Categories
CERAMO Wax for Foundation and Cervical Orange 45g
Undercoating and cervical wax from the new CERAMO line, ideal for pressed ceramics. Orange color.
Advantages:
- low shrinkage
- flexible
- shape stability
- bio organically colored.
Package:
45 g
...CERAMO wax for modeling pressed ceramics ICE BLUE 45g
Modeling wax for crowns and bridges, ideal for pressed porcelain. Light blue color.
Advantages :
- solidification point 64 degrees ° C.
- colored organically
- very clearly visible details of the modeling room.
Package:
45 g
...Cervical wax 70g
Cervical wax, eggplant color.
Characteristics:
- Flexible, stress-free, soft and non-shrinking special wax for modeling the cervical edges of crowns, precision parts and inlays.
- Cervical wax burns without leaving any residue, making it also suitable for the ceramic pressing technique.
- It has a very low elastic limit, so any deformation has only a plastic effect. This allows for safe modeling of thin plates up to the preparation border.
- Freezing point approx. 62°C.
Packaging:
- 70g
Chamois brush 60x5.5mm
Chamois chamois polishing brush.
- Soft with a diameter of 60x5.5mm.
Packaging:
- 1 piece.
Chamois brush 80x5.5mm
Chamois leather brush for polisher.
The material from which the brush is made dries out after some time and must be moistened to regain its properties.
Brush diameter 80 x 5.5 mm.
Packaging:
- 1 piece.
Chamois brush 85x10mm
A chamois brush for polishing on a polisher.
- Soft, diameter 85x10mm.
- Composed of 14 layers of chamois leather.
Packaging:
- 1 piece.
Chema Hard Modeling Wax 500g
Modeling wax for making models of denture base plates.
Characteristics:
- hard wax.
- Dark pink color.
- Based on natural beeswax
Packaging:
- 500g (24 plates)
Chirmed Scalpel
Scalpel with a handle made of stainless steel.
Sizes:
CO 100 Belly scalpel, total length 140 mm, blade length 20 mm
CO 101 Belly scalpel, total length 150 mm, blade length 30 mm
CO 102 Belly scalpel, total length 160 mm, blade length 40 mm
CO 105 Pointed scalpel, total length 150 mm, blade length 30 mm
CO 106 Pointed scalpel, total length 160 mm, blade length 40 mm
CO 111 Sharp-pointed knife, micro, total length 120 mm, blade length 20 mm
CO 112 Sharp-pointed knife, total length 125 mm, blade length 25 mm
Packaging:
- 1 piece.
Circotrim eraser for processing zirconia before sintering
Highly efficient CIRCOTRIM eraser for processing zirconia before the sintering process.
Characteristics:
- Due to its high abrasion and low temperature emission, the darker area is perfect for reducing connectors from zirconium crowns.
- The lighter area with less abrasion is used to precisely smooth the area after the removed connector.
- Maximum optimal use speed: 15000 rpm
Packaging:
- 1 piece
Colado CC 250 g
Colado CC is a nickel-free alloy intended for metal frameworks, ceramic or composite veneers.
Indications:
- Crowns.
- Telescopic crowns.
- Crown-root inlays.
- Bridges.
- Extensive restorations and long bridges.
- Restorations mounted on implants.
- Extensive substructures on implants.
Chemical composition:
- every 59.0%
- Cr 25.5%
- Mo 5.5%
- In 5.0%
- Ga 3.2%
- Nb,Fe,B less than 1%
Packaging:
- 250g
Colado CC 25g
Colado CC is a nickel-free alloy intended for metal frameworks, for veneering with ceramic or composite materials.
Indications:
- crowns
- telescopic crowns
- crown-root inlays
- bridges
- extensive restorations and long bridges
- restorations placed on implants
- extensive frameworks on implants.
Chemical composition:
- Every 59.0%
- Cr 25.5%
- Mo 5.5%
- In 5.0%
- Ga 3.2%
- Nb, Fe, B less than 1%
Package:
- 25g
Colorful glasses for medicines
Colorful glasses for medicines and other preparations, also for mixing small amounts of acrylic, e.g. for repairs.
