IPS e.max ZirCAD LT 98.5x12mm
IPS e.max ZirCAD LT is the most versatile material in the portfolio. It combines high mechanical strength (1200 MPa) with natural aesthetics. These properties make IPS e.max ZirCAD LT suitable for minimally invasive single-tooth restorations and stable multi-unit frameworks. The structures supported on implants complete the enormous possibilities of using the material in the patient's mouth. Restorations can be prepared in many ways: by infiltration, partial or full veneering, making anatomical restorations.
Indications:
- Anatomical crowns.
- Three-unit or larger anatomical bridges.
- Structures supported on implants.
- Foundations for bridges.
- Crown substructures.
- Implant-supported structures.
Development techniques: (Depending on the selected disc)
- Glazing.
- Characterization with paints.
- Infiltration.
- Veneering.
Advantages and benefits:
- Minimal grinding of tooth tissues, thanks to the possibility of making a restoration with a small wall thickness.
- Minimally invasive crowns.
- Particularly suitable for long span bridges due to its excellent strength of 1200 MPa.
Packaging:
- 1 piece
IPS e.max ZirCAD LT 98.5x14mm
IPS e.max ZirCAD LT is the most versatile material in the portfolio. It combines high mechanical strength (1200 MPa) with natural aesthetics. These properties make IPS e.max ZirCAD LT suitable for minimally invasive single-tooth restorations and stable multi-unit frameworks. The structures supported on implants complete the enormous possibilities of using the material in the patient's mouth. Restorations can be prepared in many ways: by infiltration, partial or full veneering, making anatomical restorations.
Indications:
- Anatomical crowns.
- Three-unit or larger anatomical bridges.
- Structures supported on implants.
- Foundations for bridges.
- Crown substructures.
- Implant-supported structures.
Development techniques: (Depending on the selected disc)
- Glazing.
- Characterization with paints.
- Infiltration.
- Veneering.
Advantages and benefits:
- Minimal grinding of tooth tissues, thanks to the possibility of making a restoration with a small wall thickness.
- Minimally invasive crowns.
- Particularly suitable for long span bridges due to its excellent strength of 1200 MPa.
Packaging:
- 1 piece
IPS e.max ZirCAD LT 98.5x16mm
IPS e.max ZirCAD LT is the most versatile material in the portfolio. It combines high mechanical strength (1200 MPa) with natural aesthetics. These properties make IPS e.max ZirCAD LT suitable for minimally invasive single-tooth restorations and stable multi-unit frameworks. The structures supported on implants complete the enormous possibilities of using the material in the patient's mouth. Restorations can be prepared in many ways: by infiltration, partial or full veneering, making anatomical restorations.
Indications:
- Anatomical crowns.
- Three-unit or larger anatomical bridges.
- Structures supported on implants.
- Foundations for bridges.
- Crown substructures.
- Implant-supported structures.
Development techniques: (Depending on the selected disc)
- Glazing.
- Characterization with paints.
- Infiltration.
- Veneering.
Advantages and benefits:
- Minimal grinding of tooth tissues, thanks to the possibility of making a restoration with a small wall thickness.
- Minimally invasive crowns.
- Particularly suitable for long span bridges due to its excellent strength of 1200 MPa.
Packaging:
- 1 piece
IPS e.max ZirCAD LT 98.5x18mm
IPS e.max ZirCAD LT is the most versatile material in the portfolio. It combines high mechanical strength (1200 MPa) with natural aesthetics. These properties make IPS e.max ZirCAD LT suitable for minimally invasive single-tooth restorations and stable multi-unit frameworks. The structures supported on implants complete the enormous possibilities of using the material in the patient's mouth. Restorations can be prepared in many ways: by infiltration, partial or full veneering, making anatomical restorations.
Indications:
- Anatomical crowns.
- Three-unit or larger anatomical bridges.
- Structures supported on implants.
- Foundations for bridges.
- Crown substructures.
- Implant-supported structures.
Development techniques: (Depending on the selected disc)
- Glazing.
