Categories
Basic quattro sandblaster tank with a 70-250µm nozzle
Additional tank for the Basic quattro sandblaster with a 70-250 micron nozzle
Renfert catalog number 29580250
Packaging:
- 1 piece
Basic sandblaster nozzle 50-110 µm
Sandblasting nozzle for Basic sandblasters Ø 0.80 mm. Recommended for sand from 50-110 microns, especially recommended for sand 90 microns.
Renfert catalog number 900021204
Advantages:
- Thanks to the use of very durable boron carbide, durability has been increased four times compared to traditional nozzles.
- The extended shape of the nozzle ensures very good guidance and concentration of the sand beam.
- Possibility of adapting the nozzle to each application.
Packaging:
- 1 piece
Basic sandblaster nozzle 50-250 µm
Sandblasting nozzle for Basic sandblasters
Renfert catalog number 900033214
- Ø 1.20mm.
- Recommended for sand from 50-250 microns, especially recommended for sand 125 microns.
Advantages:
- Thanks to the use of very durable boron carbide, durability has been increased four times compared to traditional nozzles.
- The extended shape of the nozzle ensures very good guidance and concentration of the sand beam.
- Possibility of adapting the nozzle to each application.
Packaging:
- 1 piece.
Basic sandblaster nozzle 90-125 µm
Sandblasting nozzle for Basic sandblasters Ø 1.00mm. Recommended for sand from 90-125 microns, especially recommended for sand 110 microns.
Renfert catalog number 900033211
Advantages:
- Thanks to the use of very durable boron carbide, durability has been increased four times compared to traditional nozzles.
- The extended shape of the nozzle ensures very good guidance and concentration of the sand beam.
- Possibility of adapting the nozzle to each application.
Packaging:
- 1 piece
Bausch Arti-Fol 12µ BK31
Arti-Fol Metallic 12µ is a new High Tech inspection film with significantly improved properties. This new control film is a metallised polyester film (Shimstock film) with a thin thickness of 12u. The new film is characterized by very good dye transfer. Thanks to the metallised reverse side of the foil, the side with the dye layer is easy to distinguish. Arti-Fol Metallic, due to its high tensile strength and low material thickness, is ideal for controlling proximal contact points when placing bridges or crowns.
Characteristics:
- On porcelain and polished metal surfaces, the contact points are clear.
- Metallization largely eliminates the problem of static electricity.
- Easy application without tweezers.
- Very tear resistant.
- Width 22mm.
- Length 20m.
- Red, one-sided.
Packaging:
- 1 piece.
BEGO silicone duplication box
Can for duplicating models in silicone (small).
- Precise reproduction.
- Material savings.
- Dimensional stability.
- Three interchangeable palatal molds that fundamentally support reproduction accuracy and enable extremely economical use of silicone due to flexible positioning.
Packaging:
- 1 piece.
BegoForm weight 15x90g
BegoForm refractory post material for inlays, veneers and onlays. High edge strength posts, smooth and precise. Special ceramic masses of known manufacturers can be used for them.
Package:
- Set of 15 x 90g bags.
BegoSol 1000ml - The liquid is sensitive to low temperature - shipping in winter at the customer's risk.
Begosol is a liquid intended for mixing BEGO, Wirovest, Wirovest Plus, Wirofine, Belavest T investment materials.
Packaging:
- 1000ml.
Note: The liquid is sensitive to frost - shipping at the customer's risk.
...BegoSol HE 1l - The fluid is sensitive to low temperatures - shipping in winter at the risk of the customer.
BegoSol HE mixing fluid for the investment materials Bellavest SH and Belavest T.
Attention:
- The liquid is sensitive to frost - shipping in winter at the risk of the customer.
Package:
- 1l.
BegoSol K 1l- The fluid is sensitive to low temperatures - shipping in winter at the risk of the customer.
Liquid for mixing investment materials, WiroFine, BellaStar XL and BellaCer.
Package:
- 1 l.
Attention:
- The liquid is sensitive to frost - shipping in winter is at the customer's risk.
Bellavest DR 160g
BEGO Bellavest DR - new, precise shock-heat investment with reduced dusting for crowns and bridges.
Investment material with reduced dusting for fast and conventional heating in the fabrication of crowns and bridges:
- reduced by about 80% dust formation during work has a positive effect on the improvement of health protection,
- shock-heating up to 900 ° C or conventional heating means flexibility in a modern dental laboratory,
- very good flow parameters and extended working time up to 5 minutes improve the comfort of work for the user,
- creamy consistency leads to very smooth surfaces of cast objects with perfect reproduction of the smallest details,
- constant, high quality and optimal expansion control lead to high precision and accuracy in all indications,
- after setting, it offers high edge strength and leads to the correct casting of the smallest details,
- good technical parameters of the mass emp ...
