Aurosil C LAB 85 1.3kg - NEW

Aurosil C Lab 85 is a condensation silicone characterized by optimal hardness and excellent mechanical parameters. This material is suitable for many laboratory procedures requiring short processing times and processes conducted at moderate temperatures.

Aurosil C Lab 85 silicone is recommended for protecting teeth during the setting of removable dentures. It can also be used for making gingival masks in the indirect technique, as well as for gingival masks used in the fabrication of self-curing acrylic dentures. The material is also suitable for other related laboratory applications, such as rapid working models for removable denture repairs. A gel catalyst is required for proper setting.

Advantages:

• optimal balance between material stiffness and flexibility;
• well-balanced ratio of working time to setting time;
• compatibility with other C silicone catalysts;
• does not stick to hands and measuring cup;
• material with a pleasant vanilla scent;
• ease of shaping in the initial phase of work and optimal hardness after polymerization;
• thixotropic properties.

Technical data:

• mixing proportions: base: catalyst 10g/0.3g;
• operating time: 90 s (23°C);
• setting time: 6 min (23°C);
• time of removing the material from the mold: 10 min;
• compression deformation: < 1%;
• tearing resistance: (N/mm) 6.0;
• material memory: 99%;
• dimensional stability (after 24 hours): 0.2%;
• Shore A hardness: 85 ±2;
• detail reproduction: (μm) 20;
• temperature resistance: 100°C

Color;

• base – light gray;

Packaging:

• base 1.3kg

Aurosil C LAB 85 5kg NEW

Aurosil C Lab 85 is a condensation silicone characterized by optimal hardness and excellent mechanical parameters. This material is suitable for many laboratory procedures requiring short processing times and processes conducted at moderate temperatures.

Aurosil C Lab 85 silicone is recommended for protecting teeth during the setting of removable dentures. It can also be used for making gingival masks in the indirect technique, as well as for gingival masks used in the fabrication of self-curing acrylic dentures. The material is also suitable for other related laboratory applications, such as rapid working models for removable denture repairs. A gel catalyst is required for proper setting.

Advantages:

• optimal balance between material stiffness and flexibility;
• well-balanced ratio of working time to setting time;
• compatibility with other C silicone catalysts;
• does not stick to hands and measuring cup;
• material with a pleasant vanilla scent;
• ease of shaping in the initial phase of work and optimal hardness after polymerization;
• thixotropic properties.

Technical data:

• mixing proportions: base: catalyst 10g/0.3g;
• operating time: 90 s (23°C);
• setting time: 6 min (23°C);
• time of removing the material from the mold: 10 min;
• compression deformation: < 1%;
• tearing resistance: (N/mm) 6.0;
• material memory: 99%;
• dimensional stability (after 24 hours): 0.2%;
• Shore A hardness: 85 ±2;
• detail reproduction: (μm) 20;
• temperature resistance: 100°C

Color;

• base – light gray;

Packaging:

• base 5kg

Aurosil C LAB Activator Paste 60ml NEW

Catalyst for Aurosil C LAB silicone.

Color:

• pink.

Packaging:

• 1 pc./60ml.

Basic prebonder pen-type prosthetic sandblaster 2 tanks 70-250 µm/50 µm prebonder NEW

Basic prebonder precision sandblaster for the dental office.

The first scientifically validated precision sandblaster designed for clinical surface preparation of prosthetic restorations prior to final cementation.

Renfert catalog number: 29691250

Characteristics:

• process standardization: the device standardizes the pre-treatment of materials such as zirconium oxide, metal alloys, hybrid materials and modern polymers;
• guaranteed permanent bond: reliably prevents errors resulting from insufficient or excessive sandblasting, eliminating the risk of adhesion failures (repairs falling off);
• proven technology: system based on the renowned Renfert Basic quattro IS technology, which guarantees reliability and precision;
• Modularity and ergonomics: flexible tank configuration options and an ergonomic handle make clinical surface preparation in the office simple, fast and repeatable.
• protection of the material structure: thanks to extremely precise sand dosing (safe even for delicate materials).

Technical details:

• precise working distance: the Prebonder control tip allows you to maintain a constant distance from the filling, which always guarantees the same impact force of the sand;
• uniform micro-retention: thanks to the special Prebonder jet nozzle, the sand jet has the shape of a perfect cone, which allows for a perfectly even surface structure;
• bonding reliability: the operating pressure range has been scientifically confirmed to ensure maximum adhesion (gluing) of the restoration to the abutment;
• full control over the process: a precise pressure gauge with a clearly marked working area facilitates quick and error-free setting of parameters;
• stable sand flow: the patented Renfert Venturi mixing chamber ensures that the sand flows smoothly and without interruptions;
• work without delays: the IS (Immediate Stop) system stops sandblasting immediately after releasing the button - without unnecessary "spraying" of sand residues;
• versatility: the modular structure of the tanks allows for quick adaptation of the device to various tasks in the dental office.

Technical Data:

• dimensions (width x height x depth) 2 tanks: 395 x 320 x 510 mm;
• working pressure – precise sandblasting for optimal bonding: 0.6 - 1 bar;
• working pressure – recommended setting: 0.8 bar;
• working pressure – conventional precision sandblasting: 1 - 6 bar;
• Application: precision sandblasting for adhesion purposes (50 µm) and conventional sandblasting (70–250 µm);
• permissible mains voltage: 220 - 240 V;
• permissible mains frequency: 50 - 60 Hz;
• weight with 2 tanks without sand: 11.5 kg;
• connection pressure: 6 - 8 bar;
• air consumption (max): 98 l/min;
• lamp power: 16 W;
• illuminance (max., at a distance of 410 mm): 4.8 lx;
• tank capacity: 1,000 ml;
• number of tanks: 2 - 4;
• sandblasting chamber capacity: 20 l;
• instant stop function: 1;
• silicone coated panel: yes.

Scope of delivery:

• 1 x Prebonder tank: dedicated exclusively to Prebonder surface pro sand with a grain size of 50 µm, includes a special jet nozzle, a spacer pin (control tip);
• additional 2 bar linear pressure reducer, 4 spare spacer pins (control tip);
• 1 test surface for monitoring sandblasting parameters (control pad);
• 1 x classic tank for precision sandblasting 70–250 µm with a 1.2 mm blast nozzle.

Packaging:

• 1 pc.

DENTAL NAVI Volume 3 Digital Dentistry Printed publication A4 format

Dental Navi Volume 3 – Digital Dentistry: Your Guide to Modern Workflow

Discover the potential of digital transformation in your practice with Dental Navi Volume 3 – Digital Dentistry . This specialized 180-page publication, published in a convenient A4 format, is a comprehensive compendium of knowledge that guides the reader step by step through the modern digital workflow.

What will you find inside?

This publication was developed for practitioners who want to stay current with the latest dental technologies. Inside, you'll find substantive articles on:

• Implantology and Prosthetics: Detailed discussion of ICX procedures, All-on-X workflow and the innovative digital twin concept.
• Endodontics and Orthodontics: The use of digital diagnostics EndoInspektor and the role of artificial intelligence (AI) in overlay treatment planning.
• Aesthetics: Practical tips for working with e.max and KATANA™ Zirconia materials.
• Ergonomics and Education: Tips for organizing a healthy workplace and reports and conclusions from the CAD/CAM Congress.

Packaging :

• 1 pc.

Denture boxes with your logo 500 pieces

Denture boxes with your logo.

Available colors to choose from:

• black, blue, fuchsia, green, gray, sky blue, lilac, lime green, orange, pink, red, turquoise, white, yellow.

How to order?

• 1/ Add the product to your cart and pay for the order.
• 2/ Send us in response to your order confirmation (or to mikran@mikran.com):
  • selected color (e.g. blue, pink...)
  • your logo in vector curves (AI, EPS, PDF, SVG, CDR)
• 3/ Within a few days, we will prepare a visualization for you and send it for your approval.
• 4/ After receiving your approval, we will forward your order for processing.
• 5/ We will deliver the boxes with your logo to you within 6-8 weeks.

Packaging:

• 500pcs.

Detax resin Freeprint denture flex pink-transparent 1000g

MDR-certified, light-cured, biocompatible resin for printing flexible removable partial dentures.

For DLP printers with a wavelength of 385 nm.

Does not contain MMA, THF-MA or TPO.

Class IIa medical device.

Advantages:

• short production time, which eliminates labor-intensive work methods;
• the elastic properties of the material ensure high wearing comfort for the patient;
• precise 3D printing and thin material structure ensure a perfect fit and natural look without metal clasps;
• quick processing and easy polishing.

Physical data:

• tensile strength approx. 45 MPa (DIN EN ISO 527-1);
• tensile elongation > 20% (DIN EN ISO 527-1);
• final hardness 78 on the Shore D scale;
• water absorption < 32 µg/mm³ (DIN EN ISO 20795-1);
• solubility < 1.6 µg/mm³ (DIN EN ISO 20795-1).

Packaging:

• 1 pc.

Dreve Phrozen Sonic CS+ 3D printer

A compact, desktop LCD printer with 22 μm resolution, equipped with an innovative 385 nm LED light source. This ensures high exposure intensity, which translates into exceptionally short printing times.

The high-quality full metal housing and improved cuvette and platform handling make the new generation of Phrozen printers extremely user-friendly and ideal for all dental applications.

2 trays and work platforms:

• standard, dimensions (width x depth x height) 74 x 168 x 185 mm³ - has an oblong shape, it is ideal when you need to print, for example, several dental arches at once or a larger number of models in one cycle;
• mini, dimensions (width x depth x height) 75 x 75 x 185 mm³ - has a square base, is intended for very precise, single works (e.g. one crown or abutment).

Characteristics:

• build platform with optimal adhesive properties (excellent print adhesion);
• comprehensive service and technical support from our experts;
• Dreve ElementS Slicer software with optimized print profiles for best results;
• control and monitoring of processes from a PC.

Technical Specifications:

• dimensions (height x width x depth): 500 x 380 x 360 mm;
• weight: approx. 20 kg;
• supply voltage: 100-240 V / 50-60 Hz, 0.7 A;
• layer thickness (Z axis): 0.01 – 0.30 mm (10 – 300 μm).

Scope of delivery:

• litter boxes and platforms in Standard and Mini versions;
• USB flash drive;
• spatula – an essential tool for safely removing finished prints from the build platform;
• funnel – useful for pouring the resin back into the bottle (e.g. to filter it);
• Dreve ElementS software – a professional slicer dedicated to the preparation of dental models.

Packaging:

• 1 pc.

Dynex Brillant Specials test kit - set of 5 NEW !!!

Dynex Brillant diamond separation discs

A specially composed set designed for material-safe preparation and separation of prosthetic restorations made of lithium disilicate and zirconium oxide.

High stability and flexibility: All discs in the set are reinforced with a double layer of fiberglass, which ensures maximum work safety.

Renfert catalog number: 550000

Features:

• minimal thermal impact: prevent material damage (e.g., micro-cracks) thanks to very low heat emission during operation;
• high cutting efficiency: ensure safe and effective cutting of casting/pressing channels thanks to excellent cutting properties and high material removal capacity;
• material protection: extremely low vibration level guarantees gentle treatment of the processed material and greater precision.

The set includes:

• Dynex Brillant CoolCut separation discs: characterized by a 30% reduction in heat generation, which enables extremely gentle and material-structure-safe processing;
• Dynex Brillant QuickCut separation discs: allow for twice as fast and reliable cutting of pressing channels;
• Dynex Brillant UltraLife separation disc: characterized by an exceptionally long service life and wear resistance.

Package contents:

• 2 pcs. Dynex Brillant CoolCut (Art. No. 552520) – Ø 20 × 0.25 mm;
• 2 pcs. Dynex Brillant QuickCut (Art. No. 550320) – Ø 20 × 0.3 mm;
• 1 pc. Dynex Brillant UltraLife (Art. No. 550525) – Ø 25 × 0.5 mm.