- Characterization with paints.
- Infiltration.
- Veneering.
Advantages and benefits:
- Minimal grinding of tooth tissues, thanks to the possibility of making a restoration with a small wall thickness.
- Minimally invasive crowns.
- Particularly suitable for long span bridges due to its excellent strength of 1200 MPa.
Packaging:
- 1 piece
IPS e.max ZirCAD MT Multi 98.5x16mm
IPS e.max ZirCAD MT Multi - aesthetic disc.
IPS e.max ZirCAD MT Multi is intended for the fabrication of anterior and posterior restorations. The optimized mix of raw materials gives the material better mechanical properties (850 MPa). The wide range of colors and translucency levels enhance the aesthetic appearance of anatomical crowns and bridges without the need for characterization, leading to optimized workflow in the laboratory. The reproduction of tooth colors is facilitated by polychromatic discs in shades according to the AD shade guide.
Indications:
- Anatomical crowns.
- Three-point anatomical bridges.
- Structures supported on implants.
Development techniques:
- Glazing.
- Characterization with paints.
Advantages and benefits:
- Particularly suitable for highly aesthetic monolithic restorations.
- Efficient workflow with fewer restoration steps.
- Possibility of making three-unit bridges in the anterior and posterior segment, thanks to high strength and resistance to cracks.
Packaging:
- 1 piece.
IPS e.max ZirCAD Prime 98.5X16mm
IPS e.max ZirCAD Prime redefines all-ceramics materials. This revolutionary material provides exceptional quality and aesthetics and covers a wide range of dental indications - from single crowns to 14-unit bridges - and enables a wide range of processing techniques. IPS ZirCAD Prime is the "One-Disc Solution": the material allows you to achieve the highest quality results while optimizing the efficiency and costs of dental laboratories. The Gradient Technology (GT) that is used to produce IPS e.max ZirCAD Prime represents a new, unique manufacturing method where 3Y-TZP zirconia and 5Y-TZP high translucent zirconia are combined in a very unique way.
- Due to the high strength of IPS e.max ZirCAD Prime, we can use it in every clinical case - from single crowns to 14-unit bridges. Moreover, it can be used to produce restorations with very thin walls.
Application:
- Full contour crowns.
- Full-contour 3-point bridges.
- Full contour 4-unit bridges.
- Extensive bridges, with a maximum of two points in the span.
- hats.
- 3-point or multi-point bridge foundations with up to 2 points in the span.
Processing techniques:
- Staining.
- Cut-back.
- Layering.
- Infiltration Technique.
Advantages:
- 650 MPa (5Y-TZP) flexural strength in the incisal area where high translucency and high strength are expected.
- Undisturbed progression of color and translucency thanks to GT technology.
- 1200 MPa (3Y- TZP) flexural strength In the dentine zone - where the highest forces are at work and where the greatest opacity is expected.
- > 5 MPa x m1 /2 crack resistance.
- Reduced sintering times increase the efficiency of daily laboratory tasks.
- Restorations made of IPS e.max ZirCAD Prime can be sintered in accelerated sintering processes.
- Different types of IPS e.max ZirCAD restorations can be sintered in the same process.
Packaging:
- 1 piece.
IPS e.max ZirCAD Prime 98.5X20mm
IPS e.max ZirCAD Prime redefines all-ceramics materials. This revolutionary material provides exceptional quality and aesthetics and covers a wide range of dental indications. from single crowns to 14-unit bridges - and enables a wide range of processing techniques. IPS ZirCAD Prime is a "One-Disc Solution": the material allows you to achieve the highest quality results while optimizing the efficiency and costs of dental laboratories. The Gradient Technology (GT) that is used to produce IPS e.max ZirCAD Prime represents a new, unique manufacturing method where 3Y-TZP zirconia and 5Y-TZP high translucent zirconia are combined in a very unique way.
- Due to the high strength of IPS e.max ZirCAD Prime, we can use it in every clinical case - from single crowns to 14-unit bridges. Moreover, it can be used to produce restorations with very thin walls.