Bellavest SH 160g
Belavest SH quick or traditionally heated investment for precision casting of crowns and bridges. Also for pressed ceramics, precious and non-precious metals.
Characteristics:
- Very smooth casting surfaces.
- Does not contain graphite, bound with phosphorus.
- Cures with significant edge strength and releases easily.
Packaging:
- 160g
Bellavest T investment material 160g 1pc
Graphite-free investment material for precision casting of crowns and bridges for precious and non-precious metals.
Characteristics:
- High edge strength and easy release.
- Mixing time at 20 °C - approx. 5 min.
- Mixing time at 27 °C - approx. 3 min.
- Total ring expansion with 100% BegoSol solution - 3%.
- Recommended fluid: BegoSol He and BegoSol.
Packaging:
- 160g.
BERTONI A 3-way screw
Multi-sector stainless steel screw by Bertoni.
Characteristics:
- With three independently operating sections.
- For Y-plates
- Reinforced guides.
- 4mm travel in each segment.
Packaging:
- 1 piece
BERTONI B 2-way screw
Stainless steel multi-sector screw, after Bertoni.
Characteristics:
- Transverse prosthetic screw for Y-cut plates.
- Reinforced guides.
- 4mm travel in each segment.
Packaging:
- 1 piece.
Bi-Flex separator for porcelain with diamond grit
Bi-Flex - separator for porcelain with diamond grit
Renfert catalog number 271000
Advantages:
- A very flexible porcelain separator covered with diamond grit on both sides.
- A fine diamond coating that allows you to gently shape and separate ceramics.
Technical data:
- Diameter 22mm.
- Thickness 0.15mm.
- Max. number of revolutions 15,000/1 min.
Packaging:
- 1 piece
Bi-Pin 17.5 mm with needle 100 pcs.
Pin with two guide pins and a needle for positioning in impressions.
Renfert catalog number 3431000
Advantages:
- It does not require drilling the model.
- The long embedding pin helps to ensure accurate positioning of the pin in the impression.
- The conical shape of the pins allows for easy removal.
Technical data:
- Pin length - 17.5mm.
- Head length - 4.0mm.
- Head diameter - 1.9mm.
- Needle length - 8.0mm.
- Max pin width - 2.9mm.
Packaging:
- Pins 100 pcs.
- T-shirts 100 pcs.
Bi-Pin Drill for micromotor 2.0mm x 2.35mm
Bi-Pin and Bi-V-Pin drill for micromotor.
Renfert catalog number 3470000
Description:
- Suitable drilling depth of 6.5 mm thanks to the use of a stop on the drill.
- Drill shank diameter 2.35 mm (for the micromotor).
Packaging:
- 1 piece.
Bi-Pin Pin drill bit 1 piece
Stepped drill for Bi-Pin and Bi-V-Pin pin pinning machine
Bi-Pin small pin drill bit 1.98 mm x 3.0 mm
Bi-Pin medium pin drill bit 2.0 mm x 3.0 mm
Bi-Pin large pin drill bit 2.02 mm x 3.0 mm
Renfert catalog number 50100198 - 1.98mm
Renfert catalog number 50100200 - 2.0mm
Renfert catalog number 50100202 - 2.02mm
Advantages:
- Very high service life, special blade geometry ensures very low drilling resistance and maximum rotational symmetry
- Suitable for use with all pins with a head diameter of 2.0 mm, especially recommended for Bi-pin and Bi-V-pin.
- Drill shank diameter 3.0 mm (for pinning machine)
- Drilling depth 5.8 mm
Packaging:
- 1 piece.
Bi-Pin rubber caps 500 pcs
Rubber caps that can be attached to all Renfert Bi-Pin pins.
Renfert catalog number 3220000
Advantages:
- They prevent damage to pins during basic model grinding.
- They ensure high precision of the model.
- Time saving, easy and safe operation.
Packaging:
- 500 pcs
Bi-Pins without needle long 17.5 mm 1000 pcs
Nickel-plated pin with double guidance for secure and rotation-free mounting of the post. Precise fit with slight friction between pin and bushing. It does not oxidize even after a long time.
Renfert catalog number 3462000
Technical data:
- Pin length - 17.5mm.
- Head length - 5.5mm.