Packaging:

• 5 pcs/set

EcoPrint HeatMixer resin mixer with heater NEW

HeatMixer, resin mixer and heater in one.

The HeatMixer is a specialized device designed for heating and mixing photopolymer resins used in 3D printing. It helps achieve optimal resin properties, which directly translates into improved print quality.

The device solves the most common resin problems:

• too low temperature: if the room temperature is below 15°C, HeatMixer will heat the resin to the optimal range of 20-30°C, making it more active;
• high viscosity: heating the resin reduces its viscosity, making it easier to print;
• delamination: the device effectively mixes resins that have been standing unused for a long time;
• color errors: prevents chromatic aberrations by thoroughly mixing pigments;
• Creating mixtures: allows you to easily combine different colors or types of resins.

Key Features and Operation:

• two operating modes: low or fast mode, depending on your needs;
• temperature settings: the device offers three levels: no heating, 40°C and 50°C;
• intelligent control: HeatMixer automatically changes the direction of rotation every 2 minutes and turns off after 3 hours of inactivity;
• intuitive panel: equipped with a screen displaying mode and temperature icons and touch buttons.

Technical specifications:

• product dimensions: 270 x 125 x 180 mm;
• weight: 1325 g;
• supported bottles: 250g / 500g / 1000g;
• heater power: 48 W;
• power supply: AC 100-240V, 50/60 Hz.

Packaging:

• 1 pc.

EcoPrint Model 3D printer for printing models with a starter kit

EcoPrint Model 3D printer for printing models + starter kit

EcoPrint Model: a system for economical printing of prosthetic models thanks to which:

• You can print 6 models in as little as 30 minutes.
• You will achieve printing precision at 16K resolution.
• You will optimize the costs of your business - the cost of printing a model is approximately PLN 6.

The system includes:

• Reconfigured printer - before delivery to your laboratory, each EcoPrint printer is reconfigured to meet the highest quality standards for printers for precision prosthetic models.
• Wash&Cure 3.0 washing and polymerization device - thanks to the use of this device, you will be sure that the printed models will undergo the appropriate post-processing procedure.
• 2 kg of resin for EcoPrint Craftsman DLP models (beige color) - this is the resin we chose due to its unrivaled parameters (accuracy, sharp contours, printing speed).
• Accessories for work - everything you need to print your models immediately after receiving the EcoPrint kit (cuvette, resin strainer, tweezers, masks)
• Free system implementation in your dental practice/office - our consultant is waiting for your call. Implementation will take only 30-45 minutes, helping you avoid failures and ensure excellent results from the very first prints. Patryk Baszuk, MD, will be happy to answer all your questions and help you launch the EcoPrint Model system. patryk.baszuk@mikran.com, tel. +48 798 748 738
• Free after-sales support during the warranty period.
• Post-warranty service.

Advantages of EcoPrint:

• Low price of the system.
• Very low operating costs (approx. PLN 6 per model).
• You will achieve printing precision at 16K resolution.
• Highly reproducible results. Incredibly accurate models.
• Professional implementation and after-sales support.

Packaging:

• EcoPrint Model 3D printer + starter kit.

ECOsil Premium FAST 24 blue 1kg+1kg or set of 3 sets PROMOTION

Two-component addition silicone for duplicating models in dental technology.

Set of 3 sets at a great price - you will save 148 PLN

Characteristics:

• ease of use and high precision of detail reproduction;
• excellent dimensional stability over time;
• excellent compatibility with phosphate (covering) masses, polyurethane resins and plasters;
• blue color.

Application:

• intended for the dental/prosthetic industry for model duplication processes.

Technical specifications:

• component A color: white;
• component B color: light blue;
• density: 1.12 g/cm³;
• viscosity: 4,000 mPa s;
• mixing ratio: (1:1);
• mixing time: 30–45 seconds;
• working time: 4–6 minutes;
• setting time: 10–12 minutes;
• hardness after 24 hours: 23–25 Shore A;

Tips:

• preparation: before use, mix the contents with a clean mixer, this is necessary to homogenize (unify) the mixture;
• important: always close the bottles after use, do not interchange the caps (to avoid cross-contamination and accidental hardening of the material in the bottle).

Packaging:

• 1kg + 1kg
• 3 sets of 1kg + 1kg

FastForm Deskfab X1 metal printer with accessories

DESKFAB X1 Compact SLM 3D Printer for Metal – Dental All-in-One Segment.

This device represents a new class of desktop metal printers, dedicated to modern prosthetic laboratories.

It combines advanced laser sintering technology (SLM) with unprecedented space savings and simplified operation.

Key Features and Technical Innovations;

Spatial Revolution: All-in-One Design:

• The device was designed to maximize space optimization in the laboratory.
• Dimensions: 600 x 650 x 800 mm.
• Work surface: It takes up only 0.39 m², which allows it to be placed directly on the worktop.

Zero-Cost Operation: Maintenance-Free Filtration System:

• An innovative system that eliminates typical service costs associated with metal printing.
• Lifespan: Up to 30,000 operating hours.
• Maintenance-free: Filtration system that does not require filter replacement.
• Safety: Tool-free installation, eliminating the risk of installation errors.

One-Click Print: AI Process Automation:

• Maximum simplification of the path from scan to finished product.
• Artificial Intelligence Support: The process from scanning to the finished project takes just 5 minutes thanks to AI algorithms.
• Operation: One-click printing, ideal for non-technical staff.

Intuitive Installation (Hassle-Free):

• Mistake-Proof: A system of 4 colored connections (channels) that guarantees correct connection of the device and eliminates the risk of mistakes during installation.

LFPT (Laser Follow Powder) technology:

• A proprietary solution that increases production efficiency.
• Innovation: The laser precisely follows the powder application process.
• Efficiency: Speed up the printing process by 20% compared to standard SLM systems.

This device solves the main challenges of SLM technology in dentistry: high filter maintenance costs and large dimensions. Thanks to LFPT technology and modular cartridges, this printer is an ideal solution for laboratories wishing to produce metal frameworks, frames, and titanium abutments in-house using automated technology.

Technical Data:

• Printer model: DeskFab X;
• Dimensions: 650 mm × 640 mm × 800 mm (W × D × H);
• Weight: 120 kg;
• Build platform size: Ø100×80mm (base plate included);
• Laser spot size: 50-80um;
• Laser power: 300 W;
• Minimum oxygen level: ≤100 ppm;
• Scanning speed: 7m/s;
• Layer thickness: 20-150um;
• Laser Source: Single;
• Laser type: CW continuous wave fiber laser;
• Powder application system: Top feed, unidirectional application;
• Printing accuracy: ±50μm;
• Powder container capacity: 1.6 l;
• Power Failure: Auto Resume;
• Recoater type: Soft Blade Recoater – minimizes the risk of print damage;
• Base plate mounting type: Permanent magnetic;
• Filtration system: Permanent filter ≥30,000 hours;
• Composition mode: Automatic composing and path planning;
• Printing material: CoCr.
• Software system: FastLayer layer merging software and FastFab operating software;
• Cooling type: Water cooled;
• Ambient temperature: 15~28℃;
• Ambient humidity: ≤78%;
• Input power: 220V AC, single phase;
• Average output power: 1 kW;
• Protective gas: Nitrogen (N2),Argon (Ar);

Set of tools and accessories:

• Cleaning kit - 1 pc.
• Silicone scraper (spatula) - 20 pcs.
• Workshop tool set - 1 pc.
• Support removal tools - 1 pc.
• Electric chisels/tools for separating prints from the board - 1 pc.
• Cobalt-chrome alloy work plate (base) - 1 pc.
• Water cooler (active cooling system) - 1 pc.
• Nitrogen generator with oil-free pump (for generating a protective atmosphere) - 1 pc.
• Water vacuum cleaner (specialized vacuum cleaner for safe collection of metal dust) - 1 pc.
• Voltage stabilizer 220V, 5kW (protects printer electronics) - 1 pc.
• Powder sifter with one sieve - 1 pc.
• Powder dryer (oven for drying material before printing) - 1 pc.
• Heat treatment furnace (vacuum-free) - used for stress relief of prints after the SLM process - 1 pc.

Formlabs Form 4L 3D Printer + Starter Kit

Form 4L: Large dimensions, dizzying speed

The Form 4L is a lightning-fast, large-format MSLA (Masked SLA) 3D printer that combines an industry-leading material library with a reliable and precise printing system.

With the Form 4L ecosystem, you can print high-volume diagnostic and working models faster than ever before, guaranteeing perfect reproduction of anatomical structures.

The speed of the Form 4L is thanks to Formlabs' new Low Force Display™ (LFD) printing system. This powerful combination of ultra-high-power LEDs, collimating lenses, optical filters, and a durable LCD screen work together to rapidly cure each resin layer—regardless of size or number of models being printed. Thanks to rigorous dimensional tolerances, parts printed on the Form 4L from any resin will perfectly match your design specifications every time.

Characteristics:

• truly mass printing: the wide platform allows you to place several dozen dental arches flat on the platform or over hundreds vertically (vertically, Form 4L accommodates models up to 35 cm high!);
• XY accuracy of 50 µm: precision that guarantees perfect fit across the entire platform surface.

Technical Specifications:

• printing technology: Low Force Display™ (LFD) / Masked SLA (MSLA);
• working area: 353 × 196 × 350 mm (24.2 liters);
• XY resolution (pixel size): 50 µm;
• layer height (Z): 25 – 300 µm;
• backlight system: Light Processing Unit 4L (LPU 4L);
• Print time (example): most models in under 6 hours.

Set composition:

• Form 4L Printer – Formlabs Form 4L 3D printer;
• Form 4L Resin Tank – Form 4L resin tank;
• Form 4L Mixer – Form 4L resin mixer (automatically mixes resin before and during printing);
• Form 4L Build Platform – Form 4L Build Platform;
• Form 4L Finish Kit: Rinse Bucket – Finish Kit: Container (bucket) for rinsing prints;
• Form 4L Finish Kit: Cleaning Tools – Finish Kit: Tools for cleaning and post-processing.

Formlabs Form Cure L V2 light polymerization device

The Formlabs Form Cure L V2 is the latest generation of large-format post-curing chamber, created as a key complement to the Form 4 and Form 4L printer ecosystem.

Characteristics:

• Express workflow: General Purpose resins cure in just 60 seconds, and advanced engineering or biocompatible materials cure in just 3–15 minutes;
• powerful convection heating: two 700 W heaters allow you to reach a chamber temperature of up to 100 °C (ideal for advanced engineering and dental resins);
• homogeneous exposure: up to 96 multi-directional high-power LEDs combined with a glass turntable ensure that the light reaches every corner of the model evenly;
• database of profiles (Presets): over 45 ready-made programs adapted to each Formlabs resin, guaranteeing repeatability of mechanical parameters and biocompatibility certification.

Technical Specifications;

• device dimensions (W x D x H): 50.7 × 54.3 × 54.5 cm;
• device weight: 40.0 kg;
• turntable diameter: 404 mm (40.4 cm);
• maximum height of the hardened model: 365 mm;
• maximum exposure area (Curing Volume): 42.3 × 42.3 × 36.5 cm;
• light source: 96 multi-directional LEDs;
• light wavelength: 405 nm (tolerance 400 - 410 nm);
• LED module electrical power: 350 W;
• LED radiation power (total): 120 W;
• maximum chamber temperature: 100 °C;
• heating system; convection (2x heaters with a total power of 1400 W);
• Heat-up time (EU version): up to 60 °C in 150 seconds | up to 80 °C in 360 seconds;
• control and interface: touchscreen display with profiles and manual mode;
• connectivity: USB-C port (for firmware updates);
• Mains requirements (EU): 220–240 VAC, 50–60 Hz, 8 A;
• noise emission: < 55 dB(A).

Ergonomic tip:

• When planning the workspace, it should be taken into account that the chamber flap opens to the side, and the device, due to its weight (40 kg), requires a stable worktop with a minimum depth of approximately 110 cm (to ensure full, free service access and ventilation).