Packaging:
- 1 piece.
Colorful silicone bowl
Silicone bowl for alginate mass. Large selection of colors.
Package:
1 piece.
...Colorless protective wax to relieve discomfort while wearing orthodontic appliances
Protective wax for fixed appliances.
- It was created especially for people who wear braces.
- Wax protects the oral mucosa from irritation and abrasions, which often occur at the beginning of orthodontic treatment.
Characteristics:
- Colorless.
Packaging:
- 1 pack/ 5 sticks
Composite modeling instruments - set
A set of instruments for composite modeling.
Special steel used at the ends of the instrument eliminates the problem of the composite sticking.
Packaging:
- 3 pcs
Compressed air blower Christmas tree connector
Compressed air blower. Diameter 6mm, 8mm, 10mm. To be connected to a Christmas tree connector.
Package:
- 1 piece
Compressed air blower with quick coupler
Compressed air blower. Diameter 6mm, 8mm, 10mm. To be connected to a quick coupler.
Package:
- 1 piece
Concave-convex orthodontic forceps KO-060-140-HPMK
Schwarz forceps. Concave - convex. Made of the highest quality stainless steel.
- Length 140mm.
- For wire max.0.7mm.
- The diameter of the working part is 1.2 mm.
Packaging:
- 1 piece.
Concave-convex prosthetic forceps KP-069-125-PMK
Concave-convex prosthetic forceps.
- Pliers length 125 mm.
- For wire thickness max. 0.8mm
- The diameter of the working tip is 1.2 mm
Packaging:
- 1 piece
Copy pencil
Copy pencil.
The core of the pencils is made of erasable clay (not subject to firing), soaked in a water-soluble dye. The copy pencil leaves traces that are resistant to erasure.
- Pencils are available in two types with red or blue graphite.
Packaging:
- 1 piece.
Corundum discs 38x1.0mm
Corundum discs for cutting casting channels.
- Diameter 38 mm
- Thickness 1.0mm
Package:
- 1 piece
Cotton brush 80x5.5mm
Multi-ply cotton brush for polishing machine, for high-gloss polishing.
- Diameter 80x5.5mm.
- Metal center.
Packaging:
- 1 piece.
Cotton rag 29B/125 1 piece
Polishing brush-cloth 125x10mm.
High gloss polishing discs, thin (white) cotton cloth on a conical plastic center.
Characteristics:
- Diameter 125x10mm.
- Soft.
- Hub made of plastic.
Packaging:
- 1 piece.
CR-CO 37x1.0 separators
Carborundum separators for the handpiece for cutting off casting channels.
Characteristics:
- Diameter 37mm x 1mm.
Packaging:
- 1 piece.
Crimped wax 0.35mm mitel
Textured casting wax (morka), green, medium veined, thickness 0.35mm, 15x7.5cm.
Characteristics:
- Proven wax for modeling maxillary denture plates.
- The wax texture gives the denture plate a more anatomical surface.
- It adapts well and adheres to the model.
Packaging :
- 15 pcs/pack
Crimped wax grave 0.4 mm
Textured casting wax (morka).
- Green color.
- Clearly veined.
- Thickness 0.4mm.
- Size 15x7.5cm.
Characteristics:
- Proven wax for modeling maxillary denture plates.
- The wax texture gives the denture plate a more anatomical surface.
- It adapts well and adheres precisely to the model.
Packaging :
- 15 pcs/pack
Crimped wax mittel 0.5 mm
Textured casting wax (mocha) green BEGO . 15x7.5cm.
Characteristics:
- Thickness 0.5mm
- Medium veined
- Proven modeling wax for modeling maxillary skeletal denture plates.
- The wax texture gives the denture plate a more anatomical surface.
- It adapts well and adheres exactly to the model.
