ASA Articulator 5050 PLUS

A mid-range non-arcon articulator. Ideal for full dentures.

The 5050PLUS articulator is the most versatile of the Asa Dental articulators.

Offering all the standard features of the 5050, the 5050PLUS has the added advantage of being the only system with a posterior rod with a tilted plate, which guarantees absolute precision even after the incisal guide rod is removed, improving visibility. Posterior adjustment screws ensure that the guides and tilts remain constant during all combinations of lateral, protrusive, and retrusive movements.

Characteristics:

• stable operation within a 60° range for ergonomic comfort;
• ideal for patients with class III congenital defect;
• compatible with all pressure polymerizers available on the market;
• anti-rotation system of the incisal guide;
• full stability and precision when working without an incisal guide thanks to the adjustable rear rod;
• mounting bracket with 4 elliptical guides for lower arch models;
• occlusal table with 4 elliptical guides for upper arch models;
• magnetic incisal guide rod for full stability while the plaster dries;
• support rod for stability when fully opened;
• anti-shock system.

Technical Data:

• intercondylar distance 110 mm;
• condylar inclination constant 30°;
• Bennett angle 0-7°;
• incisal table inclination 0°;
• distance between mounting plates 87 mm;
• 24° tilted contrast table;
• 180° opening.

Packaging:

• articulator, 4 mounting plates 5000-1, 2 locking knobs.

Basic prebonder pen-type prosthetic sandblaster 2 tanks 70-250 µm/50 µm prebonder NEW

Basic prebonder precision sandblaster for the dental office.

The first scientifically validated precision sandblaster designed for clinical surface preparation of prosthetic restorations prior to final cementation.

Renfert catalog number: 29691250

Characteristics:

• process standardization: the device standardizes the pre-treatment of materials such as zirconium oxide, metal alloys, hybrid materials and modern polymers;
• guaranteed permanent bond: reliably prevents errors resulting from insufficient or excessive sandblasting, eliminating the risk of adhesion failures (repairs falling off);
• proven technology: system based on the renowned Renfert Basic quattro IS technology, which guarantees reliability and precision;
• Modularity and ergonomics: flexible tank configuration options and an ergonomic handle make clinical surface preparation in the office simple, fast and repeatable.
• protection of the material structure: thanks to extremely precise sand dosing (safe even for delicate materials).

Technical details:

• precise working distance: the Prebonder control tip allows you to maintain a constant distance from the filling, which always guarantees the same impact force of the sand;
• uniform micro-retention: thanks to the special Prebonder jet nozzle, the sand jet has the shape of a perfect cone, which allows for a perfectly even surface structure;
• bonding reliability: the operating pressure range has been scientifically confirmed to ensure maximum adhesion (gluing) of the restoration to the abutment;
• full control over the process: a precise pressure gauge with a clearly marked working area facilitates quick and error-free setting of parameters;
• stable sand flow: the patented Renfert Venturi mixing chamber ensures that the sand flows smoothly and without interruptions;
• work without delays: the IS (Immediate Stop) system stops sandblasting immediately after releasing the button - without unnecessary "spraying" of sand residues;
• versatility: the modular structure of the tanks allows for quick adaptation of the device to various tasks in the dental office.

Technical Data:

• dimensions (width x height x depth) 2 tanks: 395 x 320 x 510 mm;
• working pressure – precise sandblasting for optimal bonding: 0.6 - 1 bar;
• working pressure – recommended setting: 0.8 bar;
• working pressure – conventional precision sandblasting: 1 - 6 bar;
• Application: precision sandblasting for adhesion purposes (50 µm) and conventional sandblasting (70–250 µm);
• permissible mains voltage: 220 - 240 V;
• permissible mains frequency: 50 - 60 Hz;
• weight with 2 tanks without sand: 11.5 kg;
• connection pressure: 6 - 8 bar;
• air consumption (max): 98 l/min;
• lamp power: 16 W;
• illuminance (max., at a distance of 410 mm): 4.8 lx;
• tank capacity: 1,000 ml;
• number of tanks: 2 - 4;
• sandblasting chamber capacity: 20 l;
• instant stop function: 1;
• silicone coated panel: yes.

Scope of delivery:

• 1 x Prebonder tank: dedicated exclusively to Prebonder surface pro sand with a grain size of 50 µm, includes a special jet nozzle, a spacer pin (control tip);
• additional 2 bar linear pressure reducer, 4 spare spacer pins (control tip);
• 1 test surface for monitoring sandblasting parameters (control pad);
• 1 x classic tank for precision sandblasting 70–250 µm with a 1.2 mm blast nozzle.

Packaging:

• 1 pc.

DENTAL NAVI Volume 1 Zircon Smile - Print publication A4 format

We recommend Dental Navi Volume 1 – "Zircon Smile" – a must-have for every prosthodontist! If you work with zirconium, this book is an absolute must-have. It's not just theory – it's practice and experience, specialists who work with zirconium every day.

Zirconium is currently one of the most popular materials in aesthetic dentistry: durable, aesthetic, biocompatible, ideal for thin, fully ceramic prosthetic works – without the use of metal.

Volume 1 provides a holistic introduction to the process: from patient analysis, through design, to fabrication and cementation.

What can we learn from Volume 1?:

• A detailed overview of the types of zirconia restorations and their physicochemical properties.
• Analysis of characterization techniques, i.e. imparting color, translucency, and finishing methods.
• Practical advice and clinical tips.
• Inspiring photos and real cases.
• Descriptions of their clinical applications, e.g. in crowns, bridges, veneers.
• Possible discussion of CAD/CAM technology and digital workflow in the production of zirconia restorations.

Who is this publication for:

• For dentists, dental technicians, students and those involved in dental prosthetics.

Packaging:

• 1pc.

Detax resin Freeprint denture flex pink-transparent 1000g

MDR-certified, light-cured, biocompatible resin for printing flexible removable partial dentures.

For DLP printers with a wavelength of 385 nm.

Does not contain MMA, THF-MA or TPO.

Class IIa medical device.

Advantages:

• short production time, which eliminates labor-intensive work methods;
• the elastic properties of the material ensure high wearing comfort for the patient;
• precise 3D printing and thin material structure ensure a perfect fit and natural look without metal clasps;
• quick processing and easy polishing.

Physical data:

• tensile strength approx. 45 MPa (DIN EN ISO 527-1);
• tensile elongation > 20% (DIN EN ISO 527-1);
• final hardness 78 on the Shore D scale;
• water absorption < 32 µg/mm³ (DIN EN ISO 20795-1);
• solubility < 1.6 µg/mm³ (DIN EN ISO 20795-1).

Packaging:

• 1 pc.

Dreve Phrozen Sonic CS+ 3D printer

A compact, desktop LCD printer with 22 μm resolution, equipped with an innovative 385 nm LED light source. This ensures high exposure intensity, which translates into exceptionally short printing times.

The high-quality full metal housing and improved cuvette and platform handling make the new generation of Phrozen printers extremely user-friendly and ideal for all dental applications.

2 trays and work platforms:

• standard, dimensions (width x depth x height) 74 x 168 x 185 mm³ - has an oblong shape, it is ideal when you need to print, for example, several dental arches at once or a larger number of models in one cycle;
• mini, dimensions (width x depth x height) 75 x 75 x 185 mm³ - has a square base, is intended for very precise, single works (e.g. one crown or abutment).

Characteristics:

• build platform with optimal adhesive properties (excellent print adhesion);
• comprehensive service and technical support from our experts;
• Dreve ElementS Slicer software with optimized print profiles for best results;
• control and monitoring of processes from a PC.

Technical Specifications:

• dimensions (height x width x depth): 500 x 380 x 360 mm;
• weight: approx. 20 kg;
• supply voltage: 100-240 V / 50-60 Hz, 0.7 A;
• layer thickness (Z axis): 0.01 – 0.30 mm (10 – 300 μm).

Scope of delivery:

• litter boxes and platforms in Standard and Mini versions;
• USB flash drive;
• spatula – an essential tool for safely removing finished prints from the build platform;
• funnel – useful for pouring the resin back into the bottle (e.g. to filter it);
• Dreve ElementS software – a professional slicer dedicated to the preparation of dental models.

Packaging:

• 1 pc.

EcoPrint Model 3D printer for printing models with a starter kit

EcoPrint Model 3D printer for printing models + starter kit

EcoPrint Model: a system for economical printing of prosthetic models thanks to which:

• You can print 6 models in as little as 30 minutes.
• You will achieve printing precision at 16K resolution.
• You will optimize the costs of your business - the cost of printing a model is approximately PLN 6.