Application:
- Full contour crowns.
- Full-contour 3-point bridges.
- Full contour 4-unit bridges.
- Extensive bridges, with a maximum of two points in the span.
- hats.
- 3-point or multi-point bridge foundations with up to 2 points in the span.
Processing techniques:
- Staining.
- Cut-back.
- Layering.
- Infiltration Technique.
Advantages:
- 650 MPa (5Y-TZP) flexural strength in the incisal area where high translucency and high strength are expected.
- Undisturbed progression of color and translucency thanks to GT technology.
- 1200 MPa (3Y- TZP) flexural strength In the dentine zone - where the highest forces are at work and where the greatest opacity is expected.
- > 5 MPa x m1/2 fracture toughness.
- Reduced sintering times increase the efficiency of daily laboratory tasks.
- Restorations made of IPS e.max ZirCAD Prime can be sintered in accelerated sintering processes.
- Different types of IPS e.max ZirCAD restorations can be sintered in the same process.
Packaging:
- 1 piece.
IPS e.max ZirCAD MT Multi 98.5x20mm
IPS e.max ZirCAD MT Multi is intended for the fabrication of anterior and posterior restorations. The optimized mix of raw materials gives the material better mechanical properties (850 MPa). The wide range of colors and translucency levels enhance the aesthetic appearance of anatomical crowns and bridges without the need for characterization, leading to optimized workflow in the laboratory. The reproduction of tooth colors is facilitated by polychromatic discs in shades according to the AD shade guide.
Indications:
- Anatomical crowns.
- Three-point anatomical bridges.
- Structures supported on implants.
Development techniques:
- Glazing.
- Characterization with paints.
Advantages and benefits:
- Particularly suitable for highly aesthetic monolithic restorations.
- Efficient workflow with fewer restoration steps.
- Possibility of making three-unit bridges in the anterior and posterior segment, thanks to high strength and resistance to cracks.
Packaging:
- 1 piece.
IPS e.max ZirCAD LT 98.5x10mm
IPS e.max ZirCAD LT is the most versatile material in the portfolio. It combines high mechanical strength (1200 MPa) with natural aesthetics. These properties make IPS e.max ZirCAD LT suitable for minimally invasive single-tooth restorations and stable multi-unit frameworks. The structures supported on implants complete the enormous possibilities of using the material in the patient's mouth. Restorations can be prepared in many ways: by infiltration, partial or full veneering, making anatomical restorations.
Indications:
- Anatomical crowns.
- Three-unit or larger anatomical bridges.
- Structures supported on implants.
- Foundations for bridges.
- Crown substructures.
- Implant-supported structures.
Development techniques: (Depending on the selected disc)
- Glazing.
- Characterization with paints.
- Infiltration.
- Veneering.
Advantages and benefits:
- Minimal grinding of tooth tissues, thanks to the possibility of making a restoration with a small wall thickness
- Minimally invasive crowns
- Particularly suitable for long span bridges due to its excellent strength of 1200 MPa
Packaging:
- 1 piece
IPS e.max ZirCAD LT 98.5x20mm
IPS e.max ZirCAD LT is the most versatile material in the portfolio. It combines high mechanical strength (1200 MPa) with natural aesthetics. These properties make IPS e.max ZirCAD LT suitable for minimally invasive single-tooth restorations and stable multi-unit frameworks. The structures supported on implants complete the enormous possibilities of using the material in the patient's mouth. Restorations can be prepared in many ways: by infiltration, partial or full veneering, making anatomical restorations.
Indications:
- Anatomical crowns.
- Three-unit or larger anatomical bridges.
- Structures supported on implants.
- Foundations for bridges.
- Crown substructures.
- Implant-supported structures.
Development techniques: (Depending on the selected disc)
- Glazing.
- Characterization with paints.
- Infiltration.
- Veneering.
Advantages and benefits:
- Minimal grinding of tooth tissues, thanks to the possibility of making a restoration with a small wall thickness.
- Minimally invasive crowns.