Packaging:
15pcs/pack
...Crystal Aqua XL Porcelain palette
Crystal Aqua XL porcelain palette.
Renfert catalog number 10431000
Function & Operation:
- Glass, partially self-moistening porcelain mixing plate, with two high-tech foam moisturizing strips.
Advantages:
- Abrasion-resistant glass tile, extremely gentle to the brush.
- Durable, shape-stable moisturizing strips ensure uniform moisture and consistency of porcelain.
- Thanks to the appropriate humidity of porcelain, micro bubbles and porosity do not form in it.
Plate dimensions:
- 220 x 4 x 120 mm
Housing dimensions:
- 291 x 36 x 223 mm
Packaging:
- 1 piece
CT wax templates and braces
CT Wax Templates and Bonyhard Clasps.
Characteristics:
- These pre-shaped clamp profiles simplify modeling and save time.
- The shape of the profiles allows for their wide use thanks to the possibility of individual modification.
Packaging :
- 200pcs/pack
Cyclope - induction heater for knives and modelers
Induction heater for knives and modelers.
Advantages:
- Minimizes the risk of burns.
- Saves time.
- Improves the quality of work.
Packaging:
- 1 piece
DD phoeniX sintering oven cleaning powder 200g
DDphoeniX is a powder to help clean soiled sintering ovens. Regular use minimizes the problem of discoloration, thus extending the life of the heaters.
- Sintering - cleaning program - as recommended by the furnace manufacturer.
- Thorough cleaning (in case of problems with the color of works) 30--50 gr X 2 cleaning cycles.
- Regular cleaning (every 2 weeks) approx. 30gr x 1 cleaning cycle.
Precautions:
- When using the powder, use protective gloves and a mask to protect the eyes and mouth.
- Do not eat or drink while using the powder.
- Avoid breathing dust.
- Apply to the sinter tray at a distance and at moderate speed to avoid increased dusting.
Storage:
- Keep tightly closed in the original packaging.
- Store in a cool, dry place.
Packaging:
- 1pc/200g
Decals 1 pc
decal
Characteristics:
- For orthodontic appliances.
- Nature or comics motifs to be placed in acrylic material.
- Thanks to this, each camera can have an individual character.
Packaging:
- 1 piece.
Delicate rag diameter 100mm TOP DENT
Brush made of linen.
Characteristics:
- Soft.
- Diameter 100mm.
- max. revolutions 3.600/min
Packaging:
- 1 piece.
Dental LT ClearV2 1L resin for Formlabs 3D printer
Class IIa biocompatible resin with high peel and wear resistance, making Dental LT Clear ideal for splints, attachments and other direct orthodontic devices. Thanks to the transparent color, high optical transparency is achieved for beautiful final products.
- The material has been assessed according to ISO 10993-1:2018.
Application:
- Occlusal splints.
- Retention appliances.
- Occlusal overlays.
- Surgical splints and guides.
- Fastening elements.
- Other orthodontic accessories.
Material properties:
- Bending modulus 2300 MPa.
- Elongation at break 12%.
- Shore hardness: 78D.
- Color transparent.
Packaging:
- 1 liter
Dental Model V3 1L resin for Formlabs 3D printer
Designed for crown and bridge models with replaceable dies. Dental Model Resin is a very precise resin with high accuracy.
Version 3:
- This version of Model Resin is a reformulation of the previous version.
- With the new V3 resin, you can print even more accurate models in half the time.
- Supports print resolutions: 100 and 50 microns.
- Requires Form 3 Resin Tank V2.1 or later for Form 3B and Form 2 Resin Tank LT for Form 2.
Packaging:
- 1l
Dentex front teeth 6 pcs
DENTEX teeth are made of three acrylic resins in 14 colors and dozens of shapes.
Characteristics:
- Structure corresponding to natural teeth.
- Three layers of acrylic resins.
- Colors matching natural teeth.
- Anatomical shapes.
- Long-lasting colors.
- Fluorescent effect.
Application:
- Complete dentures.