The system includes:

• Reconfigured printer - before delivery to your laboratory, each EcoPrint printer is reconfigured to meet the highest quality standards for printers for precision prosthetic models.
• Wash&Cure 3.0 washing and polymerization device - thanks to the use of this device, you will be sure that the printed models will undergo the appropriate post-processing procedure.
• 2 kg of resin for EcoPrint Craftsman DLP models (beige color) - this is the resin we chose due to its unrivaled parameters (accuracy, sharp contours, printing speed).
• Accessories for work - everything you need to print your models immediately after receiving the EcoPrint kit (cuvette, resin strainer, tweezers, masks)
• Free system implementation in your dental practice/office - our consultant is waiting for your call. Implementation will take only 30-45 minutes, helping you avoid failures and ensure excellent results from the very first prints. Patryk Baszuk, MD, will be happy to answer all your questions and help you launch the EcoPrint Model system. patryk.baszuk@mikran.com, tel. +48 798 748 738
• Free after-sales support during the warranty period.
• Post-warranty service.

Advantages of EcoPrint:

• Low price of the system.
• Very low operating costs (approx. PLN 6 per model).
• You will achieve printing precision at 16K resolution.
• Highly reproducible results. Incredibly accurate models.
• Professional implementation and after-sales support.

Packaging:

• EcoPrint Model 3D printer + starter kit.

EnigmaLife+ front teeth 6 pieces - Teeth made to order, waiting time approx. 7 working days

enigmalife+ front teeth are based on exhaustive research of natural teeth.

They are made of a durable PMMA-based copolymer using a double polymerization process.

They come in 16 AD colors and two bleached shades BL2 and BL3.

EnigmaLife is a good choice when you want to provide your patients with the best prosthetics.

The upper front teeth are divided into two types: inspiration and character.

• enigmalife+Inspiration anterior teeth come in a series of three harmonious and realistic shapes: IS for square, IT for triangle, and IR for rectangle. There's even an extra-large IR10 shape available for situations requiring a very large but perfectly shaped tooth.

• The enigmalife+ character anterior tooth range is selected from shapes that have proven to be natural favorites for both denture wearers and the clinical team over time. We designed them to incorporate the aesthetic advancements of the entire enigmalife+ range.

• There are nine enigmalife+ lower forms, offering a wide range of lengths and widths to suit all clinical situations. These include two attractive larger forms, L10 and L11, which are particularly suitable for partial and implant-stabilized dentures.

Characteristics:

• natural anatomical shapes provide an extraordinary, true three-dimensional appearance;
• internal layering recreates the complexity of a natural tooth and provides an incredibly natural look;
• enigmalife+ teeth are exact mirror images on both sides of the mouth;
• greater incisal translucency.
• Like natural teeth, enigmalife+ have a natural opalescent appearance and fluoresce under UV light, making them appear vibrant even in different lighting conditions;
• enigmalife+Inspiration anterior teeth come in a series of three harmonious and realistic shapes: IS for square, IT for triangle, and IR for rectangle. There's even an extra-large IR10 shape available for situations requiring a very large but perfectly shaped tooth.
• The enigmalife+ character anterior tooth range is selected from shapes that have proven over time to be natural favorites for both denture wearers and the clinical team.
• There are 28 different sizes and shapes of upper front teeth and 9 lower front teeth.

Advantages:

• natural opalescence and fluorescence;
• advanced occlusal concept to improve stability and comfort;
• can be set in almost any occlusal arrangement;
• high strength and abrasive properties;
• improved color stability and plaque resistance;
• strong bond with the denture base material.

Packaging:

• 1 flap/6 teeth

EnigmaLife+ teeth sides 8 pieces - Teeth made to order, waiting time approx. 7 working days

The high quality, strength and abrasion properties of enigmalife+ posterior composite teeth are the result of advanced material development and highly advanced computer-controlled manufacturing at every stage of the process.

EnigmaLife S Posterios:

• designed by Professor Rudolph Slavicek;

• Created by the world's leading expert in gnathology, Professor Rudolph Slavicek, they reproduce the form and function of natural teeth;

• The 30-degree inclination of the cusps of the first upper molar is consistent with his detailed studies of the natural dentition;

• designed not only for full dentures, but also for implant-stabilized and partial dentures, where their fuller form allows for easy adjustment to both the underlying implant structures and the remaining teeth;

EnigmaLife P Posterios:

• They are designed for dentures that require more space for the tongue;
• the lower teeth are flatter, while the upper teeth have 23-degree cusp angles, which makes chewing easier;
• whether they are positioned in balanced or lingual occlusion, this series crosses easily;
• lateral displacement and protrusive movements are interference-free and require only minimal case-specific adjustments;
• All forms in this series have longer premolars, which allows for a natural visual transition from the adjacent canines.
• The natural morphological shape, details on the cheek surfaces and vivid layers of color give them life and exceptional vitality.
• With five sizes of molds from the small P1 to the extra large P6, you can make a choice for every clinical situation.

FastForm Deskfab X1 metal printer with accessories

DESKFAB X1 Compact SLM 3D Printer for Metal – Dental All-in-One Segment.

This device represents a new class of desktop metal printers, dedicated to modern prosthetic laboratories.

It combines advanced laser sintering technology (SLM) with unprecedented space savings and simplified operation.

Key Features and Technical Innovations;

Spatial Revolution: All-in-One Design:

• The device was designed to maximize space optimization in the laboratory.
• Dimensions: 600 x 650 x 800 mm.
• Work surface: It takes up only 0.39 m², which allows it to be placed directly on the worktop.

Zero-Cost Operation: Maintenance-Free Filtration System:

• An innovative system that eliminates typical service costs associated with metal printing.
• Lifespan: Up to 30,000 operating hours.
• Maintenance-free: Filtration system that does not require filter replacement.
• Safety: Tool-free installation, eliminating the risk of installation errors.

One-Click Print: AI Process Automation:

• Maximum simplification of the path from scan to finished product.
• Artificial Intelligence Support: The process from scanning to the finished project takes just 5 minutes thanks to AI algorithms.
• Operation: One-click printing, ideal for non-technical staff.

Intuitive Installation (Hassle-Free):

• Mistake-Proof: A system of 4 colored connections (channels) that guarantees correct connection of the device and eliminates the risk of mistakes during installation.

LFPT (Laser Follow Powder) technology:

• A proprietary solution that increases production efficiency.
• Innovation: The laser precisely follows the powder application process.
• Efficiency: Speed up the printing process by 20% compared to standard SLM systems.

This device solves the main challenges of SLM technology in dentistry: high filter maintenance costs and large dimensions. Thanks to LFPT technology and modular cartridges, this printer is an ideal solution for laboratories wishing to produce metal frameworks, frames, and titanium abutments in-house using automated technology.

Technical Data:

• Printer model: DeskFab X;
• Dimensions: 650 mm × 640 mm × 800 mm (W × D × H);
• Weight: 120 kg;
• Build platform size: Ø100×80mm (base plate included);
• Laser spot size: 50-80um;
• Laser power: 300 W;
• Minimum oxygen level: ≤100 ppm;
• Scanning speed: 7m/s;
• Layer thickness: 20-150um;
• Laser Source: Single;
• Laser type: CW continuous wave fiber laser;
• Powder application system: Top feed, unidirectional application;
• Printing accuracy: ±50μm;
• Powder container capacity: 1.6 l;
• Power Failure: Auto Resume;
• Recoater type: Soft Blade Recoater – minimizes the risk of print damage;
• Base plate mounting type: Permanent magnetic;
• Filtration system: Permanent filter ≥30,000 hours;
• Composition mode: Automatic composing and path planning;
• Printing material: CoCr.
• Software system: FastLayer layer merging software and FastFab operating software;
• Cooling type: Water cooled;
• Ambient temperature: 15~28℃;
• Ambient humidity: ≤78%;
• Input power: 220V AC, single phase;
• Average output power: 1 kW;
• Protective gas: Nitrogen (N2),Argon (Ar);

Set of tools and accessories:

• Cleaning kit - 1 pc.
• Silicone scraper (spatula) - 20 pcs.
• Workshop tool set - 1 pc.
• Support removal tools - 1 pc.
• Electric chisels/tools for separating prints from the board - 1 pc.
• Cobalt-chrome alloy work plate (base) - 1 pc.
• Water cooler (active cooling system) - 1 pc.
• Nitrogen generator with oil-free pump (for generating a protective atmosphere) - 1 pc.
• Water vacuum cleaner (specialized vacuum cleaner for safe collection of metal dust) - 1 pc.
• Voltage stabilizer 220V, 5kW (protects printer electronics) - 1 pc.
• Powder sifter with one sieve - 1 pc.
• Powder dryer (oven for drying material before printing) - 1 pc.
• Heat treatment furnace (vacuum-free) - used for stress relief of prints after the SLM process - 1 pc.

Formlabs VarseoSmile TriniQ Resin 750g (Form 4B)

Formlabs BEGO™ VarseoSmile® TriniQ® resin is a versatile, biocompatible ceramic-filled material designed for both temporary and permanent restorations, including single-piece restorations such as crowns, inlays, onlays, veneers, bridges and dentures.

BEGO™ VarseoSmile TriniQ is the first 3D printed resin for fixed bridges, characterized by excellent accuracy, translucency and an efficient process.

Available in three VITA shades:

• A2;
• A3;
• B1.

Printer Compatibility: Form 4B

• compatible with Form 4 resin tank;
• compatible with the Form 4 Flex build platform;
• has a certificate of biocompatibility.