- Head diameter - 2.0mm.
- Max. T-shirt width - 3.6mm.
Packaging:
- 1000 pcs of pins + 1000 pcs of shirts.
Bi-Pins without needle long 17.5mm 100 pcs
Nickel-plated pin with double guidance for secure and rotation-free mounting of the post.
Renfert catalog number 3461000
Advantages:
- Precise fit with slight friction between pin and bushing.
- It does not oxidize even after a long time.
Technical data:
- Pin length - 17.5mm.
- Head length - 5.5mm.
- Head diameter - 2.0mm.
- Max. T-shirt width - 3.6mm.
Packaging:
- 100 pcs of pins + 100 pcs of shirts
Bi-Pins without needle short 13.5mm 100 pcs
BI-Pins 13.5mm. Nickel-plated pin with double guidance for secure and rotation-free mounting of the post.
Renfert catalog number 3261000
Advantages:
- Precise fit with slight friction between pin and bushing.
- It does not oxidize even after a long time.
Technical data:
- Pin length - 13.5mm.
- Head length - 5.5mm.
- Head diameter - 2.0mm.
- Max. T-shirt width - 3.6mm.
Packaging:
- 100 pcs pin + 100 pcs t-shirt
Bi-V-Pin with metal sleeve 100 pcs
Bi-V-Pin with metal sleeve. Thanks to the V profile, it is possible to use these pins even in the case of teeth standing closely next to each other. Using Bi-V-Pin, you can make very flat and neat primary bases. There is then plenty of space left for making a secondary base and attaching it to the articulator.
Renfert catalog number 3281000
Technical data:
- Pin length - 12.5mm.
- Head length - 5.5mm.
- Head diameter - 2.0mm.
- Max. T-shirt width - 3.6mm.
Packaging:
- Pins 100 pcs.
- T-shirts 100 pcs.
Bi-V-Pin with plastic sleeve 100 pcs
Bi-V-Pin with plastic sleeve. Thanks to the V profile, it is possible to use these pins even in the case of teeth standing closely next to each other. Using Bi-V-Pin, you can make very flat and neat primary bases. There is then plenty of space left for making a secondary base and attaching it to the articulator.
Renfert catalog number 3291000
Technical data:
- Pin length - 12.5mm.
- Head length - 5.5mm.
- Head diameter - 2.0mm.
- Max. T-shirt width - 3.8mm.
Packaging:
- Pins 100 pcs.
- T-shirts 100 pcs.
Biosil F 1 piece
Biosil F is a flexible chrome-cobalt prosthetic alloy for casting frame dentures. Thanks to its exceptional elasticity, it is recommended for skeletal work with long arms of retention clasps.
Characteristics:
- Composition: Co - 64.8%, Cr - 28.5%, Mo - 5.3%, Si - 0.5%, Mn - 0.5%, C - 0.4%.
- Melting point: 1320- 1380°C.
- Pouring temperature: 1500 °C.
- Mold heating temperature: 1000 °C.
- Vickers hardness: 400 HV 10.
- Tensile strength: 900 N/mm².
- Destruction limit: 5%.
- Density: 8.4 g/cm³
- Yield strength: 700 N/mm².
- Modulus of elasticity: 220 GPa.
Packaging:
- 1 piece.
Black color palette
Pallet for porcelain and composites.
Characteristics:
- The tile is specially designed for light-curing or porcelain paints.
- The lightfast cover and the black surface prevent premature polymerization.
Package:
- 1 piece
Black cylinder eraser BEGO 1 piece or 100 pieces
Black roller erasers for polishing chrome-cobalt alloys and any other alloys that do not contain precious metals.
Characteristics:
- Black colour.
- Diameter 6.5x24mm (cylinder).
- Max speed 10,000 rpm.
Packaging:
- 1 pc or 100 pcs.
Black eraser disc BEGO 1 piece or 100 pieces
Black eraser discs for polishing chrome-cobalt alloys and any other alloys that do not contain precious metals.
Characteristics:
- Black colour.
- Diameter 22x3.5mm (disc).
- max speed 10,000 rpm.
Packaging:
- 1 pc or 100 pcs
Black LED shadowless desk lamp. Promotion
Elegant and economical LED lighting (84 diodes in two rows) with the possibility of adjusting the angle of inclination and the distance of the luminaire from the surface to which it is attached. The lamp has a 4-step adjustment of light intensity. The state-of-the-art LEDs used in it, in addition to energy savings, ensure that there is no flickering effect as in traditional lamps equipped with fluorescent lamps.