Packaging:

• 1 pc.

Forte 200 / H500 prosthetic micromotor "SLIM" version

Saeshin Forte 200 α prosthetic micromotor with H 500 light handpiece.

• Brushless micro motor, knee controller with additional foot pedal.

• High speed control (up to 50,000 rpm) and high power minimize vibration while providing sufficient power even at low speeds.

Characteristics:

• handpiece weight 222g;
• handpiece size 170.5 x Φ29mm;
• knee type;
• ergonomic;
• excellent durability;
• minimal noise and vibration;
• maximum efficiency;
• built-in microprocessor (self-diagnosis, error signaling, working memory storage functions and automatic handpiece recognition);
• right/left rotation of the micromotor;
• 50000 rpm;
• max. torque: 7.8N.cm;
• power 230W;
• 12-month warranty.

Packaging:

• 1 pc.

Intraoral scanner console - universal

A compact and elegant console designed for seamless touchscreen integration.

Characteristics:

• adjustable computer compartment (thanks to a simple adjustment mechanism, you can change the width of the compartment from 20 cm to 29 cm, ensuring a perfect fit for any computer);
• durable, adjustable aluminum scanner holder;
• designed specifically for touch screens;
• adjustable monitor arm with tilt and forward-pull function for easy use of the touchscreen.

Technical specifications:

• the dimensions of the 3DDS housing are 52 cm (W) x 36 cm (D) x 60 cm (H) (plus an additional 66 cm for the holder and monitor);
• the dimensions of the computer compartment are from 20 cm (width) to 28 cm (depth) x 50 cm (depth) x 50 cm (height);
• made of lightweight aluminum, 3mm thick;
• weight 15kg;
• adjustable monitor arm with tilt and forward-pull function for easy touchscreen operation, supports 100 x 100 mm and 75 x 75 mm formats;
• 75 mm diameter wheels with the possibility of 360 degrees rotation, made of special polyamide rubber, ensure smooth mobility;
• The front wheels have a locking mechanism that allows you to lock both rotation and movement, providing additional stability and control.

Packaging:

• 1 pc.

IP Clean 4D PRO steam generator

The high-end IP Clean 4D PRO steam cleaner was specifically designed to meet the demanding requirements of modern dental technology. Thanks to its advanced technology and robust design, it sets new standards in performance. With four powerful functions and intelligent automation, it is the ideal solution for both traditional applications and digital production processes such as 3D printing.

Unlimited and autonomous operation thanks to the direct water supply with automatic filling. Integrated water sensors and an automatic filling pump automatically refill the stainless steel boiler with water, regardless of the mains pressure, facilitating uninterrupted daily operation. For greater comfort, the use of water softeners, such as the compatible IP Clean Filter water softener, is recommended due to its constant contact with tap water.

4 cleaning modes provide maximum flexibility and time savings:

• Saturated steam (4–5 bar): High-temperature dry steam removes even the most stubborn dirt, grease, and oil residues without the use of chemicals. Ideal for hygienic applications and delicate materials.
• Wet steam (4-5 bar): Wet steam with high cleaning power effectively removes dirt and makes it easier to wipe away residue. Especially suitable for areas requiring thorough cleaning, such as easily removing wax residue.
• Cold steam (6–8 bar): This intelligent function enables gentle yet effective cleaning of delicate surfaces. Particularly suitable for heat-sensitive and easily deformed materials. Dirt and residue can be removed without damaging the workpiece. This function can also be used to stabilize and cool the surface temperature of materials during steam operation.
• Compressed air (6–8 bar): Powerful compressed air for dust removal and drying of workpieces.

Characteristics:

• automatic filling via permanent water connection;
• continuous operation without interruption;
• integrated water softening filter;
• durable materials: stainless steel housing and boiler;
• external heating system: extremely durable and well-protected heating element.

Technical data:

• boiler capacity: 5l;
• max. working pressure: 5bar;
• power: 1500 W;
• voltage: 230 V / 50 Hz;
• dimensions (length x width x height): 250x380x330mm;
• weight: approx. 15 kg; -water connection: G ¾";
• connection pressure: 1 - 5 bar.

Packaging:

• 1 pc.

IP Clean 4D steam generator

The revolutionary 4-in-1 steam generator ensures maximum efficiency in your studio.

The high-end IP Clean 4D steam cleaner was specifically designed to meet the demanding requirements of modern dental technology. Its advanced technology and robust design set new standards in performance. With four advanced features and intelligent automation, it is the ideal solution for both traditional applications and digital production processes such as 3D printing.

Unlimited, autonomous operation thanks to the integrated water pump and level sensors, with automatic filling via an external tank, simplifies daily operation without interruption. An integrated and easily replaceable softener filter with a capacity of 25-60 liters (depending on water hardness) allows the device to be safely filled with tap water or, optionally, distilled water.

4 cleaning modes provide maximum flexibility and time savings:

• Saturated steam (4–5 bar): High-temperature, dry steam removes even the most stubborn dirt, grease, and oil residues without the use of chemicals. Ideal for hygienic applications and delicate materials.
• Wet steam (4-5 bar): Wet steam with high cleaning power effectively removes dirt and makes it easier to wipe away residue. Especially suitable for areas requiring thorough cleaning, such as easily removing wax residue.
• Cold steam (6–8 bar): This intelligent function enables gentle yet effective cleaning of delicate surfaces. Particularly suitable for heat-sensitive and easily deformed materials. Dirt and residue can be removed without damaging the workpiece. This function can also be used to stabilize and cool the surface temperature of materials during steam operation.
• Compressed air (6–8 bar): Powerful compressed air for dust removal and drying of workpieces.

Characteristics:

• automatic filling from an external 5-liter tank;
• constant readiness to work without interruptions;
• integrated water softening filter;
• durable materials: stainless steel housing and boiler;
• external heating system: extremely durable and well-protected heating element.

Technical data:

• boiler capacity: 5l;
• external tank capacity: 5l;
• max. working pressure: 5bar;
• compressed air connection: 6-10 bar;
• power: 1500 W;
• voltage: 230 V / 50 Hz;
• dimensions (length x width x height): 250x380x330mm;
• weight: approx. 15 kg;

Packaging:

• 1 pc.

IPS e.max Ceram Art Essence & Shade Assortment

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• the set includes:

• 1x Essence Paste white (3g)

• 1x Essence Paste cream (3g)
• 1x Essence Paste lemon (3g)
• 1x Essence Paste sunset (3g)
• 1x Essence Paste copper (3g)
• 1x Essence Paste khaki (3g)
• 1x Essence Paste mahogany (3g)
• 1x Essence Paste anthracite (3g)
• 1x Shade Dentin 1 (3g)
• 1x Shade Dentin 2 (3g)
• 1x Shade Dentin 3 (3g)
• 1x Shade Dentin 4 (3g)
• 1x Shade Dentin 5 (3g)
• 1x Shade Incisal 1 (3g)
• 1x Shade Incisal 2 (3g)
• 1x Magic Glaze Paste FLU (3g)
• 1x Universal Liquid (60ml)

IPS e.max Ceram Art Essence 3g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Essence 3g

IPS e.max Ceram Art Gingiva Illusion & Structure

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• the set includes:

• 1x Illusion Paste Gingiva Basis rose (5g)

• 1x Illusion Paste Gingiva Basis pink (5g)
• 1x Illusion Paste Gingiva Basis orange-pink (5g)
• 1x Illusion Paste Gingiva Effect soft-mauve (5g)
• 1x Illusion Paste Gingiva Effect intense-mauve (5g)
• 1x Illusion Paste Gingiva Effect soft-bone (5g)
• 1x Illusion Paste Gingiva Effect intense-bone (5g)
• 1x Illusion Paste Gingiva Effect capillary (5g)
• 1x Illusion Paste Gingiva Effect fibers (5g)
• 1x Illusion Paste Gingiva Effect Margin light (5g)
• 1x Illusion Paste Gingiva Effect Margin dark (5g)
• 1x Illusion Paste Gingiva Effect intense-red (5g)
• 1x Structure Paste Gingiva soft-pink (5g)
• 1x Structure Paste Gingiva pink (5g)
• 1x Magic Glaze Paste (3g)
• 1x Universal Liquid (60ml)

IPS e.max Ceram Art Illusion & Structure Assortment

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• the set includes:

• 1x Illusion Paste Mamelon reddish-orange (5g)

• 1x Illusion Paste Mamelon light-salmon (5g)
• 1x Illusion Paste Opal light-blue (5g)
• 1x Illusion Paste Opal sky-blue (5g)
• 1x Illusion Paste Opal night-blue (5g)
• 1x Illusion Paste Halo ivory (5g)
• 1x Illusion Paste Halo ocher (5g)
• 1x Illusion Paste Enamel pearl (5g)
• 1x Illusion Paste Absorber light-violet (5g)
• 1x Illusion Paste Fog Absorber (5g)
• 1x Illusion Paste Absorber quartz (5g)
• 1x Illusion Paste Cervical yellow-pink (5g)
• 1x Illusion Paste Cervical nude (5g)
• 1x Structure Paste neutral (5g)
• 1x Structure Paste cloud (5g)
• 1x Shade Dentin 2 (3g)
• 1x Shade Dentin 3 (3g)
• 1x Magic Glaze Paste FLU (3g)
• 1x Universal Liquid (60ml)

IPS e.max Ceram Art Illusion Paste 5g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Illusion Paste 5g

IPS e.max Ceram Art Illusion Paste Gingiva 5g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Illusion Paste Gingiva 5g

IPS e.max Ceram Art Magic Glaze 3g or 9g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Magic Glaze 3g or 9g

IPS e.max Ceram Art Magic Glaze FLUO 3g or 9g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Magic Glaze FLUO 3g or 9g

IPS e.max Ceram Art Shade Dentin 3g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used to characterize and glaze a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables colouring and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly where they are applied, retaining their color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, ensuring safe application and rich color effects.

Packaging:

• Shade dentin 3g

IPS e.max Ceram Art Shade Incisal 3g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Shade Incisal 3g

IPS e.max Ceram Art Structur Gingiva 5g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Structur Gingiva 5g

IPS e.max Ceram Art Structure Paste 5g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Structure Paste 5g

IPS e.max Ceram Art Universal liquid 15ml or 60ml

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Universal liquid 15ml or 60ml

IPS e.max Zirconia 98.5-18mm NEW

IPS e.max® Zirconia is a yttrium-stabilized zirconia (4Y-PSZ / 5Y-PSZ) designed for all types of fixed all-ceramic restorations – one disc that truly does it all.

• A new definition of versatility – one disc, all applications: from thin veneers to full arch restorations.

• Aesthetics redefined – next-generation GTx technology: delivers a smooth progression of transparency, shade and durability, as well as exceptional color accuracy.

• Efficiency redefined – ultra-fast sintering without compromising aesthetics: 58 minutes for 3-unit bridge restorations, 2 hours 57 minutes for larger cases up to a full arch.

• Reliable in combination with IPS e.max Ceram Art.

Developed in close collaboration with our customers, IPS e.max Zirconia redefines versatility, aesthetics, performance, and reliability. From thin veneers to long-span restorations, this material enables precise fabrication with unparalleled aesthetic quality.

Technical data:

• diameter: 98.5 mm;
• height: 12, 14, 16, 18, 22, 25, 30 mm;
• colors: 16 AD, 4 BL;
• bending strength: 1,200 MPa;
• flexural strength [incisal edge]: 800 MPa;
• fracture toughness: 3.7 MPa*m0.5;
• CTE (25-500oC) [10-6/K]: 10.2±0.5;
• chemical solubility [µg/cm2]: <100.

Aesthetics inside and out:

• advanced GTx technology refines the disc's microstructure, redefining its optical properties as well as the material's behavior during milling and sintering;
• The key aesthetics are embedded in the disc's structure thanks to the unique powder composition and manufacturing process. The disc's intelligent architecture ensures predictable results – both in terms of shade and durability.