Material properties

• bending strength: 120 MPa;
• flexural modulus: 3600 MPa;
• Shore hardness: ≥ 90 D;
• sorption: < 0.6 µg/mm³;
• Solubility: < 12 µg/mm³;

Packaging:

• 750g.

Note: The current price promotion (discount) is valid only for products available from stock or until April 30, 2026

Forte 200 / H500 prosthetic micromotor "SLIM" version

Saeshin Forte 200 α prosthetic micromotor with H 500 light handpiece.

• Brushless micro motor, knee controller with additional foot pedal.

• High speed control (up to 50,000 rpm) and high power minimize vibration while providing sufficient power even at low speeds.

Characteristics:

• handpiece weight 222g;
• handpiece size 170.5 x Φ29mm;
• knee type;
• ergonomic;
• excellent durability;
• minimal noise and vibration;
• maximum efficiency;
• built-in microprocessor (self-diagnosis, error signaling, working memory storage functions and automatic handpiece recognition);
• right/left rotation of the micromotor;
• 50000 rpm;
• max. torque: 7.8N.cm;
• power 230W;
• 12-month warranty.

Packaging:

• 1 pc.

Hyramic Upcera ML disc 98x16 mm 1 piece

Hybrid ceramics with a double structure of ceramics from 55% to 85% and polymer material from 13% to 43%.

Adhesive cementation.

ML translucency level.

Characteristics:

• compatible with technical CAD/CAM systems and office machines;
• available in Multilayer (polychromatic) version;
• biocompatible;
• Class IIa medical product.

Application:

• thin veneers;
• veneers;
• inlay;
• onlay;
• crowns.

Physical data:

• bending strength > 180 MPa;
• hardness 1000-1200 MPa;
• water absorption < 25 µg/mm³;
• water solubility < 2 µg/mm³.

Packaging:

• 1 pc.

Hyramic Upcera ML disc 98x20mm 1 piece

Hybrid ceramics with a double structure of ceramics from 55% to 85% and polymer material from 13% to 43%.

Adhesive cementation.

ML translucency level.

Characteristics:

• compatible with technical CAD/CAM systems and office machines;
• available in Multilayer (polychromatic) version;
• biocompatible;
• Class IIa medical product.

Application:

• thin veneers;
• veneers;
• inlay;
• onlay;
• crowns.

Physical data:

• bending strength > 180 MPa;
• hardness 1000-1200 MPa;
• water absorption < 25 µg/mm³;
• water solubility < 2 µg/mm³.

Packaging:

• 1 pc.

Intraoral scanner console - universal

A compact and elegant console designed for seamless touchscreen integration.

Characteristics:

• adjustable computer compartment (thanks to a simple adjustment mechanism, you can change the width of the compartment from 20 cm to 29 cm, ensuring a perfect fit for any computer);
• durable, adjustable aluminum scanner holder;
• designed specifically for touch screens;
• adjustable monitor arm with tilt and forward-pull function for easy use of the touchscreen.

Technical specifications:

• the dimensions of the 3DDS housing are 52 cm (W) x 36 cm (D) x 60 cm (H) (plus an additional 66 cm for the holder and monitor);
• the dimensions of the computer compartment are from 20 cm (width) to 28 cm (depth) x 50 cm (depth) x 50 cm (height);
• made of lightweight aluminum, 3mm thick;
• weight 15kg;
• adjustable monitor arm with tilt and forward-pull function for easy touchscreen operation, supports 100 x 100 mm and 75 x 75 mm formats;
• 75 mm diameter wheels with the possibility of 360 degrees rotation, made of special polyamide rubber, ensure smooth mobility;
• The front wheels have a locking mechanism that allows you to lock both rotation and movement, providing additional stability and control.

Packaging:

• 1 pc.

IP Clean 4D PRO steam generator

The high-end IP Clean 4D PRO steam cleaner was specifically designed to meet the demanding requirements of modern dental technology. Thanks to its advanced technology and robust design, it sets new standards in performance. With four powerful functions and intelligent automation, it is the ideal solution for both traditional applications and digital production processes such as 3D printing.

Unlimited and autonomous operation thanks to the direct water supply with automatic filling. Integrated water sensors and an automatic filling pump automatically refill the stainless steel boiler with water, regardless of the mains pressure, facilitating uninterrupted daily operation. For greater comfort, the use of water softeners, such as the compatible IP Clean Filter water softener, is recommended due to its constant contact with tap water.

4 cleaning modes provide maximum flexibility and time savings:

• Saturated steam (4–5 bar): High-temperature dry steam removes even the most stubborn dirt, grease, and oil residues without the use of chemicals. Ideal for hygienic applications and delicate materials.
• Wet steam (4-5 bar): Wet steam with high cleaning power effectively removes dirt and makes it easier to wipe away residue. Especially suitable for areas requiring thorough cleaning, such as easily removing wax residue.
• Cold steam (6–8 bar): This intelligent function enables gentle yet effective cleaning of delicate surfaces. Particularly suitable for heat-sensitive and easily deformed materials. Dirt and residue can be removed without damaging the workpiece. This function can also be used to stabilize and cool the surface temperature of materials during steam operation.
• Compressed air (6–8 bar): Powerful compressed air for dust removal and drying of workpieces.

Characteristics:

• automatic filling via permanent water connection;
• continuous operation without interruption;
• integrated water softening filter;
• durable materials: stainless steel housing and boiler;
• external heating system: extremely durable and well-protected heating element.

Technical data:

• boiler capacity: 5l;
• max. working pressure: 5bar;
• power: 1500 W;
• voltage: 230 V / 50 Hz;
• dimensions (length x width x height): 250x380x330mm;
• weight: approx. 15 kg; -water connection: G ¾";
• connection pressure: 1 - 5 bar.

Packaging:

• 1 pc.

IP Clean 4D steam generator

The revolutionary 4-in-1 steam generator ensures maximum efficiency in your studio.

The high-end IP Clean 4D steam cleaner was specifically designed to meet the demanding requirements of modern dental technology. Its advanced technology and robust design set new standards in performance. With four advanced features and intelligent automation, it is the ideal solution for both traditional applications and digital production processes such as 3D printing.

Unlimited, autonomous operation thanks to the integrated water pump and level sensors, with automatic filling via an external tank, simplifies daily operation without interruption. An integrated and easily replaceable softener filter with a capacity of 25-60 liters (depending on water hardness) allows the device to be safely filled with tap water or, optionally, distilled water.

4 cleaning modes provide maximum flexibility and time savings:

• Saturated steam (4–5 bar): High-temperature, dry steam removes even the most stubborn dirt, grease, and oil residues without the use of chemicals. Ideal for hygienic applications and delicate materials.
• Wet steam (4-5 bar): Wet steam with high cleaning power effectively removes dirt and makes it easier to wipe away residue. Especially suitable for areas requiring thorough cleaning, such as easily removing wax residue.
• Cold steam (6–8 bar): This intelligent function enables gentle yet effective cleaning of delicate surfaces. Particularly suitable for heat-sensitive and easily deformed materials. Dirt and residue can be removed without damaging the workpiece. This function can also be used to stabilize and cool the surface temperature of materials during steam operation.
• Compressed air (6–8 bar): Powerful compressed air for dust removal and drying of workpieces.

Characteristics:

• automatic filling from an external 5-liter tank;
• constant readiness to work without interruptions;
• integrated water softening filter;
• durable materials: stainless steel housing and boiler;
• external heating system: extremely durable and well-protected heating element.

Technical data:

• boiler capacity: 5l;
• external tank capacity: 5l;
• max. working pressure: 5bar;
• compressed air connection: 6-10 bar;
• power: 1500 W;
• voltage: 230 V / 50 Hz;
• dimensions (length x width x height): 250x380x330mm;
• weight: approx. 15 kg;

Packaging:

• 1 pc.