- Partial dentures.
- Skeletal prostheses.
Packaging:
- Flap 6 pcs.
Dentex side teeth 8 pcs
DENTEX teeth are made of three layers of acrylic resins in 14 colors and dozens of shapes.
Characteristics:
- Structure corresponding to natural teeth.
- Three layers of acrylic resins.
- Colors matching natural teeth.
- Anatomical shapes.
- Long-lasting colors.
- Fluorescent effect.
Application:
- Complete dentures.
- Partial dentures.
- Skeletal prostheses.
Packaging:
- Flap 8 pcs.
Dentin occlusal wax 70g
Dental occlusal wax, ideal for rational, aesthetic modeling of chewing surfaces.
Characteristics:
- It can be applied very well.
- Clear contours.
- Occlusive waxes do not discolor or stick.
- They burn without residue.
Packaging:
- 70g.
Detax resin Freeprint cast 2.0 500g or 1000g
Light-cured 3D resin for producing precise casting objects (skeletons).
Advantages:
- For all UV printers with a light spectrum of 385 nm.
- Excellent dimensional stability after printing ensures safe application with fit control, especially for cast models and molds.
- Printing results are precise and distortion-free, even for extremely delicate and complex models.
- Any corrections or repairs after printing are possible using easyform gel LC.
- Low viscosity and optimized cure depth help reduce printing time and material consumption and facilitate faster cleaning.
- It burns without leaving any residue in the mold and is the basis for high-quality modeling results that ensure a perfect fit.
- Red colour
Packaging:
- 500g or 1000g
Detax resin Freeprint model 2.0 1000g
Light-curing resin for 3D printing for dental models.
Advantages:
- For DLP printers with a wavelength of 385 nm.
- Maximum surface hardness and dimensional stability ensure excellent mechanical load capacity.
- Faster workflow without drying process.
- Maximum design precision, feel and stability meet the high demands of model production.
- Optimum edge strength ensures reliable models.
- Colors: sand, light grey, caramel, white.
Physical data:
- Flexural strength > 80 MPa;
- Elastic modulus > 1700 MPa;
- Final hardness > 80 Shore D.
Packaging:
- 1000g
Detax resin Freeprint splint 2.0 500g
Light-curing, biocompatible resin for 3D printing, for the production of implant guides, transfer keys and occlusal splints.
Advantages:
- Light spectrum 385 nm.
- Transparent formula for visual control in the workspace.
- Process reliability due to high initial hardness and final strength.
- Low viscosity ensures low material consumption and faster cleaning.
- The highest mechanical resistance to bending and cracking.
- Odor and taste neutral.
- Class IIa medical device,
- Colour: transparent.
Packaging:
- 500g
Detax Silicone Blue eco 86 Shore A 5kg+5kg
Laboratory silicone, addition 1:1.
For versatile use (secure fixation of false teeth, prefabs, bites, models, tinned tooth insulation, etc.). High economy, optimal mixing control thanks to contrasting colours.
Advantages:
- Colour: Blue base, Catalyst beige 1:1
- Addition hardening.
- Very high, easy to knead consistency.
- Precise reproduction of details.
- Stable shape and volume.
- Smooth surface.
- Heat resistant up to 200°C.
- Standard final hardness 86 Shore A.
Packaging:
- Base 5kg
- Catalyst 5kg
DFS Haftspray 75ml spray
Glue for gluing wax elements to the model.
How to use:
Possibility to correct glued elements.
Shake well before use.
Spray distance: 10-15 cm.
Packaging:
- 75 ml
DFS honeycomb base, round, 1 pc. + pins
Round honeycomb porcelain firing base with pins.
Advantages:
- Extremely low temperature absorption.
- Hassle-free heating and cooling phase.
Packaging:
- 1 pc. socket + 5 pins
DFS Milling cutter with diamond coating for denture rims 60016
Milling cutter with diamond coating for edging acrylic denture plates and individual trays.
Packaging:
- 1 piece.