Smooth regulation consists in a smooth change of the power consumed by the diodes in the range of 2.5W-20W.
Equipped with a convenient pantograph arm, a prosthetic lamp with an additional joint that facilitates optimal positioning of the fluorescent lamp in relation to the workplace.
Installation method to choose from:
- Clamp with clamp (when mounted on the side of the table) - included with the lamp.
- The cone is fixed to the tabletop surface with screws. (optional to purchase additionally, mikran code: 11818)
- ...
Black lens eraser BEGO 1 piece
Erasers for polishing chrome-cobalt alloys and any other alloys that do not contain precious metals.
Characteristics:
- Black colour.
- Diameter 15.5mm.
- max speed 10,000 rpm.
Packaging:
- 1 piece
Block Out Resin - blocking resin
Ultradent LC Block-Out Resin is used to produce gel reservoirs in whitening trays and is useful in other laboratory work, such as model repairs. The application of Ultradent LC Block-Out Resin using the Black Mini Tip is quick and effective. Light curing is necessary. The resin is not intended for use in the oral cavity. To form gel reservoirs, apply approximately 0.5 mm of Ultradent LC Block-Out blocking resin on the labial surfaces, remaining approximately 1.5 mm from the gum line, and polymerize with light. Do not go beyond the incisal edges or occlusal surfaces.
Packaging:
- 1.2ml syringe.
Blocks for mixing and mixing impression materials
Blocks for making impression materials.
Dimensions:
- 9 x 16 cm
Packaging:
- 1 piece
Blue cylinder eraser, 1 piece
Flexible silicone polishing erasers.
Intended for processing:
- Porcelain.
- Precious alloys.
- Acrylic.
Characteristics:
- Color blue.
- High gloss polishing.
- Fine-grained.
- Speed: 5,000- 10,000 rpm.
- 6x24 sharpened roller.
- 7x20 straight cylinder.
Packaging:
- 1 piece
Blue eraser disc, 1 piece
Flexible silicone polishing erasers.
Intended for processing:
- Porcelain.
- Precious alloys.
- Acrylic.
Characteristics:
- Blue, fine-grained eraser.
- Mirror polishing.
- Speed - 7,000- 10,000 rpm.
- Size 22x3mm
Packaging:
- 1 piece.
Blue lens eraser, 1 piece
Flexible silicone polishing erasers.
Intended for processing:
- Porcelain.
- Precious alloys.
- Acrylic.
Characteristics:
- Color blue.
- High gloss polishing.
- Fine-grained.
- Speed: 7,000- 10,000 rpm.
- Size 22x4mm.
Packaging:
- 1 piece.
Blue lens eraser, 1 piece
Top quality hard polishing erasers. Designed for processing materials such as chrome, cobalt, noble and non-precious alloys. They are characterized by durability and are intended for work that requires the behavior of the rubber band, not its flexibility.
Characteristics:
- Blue, coarse-grained eraser.
- For pre-treatment.
- Speed: 5,000- 10,000 rpm.
- Diameter 22x4mm.
Packaging:
- 1 piece.
Blue modeling wax 45g Schuler Dental
SU-MODELING WAX - blue modeling wax
Advantages:
- Particularly suitable for designing occlusal surfaces and modeling the walls of crowns, as well as for constructing pontics for plastic and ceramic veneers.
- It is characterized by high surface density.
- The opaque and intense color of the wax allows easy recognition of contours during modeling.
- Melting point 64 °C.
Packaging:
- 45g.
Blue paste for polishing 500g
Dry polishing paste.
Characteristics:
- The wax-bound paste enables clean and largely dust-free work.
- It does not contain quartz harmful to health.
- Blue paste for initial and final polishing of cobalt chrome alloys.
Packaging:
- 1pc/500g
Bond-A-Braid lingual retainer 15.5 cm/10 pcs
Lingual wire for retainers.
- Length 15.5 cm.
- 8 strand braided wire.
- Soft, easy to adjust.
Packaging:
- 10 pcs
Boxes for transporting models and dentures Promotion
Boxes with sponge for transport and storage of plaster models and finished dentures
Package:
- 1 piece.
Boxes for whitening rails and retainers
Teeth whitening rail boxes and retainers. Different colors.
Package:
1 piece.
...Brinell L diamond paste 5ml
Brinell L diamond powder paste.
Renfert catalog number 5190001
Characteristics:
- For polishing ceramics to a high shine.
- Economical application using a measuring syringe.
Packaging:
- 1 set (paste, felt wheel, lamb and holder.)