IPS e.max Ceram Art Essence & Shade Assortment

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• the set includes:

• 1x Essence Paste white (3g)

• 1x Essence Paste cream (3g)
• 1x Essence Paste lemon (3g)
• 1x Essence Paste sunset (3g)
• 1x Essence Paste copper (3g)
• 1x Essence Paste khaki (3g)
• 1x Essence Paste mahogany (3g)
• 1x Essence Paste anthracite (3g)
• 1x Shade Dentin 1 (3g)
• 1x Shade Dentin 2 (3g)
• 1x Shade Dentin 3 (3g)
• 1x Shade Dentin 4 (3g)
• 1x Shade Dentin 5 (3g)
• 1x Shade Incisal 1 (3g)
• 1x Shade Incisal 2 (3g)
• 1x Magic Glaze Paste FLU (3g)
• 1x Universal Liquid (60ml)

IPS e.max Ceram Art Essence 3g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Essence 3g

IPS e.max Ceram Art Gingiva Illusion & Structure

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• the set includes:

• 1x Illusion Paste Gingiva Basis rose (5g)

• 1x Illusion Paste Gingiva Basis pink (5g)
• 1x Illusion Paste Gingiva Basis orange-pink (5g)
• 1x Illusion Paste Gingiva Effect soft-mauve (5g)
• 1x Illusion Paste Gingiva Effect intense-mauve (5g)
• 1x Illusion Paste Gingiva Effect soft-bone (5g)
• 1x Illusion Paste Gingiva Effect intense-bone (5g)
• 1x Illusion Paste Gingiva Effect capillary (5g)
• 1x Illusion Paste Gingiva Effect fibers (5g)
• 1x Illusion Paste Gingiva Effect Margin light (5g)
• 1x Illusion Paste Gingiva Effect Margin dark (5g)
• 1x Illusion Paste Gingiva Effect intense-red (5g)
• 1x Structure Paste Gingiva soft-pink (5g)
• 1x Structure Paste Gingiva pink (5g)
• 1x Magic Glaze Paste (3g)
• 1x Universal Liquid (60ml)

IPS e.max Ceram Art Illusion & Structure Assortment

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• the set includes:

• 1x Illusion Paste Mamelon reddish-orange (5g)

• 1x Illusion Paste Mamelon light-salmon (5g)
• 1x Illusion Paste Opal light-blue (5g)
• 1x Illusion Paste Opal sky-blue (5g)
• 1x Illusion Paste Opal night-blue (5g)
• 1x Illusion Paste Halo ivory (5g)
• 1x Illusion Paste Halo ocher (5g)
• 1x Illusion Paste Enamel pearl (5g)
• 1x Illusion Paste Absorber light-violet (5g)
• 1x Illusion Paste Fog Absorber (5g)
• 1x Illusion Paste Absorber quartz (5g)
• 1x Illusion Paste Cervical yellow-pink (5g)
• 1x Illusion Paste Cervical nude (5g)
• 1x Structure Paste neutral (5g)
• 1x Structure Paste cloud (5g)
• 1x Shade Dentin 2 (3g)
• 1x Shade Dentin 3 (3g)
• 1x Magic Glaze Paste FLU (3g)
• 1x Universal Liquid (60ml)

IPS e.max Ceram Art Illusion Paste 5g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Illusion Paste 5g

IPS e.max Ceram Art Illusion Paste Gingiva 5g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Illusion Paste Gingiva 5g

IPS e.max Ceram Art Magic Glaze 3g or 9g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Magic Glaze 3g or 9g

IPS e.max Ceram Art Magic Glaze FLUO 3g or 9g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Magic Glaze FLUO 3g or 9g

IPS e.max Ceram Art Shade Dentin 3g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used to characterize and glaze a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables colouring and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly where they are applied, retaining their color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, ensuring safe application and rich color effects.

Packaging:

• Shade dentin 3g

IPS e.max Ceram Art Shade Incisal 3g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Shade Incisal 3g

IPS e.max Ceram Art Structur Gingiva 5g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Structur Gingiva 5g

IPS e.max Ceram Art Structure Paste 5g

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Structure Paste 5g

IPS e.max Ceram Art Universal liquid 15ml or 60ml

IPS e.max Ceram Art - Every smile is a work of art

IPS e.max® Ceram Art is an innovative line of universal, ready-to-use staining, glazing, and modeling pastes. These products are designed for characterizing and glazing ceramic materials, enabling the individual design of ceramic restorations.

The materials are adapted to Ivoclar layered, pressed and CAD ceramics and are compatible with a wide range of coefficient of thermal expansion (CTE) of ceramics: 9.4−17.5×10−6/K(25−500° C).

IPS e.max Ceram Art can be safely and versatilely used for characterizing and glazing a wide variety of ceramic materials, including:

• zirconium oxide;
• polished ceramics (blocks);
• pressed ceramics;
• veneering ceramics (zirconium oxide and lithium metal disilicate).

Features and benefits of the product:

• greater efficiency and aesthetics of work:
• ready-to-use pastes ensure effective and time-saving application without the need for mixing;
• self-leveling and self-moisturizing glazing pastes guarantee excellent wetting for easy and effective application;
• the "one-shot" technique enables staining and glazing in one firing cycle without run-off, which is efficient, time-saving and ideal for the "wet-in-wet" technique;
• stable consistency during dyeing, dyes remain exactly in the place of application, retaining color even after firing;
• stable consistency materials retain their shape during application and after firing, enabling precise creation of 3D effects with depth and better control;
• the "self-glazing" effect provides a natural shine without the need for additional glaze firing;
• phenomenal gum shades are matched to natural gum phenotypes;
• Cadmium-free gum colors are characterized by excellent stability during firing, which ensures safe application and rich color effects.

Packaging:

• Universal liquid 15ml or 60ml

Ivotion Base Print 3D printing resin for denture plates 1000ml

Aesthetic base material for 3D printed prostheses, enabling efficient production of prostheses in proven PMMA quality.

Ivotion Base Print is the first 3D printing material for permanent applications from Ivoclar (material quality meets the requirements of the EN ISO 20795-1 standard.)

Drawing on Ivoclar's extensive experience in materials, Ivotion Base Print provides high-quality, durable and aesthetic denture bases with exceptional wearing comfort and high accuracy of fit.

Characteristics:

• Ivotion Base Print is available in three shades, allowing you to create individual dentures with a natural look;
• the material is characterized by a low tendency to plaque formation and discoloration.
• Ivotion Base Print can be used in the PrograPrint system and other approved printing systems within the approved process: Ivoclar: PrograPrint PR5, Asiga: Max, Max 2, MAX X, Ultra, Pro 4K, Pro 4K XL.

Packaging:

• 1000ml

Keystone KeyMill HI Denture Acrylic Disc 98x25mm

Acrylic discs for denture bases (Denture Base Disc).

KeyMill discs combine the well-known Diamond D material formula with an innovative denture milling process.

This solution allows you to enjoy the convenience, speed and savings of CAD/CAM technology, without compromising the aesthetics and durability known from the Diamond D line.

Shades:

• Original: classic, most universal pink;
• Light Reddish Pink: a light shade with more pronounced red tones (imitation of vascularity).

Characteristics:

• exceptional durability: the finished product is characterized by excellent bending resistance and high resistance to cracking upon impact.
• natural aesthetics: the material provides an appearance very similar to natural gum tissue;
• patient comfort: precision milling combined with high-quality acrylic guarantees a perfect fit;
• production efficiency: optimization of working time thanks to the speed of the milling process while maintaining the highest quality standards;
• CE certified, Health Canada approved and 510(k) certified.

Packaging:

• 1 pc.

Keystone KeyMill HI Denture Acrylic Disc 98x30mm

Acrylic discs for denture bases (Denture Base Disc).

KeyMill discs combine the well-known Diamond D material formula with an innovative denture milling process.

This solution allows you to enjoy the convenience, speed and savings of CAD/CAM technology, without compromising the aesthetics and durability known from the Diamond D line.

Shades:

• Original: classic, most universal pink;
• Light Reddish Pink: a light shade with more pronounced red tones (imitation of vascularity).

Characteristics:

• exceptional durability: the finished product is characterized by excellent bending resistance and high resistance to cracking upon impact.
• natural aesthetics: the material provides an appearance very similar to natural gum tissue;
• patient comfort: precision milling combined with high-quality acrylic guarantees a perfect fit;
• production efficiency: optimization of working time thanks to the speed of the milling process while maintaining the highest quality standards;
• CE certified, Health Canada approved and 510(k) certified.

Packaging:

• 1 pc.

Keystone resin KeyDenture Try In A1 0.5kg

Designed with precision and efficiency in mind, the KeyDenture Try-In is indicated for 3D printing biocompatible, short-term trial and temporary dentures.

The product is used to reliably assess fit, occlusion, aesthetics and phonetics during follow-up visits, ensuring full comfort for the patient and the dentist before the final prosthesis is made.

Characteristics:

• color A1;
• low cost when making trial dentures;
• exceptional print surface quality;
• ease of characterization, which allows for better aesthetic matching;
• can be polished to a high gloss;
• biocompatible medical device;
• composition free from MMA, BPA and phthalates.

Technical Specifications;

• bending strength: 56-68 MPa;
• modulus of elasticity: 1500-1750 MPa;
• water sorption: 9−13 μg/mm3;
• elongation at break: 30-43%;
• biocompatibility: ISO 10993 meets standards (PASS).

Packaging:

• 0.5kg

Keystone resin KeyGuide 0.5kg

KeyGuide resin is ideal for creating clear surgical guides that allow doctors to place implants at precise angles and depths.

KeyGuide® is a rigid, biocompatible (Class I) 3D printing resin designed for creating surgical guides.

Characteristics:

• intended for use in DLP 3D printers using light with a wavelength of 385 nm to 405 nm;
• biocompatible;
• provides excellent accuracy for precise implant placement;
• transparent for maximum visibility;
• Possibility of sterilization in an autoclave.

Physical and Mechanical Properties:

• bending strength: 106 MPa;
• flexural modulus: 2400 MPa;
• elongation at break: 6.3%;
• biocompatibility: ISO 10993-5 meets (PASS);
• hardness (Shore D): 95 D;

Packaging:

• 0.5kg

Keystone resin KeyGuide 1kg

KeyGuide resin is ideal for creating clear surgical guides that allow doctors to place implants at precise angles and depths.