Advantages:

• unlimited possibilities: a comprehensive range of restorations – from thin veneers to extensive restorations, process flexibility and optional characterisation, as individual as each clinical case – streamlining the production process;
• As fast as you need it: Ultra-fast sintering options accelerate production and increase process efficiency. 2 hours 57 minutes for large restorations up to full arches, 58 minutes for smaller restorations up to 3-unit bridges. Optimized for efficiency while maintaining consistent, predictable, and aesthetic results;
• Perfect match every time: a complete color portfolio with 20 proven, highly precise AD and BL shades. Excellent color matching confirmed by international experts. A unique manufacturing process increases durability, accuracy of fit, and color fidelity. Combined with IPS e.max Zirconia Color Liquids and the IPS e.max Ceram Art and IPS e.max Ceram systems, it allows you to achieve a new level of aesthetics;
• Crisp details: Impressive edge stability ensures high process reliability and smooth surfaces. Optimized surface quality immediately after milling. RFID tag enables fast and efficient order processing.
• Tailor-made precision: An optimized portfolio of disc heights (from 12 to 30 mm) provides flexibility for every clinical situation. Perfectly coordinated with the entire IPS e.max product family.

Packaging:

• 1 pc.

IPS e.max Zirconia 98.5x12mm NEW

IPS e.max® Zirconia is a yttrium-stabilized zirconia (4Y-PSZ / 5Y-PSZ) designed for all types of fixed all-ceramic restorations – one disc that truly does it all.

• A new definition of versatility – one disc, all applications: from thin veneers to full arch restorations.

• Aesthetics redefined – next-generation GTx technology: delivers a smooth progression of transparency, shade and durability, as well as exceptional color accuracy.

• Efficiency redefined – ultra-fast sintering without compromising aesthetics: 58 minutes for 3-unit bridge restorations, 2 hours 57 minutes for larger cases up to a full arch.

• A new definition of trust - the quality guarantee of IPS e.max - a proven and fully compatible system, developed in close cooperation with leading experts to meet the changing needs of modern dental laboratories

Developed in close collaboration with our customers, IPS e.max Zirconia redefines versatility, aesthetics, performance, and reliability. From thin veneers to long-span restorations, this material enables precise fabrication with unparalleled aesthetic quality.

Technical data:

• diameter: 98.5 mm;
• height: 12, 14, 16, 18, 22, 25, 30 mm;
• colors: 16 AD, 4 BL;
• bending strength: 1,200 MPa;
• flexural strength [incisal edge]: 800 MPa;
• fracture toughness: 3.7 MPa*m0.5;
• CTE (25-500oC) [10-6/K]: 10.2±0.5;
• chemical solubility [µg/cm2]: <100.

Aesthetics inside and out:

• advanced GTx technology refines the disc's microstructure, redefining its optical properties as well as the material's behavior during milling and sintering;
• The key aesthetics are embedded in the disc's structure thanks to the unique powder composition and manufacturing process. The disc's intelligent architecture ensures predictable results – both in terms of shade and durability.

Advantages:

• unlimited possibilities: a comprehensive range of restorations – from thin veneers to extensive restorations, process flexibility and optional characterisation, as individual as each clinical case – streamlining the production process;
• As fast as you need it: Ultra-fast sintering options accelerate production and increase process efficiency. 2 hours 57 minutes for large restorations up to full arches, 58 minutes for smaller restorations up to 3-unit bridges. Optimized for efficiency while maintaining consistent, predictable, and aesthetic results;
• Perfect match every time: a complete color portfolio with 20 proven, highly precise AD and BL shades. Excellent color matching confirmed by international experts. A unique manufacturing process increases durability, accuracy of fit, and color fidelity. Combined with IPS e.max Zirconia Color Liquids and the IPS e.max Ceram Art and IPS e.max Ceram systems, it allows you to achieve a new level of aesthetics;
• Crisp details: Impressive edge stability ensures high process reliability and smooth surfaces. Optimized surface quality immediately after milling. RFID tag enables fast and efficient order processing.
• Tailor-made precision: An optimized portfolio of disc heights (from 12 to 30 mm) provides flexibility for every clinical situation. Perfectly coordinated with the entire IPS e.max product family.

Packaging:

• 1 pc.

IPS e.max Zirconia 98.5x14mm NEW

IPS e.max® Zirconia is a yttrium-stabilized zirconia (4Y-PSZ / 5Y-PSZ) designed for all types of fixed all-ceramic restorations – one disc that truly does it all.

• A new definition of versatility – one disc, all applications: from thin veneers to full arch restorations.

• Aesthetics redefined – next-generation GTx technology: delivers a smooth progression of transparency, shade and durability, as well as exceptional color accuracy.

• Efficiency redefined – ultra-fast sintering without compromising aesthetics: 58 minutes for 3-unit bridge restorations, 2 hours 57 minutes for larger cases up to a full arch.

• Reliable in combination with IPS e.max Ceram Art.

Developed in close collaboration with our customers, IPS e.max Zirconia redefines versatility, aesthetics, performance, and reliability. From thin veneers to long-span restorations, this material enables precise fabrication with unparalleled aesthetic quality.

Technical data:

• diameter: 98.5 mm;
• height: 12, 14, 16, 18, 22, 25, 30 mm;
• colors: 16 AD, 4 BL;
• bending strength: 1,200 MPa;
• flexural strength [incisal edge]: 800 MPa;
• fracture toughness: 3.7 MPa*m0.5;
• CTE (25-500oC) [10-6/K]: 10.2±0.5;
• chemical solubility [µg/cm2]: <100.

Aesthetics inside and out:

• advanced GTx technology refines the disc's microstructure, redefining its optical properties as well as the material's behavior during milling and sintering;
• The key aesthetics are embedded in the disc's structure thanks to the unique powder composition and manufacturing process. The disc's intelligent architecture ensures predictable results – both in terms of shade and durability.

Advantages:

• unlimited possibilities: a comprehensive range of restorations – from thin veneers to extensive restorations, process flexibility and optional characterisation, as individual as each clinical case – streamlining the production process;
• As fast as you need it: Ultra-fast sintering options accelerate production and increase process efficiency. 2 hours 57 minutes for large restorations up to full arches, 58 minutes for smaller restorations up to 3-unit bridges. Optimized for efficiency while maintaining consistent, predictable, and aesthetic results;
• Perfect match every time: a complete color portfolio with 20 proven, highly precise AD and BL shades. Excellent color matching confirmed by international experts. A unique manufacturing process increases durability, accuracy of fit, and color fidelity. Combined with IPS e.max Zirconia Color Liquids and the IPS e.max Ceram Art and IPS e.max Ceram systems, it allows you to achieve a new level of aesthetics;
• Crisp details: Impressive edge stability ensures high process reliability and smooth surfaces. Optimized surface quality immediately after milling. RFID tag enables fast and efficient order processing.
• Tailor-made precision: An optimized portfolio of disc heights (from 12 to 30 mm) provides flexibility for every clinical situation. Perfectly coordinated with the entire IPS e.max product family.

Packaging:

• 1 pc.

IPS e.max Zirconia 98.5x16mm NEW

IPS e.max® Zirconia is a yttrium-stabilized zirconia (4Y-PSZ / 5Y-PSZ) designed for all types of fixed all-ceramic restorations – one disc that truly does it all.

• A new definition of versatility – one disc, all applications: from thin veneers to full arch restorations.

• Aesthetics redefined – next-generation GTx technology: delivers a smooth progression of transparency, shade and durability, as well as exceptional color accuracy.

• Efficiency redefined – ultra-fast sintering without compromising aesthetics: 58 minutes for 3-unit bridge restorations, 2 hours 57 minutes for larger cases up to a full arch.

• Reliable in combination with IPS e.max Ceram Art.

Developed in close collaboration with our customers, IPS e.max Zirconia redefines versatility, aesthetics, performance, and reliability. From thin veneers to long-span restorations, this material enables precise fabrication with unparalleled aesthetic quality.

Technical data:

• diameter: 98.5 mm;
• height: 12, 14, 16, 18, 22, 25, 30 mm;
• colors: 16 AD, 4 BL;
• bending strength: 1,200 MPa;
• flexural strength [incisal edge]: 800 MPa;
• fracture toughness: 3.7 MPa*m0.5;
• CTE (25-500oC) [10-6/K]: 10.2±0.5;
• chemical solubility [µg/cm2]: <100.

Aesthetics inside and out:

• advanced GTx technology refines the disc's microstructure, redefining its optical properties as well as the material's behavior during milling and sintering;
• The key aesthetics are embedded in the disc's structure thanks to the unique powder composition and manufacturing process. The disc's intelligent architecture ensures predictable results – both in terms of shade and durability.

Advantages:

• unlimited possibilities: a comprehensive range of restorations – from thin veneers to extensive restorations, process flexibility and optional characterisation, as individual as each clinical case – streamlining the production process;
• As fast as you need it: Ultra-fast sintering options accelerate production and increase process efficiency. 2 hours 57 minutes for large restorations up to full arches, 58 minutes for smaller restorations up to 3-unit bridges. Optimized for efficiency while maintaining consistent, predictable, and aesthetic results;
• Perfect match every time: a complete color portfolio with 20 proven, highly precise AD and BL shades. Excellent color matching confirmed by international experts. A unique manufacturing process increases durability, accuracy of fit, and color fidelity. Combined with IPS e.max Zirconia Color Liquids and the IPS e.max Ceram Art and IPS e.max Ceram systems, it allows you to achieve a new level of aesthetics;
• Crisp details: Impressive edge stability ensures high process reliability and smooth surfaces. Optimized surface quality immediately after milling. RFID tag enables fast and efficient order processing.
• Tailor-made precision: An optimized portfolio of disc heights (from 12 to 30 mm) provides flexibility for every clinical situation. Perfectly coordinated with the entire IPS e.max product family.

Packaging:

• 1 pc.

IPS e.max Zirconia 98.5x22mm NEW

IPS e.max® Zirconia is a yttrium-stabilized zirconia (4Y-PSZ / 5Y-PSZ) designed for all types of fixed all-ceramic restorations – one disc that truly does it all.

• A new definition of versatility – one disc, all applications: from thin veneers to full arch restorations.

• Aesthetics redefined – next-generation GTx technology: delivers a smooth progression of transparency, shade and durability, as well as exceptional color accuracy.

• Efficiency redefined – ultra-fast sintering without compromising aesthetics: 58 minutes for 3-unit bridge restorations, 2 hours 57 minutes for larger cases up to a full arch.

• Reliable in combination with IPS e.max Ceram Art.

Developed in close collaboration with our customers, IPS e.max Zirconia redefines versatility, aesthetics, performance, and reliability. From thin veneers to long-span restorations, this material enables precise fabrication with unparalleled aesthetic quality.

Technical data:

• diameter: 98.5 mm;
• height: 12, 14, 16, 18, 22, 25, 30 mm;
• colors: 16 AD, 4 BL;
• bending strength: 1,200 MPa;
• flexural strength [incisal edge]: 800 MPa;
• fracture toughness: 3.7 MPa*m0.5;
• CTE (25-500oC) [10-6/K]: 10.2±0.5;
• chemical solubility [µg/cm2]: <100.

Aesthetics inside and out:

• advanced GTx technology refines the disc's microstructure, redefining its optical properties as well as the material's behavior during milling and sintering;
• The key aesthetics are embedded in the disc's structure thanks to the unique powder composition and manufacturing process. The disc's intelligent architecture ensures predictable results – both in terms of shade and durability.

