99.95% of UV rays with a wavelength of 405 nm so you can work with open resin while the device is working.
• The closed container is tight so you do not smell isopropanol or other volatile cleaning liquids.
• This effectively prevents splashing and the leakage of liquids, which ensures safety.
• In curing mode, lenses have been added to the UV lamp which diffuses the light more evenly.
• A fighter was also added for the 360 'platform, thanks to which the blind angle without light under the model was eliminated.
• The device is equipped with a knob on which you can set the time from 1-60 minutes.

Parameters:

• UV lamps power: 25 W
• UV light wavelength: 405 nm
• Time selection range: 1 - 60 min
• Basket washing size: 192mm (L) * 120mm (W) * 290mm (H)
• Hanging cleaning size: 192mm (L) * 120mm (W) * 235mm (H)
• Curing Size: 190mm (D) * 245mm (H)
• Machine Size: 290mm (L) * 270mm (W) * 479mm (H)
• Weight: 6.5 kg

Package:

• 1 piece

Professional UV resin intended for LCD, DLP and SLA printers. Low shrinkage and dimensional stability during printing guarantee that the final model will be characterized by high precision and clear details. Anycubic UV resins have a good combination of hardness and ductility, which ensures easy removal of supports and high mechanical strength. Anycubic DLP Craftsman is a new resin created for DLP printers. Even though the resin was developed for DLP technology, this does not mean that it cannot be used for standard SLA and MSLA printers, as the resin is still cured at a light wavelength of 365 - 405 nm. The resin has very low shrinkage and incredible precision, thanks to special ingredients such as microcrystalline ceramic powder. Additionally, Anycubic DLP Craftsman is perfect for quick printing.

Colors:

• White
• Gray
• Beige

Technical data:

• Tensile strength: 35-50 MPa
• Elongation: 8-12%
• Bending strength: 50-70 MPa
• Bending modulus: 1200-1600 MPa
• Shrinkage: 3.72-4.24%
• Hardness: 82 HD
• Viscosity: 150-250 mPa*s
• Density: 1.15-1.20 g/cm3

Packaging:

• 1 kg

Anycubic platform Compatible model: Photon Mono X, Mono X 6K, M3 Plus

Additional work platform for printing. Thanks to it, you can print faster. Fixing the axis of the platform with the screw from above. The platform is made of metal, which guarantees high durability and stability during printing.

Parameters:

• Size: 290 x 210 x 135 mm
• Silver color
• Weight: 900 g

Package:

• 1 piece

Resin tray for Photon Mono X / X6K / M3Plus printer

Packaging:

• 1 piece.

FEP film (foil) for the Photon Mono X printer. Spare size of FEP foil sheet for Anycubic Photon Mono X and Photon Mono X 6K.

Foil dimensions:

• 260mm x 175mm

Foil thickness:

• 0.15mm

Advantages:

• Resistant to high temperatures (204 °C).
• Chemically resistant.
• Resistant to UV radiation.

Attention:

• The FEP foil is a consumable part and must be replaced if it is deformed or damaged during printing.
• The foil should be replaced immediately if any signs of deformation or excessive adhesion occur.

Packaging:

• 5 pcs.

Flexible Formlabs Build Platform 2.

• The new work platform has a flexible surface and comfortable handles. In one simple movement, printed parts are instantly removed from this coating without the use of tools. The platform eliminates the risk of part damage and optimizes workflow.

Packaging:

• 1 piece

Denture Base and Teeth resins have been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins have received the biocompatibility class confirmed by the standards: EN-ISO 10993-1: 2009 / AC: 2010:

• Non-mutagenic. • Non-cytotoxic. • Does not cause erythematous or edema reactions. • Not sensitizing. • Does not cause systemic toxicity.

ISO standards for Denture Teeth:

• EN-ISO 22112: 2017 (Dentistry - artificial teeth for dentures) • Flexural strength, water absorption and water solubility in accordance with EN-ISO 10477 (Dentistry - Polymer-based crowns and veneering materials) type 2 class 2

Color:

• A1
• A2
• A3
• A3.5
• B1
• B2

Package:

• 1l

Permanent Crown resin is a dental, biocompatible material for 3D printing in SLA technology. The material in the natural color of tooth enamel is suitable for the production of permanent, full-contour prosthetic restorations. Permanent Crown resin is a hybrid material with a ceramic filling. The prints have a perfect fit, low water absorption and a smooth finish. Crowns made of this material have a low tendency to age, discolor or build up plaque. Permanent Crown resin is available in 4 VITA shades (A2, A3, B1, C2).