KeyGuide® is a rigid, biocompatible (Class I) 3D printing resin designed for creating surgical guides.

Characteristics:

• intended for use in DLP 3D printers using light with a wavelength of 385 nm to 405 nm;
• biocompatible;
• provides excellent accuracy for precise implant placement;
• transparent for maximum visibility;
• Possibility of sterilization in an autoclave.

Physical and Mechanical Properties:

• bending strength: 106 MPa;
• flexural modulus: 2400 MPa;
• elongation at break: 6.3%;
• biocompatibility: ISO 10993-5 meets (PASS);
• hardness (Shore D): 95 D;

Packaging:

• 1kg

Keystone resin KeySplint Hard 0.5kg

Light-curing methacrylate-based resin for 3D printing.

For DLP/LED printers with a wavelength of 385-405 nm, also suitable for monochrome printers.

Application:

• for making bite splints, retainers, aligners and anti-snoring splints.

Characteristics:

• transparent purple;
• easy to clean by the patient;
• does not contain softeners, plasticizers and bisphenol A;
• Class IIa medical device.
• ability to print on multiple printers;
• high resistance to breakage;
• it is not fragile;
• abrasion resistant;
• easy to polish;
• biocompatible.

Physical data:

• bending strength 60-65 MPa (ISO 20795-2);
• elongation at break 9% (ASTM D638);
• Young's modulus 1510-1600 MPa (ISO 20795-2);
• water sorption 18 µg/mm³ (ISO 20795-2).

Packaging:

• 0.5kg

Keystone resin KeySplint Hard 1kg

Light-curing methacrylate-based resin for 3D printing.

For DLP/LED printers with a wavelength of 385-405 nm, also suitable for monochrome printers.

Application:

• for making bite splints, retainers, aligners and anti-snoring splints.

Characteristics:

• transparent purple;
• easy to clean by the patient;
• does not contain softeners, plasticizers and bisphenol A;
• Class IIa medical device.
• ability to print on multiple printers;
• high resistance to breakage;
• it is not fragile;
• abrasion resistant;
• easy to polish;
• biocompatible.

Physical data:

• bending strength 60-65 MPa (ISO 20795-2);
• elongation at break 9% (ASTM D638);
• Young's modulus 1510-1600 MPa (ISO 20795-2);
• water sorption 18 µg/mm³ (ISO 20795-2).

Packaging:

• 1kg

Keystone resin KeySplint Hard Clear 0.5kg

Light-curing methacrylate-based resin for 3D printing.

For DLP/LED printers with a wavelength of 385-405 nm, also suitable for monochrome printers.

Can be printed on the Mars 5Ultra 9K printer (micran code 8572).

Application:

• for making bite splints, retainers, aligners and anti-snoring splints.

Characteristics:

• transparent color (clear);
• easy to clean by the patient;
• does not contain softeners, plasticizers and bisphenol A;
• Class IIa medical device.
• ability to print on multiple printers;
• high resistance to breakage;
• it is not fragile;
• abrasion resistant;
• easy to polish;
• biocompatible.

Physical data:

• bending strength 60-65 MPa (ISO 20795-2);
• elongation at break 9% (ASTM D638);
• Young's modulus 1510-1600 MPa (ISO 20795-2);
  • water sorption 18 µg/mm³ (ISO 20795-2).

Packaging:

• 0.5kg

Keystone resin KeySplint Hard Clear 1kg

Light-curing methacrylate-based resin for 3D printing.

For DLP/LED printers with a wavelength of 385-405 nm, also suitable for monochrome printers.

Can be printed on the Mars 5Ultra 9K printer (micran code 8572).

Application:

• for making bite splints, retainers, aligners and anti-snoring splints.

Characteristics:

• transparent color (clear);
• easy to clean by the patient;
• does not contain softeners, plasticizers and bisphenol A;
• Class IIa medical device.
• ability to print on multiple printers;
• high resistance to breakage;
• it is not fragile;
• abrasion resistant;
• easy to polish;
• biocompatible.

Physical data:

• bending strength 60-65 MPa (ISO 20795-2);
• elongation at break 9% (ASTM D638);
• Young's modulus 1510-1600 MPa (ISO 20795-2);
  • water sorption 18 µg/mm³ (ISO 20795-2).

Packaging:

• 1kg

Keystone resin KeySplint Soft 0.5kg

KeySplint Soft resin is fully biocompatible and complies with international regulations and standards for medical devices.

Using unique technologies, Keystone Industries has developed a one-of-a-kind 3D printing resin for the production of flexible dental splints, night guards, and whitening trays.

This DLP-optimized resin is a unique printable material that combines the strength needed to protect teeth from disorders like bruxism with added flexibility for greater patient comfort.

KeySplint Soft is also easy for the patient to clean.

Characteristics:

• can be printed on the Mars 5Ultra 9K printer (micran code 8572);
• the solid formula allows for a three-year guaranteed shelf life;
• is color stable and has been proven in many open-source printers.
• no other dental splint resin offers the quality and performance of KeySplint Soft.

Advantages:

• biocompatible;
• transparent;
• easy to polish;
• resistant to discoloration.

Physical data:

• flexural strength 2.6-4.4 MPa (ISO 20795-2);
• Young's modulus 1356 MPa (ASTM D790);
• final hardness 82 Shore D;
• water sorption <18 µg/mm³ (ISO 20795-2).

Packaging:

• 0.5kg

Keystone resin KeySplint Soft 1kg

KeySplint Soft resin is fully biocompatible and complies with international regulations and standards for medical devices.

Using unique technologies, Keystone Industries has developed a one-of-a-kind 3D printing resin for the production of flexible dental splints, night guards, and whitening trays.

This DLP-optimized resin is a unique printable material that combines the strength needed to protect teeth from disorders like bruxism with added flexibility for greater patient comfort.

KeySplint Soft is also easy for the patient to clean.

Characteristics:

• can be printed on the Mars 5Ultra 9K printer (micran code 8572);
• the solid formula allows for a three-year guaranteed shelf life;
• is color stable and has been proven in many open-source printers.
• no other dental splint resin offers the quality and performance of KeySplint Soft.

Advantages:

• biocompatible;
• transparent;
• easy to polish;
• resistant to discoloration.

Physical data:

• flexural strength 2.6-4.4 MPa (ISO 20795-2);
• Young's modulus 1356 MPa (ASTM D790);
• final hardness 82 Shore D;
• water sorption <18 µg/mm³ (ISO 20795-2).

Packaging:

• 1kg

Keystone resin KeySplint Soft Clear 0.5 kg

Light-curing resin, methacrylate-based, for 3D printing.

For the production of flexible, transparent bite splints, orthodontic transfer splints, whitening splints, and sports mouthguards.

Characteristics:

• for DLP/LED and DUP/LCD printers;
• the material has a memory effect and can be adjusted by heating;
• does not contain softeners, plasticizers and bisphenol A;
• Class IIa medical device.

Advantages:

• resin combining strength and flexibility.
• Strength is necessary during disorders such as bruxism to protect teeth, flexibility improves patient comfort.
• Covers and rails printed on KeySplint soft are very easy to clean and are stain resistant.
• transparent color (clear).

Physical data:

• flexural strength 2.6-4.4 MPa (ISO 20795-2);
• Young's modulus 1356 MPa (ASTM D790);
• final hardness 82 Shore D;
• water sorption <18 µg/mm³ (ISO 20795-2).

Packaging:

• 0.5kg

Keystone resin KeySplint Soft Clear 1kg

Light-curing resin, methacrylate-based, for 3D printing.

For the production of flexible, transparent bite splints, orthodontic transfer splints, whitening splints, sports mouthguards.

Characteristics:

• for DLP/LED and DUP/LCD printers;
• can be printed on the Mars 5Ultra 9K printer (micran code 8572);
• the material has a memory effect and can be adjusted by heating;
• does not contain softeners, plasticizers and bisphenol A;
• Class IIa medical device.

Advantages:

• resin combining strength and flexibility.
• Strength is necessary during disorders like bruxism to protect teeth, flexibility improves patient comfort.
• Covers and rails printed on KeySplint soft are very easy to clean and are stain resistant.
• transparent color (clear).

Physical data:

• flexural strength 2.6-4.4 MPa (ISO 20795-2);
• Young's modulus 1356 MPa (ASTM D790);
• final hardness 82 Shore D;
• water sorption <18 µg/mm³ (ISO 20795-2).

Packaging:

• 1kg

Mestra MICROWAVES II zirconium sintering furnace

A modern microwave sintering furnace for zirconium. MICROWAVES II version.

An oven using the latest technological advances in microwave heating.

This solution offers key advantages over conventional sintering furnaces:

• total sintering time: approx. 4 hours;
• heating time to 1550 ºC: 110 min;
• cooling to 300 ºC: 130 min.

Unlike conventional devices—in which heat penetrates from the outside into the structure—in a microwave oven, heat is generated simultaneously at all points within the material. This results in a much more even temperature distribution. The resulting sintered structure is cleaner, more durable, and more precise because there are no thermal "drafts" during heating.