Advantages:

• unlimited possibilities: a comprehensive range of restorations – from thin veneers to extensive restorations, process flexibility and optional characterisation, as individual as each clinical case – streamlining the production process;
• As fast as you need it: Ultra-fast sintering options accelerate production and increase process efficiency. 2 hours 57 minutes for large restorations up to full arches, 58 minutes for smaller restorations up to 3-unit bridges. Optimized for efficiency while maintaining consistent, predictable, and aesthetic results;
• Perfect match every time: a complete color portfolio with 20 proven, highly precise AD and BL shades. Excellent color matching confirmed by international experts. A unique manufacturing process increases durability, accuracy of fit, and color fidelity. Combined with IPS e.max Zirconia Color Liquids and the IPS e.max Ceram Art and IPS e.max Ceram systems, it allows you to achieve a new level of aesthetics;
• Crisp details: Impressive edge stability ensures high process reliability and smooth surfaces. Optimized surface quality immediately after milling. RFID tag enables fast and efficient order processing.
• Tailor-made precision: An optimized portfolio of disc heights (from 12 to 30 mm) provides flexibility for every clinical situation. Perfectly coordinated with the entire IPS e.max product family.

Packaging:

• 1 pc.

IPS e.max Zirconia 98.5x25mm NEW

IPS e.max® Zirconia is a yttrium-stabilized zirconia (4Y-PSZ / 5Y-PSZ) designed for all types of fixed all-ceramic restorations – one disc that truly does it all.

• A new definition of versatility – one disc, all applications: from thin veneers to full arch restorations.

• Aesthetics redefined – next-generation GTx technology: delivers a smooth progression of transparency, shade and durability, as well as exceptional color accuracy.

• Efficiency redefined – ultra-fast sintering without compromising aesthetics: 58 minutes for 3-unit bridge restorations, 2 hours 57 minutes for larger cases up to a full arch.

• Reliable in combination with IPS e.max Ceram Art.

Developed in close collaboration with our customers, IPS e.max Zirconia redefines versatility, aesthetics, performance, and reliability. From thin veneers to long-span restorations, this material enables precise fabrication with unparalleled aesthetic quality.

Technical data:

• diameter: 98.5 mm;
• height: 12, 14, 16, 18, 22, 25, 30 mm;
• colors: 16 AD, 4 BL;
• bending strength: 1,200 MPa;
• flexural strength [incisal edge]: 800 MPa;
• fracture toughness: 3.7 MPa*m0.5;
• CTE (25-500oC) [10-6/K]: 10.2±0.5;
• chemical solubility [µg/cm2]: <100.

Aesthetics inside and out:

• advanced GTx technology refines the disc's microstructure, redefining its optical properties as well as the material's behavior during milling and sintering;
• The key aesthetics are embedded in the disc's structure thanks to the unique powder composition and manufacturing process. The disc's intelligent architecture ensures predictable results – both in terms of shade and durability.

Advantages:

• unlimited possibilities: a comprehensive range of restorations – from thin veneers to extensive restorations, process flexibility and optional characterisation, as individual as each clinical case – streamlining the production process;
• As fast as you need it: Ultra-fast sintering options accelerate production and increase process efficiency. 2 hours 57 minutes for large restorations up to full arches, 58 minutes for smaller restorations up to 3-unit bridges. Optimized for efficiency while maintaining consistent, predictable, and aesthetic results;
• Perfect match every time: a complete color portfolio with 20 proven, highly precise AD and BL shades. Excellent color matching confirmed by international experts. A unique manufacturing process increases durability, accuracy of fit, and color fidelity. Combined with IPS e.max Zirconia Color Liquids and the IPS e.max Ceram Art and IPS e.max Ceram systems, it allows you to achieve a new level of aesthetics;
• Crisp details: Impressive edge stability ensures high process reliability and smooth surfaces. Optimized surface quality immediately after milling. RFID tag enables fast and efficient order processing.
• Tailor-made precision: An optimized portfolio of disc heights (from 12 to 30 mm) provides flexibility for every clinical situation. Perfectly coordinated with the entire IPS e.max product family.

Packaging:

• 1 pc.

IPS e.max Zirconia 98.5x30mm NEW

IPS e.max® Zirconia is a yttrium-stabilized zirconia (4Y-PSZ / 5Y-PSZ) designed for all types of fixed all-ceramic restorations – one disc that truly does it all.

• A new definition of versatility – one disc, all applications: from thin veneers to full arch restorations.

• Aesthetics redefined – next-generation GTx technology: delivers a smooth progression of transparency, shade and durability, as well as exceptional color accuracy.

• Efficiency redefined – ultra-fast sintering without compromising aesthetics: 58 minutes for 3-unit bridge restorations, 2 hours 57 minutes for larger cases up to a full arch.

• Reliable in combination with IPS e.max Ceram Art.

Developed in close collaboration with our customers, IPS e.max Zirconia redefines versatility, aesthetics, performance, and reliability. From thin veneers to long-span restorations, this material enables precise fabrication with unparalleled aesthetic quality.

Technical data:

• diameter: 98.5 mm;
• height: 12, 14, 16, 18, 22, 25, 30 mm;
• colors: 16 AD, 4 BL;
• bending strength: 1,200 MPa;
• flexural strength [incisal edge]: 800 MPa;
• fracture toughness: 3.7 MPa*m0.5;
• CTE (25-500oC) [10-6/K]: 10.2±0.5;
• chemical solubility [µg/cm2]: <100.

Aesthetics inside and out:

• advanced GTx technology refines the disc's microstructure, redefining its optical properties as well as the material's behavior during milling and sintering;
• The key aesthetics are embedded in the disc's structure thanks to the unique powder composition and manufacturing process. The disc's intelligent architecture ensures predictable results – both in terms of shade and durability.

Advantages:

• unlimited possibilities: a comprehensive range of restorations – from thin veneers to extensive restorations, process flexibility and optional characterisation, as individual as each clinical case – streamlining the production process;
• As fast as you need it: Ultra-fast sintering options accelerate production and increase process efficiency. 2 hours 57 minutes for large restorations up to full arches, 58 minutes for smaller restorations up to 3-unit bridges. Optimized for efficiency while maintaining consistent, predictable, and aesthetic results;
• Perfect match every time: a complete color portfolio with 20 proven, highly precise AD and BL shades. Excellent color matching confirmed by international experts. A unique manufacturing process increases durability, accuracy of fit, and color fidelity. Combined with IPS e.max Zirconia Color Liquids and the IPS e.max Ceram Art and IPS e.max Ceram systems, it allows you to achieve a new level of aesthetics;
• Crisp details: Impressive edge stability ensures high process reliability and smooth surfaces. Optimized surface quality immediately after milling. RFID tag enables fast and efficient order processing.
• Tailor-made precision: An optimized portfolio of disc heights (from 12 to 30 mm) provides flexibility for every clinical situation. Perfectly coordinated with the entire IPS e.max product family.

Packaging:

• 1 pc.

IPS e.max Zirconia Color Liquid 15ml NEW

IPS e.max Zirconia Color Liquid are specialized liquid dyes that are used to characterize restorations before the sintering process (in the "soft" state).

Application (Infiltration Technique):

• These liquids are applied to milled but not yet sintered zirconium oxide restorations. Because the material is porous, the dye penetrates deep into the structure rather than remaining on the surface.

Advantages:

• Integrated color indicator: This feature allows for precise control of the application process by temporarily tinting the preparation. This allows the technician to precisely monitor the extent and intensity of the applied liquid on the unsintered structure. The color indicator burns completely during the sintering process, leaving no impact on the final aesthetics of the restoration.
• individualization: although IPS e.max Zirconia discs already have a built-in gradient (GTx technology), Color Liquids allow you to "color" places that require special attention (e.g. a very dark tooth pillar);
• color depth: because the dye is inside the structure, the restoration looks natural even with little space for ceramic characterization (Ceram Art);
• without affecting strength: Ivoclar has developed them so that they do not weaken the structure of the zirconium and do not affect its stability during shrinkage in the furnace.

Packaging:

• 1 pc./15ml

IPS e.max Zirconia Color Liquid Diluter 60ml NEW

A diluting liquid designed to modify the intensity of IPS e.max Zirconia Color and Effect Liquids. It allows the technician to precisely dilute the pigment saturation, allowing for even more subtle color transitions and transparency effects.

Packaging:

• 1 pc./60ml

IPS e.max Zirconia Coloring Liquid Jar 1 pc NEW

Purity and efficiency in the dyeing process.

• A specially designed jar for applying coloring fluids, ensuring maximum convenience and hygiene in the dental laboratory.

• This is an ideal solution for technicians who prefer the immersion technique, guaranteeing even color saturation of the restoration.

Characteristics:

• optimal tightness: equipped with a tight-fitting cap that prevents evaporation of liquids and protects them from environmental contamination, which extends the life of the dyes;
• ergonomic shape: wide opening allows free immersion of even large bridges, ensuring easy access to the restoration;
• chemical resistance: made of high-quality material resistant to the components of dyeing liquids, which guarantees that the material will not react with the dye;
• transparency: transparent walls make it easier to control the fluid level and quickly identify the color inside.

Packaging:

• 1 pc.

IPS e.max Zirconia Coloring Liquid Kit NEW

IPS e.max Zirconia Color Liquid are specialized liquid dyes that are used to characterize restorations before the sintering process (in the "soft" state).

Application (Infiltration Technique):

• These liquids are applied to milled but not yet sintered zirconium oxide restorations. Because the material is porous, the dye penetrates deep into the structure rather than remaining on the surface.

Set composition:

• liquid color: A1, A2, A3, A3.5;
• effect liquid: Snow (white), Hazel (hazel), Sunset (orange), Berry (berry); Sky (blue), Storm (gray), opaque.

Advantages:

• individualization: although IPS e.max Zirconia discs already have a built-in gradient (GTx technology), Color Liquids allow you to "color" places that require special attention (e.g. a very dark tooth pillar);
• color depth: because the dye is inside the structure, the restoration looks natural even with little space for ceramic characterization (Ceram Art);
• without affecting strength: Ivoclar has developed them so that they do not weaken the structure of the zirconium and do not affect its stability during shrinkage in the furnace.

Packaging:

• 1 pc./15ml

IPS e.max Zirconia Effect Liquid 15ml NEW

IPS e.max Zirconia Color Liquid are specialized liquid dyes that are used to characterize restorations before the sintering process (in the "soft" state).

Application (Infiltration Technique):

• These liquids are applied to milled but not yet sintered zirconium oxide restorations. Because the material is porous, the dye penetrates deep into the structure rather than remaining on the surface.

Characteristics:

• Sky color (blue) – translucency and opalescence;
• Berry color – purple edge effects;
• Storm color (gray) – depth and brightness control;
• Hazel color (nut) – warm brown, furrows;
• Sunset color (orange) – intense occlusive/cervical effects;
• Snow color (white) – demineralization effects, white spots;
• Opaque - masking the Ti-Base from the inside of the filling.

Advantages:

• individualization: although IPS e.max Zirconia discs already have a built-in gradient (GTx technology), Color Liquids allow you to "color" places that require special attention (e.g. a very dark tooth pillar);
• color depth: because the dye is inside the structure, the restoration looks natural even with little space for ceramic characterization (Ceram Art);
• without affecting strength: Ivoclar has developed them so that they do not weaken the structure of the zirconium and do not affect its stability during shrinkage in the furnace.

Effect Liquids are special purpose liquids designed to reproduce natural details:

• mamelon effect;
• intensification of color in the neck area;
• highlighting the halo effect on the incisal edge;
• characterization of grooves on occlusal surfaces;
• The unique “Opaque” fluid has been specially formulated to mask the Ti-Base from the inside of the filling while maintaining the natural light dynamics on the outside.

Packaging:

• 1 pc./15ml

Ivotion Base Print 3D printing resin for denture plates 1000ml

Aesthetic base material for 3D printed prostheses, enabling efficient production of prostheses in proven PMMA quality.

Ivotion Base Print is the first 3D printing material for permanent applications from Ivoclar (material quality meets the requirements of the EN ISO 20795-1 standard.)