Application:

• Permanent single crowns.
• Cartridges.
• Inputs.
• Veneers.

Resin is a medical device as defined in the EU Medical Devices Directive (93/42/EEC) and Chapter 201(h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with temporary CB resin have been assessed according to ISO 10993-1:2018 (Part 1: Assessment and testing as part of the risk management process) and ISO 7405:2009/(R)2015 (Dentistry - biocompatibility assessment).

• Printing on a stainless steel build plate

Packaging:

• 1 liter

Resin for making models for crowns, models for bridges, models for aligners, prosthetic models, diagnostic models and implant models.

Benefits:

• the models are extremely hard after the printing and final exposure process
• available in Sand - "sand", Gray - "gray" and Night - "night"
• the resin has a low viscosity.
• faster printing process, easy cleaning and less material consumption
• precise printed and perfect reproduction of the smallest details
• The NYTE3D model has been specially developed for dental laboratories and can be used in devices with a wavelength of 385 nm and 405 nm. You are free to decide whether you will use the material in your LCD printer or DLP printer.

Technical data:

• 3.5% bending stress 65.7 ± 3.4 MPa
• Bending strength 71.2 ± 4.2 MPa
• Bending deformation 4.93 ± 0.13%
• Modulus of elasticity 2484 ± 145 MPa
• Shore D hardness 90 ± 1
• Viscosity 220 mPa · s
• Wavelength range 385-405nm

Package:

• 1 kg

Advantages:

• It burns out with almost no residue. This makes it perfect for all kinds of foundry indications.
• It can be used for works made of lithium disilicate.
• Very low expansion
• High model accuracy
• Short exposure times and high reactivity ensure precise printing and perfect reproduction of the smallest details

Technical data:

• 3.5% flexural stress 63.7 ± 2.9 MPa
• Modulus of elasticity 2498 ± 115 MPa
• Wavelength range 385-405nm
• Flexural strength 72.2 ± 3.2 MPa
• Shore D hardness 90 ± 1
• Flexural strain 5.03 ± 0.23 %
• Viscosity 220 mPa·s

Packaging:

• 1 kg

** Benefits:**

• the color of the resin faithfully reflects the color of the gums for a model that is perfectly suited to the job
• does not stick to the hand or model
• high tear strength
• the resin is soft and flexible, perfect for making implant models.
• it can be used in devices with a wavelength of 385 nm and 405 nm.

Package:

• 500g

The new versatile IP Lighting Pro light curing lamp with modern LED technology.

The latest generation of light curing with advanced LED technology for optimal curing.

• Veneering composites.
• 3D printing materials.
• Individual spoon materials.

Advantages:

• Very broad wave spectrum 380 - 650 nm.
• Efficiency and exposure depth.
• Reduces curing time by up to 50% compared to conventional halogen curing lamps.
• LED chips guarantee a much longer life compared to halogen, xenon or fluorescent lamps.
• Stainless steel mirror chamber with 160mm diameter transparent turntable and intelligent cooling system.
• Large polymerization chamber.
• Adjustable curing time in minutes and seconds, making it universally adjustable.

Curing time:

• Spoon materials (40-90s).
• Composites (2-3 mins).
• 3D printing materials (3-5 minutes).

Technical data:

• Emission spectrum 380-650 nm.
• LEDs 48x LEDs.
• 115W power
• Voltage 230/110V; 50Hz.
• Dimensions L x W x H 200 x 400 x 340 mm
• Weight 10 kg.

Packaging:

• 1 piece

01S is a beige dental model resin containing unique inorganic fillers to increase performance. Printed dental models have a matte surface with a plaster texture, which ensures precise scanning results. In addition, the resin material features accurate size, scratch-resistant surface, extremely low shrinkage rate and long-term stability, making it ideal for printing high-quality dental models. With the D01S you can create tooth models with confidence and precision.

Advantages:

• Very low shrinkage.
• High dimensional accuracy.
• Hard and wear-resistant surface.
• Matte surface and plaster texture.

Application:

• Working models.
• Implant models.
• Diagnostic models.

Compatible with 3D printers for UV resin 385-410nm DLP:

• All series of Anycubic, Asiga, Solus, Miicraft, Kudo3d, Flashforge, Makex, Shining etc.

Mechanical properties:

• ASTM Shore Hardness: D2240-05 92D.
• Tensile strength ASTM: D638-14 20MPa.
• Bending strength ASTM: D790-10 39MPa.
• Elongation at break ASTM: D638-14 5%.
• Viscosity (25℃) ASTM: D4212-10 1100mpa.s.

Packaging:

• 1 kg