Zirconia is a material with very high thermal resistance. In a traditional furnace, heating must occur very slowly, with numerous stabilization stages, to ensure the heat reaches the interior of the prosthesis. This causes long sintering cycles.

Key benefits:

• efficiency: the fastest program takes about 4 hours (110 min of heating + 130 min of cooling), which shortens the time compared to conventional ovens;
• economy and maintenance: lower power, fewer components and compact size translate into low maintenance costs, the furnace does not require delicate and expensive molybdenum disilicide heating elements;
• very low energy consumption: power consumption is only 800-1100 W during a full cycle;
• greater productivity: the ability to carry out several production cycles in one day, which significantly increases the efficiency of the workshop;
• ease of use: the device is extremely simple in everyday use;
• compact dimensions: the furnace is much smaller than standard devices – it will fit in any laboratory;
• ready to work: the stove is delivered with all necessary accessories for immediate start-up;
• comfort of work: the device practically does not release heat into the environment, which is extremely important in summer in closed rooms.

Technical data:

• dimensions (width x depth x height): 385 x 440 x 547 mm;
• weight: 31 kg;
• supply voltage: AC 230 V, 50 Hz;
• protection (fuse): 15 A;
• maximum power: 2000 W;
• maximum temperature: 1550 ºC.

Packaging:

• 1 pc.

OptraGloss Extra Oral eraser disc navy blue 1 piece

OptraGloss® Extra Oral are universal rubber cups for pre-polishing and high-gloss polishing of ceramic and zirconium oxide restorations.

Characteristics:

• two-stage polishing and polishing paste ensure perfect results in just a few minutes;
• for extraoral use;
• OptraGloss® Extra Oral two-stage diamond cups simplify work, saving time;

Packaging:

• 1x navy blue rubber disc - pre-polishing;

OptraGloss Extra Oral eraser flame blue 1 piece

OptraGloss® Extra Oral are universal rubber cups for pre-polishing and high-gloss polishing of ceramic and zirconium oxide restorations.

Characteristics:

• two-stage polishing and polishing paste ensure perfect results in just a few minutes;
• for extraoral use;
• OptraGloss® Extra Oral two-stage diamond cups simplify work, saving time;

Packaging:

• 1x flame blue eraser - high gloss polishing;

OptraGloss Extra Oral eraser flame navy blue 1 piece

OptraGloss® Extra Oral are universal rubber cups for pre-polishing and high-gloss polishing of ceramic and zirconium oxide restorations.

Characteristics:

• two-stage polishing and polishing paste ensure perfect results in just a few minutes;
• for extraoral use;
• OptraGloss® Extra Oral two-stage diamond cups simplify work, saving time;

Packaging:

• 1x flame eraser navy blue - pre-polishing;

OptraGloss Extra Oral eraser shield blue 1 piece

OptraGloss® Extra Oral are universal rubber cups for pre-polishing and high-gloss polishing of ceramic and zirconium oxide restorations.

Characteristics:

• two-stage polishing and polishing paste ensure perfect results in just a few minutes;
• for extraoral use;
• OptraGloss® Extra Oral two-stage diamond cups simplify work, saving time;

Packaging:

• 1x blue rubber disc - high gloss polishing;

OptraGloss Extra Oral eraser spiral circle blue 1 piece

OptraGloss® Extra Oral are universal rubber cups for pre-polishing and high-gloss polishing of ceramic and zirconium oxide restorations.

Characteristics:

• two-stage polishing and polishing paste ensure perfect results in just a few minutes;
• for extraoral use;
• OptraGloss® Extra Oral two-stage diamond cups simplify work, saving time;

Packaging:

• 1x blue spiral wheel eraser - high gloss polishing;

OptraGloss Extra Oral eraser spiral circle navy blue 1 piece

OptraGloss® Extra Oral are universal rubber cups for pre-polishing and high-gloss polishing of ceramic and zirconium oxide restorations.

Characteristics:

• two-stage polishing and polishing paste ensure perfect results in just a few minutes;
• for extraoral use;
• OptraGloss® Extra Oral two-stage diamond cups simplify work, saving time;

Packaging:

• 1x navy blue spiral wheel eraser - pre-polishing;

OptraGloss Extra Oral Polishing Paste 20g

Universal polishing paste for polishing IPS e.max® CAD, IPS e.max® ZirCAD Prime and IPS Empress® CAD ceramics and zirconia.

The paste adds shine to ceramic restorations and is ideal for use in combination with Ivoclar's OptraGloss® Pre-Polisher and High-Gloss Polisher.

Packaging:

• 20g

OptraGloss Extra Oral Starter Kit

OptraGloss® Extra Oral are universal rubber cups for pre-polishing and high-gloss polishing of ceramic and zirconium oxide restorations.

Characteristics:

• two-stage polishing and polishing paste ensure perfect results in just a few minutes;
• for extraoral use;
• OptraGloss® Extra Oral two-stage diamond cups simplify work, saving time;
• Thanks to the polishing paste, the final result meets the highest aesthetic standards.

Packaging:

• 2x flame eraser navy blue - pre-polishing;
• 1x navy blue rubber disc - pre-polishing;
• 2x navy blue spiral wheel eraser - pre-polishing;
• 2x flame blue eraser - high gloss polishing;
• 1x blue rubber disc - high gloss polishing;
• 2x blue spiral wheel eraser - high gloss polishing;
• 1x polishing paste 20g.

ProArt Print Model beige 1000ml

ProArt Print Model New Formula is an opaque, beige resin, suitable for model making.

It can be used to produce implant models, models for the production of vacuum-formed splints, and models with removable matrices.

ProArt Print Model creates models with excellent dimensional stability.

Their high precision ensures accurate fit of the finished restorations.

Packaging:

• 1 pc/1000 ml

Renfert Polish Paste 3D-printed materials diamond paste 13g Promotion

Specialized extraoral polishing paste, designed to give a high gloss to restorations made using 3D printing technology (from resins or filaments).

Renfert catalog number 5104000

Characteristics:

• instant results: quick polishing results thanks to special components precisely adapted to the properties of PMMA and PETG materials;
• time saving: allows you to achieve optimal, mirror shine in a short time;
• patient comfort: perfectly smooth surface ensures high comfort of wearing the restoration and limits the accumulation of dental plaque.

Packaging:

• 1 pc.

Renfert Sand Prebonder surface pro 50µm 2kg

Prebonder surface pro, an abrasive agent for preparing the surface of the restoration before final cementation.

Renfert catalog number: 15970050

Characteristics:

• Clinical preparation of the restoration surface through precise sandblasting ensures a reliable final connection for works made of zirconium oxide, metal alloys, hybrid materials and modern polymers.
• Aluminum oxide (Al2​O3​) with a size of 50 μm, characterized by a precisely defined grain size distribution, particle shape, hardness and purity, creates – in combination with the Basic prebonder device and appropriately selected parameters – ideal micromechanical retention for obtaining permanent bonds.

Advantages:

• Scientifically proven: optimized through extensive in-vitro testing to achieve maximum bond strength during final deposition;
• reproducible results: precisely defined grain geometry, material hardness and cleanliness guarantee consistently high quality of the processed surface;
• Gentle on materials: targeted surface modification ensures perfect retention without aggressive processing and the risk of loss of flexural strength.

Technical specifications:

• application: preparation of the surfaces of permanent prosthetic restorations before final cementation;
• materials: zirconium oxide, metal alloys, hybrid materials, modern polymers;
• Compatibility: only for the special tank of the Basic prebonder device;
• optimal operating pressure: 0.6–1.0 bar (recommended: 0.8 bar);
• grain size: 50 μm Al2​O3​;
• purity: > 99.7% alumina;
• package contents: 4 × 500 g in hermetically sealed units.

Packaging:

• 4x500g

Renfert Silent XS Mobile Extractor Promotion

SILENT XS is a fully mobile suction unit designed for dental offices and prosthetic laboratories.

Captures dust with high suction power directly at the source, e.g. when processing temporary fillings, splints or dentures.

This compact device is wireless and battery-powered, so you can easily move it between different locations.

Thanks to its quiet operation, it is the ideal solution for efficient and clean work, even during mobile use.

SILENT XS is also ideal for use, for example, in the process of embedding works made using CAD/CAM technology.

• After milling fillings from blocks or blanks, minor corrections are usually necessary using a micromotor, a mobile suction unit prevents sanding dust from materials such as zirconium oxide or PMMA from contaminating the air and settling on sensitive equipment, furniture or the floor.

Renfert catalog number 29220000

Characteristics:

• flexible – wireless and battery-powered for maximum freedom of movement;
• simple – one-handed operation and LED lighting for optimal visibility of the workpiece;
• clean – clean working air and effective protection against dust thanks to the H13/HEPA filter with a 99.99% absorption efficiency, bagless.