Drawing on Ivoclar's extensive experience in materials, Ivotion Base Print provides high-quality, durable and aesthetic denture bases with exceptional wearing comfort and high accuracy of fit.

Characteristics:

• Ivotion Base Print is available in three shades, allowing you to create individual dentures with a natural look;
• the material is characterized by a low tendency to plaque formation and discoloration.
• Ivotion Base Print can be used in the PrograPrint system and other approved printing systems within the approved process: Ivoclar: PrograPrint PR5, Asiga: Max, Max 2, MAX X, Ultra, Pro 4K, Pro 4K XL.

Packaging:

• 1000ml

Keystone KeyMill HI Denture Acrylic Disc 98x25mm

Acrylic discs for denture bases (Denture Base Disc).

KeyMill discs combine the well-known Diamond D material formula with an innovative denture milling process.

This solution allows you to enjoy the convenience, speed and savings of CAD/CAM technology, without compromising the aesthetics and durability known from the Diamond D line.

Shades:

• Original: classic, most universal pink;
• Light Reddish Pink: a light shade with more pronounced red tones (imitation of vascularity).

Characteristics:

• exceptional durability: the finished product is characterized by excellent bending resistance and high resistance to cracking upon impact.
• natural aesthetics: the material provides an appearance very similar to natural gum tissue;
• patient comfort: precision milling combined with high-quality acrylic guarantees a perfect fit;
• production efficiency: optimization of working time thanks to the speed of the milling process while maintaining the highest quality standards;
• CE certified, Health Canada approved and 510(k) certified.

Packaging:

• 1 pc.

Keystone KeyMill HI Denture Acrylic Disc 98x30mm

Acrylic discs for denture bases (Denture Base Disc).

KeyMill discs combine the well-known Diamond D material formula with an innovative denture milling process.

This solution allows you to enjoy the convenience, speed and savings of CAD/CAM technology, without compromising the aesthetics and durability known from the Diamond D line.

Shades:

• Original: classic, most universal pink;
• Light Reddish Pink: a light shade with more pronounced red tones (imitation of vascularity).

Characteristics:

• exceptional durability: the finished product is characterized by excellent bending resistance and high resistance to cracking upon impact.
• natural aesthetics: the material provides an appearance very similar to natural gum tissue;
• patient comfort: precision milling combined with high-quality acrylic guarantees a perfect fit;
• production efficiency: optimization of working time thanks to the speed of the milling process while maintaining the highest quality standards;
• CE certified, Health Canada approved and 510(k) certified.

Packaging:

• 1 pc.

Mestra MICROWAVES II zirconium sintering furnace

A modern microwave sintering furnace for zirconium. MICROWAVES II version.

An oven using the latest technological advances in microwave heating.

This solution offers key advantages over conventional sintering furnaces:

• total sintering time: approx. 4 hours;
• heating time to 1550 ºC: 110 min;
• cooling to 300 ºC: 130 min.

Unlike conventional devices—in which heat penetrates from the outside into the structure—in a microwave oven, heat is generated simultaneously at all points within the material. This results in a much more even temperature distribution. The resulting sintered structure is cleaner, more durable, and more precise because there are no thermal "drafts" during heating.

Zirconia is a material with very high thermal resistance. In a traditional furnace, heating must occur very slowly, with numerous stabilization stages, to ensure the heat reaches the interior of the prosthesis. This causes long sintering cycles.

Key benefits:

• efficiency: the fastest program takes about 4 hours (110 min of heating + 130 min of cooling), which shortens the time compared to conventional ovens;
• economy and maintenance: lower power, fewer components and compact size translate into low maintenance costs, the furnace does not require delicate and expensive molybdenum disilicide heating elements;
• very low energy consumption: power consumption is only 800-1100 W during a full cycle;
• greater productivity: the ability to carry out several production cycles in one day, which significantly increases the efficiency of the workshop;
• ease of use: the device is extremely simple in everyday use;
• compact dimensions: the furnace is much smaller than standard devices – it will fit in any laboratory;
• ready to work: the stove is delivered with all necessary accessories for immediate start-up;
• comfort of work: the device practically does not release heat into the environment, which is extremely important in summer in closed rooms.

Technical data:

• dimensions (width x depth x height): 385 x 440 x 547 mm;
• weight: 31 kg;
• supply voltage: AC 230 V, 50 Hz;
• protection (fuse): 15 A;
• maximum power: 2000 W;
• maximum temperature: 1550 ºC.

Packaging:

• 1 pc.

PioCreat Pionext Mini 3D Printer

PioCreat Pionext Mini 3D Printer – an ultra-compact dental solution

The PioNext Mini is an advanced all-in-one dental 3D printer designed for chairside operation – directly at the patient's chair. The device combines a 9K LCD fast printing module and an integrated curing chamber in a single, minimalist housing. Supporting two wavelengths (385 nm and 405 nm), a heated chamber, and an open material system, it enables the rapid production of temporary crowns, implant templates, and diagnostic models in just a few minutes.

Comprehensive implementation and expert support

Purchasing a printer is just the beginning. At Mikran, we prioritize quality work, which is why the implementation and configuration process is led by dental engineer Patryk Baszuk, who ensures:

• Individual configuration: selection of the best resins tailored to the specifics of your work.
• Individual print profiles: precise settings guaranteeing high job passability.
• After-sales training: practical implementation to help you start printing confidently and efficiently.
• After-sales support: ongoing care and the ability to add new print profiles.

Key features of the device

• 2-in-1 system (Print + Cure): save space and budget – cure models directly in the printer.
• 9K precision: matrix resolution providing XY axis accuracy of 14×19 μm.
• Dual wavelength (385 nm / 405 nm): full compatibility with leading dental resins (including NextDent, Detax, Keystone).
• Speed of work: printing a temporary/long-term crown in just 10 minutes.
• Heated chamber: maintains temperature up to 35°C, ensuring printing stability even with thick resins.
• Leveling-free design: factory-calibrated platform reduces the need for manual operation.
• Durability: The amber screen provides twice the lifespan of standard LCD matrices.

Technical data

• Print technology: LCD (Monochrome Amber Screen)
• Screen resolution: 9K (8520 × 4320 px)
• XY axis accuracy: 14 × 19 μm
• Working area: 80 × 70 × 80 mm
• Print speed: up to 60 mm/h
• Wavelength: 385 nm / 405 nm
• Dimensions: 200 × 170 × 241 mm
• Weight: 4.86 kg

Packaging :

• 1 pc PioNext Mini 3D Printer
• 2 pcs Dedicated resin tank (Resin Vat with ACF foil)

Renfert Polish Paste 3D-printed materials diamond paste 13g Promotion

Specialized extraoral polishing paste, designed to give a high gloss to restorations made using 3D printing technology (from resins or filaments).

Renfert catalog number 5104000

Characteristics:

• instant results: quick polishing results thanks to special components precisely adapted to the properties of PMMA and PETG materials;
• time saving: allows you to achieve optimal, mirror shine in a short time;
• patient comfort: perfectly smooth surface ensures high comfort of wearing the restoration and limits the accumulation of dental plaque.

Packaging:

• 1 pc.

Renfert Sand Prebonder surface pro 50µm 2kg

Prebonder surface pro, an abrasive agent for preparing the surface of the restoration before final cementation.

Renfert catalog number: 15970050

Characteristics:

• Clinical preparation of the restoration surface through precise sandblasting ensures a reliable final connection for works made of zirconium oxide, metal alloys, hybrid materials and modern polymers.
• Aluminum oxide (Al2​O3​) with a size of 50 μm, characterized by a precisely defined grain size distribution, particle shape, hardness and purity, creates – in combination with the Basic prebonder device and appropriately selected parameters – ideal micromechanical retention for obtaining permanent bonds.

Advantages:

• Scientifically proven: optimized through extensive in-vitro testing to achieve maximum bond strength during final deposition;
• reproducible results: precisely defined grain geometry, material hardness and cleanliness guarantee consistently high quality of the processed surface;
• Gentle on materials: targeted surface modification ensures perfect retention without aggressive processing and the risk of loss of flexural strength.

Technical specifications:

• application: preparation of the surfaces of permanent prosthetic restorations before final cementation;
• materials: zirconium oxide, metal alloys, hybrid materials, modern polymers;
• Compatibility: only for the special tank of the Basic prebonder device;
• optimal operating pressure: 0.6–1.0 bar (recommended: 0.8 bar);
• grain size: 50 μm Al2​O3​;
• purity: > 99.7% alumina;
• package contents: 4 × 500 g in hermetically sealed units.

Packaging:

• 4x500g

Renfert Silent XS Mobile Extractor Promotion

SILENT XS is a fully mobile suction unit designed for dental offices and prosthetic laboratories.

Captures dust with high suction power directly at the source, e.g. when processing temporary fillings, splints or dentures.

This compact device is wireless and battery-powered, so you can easily move it between different locations.

Thanks to its quiet operation, it is the ideal solution for efficient and clean work, even during mobile use.

SILENT XS is also ideal for use, for example, in the process of embedding works made using CAD/CAM technology.

• After milling fillings from blocks or blanks, minor corrections are usually necessary using a micromotor, a mobile suction unit prevents sanding dust from materials such as zirconium oxide or PMMA from contaminating the air and settling on sensitive equipment, furniture or the floor.

Renfert catalog number 29220000

Characteristics:

• flexible – wireless and battery-powered for maximum freedom of movement;
• simple – one-handed operation and LED lighting for optimal visibility of the workpiece;
• clean – clean working air and effective protection against dust thanks to the H13/HEPA filter with a 99.99% absorption efficiency, bagless.

Technical Data:

• weight (without battery) - 1.12 kg;
• output voltage - 12V;
• battery (not included) - 8 x AA (NiMH batteries) Note: Do not use Li-Ion batteries!;
• dimensions (width x height x depth) (including cover) - 223 x 248 x 193 mm;
• permissible mains voltage - 100 - 240 V;
• permissible mains frequency - 50 - 60 Hz;\
• power consumption - 1.8 A;
• volume flow (max) - 510 l/min;
• filtering technology - fine filter;
• filter quality - HEPA / H13;
• sound pressure level (LpA) (at max. volume flow) - 52.7 dB(A).

Packaging:

• 1 pc.

Renfert-Polish 3D-printed materials starter kit Polishing kit for 3D-printed materials

A starter kit for developing 3D printed materials.

Renfert catalog number 5104100

Specially composed starter kit with Renfert Polish diamond polishing paste for 3D printed materials.

It contains polishing paste (13g) and appropriate brushes and rubbers, perfectly matched to specific applications. This ensures flawless polishing results for restorations printed with PMMA and PETG filaments, as well as crowns and bridges made of resin.

Set contents:

• 1 pc. Renfert Polish polishing paste for 3D printed materials, 13 g (no. 5104000);
• 1 pc. 3D side (wheel) 26 mm purple polishing wheel (no. 870000) for pre-polishing side surfaces;
• 1 pc. 3D top 17 mm: spiral eraser (no. 880000) for pre-polishing occlusal surfaces;
• 1 pc. Bison polishing brush 18 mm (no. 7661000) for high-gloss polishing;
• 1 pc. leather brush (chamois) 22 mm (no. 2081000) effective high-gloss polishing thanks to the highest quality leather;
• 1 pc. cotton brush 22 mm (no. 2051000) for high-gloss polishing.

Packaging:

• 1 set

Runyes - iGrapher G6 Photogrammetric Camera

Runyes iGrapher G6 - The new standard of precision in full-arch implant prosthetics.

Photogrammetric camera for digital implant prosthetics

Runyes iGrapher G6 is an advanced photogrammetric camera designed to precisely map the position of implants in implant prosthetics, especially in full-arch cases in edentulous patients.

The device enables quick, non-contact and extremely accurate acquisition of implantological data, which constitutes an ideal basis for designing passive prosthetic works in a CAD/CAM environment.

Most important use:

• The iGrapher G6 digitally transfers the position, axes, and relationships of implants from the patient's mouth to the prosthetic software. Photogrammetry enables the fabrication of bridges, bars, and full-arch structures with the highest precision and passive seating.