Technical Data:

• weight (without battery) - 1.12 kg;
• output voltage - 12V;
• battery (not included) - 8 x AA (NiMH batteries) Note: Do not use Li-Ion batteries!;
• dimensions (width x height x depth) (including cover) - 223 x 248 x 193 mm;
• permissible mains voltage - 100 - 240 V;
• permissible mains frequency - 50 - 60 Hz;\
• power consumption - 1.8 A;
• volume flow (max) - 510 l/min;
• filtering technology - fine filter;
• filter quality - HEPA / H13;
• sound pressure level (LpA) (at max. volume flow) - 52.7 dB(A).

Packaging:

• 1 pc.

Runyes - iGrapher G6 Photogrammetric Camera

Runyes iGrapher G6 - The new standard of precision in full-arch implant prosthetics.

Photogrammetric camera for digital implant prosthetics

Runyes iGrapher G6 is an advanced photogrammetric camera designed to precisely map the position of implants in implant prosthetics, especially in full-arch cases in edentulous patients.

The device enables quick, non-contact and extremely accurate acquisition of implantological data, which constitutes an ideal basis for designing passive prosthetic works in a CAD/CAM environment.

Most important use:

• The iGrapher G6 digitally transfers the position, axes, and relationships of implants from the patient's mouth to the prosthetic software. Photogrammetry enables the fabrication of bridges, bars, and full-arch structures with the highest precision and passive seating.

Why iGrapher G6 Photogrammetry?:

• maximum accuracy of implants position measurement accuracy: 20–30 μm;
• angular accuracy: < 1°;
• ideal data for screwed structures.

Photogrammetry eliminates errors typical of impressions and intraoral scanning in full arches, ensuring perfect alignment of suprastructures.

Characteristics:

• full arc in 20 seconds;
• quick scan of the entire arch;
• automatic data alignment;
• intelligent implant recognition;
• shorter working time, greater predictability and higher patient comfort;
• non-contact scanning – patient comfort;
• no impression materials;
• no gag reflex;
• shortened visit time;

The perfect solution for toothless patients and clinics focused on modern digital treatment.

Simple and effective workflow

Mount → Scan → Export STL

• quick implementation;
• ready-made STL files without additional processing.

Full CAD/CAM compatibility:

• cooperation with Exocad and 3Shape;
• compatibility with all major implant systems;
• integration with popular intraoral scanners.

Clinical benefits:

• passive placement of prosthetic works;
• fewer corrections and follow-up visits;
• greater durability of implants and suprastructures;
• saving time for the doctor and technician;
• higher patient satisfaction.

Technical specifications:

• technology: implant photogrammetry;
• position accuracy: 20–30 μm;
• angular accuracy: < 1°;
• full arc scan time: ~20 s;
• weight: 1.3 kg;
• battery: 2500 mAh (up to 3 hours of operation);
• data export: STL;
• Compatibility: Exocad / 3Shape.

Packaging:

• 1 pc.

Runyes 3DS V6 Wireless Intraoral Scanner - New

The Runyes 3DS V6 is an innovative wireless intraoral scanner that sets new standards in digital dentistry. It combines exceptional precision, speed, and ease of use, offering clinicians an ideal tool for improving service quality and streamlining workflow.

Thanks to its lightweight, slim design and quiet operation, the Runyes V6 scanner perfectly meets the needs of modern dental offices.

Runyes 3DS V6 is a combination of the latest technologies, ergonomics and reliability – a tool created with modern digital dentistry in mind.

Key advantages:

• Wireless and wired operation – the scanner operates in wireless mode, but the set also includes a cable that allows it to work like a traditional wired scanner.
• Long battery life – the set includes 2 batteries that provide up to 2 hours of continuous operation each, ensuring comfortable use throughout the day.
• Lightweight and ergonomic design – weighing only 210 g; comfortable grip and slim head make it easy to scan hard-to-reach areas.
• Quiet operation – low noise level increases patient and staff comfort.
• Speed and precision – high accuracy (up to 10 μm) and fast 3D data acquisition shorten work time and increase efficiency.
• Expanded field of view – more data in one scan means fewer repetitions and a faster visit.
• Modern features – including a gesture sensor (touchless operation), orthodontic simulation, intelligent scanbody adjustment, and metal scanning capability.
• Security and convenience – cloud case sharing, oral health report generation, and full compatibility with PLY, STL, and OBJ formats.
• Anti-fogging system – built-in fan ensures uninterrupted and clear visualization.
• Motion gesture sensor – moving the scanner rotates the scan on the computer monitor

Technical specifications:

• Scanner dimensions: 245 × 41 × 57 mm;
• Weight: 210 g;
• Accuracy: up to 10 µm;
• Depth of view: 0-25 mm;
• Frames per second: 20 fps;
• Field of view: 16 × 14 mm;
• Imaging method: continuous 3D video capture;
• Light source: LED;
• True Color: yes;
• Output format: PLY, STL, OBJ;

Packaging:

• 1 pc.

Runyes Digital Tooth Color Detector

Runyes - Digital Tooth Color Detector

Perfectly matched color at your fingertips.

The first surface color detector based on spectrophotometric technology.

It uses multiple algorithms to reflect true color accuracy.

Designed to read colors according to the VITA Classic and Vita 3D Master shade guides.

The most important advantages:

• High Accuracy - The design incorporates a custom optical filter inside the device. Single-point color measurement is complemented by additional surface coverage, allowing for the recognition of a wide range of color information and effectively eliminating errors for improved accuracy.

• Unaffected by external factors - Advanced technology eliminates the need for special lighting conditions and ensures accurate color readings in a variety of environments. No need to adjust conditions; color sampling can be performed anywhere with a single click.

• Lightweight Design - The device weighs about as much as a smartphone. Its ergonomic design allows you to sample colors for extended periods without fatigue.

• Ultra-long battery life - Intelligent operating mode allows you to perform up to 5,000 measurements on a single charge.
• Simple interface – easy to use and easy to read data on the device.

Seven fiber optic probes provide:

• Greater Efficiency - Unlike spot color meters on the market, surface color meters eliminate the need for repeated sampling. This makes the process faster, simpler, and more convenient.
• Better Accuracy - Because tooth surfaces are complex, spot color meters often pick up random shades, leading to errors. Surface color meters scan the entire tooth surface, collecting more color information and effectively eliminating errors—guaranteeing the highest precision.
• More Stable Results - Surface color meters use multiple fiber-optic probes that cross-check data. Advanced algorithms that compare the results from different probes ensure exceptionally stable and reliable measurement results.

Technical specifications:

• Battery type: Built-in lithium-ion battery;
• Battery voltage: Fully charged at 4.2V;
• Battery capacity: 1500mAh;
• Charging port: TYPE-C;
• Charging voltage: DC-5V;
• Charging current: 1A;
• Number of measurements on a single charge: More than 5000 times.

Packaging:

• 1 pc.

Tizian Blank Flex Pink 98x20mm polyamide discs for temporary dentures, as an alternative to cast metal frameworks

Tizian Blank Flex Pink – pink medical polyamide, used for the production of temporary prostheses.

This material is characterized by flexibility after milling – similar to Deflex – and works particularly well in combination with Bredent's Qu-Resin Automix adhesive for attaching teeth to the denture base.

Main features:

• made of medical polyamide without plasticizers and PMMA;
• color: pink K (according to the Futura color palette);
• can be milled dry and wet;
• is not thermoplastic – retains its properties at higher temperatures;
• more durable and long-lasting than PMMA.

Indications:

• ideal for temporary dentures, as an alternative to cast metal frameworks.

Technical data:

• density: 1.0–1.2 g/cm³;
• bending strength: 60 MPa;
• water absorption: 40 µg/mm³;
• modulus of elasticity: 1350 MPa.

Packaging:

• 1 pc.

Tizian Blank Flex Pink 98x25mm polyamide discs for temporary dentures, as an alternative to cast metal frameworks

Tizian Blank Flex Pink – pink medical polyamide, used for the production of temporary prostheses.

This material is characterized by flexibility after milling – similar to Deflex – and works particularly well in combination with Bredent's Qu-Resin Automix adhesive for attaching teeth to the denture base.

Main features:

• made of medical polyamide without plasticizers and PMMA;
• color: pink K (according to the Futura color palette);
• can be milled dry and wet;
• is not thermoplastic – retains its properties at higher temperatures;
• more durable and long-lasting than PMMA.

Indications:

• ideal for temporary dentures, as an alternative to cast metal frameworks.

Technical data:

• density: 1.0–1.2 g/cm³;
• bending strength: 60 MPa;
• water absorption: 40 µg/mm³;
• modulus of elasticity: 1350 MPa.

Packaging:

• 1 pc.

Up3D F20 Sintering Furnace New Version

UP3D F20 The new improved version is a specialized furnace for sintering zirconia materials, characterized by a unique triangular heating chamber and 4 heating elements, which allows for efficient, uniform sintering and high quality of end products.