Why iGrapher G6 Photogrammetry?:

• maximum accuracy of implants position measurement accuracy: 20–30 μm;
• angular accuracy: < 1°;
• ideal data for screwed structures.

Photogrammetry eliminates errors typical of impressions and intraoral scanning in full arches, ensuring perfect alignment of suprastructures.

Characteristics:

• full arc in 20 seconds;
• quick scan of the entire arch;
• automatic data alignment;
• intelligent implant recognition;
• shorter working time, greater predictability and higher patient comfort;
• non-contact scanning – patient comfort;
• no impression materials;
• no gag reflex;
• shortened visit time;

The perfect solution for toothless patients and clinics focused on modern digital treatment.

Simple and effective workflow

Mount → Scan → Export STL

• quick implementation;
• ready-made STL files without additional processing.

Full CAD/CAM compatibility:

• cooperation with Exocad and 3Shape;
• compatibility with all major implant systems;
• integration with popular intraoral scanners.

Clinical benefits:

• passive placement of prosthetic works;
• fewer corrections and follow-up visits;
• greater durability of implants and suprastructures;
• saving time for the doctor and technician;
• higher patient satisfaction.

Technical specifications:

• technology: implant photogrammetry;
• position accuracy: 20–30 μm;
• angular accuracy: < 1°;
• full arc scan time: ~20 s;
• weight: 1.3 kg;
• battery: 2500 mAh (up to 3 hours of operation);
• data export: STL;
• Compatibility: Exocad / 3Shape.

Packaging:

• 1 pc.

Runyes 3DS V6 Wireless Intraoral Scanner - New

The Runyes 3DS V6 is an innovative wireless intraoral scanner that sets new standards in digital dentistry. It combines exceptional precision, speed, and ease of use, offering clinicians an ideal tool for improving service quality and streamlining workflow.

Thanks to its lightweight, slim design and quiet operation, the Runyes V6 scanner perfectly meets the needs of modern dental offices.

Runyes 3DS V6 is a combination of the latest technologies, ergonomics and reliability – a tool created with modern digital dentistry in mind.

Key advantages:

• Wireless and wired operation – the scanner operates in wireless mode, but the set also includes a cable that allows it to work like a traditional wired scanner.
• Long battery life – the set includes 2 batteries that provide up to 2 hours of continuous operation each, ensuring comfortable use throughout the day.
• Lightweight and ergonomic design – weighing only 210 g; comfortable grip and slim head make it easy to scan hard-to-reach areas.
• Quiet operation – low noise level increases patient and staff comfort.
• Speed and precision – high accuracy (up to 10 μm) and fast 3D data acquisition shorten work time and increase efficiency.
• Expanded field of view – more data in one scan means fewer repetitions and a faster visit.
• Modern features – including a gesture sensor (touchless operation), orthodontic simulation, intelligent scanbody adjustment, and metal scanning capability.
• Security and convenience – cloud case sharing, oral health report generation, and full compatibility with PLY, STL, and OBJ formats.
• Anti-fogging system – built-in fan ensures uninterrupted and clear visualization.
• Motion gesture sensor – moving the scanner rotates the scan on the computer monitor

Technical specifications:

• Scanner dimensions: 245 × 41 × 57 mm;
• Weight: 210 g;
• Accuracy: up to 10 µm;
• Depth of view: 0-25 mm;
• Frames per second: 20 fps;
• Field of view: 16 × 14 mm;
• Imaging method: continuous 3D video capture;
• Light source: LED;
• True Color: yes;
• Output format: PLY, STL, OBJ;

Packaging:

• 1 pc.

Runyes Digital Tooth Color Detector

Runyes - Digital Tooth Color Detector

Perfectly matched color at your fingertips.

The first surface color detector based on spectrophotometric technology.

It uses multiple algorithms to reflect true color accuracy.

Designed to read colors according to the VITA Classic and Vita 3D Master shade guides.

The most important advantages:

• High Accuracy - The design incorporates a custom optical filter inside the device. Single-point color measurement is complemented by additional surface coverage, allowing for the recognition of a wide range of color information and effectively eliminating errors for improved accuracy.

• Unaffected by external factors - Advanced technology eliminates the need for special lighting conditions and ensures accurate color readings in a variety of environments. No need to adjust conditions; color sampling can be performed anywhere with a single click.

• Lightweight Design - The device weighs about as much as a smartphone. Its ergonomic design allows you to sample colors for extended periods without fatigue.

• Ultra-long battery life - Intelligent operating mode allows you to perform up to 5,000 measurements on a single charge.
• Simple interface – easy to use and easy to read data on the device.

Seven fiber optic probes provide:

• Greater Efficiency - Unlike spot color meters on the market, surface color meters eliminate the need for repeated sampling. This makes the process faster, simpler, and more convenient.
• Better Accuracy - Because tooth surfaces are complex, spot color meters often pick up random shades, leading to errors. Surface color meters scan the entire tooth surface, collecting more color information and effectively eliminating errors—guaranteeing the highest precision.
• More Stable Results - Surface color meters use multiple fiber-optic probes that cross-check data. Advanced algorithms that compare the results from different probes ensure exceptionally stable and reliable measurement results.

Technical specifications:

• Battery type: Built-in lithium-ion battery;
• Battery voltage: Fully charged at 4.2V;
• Battery capacity: 1500mAh;
• Charging port: TYPE-C;
• Charging voltage: DC-5V;
• Charging current: 1A;
• Number of measurements on a single charge: More than 5000 times.

Packaging:

• 1 pc.

Small transport box with sponge 3.5x3.5x2cm with your logo 1000 pieces

Transport boxes with sponge with your logo.

Dimensions:

• length 3.5 cm;
• width 3.5 cm;
• height 2cm.

Available colors to choose from:

• green, blue, lilac, white, yellow, black.

How to order?

• 1/ Add the product to your cart and pay for the order.
• 2/ Send us in response to your order confirmation (or to mikran@mikran.com):
  • selected color (e.g. white, black...)
  • your logo in vector curves (AI, EPS, PDF, SVG, CDR)
• 3/ Within a few days, we will prepare a visualization for you and send it for your approval.
• 4/ After receiving your approval, we will forward your order for processing.
• 5/ We will deliver the boxes with your logo to you within 6-8 weeks.

Packaging:

• 1000pcs.

Tizian Blank Flex Pink 98x20mm polyamide discs for temporary dentures, as an alternative to cast metal frameworks

Tizian Blank Flex Pink – pink medical polyamide, used for the production of temporary prostheses.

This material is characterized by flexibility after milling – similar to Deflex – and works particularly well in combination with Bredent's Qu-Resin Automix adhesive for attaching teeth to the denture base.

Main features:

• made of medical polyamide without plasticizers and PMMA;
• color: pink K (according to the Futura color palette);
• can be milled dry and wet;
• is not thermoplastic – retains its properties at higher temperatures;
• more durable and long-lasting than PMMA.

Indications:

• ideal for temporary dentures, as an alternative to cast metal frameworks.

Technical data:

• density: 1.0–1.2 g/cm³;
• bending strength: 60 MPa;
• water absorption: 40 µg/mm³;
• modulus of elasticity: 1350 MPa.

Packaging:

• 1 pc.

Tizian Blank Flex Pink 98x25mm polyamide discs for temporary dentures, as an alternative to cast metal frameworks

Tizian Blank Flex Pink – pink medical polyamide, used for the production of temporary prostheses.

This material is characterized by flexibility after milling – similar to Deflex – and works particularly well in combination with Bredent's Qu-Resin Automix adhesive for attaching teeth to the denture base.

Main features:

• made of medical polyamide without plasticizers and PMMA;
• color: pink K (according to the Futura color palette);
• can be milled dry and wet;
• is not thermoplastic – retains its properties at higher temperatures;
• more durable and long-lasting than PMMA.

Indications:

• ideal for temporary dentures, as an alternative to cast metal frameworks.

Technical data:

• density: 1.0–1.2 g/cm³;
• bending strength: 60 MPa;
• water absorption: 40 µg/mm³;
• modulus of elasticity: 1350 MPa.

Packaging:

• 1 pc.

Up3D Iron Core i5 PRO Metal Milling Machine - NEW!!!

The IRON CORE i5 PRO from Up3D is an advanced milling device that redefines the standards of stability and precision in digital prosthetics.

Milling machine available with UPCAM software optimized for advanced implant prosthetic work.

Advantages of using a monolithic body made of cast iron:

• guarantees high thermal stability: minimizes the impact of ambient temperature changes on the milling geometry;
• effectively dampens resonance: the device's own weight absorbs vibrations generated during roughing, which directly translates into a longer service life of tools (milling cutters);
• ensures repeatability: the rigid structure eliminates micro-deformations, which is essential when milling complex implant works.

Precision in a 5-axis System.

The device operates in a 5-axis (simultaneous) system, which allows for complete freedom in designing works with deep undercuts and complex step lines.

Advantages:

• the device supports the full spectrum of prosthetic materials, with particular emphasis on metals;
• 2.5 kW spindle: provides a large torque reserve, the machine does not slow down in the event of sudden load changes (e.g. tool entering solid titanium material);
• liquid cooling: active coolant circulation stabilizes the operating temperature, eliminating the thermal expansion error of the spindle;
• Clean machining: stable speed under load translates into lower surface roughness and longer cutter life.

Material application:

• metals: Titanium (Grade 5);
• ceramics and composites: zirconia, hybrid ceramics;
• polymers: PEEK, PMMA, G-CAM, wax.

Material specifications:

• blocks: max. 40 x 20 x 20 mm;
• discs: diameter 98.5 mm, thickness 10–30 mm.

Indications:

• anatomical crowns, anatomical bridges, screw-retained crowns, inlays, onlays, veneers, individual abutments, bars, angled abutments, implant-supported structures and others

Technical Specifications:

• number of axes: 5 simultaneous axes;
• Rotary axes (A/B): Axis A: ±360°; Axis B: ±30°;
• body construction: monolithic cast iron (Iron Core);
• Lighting: LED lighting inside the working chamber;
• spindle power: 2.5 kW;
• total power: 5.5 kW;
• spindle cooling system: liquid (Liquid-cooled);
• milling method: dry and wet;
• tool magazine: automatic (up to 18 positions);
• positioning accuracy: < 0.01 mm;
• maximum spindle speed: 60,000 rpm;
• tool holder: Φ 6.0 mm;

Connection requirements:

• voltage: 220VAC 50～60Hz;
• compressed air: 0.6–0.9 MPa; 80 l/min;
• data: Wi-Fi, USB, Ethernet port.

Dimensions and weight:

• dimensions (W/D/H): 660 x 680 x 1750 (mm);
• weight: 480 kg.

SALES INFORMATION/CONTACT:

• Mikran.pl ul. Wojskowa 3/L4 60-792 Poznań mikran@mikran.com, www.mikran.pl possibility of a free demonstration of the milling machine in your workshop/office.
• Call us: +48 600 128 010 or +48 530 596 166

Scope of delivery:

• Milling machine with CAM software: UPCAM

Up3D P42 Plus Wet Milling Machine

The UP3D P42 Plus is an advanced, 4-axis wet-milling dental milling machine designed for dental offices (chairside) and prosthetic laboratories (labside).

This device specializes in the precise processing of materials such as glass ceramics, composites and titanium (pre-milled) connectors.

Specification of milling materials:

• materials: glass ceramics, titanium, composites, PMMA; - blocks with dimensions up to 40×20×20 mm;

Indications (production possibilities):

• full crowns;
• full contour bridges;
• screw-on crowns;
• inlay / onlay – crown inlays and onlays;
• veneers;
• individual abutments – personalized implant abutments.

Key Features and Functions

• milling with clean water: the device does not require the use of specialized coolants or chemical additives, which reduces operating costs and facilitates cleaning and waste disposal;
• No compressor (Air-Free Technology): This is the biggest innovation of this model. Instead of pneumatic actuators, the device uses precise servo motors and electrical systems. Simply connect the milling machine to the power supply;
• advanced processing (Undercut Removal): thanks to the movable A axis in the range of ±20∘ and UPCAM software, the milling machine precisely removes undercuts, ideal for veneers (even ultra-thin ones up to 0.2 mm), crowns, inlays (inlay/onlay), 3-unit bridges and individual abutments;
• performance and materials: P42 Plus allows for the simultaneous attachment of 3 glass-ceramic blocks or 1 titanium abutment (pre-milled);
• supported materials: glass ceramics (e.g. e.max), composites, PMMA, titanium.

**Other important features:

• remote monitoring: with the MillMind app you can track work progress and tool status on your smartphone;
• Automatic calibration: One-button calibration system ensures repeatable accuracy without manual adjustments;
• double veneer placement: the software allows for optimal placement of two veneers on one block, which reduces material waste.

Technical Specifications:

• number of axles: 4 axles;
• cooling method: pure water (no coolant);
• air supply: none (no compressor required);
• spindle speed: 60000 rpm;
• drill chuck: Ф4.0 mm;
• tool change; automatic (6 positions);
• computer: built-in (touch screen);
• dimensions: 564×402×564 mm;
• weight: 80 kg;
• voltage: AC 100V-240V, 50~60Hz;
• connectivity: Wi-Fi, Ethernet, USB;
• lighting: LED lighting inside the working chamber.

SALES INFORMATION/CONTACT:

• Possibility of a free demonstration of the milling machine in your workshop/office.

• Call us: +48 600 128 010 or +48 530 596 166

Packaging:

• P42 plus milling machine with CAM/UPCAM software

Up3D Up560HD Prosthetic Scanner

UP560HD – Redefining precision in model scanning.

Super promotion for the EXOCAD version:

• EXOCAD design software for 50% + free Virtual Articulator module!:

Schedule a free presentation at your studio/office:

• Dental technician Damian Dunajewski Consultant/CAD/CAM Specialist Tel. +48 600 128 010 damian.dunajewski@mikran.com

• Dental technician Kamil Wolniewicz Consultant/CAD/CAM Specialist Tel. 530 596 166 kamil.wolniewicz@mikran.com

The scanner can be purchased in 3 configurations:

• only with scanning software;
• with EXOCAD scanning software and design software for 50% + Virtual Articulator module + Exocad Basic Training for free!;
• with scanning software and UPCAD design software.

The UP560HD is an improved version of the world's best-selling scanner for non-split models from UP3D.

The device combines a modern, elegant design with uncompromising performance, making it a key tool for modern prosthetic laboratories.

Advantages:

• ultra-high precision: thanks to the accuracy of ≤ 4 μm, the scanner guarantees the highest quality of detail reproduction;
• advanced optical system: equipped with two 5.0 MP cameras that provide high-resolution (HD) imaging, it is an ideal solution for precise imaging of crown margins and interdental spaces;
• speed of work: the "Superfast Scanning" function allows you to scan a single arc in just 10 seconds;
• intelligent AI support: the scanner uses artificial intelligence algorithms and enables precise scanning of abutments with a thin layer of scanning paper;
• versatility: the device supports scanning of unsectioned models, implants and color scanning thanks to the use of dedicated blue light.

Technical Specifications:

• accuracy: 4 micrometers;
• camera resolution: 5.0MP×2;
• scanning method: blue light;
• scanning speed; single arc 13s;
• output formats: STL, UM, PLY, OBJ;
• interface: USB 3.0;
• dimensions: 298×304×543 mm;
• weight 10kg;
• texture mode: point cloud coloring;
• construction: open, 2-axis.

COMMERCIAL INFORMATION/CONTACT

• Mikran.pl ul. Wojskowa 3/L4 60-792 Poznań mikran@mikran.com, www.mikran.pl;

• the possibility of a free presentation of the scanner in your workshop/office;

• call us: +48 600 128 010 or +48 530 596 166.

Packaging:

• 1 pc of selected scanner option

Upcera Aevra Multilayer 98x14mm

Aevra is a modern, new-generation zirconia ceramic, developed by Upcera with the highest aesthetics and functionality of prosthetic restorations in mind.

Thanks to the use of innovative powder engineering, this material combines high mechanical strength with natural gradient translucency.

UPD (Uniform Particle Dispersion) technology: Allows to obtain zirconium of high purity and a reduced number of structural defects, which directly translates into better strength and translucency.

Aevra is characterized by a gradient structure that mimics the natural structure of a tooth.

A 5 mm thick transition layer exists between the enamel and dentin. The material's overall translucency ranges from 46% to 50%, and its strength ranges from 800 to 1,050 MPa.

Enamel Layer (5Y-PSZ):

• strength: 800 MPa;
• translucency: 50%;
• layer thickness: 3 mm.

Dentin Layer (4Y-PSZ):

• strength: 1,050 MPa;
• translucency: 46%;
• layer thickness: 4-22 mm.

Aevra material is dedicated to a wide range of prosthetic works:

• inlays, onlays and veneers;
• full-contour crowns and frameworks;
• monolithic bridges and substructures (3-point and multi-point above 4 points);
• implant-supported restorations (single units and full fixed dentures).

Product Specifications:

• Available shades: full range of colours including A1–A4, B1–B4, C1–C4, D2–D4 and bleached colours BL1–BL4.
• available thicknesses: From 12 mm to 30 mm;
• Standard sintering program: The recommended final temperature is 1510°C with a holding time of 120 minutes. The process also includes a holding step at 1200°C for 30 minutes and natural cooling.

Attention:

• Sintering parameters are recommendations and may require adjustment after a test run.

Technical data:

• translucency (1mm, permeability): 46%–50%;
• bending strength: 800–1050 MPa
• Fracture resistance:>4 MPa m¹/²;
• density after sintering: ≈ 6.0 g/cm³;
• chemical solubility after sintering: <100 μg/cm²;
• radioactivity: ≤ 1.0 Bq/g;
• sintering temperature (standard): 1510°C;
• coefficient of thermal expansion (CTE): (10.5 ± 0.5) × 10⁻⁶ K⁻¹ (25–500°C);
• monoclinic phase content after aging: <5%;
• raw material: 4Y-5Y (Yttrium stabilized zirconium oxide).

Chemical composition:

• ZrO2​+HfO2​: 86.3%∼95.5%;
• Y2​O3​ (Yttrium oxide): 7%∼9.7% ;
• Er2​O3​ (Erbium oxide): < 1.0%;
• Fe2​O3​ (Iron oxide): < 0.2%;
• Other oxides: <0.5%

Packaging:

• 1 pc.

Upcera Aevra Multilayer 98x16mm

Aevra is a modern, new-generation zirconia ceramic, developed by Upcera with the highest aesthetics and functionality of prosthetic restorations in mind.

Thanks to the use of innovative powder engineering, this material combines high mechanical strength with natural gradient translucency.

UPD (Uniform Particle Dispersion) technology: Allows to obtain zirconium of high purity and a reduced number of structural defects, which directly translates into better strength and translucency.

Aevra is characterized by a gradient structure that mimics the natural structure of a tooth.

A 5 mm thick transition layer exists between the enamel and dentin. The material's overall translucency ranges from 46% to 50%, and its strength ranges from 800 to 1,050 MPa.

Enamel Layer (5Y-PSZ):

• strength: 800 MPa;
• translucency: 50%;
• layer thickness: 3 mm.

Dentin Layer (4Y-PSZ):

• strength: 1,050 MPa;
• translucency: 46%;
• layer thickness: 4-22 mm.

Aevra material is dedicated to a wide range of prosthetic works:

• inlays, onlays and veneers;
• full-contour crowns and frameworks;
• monolithic bridges and substructures (3-point and multi-point above 4 points);
• implant-supported restorations (single units and full fixed dentures).

Product Specifications:

• Available shades: full range of colours including A1–A4, B1–B4, C1–C4, D2–D4 and bleached colours BL1–BL4.
• available thicknesses: From 12 mm to 30 mm;
• Standard sintering program: The recommended final temperature is 1510°C with a holding time of 120 minutes. The process also includes a holding step at 1200°C for 30 minutes and natural cooling.

Attention:

• Sintering parameters are recommendations and may require adjustment after a test run.

Technical data:

• translucency (1mm, permeability): 46%–50%;
• bending strength: 800–1050 MPa
• Fracture resistance:>4 MPa m¹/²;
• density after sintering: ≈ 6.0 g/cm³;
• chemical solubility after sintering: <100 μg/cm²;
• radioactivity: ≤ 1.0 Bq/g;
• sintering temperature (standard): 1510°C;
• coefficient of thermal expansion (CTE): (10.5 ± 0.5) × 10⁻⁶ K⁻¹ (25–500°C);
• monoclinic phase content after aging: <5%;
• raw material: 4Y-5Y (Yttrium stabilized zirconium oxide).

Chemical composition:

• ZrO2​+HfO2​: 86.3%∼95.5%;
• Y2​O3​ (Yttrium oxide): 7%∼9.7% ;
• Er2​O3​ (Erbium oxide): < 1.0%;
• Fe2​O3​ (Iron oxide): < 0.2%;
• Other oxides: <0.5%

Packaging:

• 1 pc.

Upcera Aevra Multilayer 98x18mm

Aevra is a modern, new-generation zirconia ceramic, developed by Upcera with the highest aesthetics and functionality of prosthetic restorations in mind.

Thanks to the use of innovative powder engineering, this material combines high mechanical strength with natural gradient translucency.

UPD (Uniform Particle Dispersion) technology: Allows to obtain zirconium of high purity and a reduced number of structural defects, which directly translates into better strength and translucency.

Aevra is characterized by a gradient structure that mimics the natural structure of a tooth.

A 5 mm thick transition layer exists between the enamel and dentin. The material's overall translucency ranges from 46% to 50%, and its strength ranges from 800 to 1,050 MPa.

Enamel Layer (5Y-PSZ):

• strength: 800 MPa;
• translucency: 50%;
• layer thickness: 3 mm.

Dentin Layer (4Y-PSZ):

• strength: 1,050 MPa;
• translucency: 46%;
• layer thickness: 4-22 mm.

Aevra material is dedicated to a wide range of prosthetic works:

• inlays, onlays and veneers;
• full-contour crowns and frameworks;
• monolithic bridges and substructures (3-point and multi-point above 4 points);
• implant-supported restorations (single units and full fixed dentures).

Product Specifications:

• Available shades: full range of colours including A1–A4, B1–B4, C1–C4, D2–D4 and bleached colours BL1–BL4.
• available thicknesses: From 12 mm to 30 mm;
• Standard sintering program: The recommended final temperature is 1510°C with a holding time of 120 minutes. The process also includes a holding step at 1200°C for 30 minutes and natural cooling.

Attention:

• Sintering parameters are recommendations and may require adjustment after a test run.

Technical data:

• translucency (1mm, permeability): 46%–50%;
• bending strength: 800–1050 MPa
• Fracture resistance:>4 MPa m¹/²;
• density after sintering: ≈ 6.0 g/cm³;
• chemical solubility after sintering: <100 μg/cm²;
• radioactivity: ≤ 1.0 Bq/g;
• sintering temperature (standard): 1510°C;
• coefficient of thermal expansion (CTE): (10.5 ± 0.5) × 10⁻⁶ K⁻¹ (25–500°C);
• monoclinic phase content after aging: <5%;
• raw material: 4Y-5Y (Yttrium stabilized zirconium oxide).

Chemical composition:

• ZrO2​+HfO2​: 86.3%∼95.5%;
• Y2​O3​ (Yttrium oxide): 7%∼9.7% ;
• Er2​O3​ (Erbium oxide): < 1.0%;
• Fe2​O3​ (Iron oxide): < 0.2%;
• Other oxides: <0.5%

Packaging:

• 1 pc.