Characteristics:

• double sintering container;
• two-tier sintering tray;
• monitoring ambient temperature, voltage and current;
• The triangular design of the heating chamber ensures uniform and efficient sintering.
• 4 heating elements (made in Japan): Silicon carbide (SiC).
• intelligent segmented cooling:;
• large capacity and fast sintering;
• real-time monitoring display;
• intelligent fault diagnosis;

Technical Data:

• rated voltage: 220 V ±10%;
• rated frequency: 50 Hz;
• rated power: 2500 W;
• maximum operating temperature: 1550°C;
• protection level: IP21;
• net weight: 44 kg;
• dimensions (cm): 42 x 46.5 x 60.

Packaging:

• 1 pc.

Upcera Artouch Master Kit for Gum NEW

The Artouch system is an innovative set of Color & Shade Stain porcelain pastes that allows for micro-layering and precise personalization of the gum shade.

The technician can assess the color effect in real time, which guarantees fully predictable results.

Specially developed for fully anatomical, all-ceramic restorations and restorations with minimal strain relief.

Specially designed for the aesthetic finishing and characterization of gum-colored parts of all-ceramic fillings.

Artouch structural pastes introduce multidimensional anatomical details, rendering realistic transparency and natural optical phenomena such as fluorescence and opalescence. They also enable easy corrections and modeling of gingival tissues.

Ready-to-use porcelain formulas are a completely new quality in aesthetic dentistry. The Artouch system allows you to create restorations that not only meet, but often exceed patient expectations, combining simplicity of application with the highest quality of finish.

Thanks to advanced staining and shading pastes, it is possible to faithfully reproduce every natural variation of tooth and gum color.

Unique structural pastes allow technicians to precisely reproduce complex details – from the anatomical structure of molars and incisor proportions to the subtle modeling of the gum line. Each formula guarantees natural transparency, impressive opalescence and delicate fluorescence, which translates into an exceptionally authentic aesthetic effect.

Packaging:

set:

• Structure Paste 4g colors G1 Bright, G4 Dark, G6 Violet, G9 Orange, G16 Brown Pink, G21 Neutral;
• Structure Liquid 25ml;
• Stain & Glaze paste 4g colors Red, Brown Flu., Red Brown Intensive, Orange Intensive Flu., Purple Paste, Rose Paste, Rose Pink, Red Bright, Glaze Paste;
• Glaze Liquid 25ml.

Upcera Artouch Master Kit for Teeth NEW

The Artouch system is an innovative set of Color & Shade Stain porcelain pastes that allows for micro-layering and precise personalization of the tooth shade.

The technician can assess the color effect in real time, which guarantees fully predictable results.

Specially developed for fully anatomical, all-ceramic restorations and restorations with minimal strain relief.

Artouch structural pastes introduce multidimensional anatomical details, rendering realistic transparency and natural optical phenomena such as fluorescence and opalescence. They also enable easy corrections and modeling of gingival tissues.

Ready-to-use porcelain formulas are a completely new quality in aesthetic dentistry. The Artouch system allows you to create restorations that not only meet, but often exceed patient expectations, combining simplicity of application with the highest quality of finish.

Thanks to advanced staining and shading pastes, it is possible to faithfully reproduce every natural variation of tooth and gum color.

Unique structural pastes allow technicians to precisely reproduce complex details – from the anatomical structure of molars and incisor proportions to the subtle modeling of the gum line. Each formula guarantees natural transparency, impressive opalescence and delicate fluorescence, which translates into an exceptionally authentic aesthetic effect.

Packaging:

Set:

• Structure Paste colors D A2, SM Sunny Beach, M Cream, T Blue, Opal, I2, Clear;
• Structure Liquid 25ml;
• Stain & Glaze Paste colors Shade A Flu. Shade B Flu. Shade C Flu. Shade D Flu. White Flu. Vanilla Flu. Yellow Flu. Smoke Flu. Blue Flu. Dark Brown Flu. Gray Flu. Pigeon Blue Flu. Intensive Red, Glaze Paste, Glaze Paste Flu.
• Glaze Liquid 25ml.

Vertys Mineral Bond Liquid 5ml

Vertys Mineral Bond liquid.

Liquid primer for bonding composite fibers.

Indicated for adhesion (bonding) with structures made of carbon fiber, glass fiber, quartz fiber, composite and special polymers.

Packaging:

• 1 pc.

Vertys Mineral Chroma Additives Flow 3g

Vertys Mineral is an advanced, next-generation composite designed for maximum strength and aesthetics in modern prosthetics.

Thanks to its unique molecular structure, this material combines precision machining with excellent mechanical parameters.

Vertys Mineral Chroma Additives Flow is used for precise detail modeling in prosthetic restorations. The "A+" or "B+" designation indicates an intensified shade from the A or B shade group (according to the VITA shade guide), facilitating the achievement of a natural dentin color.

Material characteristics:

• material type: hybrid composite with microfiller enriched with mineral particles;
• structure: dense polymer network ensuring high abrasion resistance and color stability over time;
• biocompatibility: full integration with soft tissues, minimizing the risk of plaque build-up;
• aesthetics: high aesthetics and easy to polish to a high gloss.

Physicochemical properties:

• Shock-Absorbing: the unique ability to dampen occlusal forces. This feature drastically reduces stress transferred to the implants and the patient's bone, preventing fractures;
• flexural strength: high modulus of elasticity, which allows the material to "work" under pressure without the risk of chipping;
• chemical stability: resistance to the oral environment (pH changes, food dyes).

Application:

• work on implants;
• crowns, bridges and dentures;
• inlay/onlay and veneers.

Technical Data:

• total filler content: 68%;
• specific gravity (density) at 20 °C: 1.81 g/cm³;
• bending strength: 120 MPa;
• flexural modulus: 7500 MPa;
• compressive strength: 305 MPa;
• tensile strength (diameter): 80 MPa;
• water absorption: 20 μg/mm³;
• polishability: high;
• X-ray opacity: 220%.

Packaging:

• 1 pc.

Vertys Mineral Dentin Flow 3g

Vertys Mineral is an advanced, next-generation composite designed for maximum strength and aesthetics in modern prosthetics.

Thanks to its unique molecular structure, this material combines precision machining with excellent mechanical parameters.

Vertys Mineral Dentin flow To make the use of this new composite simple and intuitive, a system has been developed that, by combining several masses, allows technicians to create structures with aesthetics comparable to natural teeth.

The colours are perfectly matched to the VITA* colour chart, making Vertys Mineral composites easy to use as the final result always reflects the chosen colour.

Material characteristics:

• material type: hybrid composite with microfiller enriched with mineral particles;
• structure: dense polymer network ensuring high abrasion resistance and color stability over time;
• biocompatibility: full integration with soft tissues, minimizing the risk of plaque build-up;
• aesthetics: high aesthetics and easy to polish to a high gloss.

Physicochemical properties:

• Shock-Absorbing: the unique ability to dampen occlusal forces. This feature drastically reduces stresses transferred to the implants and the patient's bone, preventing fractures;
• flexural strength: high modulus of elasticity, which allows the material to "work" under pressure without the risk of chipping;
• chemical stability: resistance to the oral environment (pH changes, food dyes).

Application:

• work on implants;
• crowns, bridges and dentures;
• inlay/onlay and veneers.

Technical Data:

• total filler content: 68%;
• specific gravity (density) at 20 °C: 1.81 g/cm³;
• bending strength: 120 MPa;
• flexural modulus: 7500 MPa;
• compressive strength: 305 MPa;
• tensile strength (diameter): 80 MPa;
• water absorption: 20 μg/mm³;
• polishability: high;
• X-ray opacity: 220%.

Packaging:

• 1 pc.

Vertys Mineral Dentin Paste 4g

Vertys Mineral is an advanced, next-generation composite designed for maximum strength and aesthetics in modern prosthetics.

Thanks to its unique molecular structure, this material combines precision machining with excellent mechanical parameters.

Vertys Mineral Dentin Paste To make the use of this new composite simple and intuitive, a system has been developed that, by combining several masses, allows technicians to create structures with aesthetics comparable to natural teeth.

The colours are perfectly matched to the VITA* colour chart, making Vertys Mineral composites easy to use as the final result always reflects the chosen colour.

Material characteristics:

• material type: hybrid composite with microfiller enriched with mineral particles;
• structure: dense polymer network ensuring high abrasion resistance and color stability over time;
• biocompatibility: full integration with soft tissues, minimizing the risk of plaque build-up;
• aesthetics: high aesthetics and easy to polish to a high gloss.

Physicochemical properties:

• Shock-Absorbing: the unique ability to dampen occlusal forces. This feature drastically reduces stresses transferred to the implants and the patient's bone, preventing fractures;
• flexural strength: high modulus of elasticity, which allows the material to "work" under pressure without the risk of chipping.
• chemical stability: resistance to the oral environment (pH changes, food dyes).

Application:

• work on implants;
• crowns, bridges and all-on dentures;
• inlay/onlay and veneers.

Technical Data:

• total filler content: 79%;
• specific gravity: 1.90 g/cm³;
• bending strength: 137 MPa;
• modulus of elasticity: 9000 MPa;
• compressive strength: 330 MPa;
• tensile strength: 80 MPa;
• water absorption: 15 μg/mm³;
• polishability: high;
• X-ray opacity: 220%.

Packaging:

• 1 pc.