- Particularly suitable for long span bridges due to its excellent strength of 1200 MPa.
Packaging:
- 1 piece
IPS e.max ZirCAD LT 98.5x25mm
IPS e.max ZirCAD LT is the most versatile material in the portfolio. It combines high mechanical strength (1200 MPa) with natural aesthetics. These properties make IPS e.max ZirCAD LT suitable for minimally invasive single-tooth restorations and stable multi-unit frameworks. The structures supported on implants complete the enormous possibilities of using the material in the patient's mouth. Restorations can be prepared in many ways: by infiltration, partial or full veneering, making anatomical restorations.
Indications:
- Anatomical crowns.
- Three-unit or larger anatomical bridges.
- Structures supported on implants.
- Foundations for bridges.
- Crown substructures.
- Implant-supported structures.
Development techniques: (Depending on the selected disc)
- Glazing.
- Characterization with paints.
- Infiltration.
- Veneering.
Advantages and benefits:
- Minimal grinding of tooth tissues, thanks to the possibility of making a restoration with a small wall thickness.
- Minimally invasive crowns.
- Particularly suitable for long span bridges due to its excellent strength of 1200 MPa.
Packaging:
- 1 piece
IPS e.max ZirCAD MO 98.5x10mm
IPS e.max ZirCAD MO was developed for use in the classical veneering technique. Even discolored preparations and metal cores can be effectively hidden due to the increased opacity of the material. IPS e.max ZirCAD MO enables the fabrication of custom-made, highly esthetic restorations.
Indications:
- Crown substructures.
- Foundations for bridges.
- Structures supported on implants.
Development techniques:
- Veneering.
- Veneering with the pressing technique.
- CAD-on.
Advantages and benefits:
- Effectively masks heavily discolored stumps and metal crown-root inlays.
- Minimal grinding of tooth tissues, thanks to the possibility of making a restoration with a small wall thickness.
- Particularly suitable for long span bridges due to its excellent strength of 1150 MPa.
Packaging:
- 1 piece
IPS e.max ZirCAD MO 98.5x20mm
IPS e.max ZirCAD MO - classic disk
IPS e.max ZirCAD MO was developed for use in the classical veneering technique. Even discolored preparations and metal cores can be effectively hidden due to the increased opacity of the material. IPS e.max ZirCAD MO enables the fabrication of custom-made, highly esthetic restorations.
Indications:
- Crown substructures.
- Foundations for bridges.
- Structures supported on implants.
Development techniques:
- Veneering.
- Veneering with the pressing technique.
- CAD-on.
Advantages and benefits:
- Effectively masks heavily discolored stumps and metal crown-root inlays.
- Minimal grinding of tooth tissues, thanks to the possibility of making a restoration with a small wall thickness.
- Particularly suitable for long span bridges due to its excellent strength of 1150 MPa.
Packaging:
- 1 piece
IPS e.max ZirCAD MO 98.5x25mm
IPS e.max ZirCAD MO - classic disk
IPS e.max ZirCAD MO was developed for use in the classical veneering technique. Even discolored preparations and metal cores can be effectively hidden due to the increased opacity of the material. IPS e.max ZirCAD MO enables the fabrication of custom-made, highly esthetic restorations.
Indications:
- Crown substructures.
- Foundations for bridges.
- Structures supported on implants.
Development techniques:
- Veneering.
- Veneering with the pressing technique.
- CAD-on.
Advantages and benefits:
- Effectively masks heavily discolored stumps and metal crown-root inlays.
- Minimal grinding of tooth tissues, thanks to the possibility of making a restoration with a small wall thickness.
- Particularly suitable for long span bridges due to its excellent strength of 1150 MPa.
Packaging:
- 1 piece
Realloy BC - CoCr milling disc 98.5x8mm
Milling disc from the German company Realloy:
- 98.5 mm diameter compatible with most milling machines.
- Veneering alloy with ceramics.
Technical data:
- Hardness (HV) 290
- Elongation (%) 8
- Tensile strength (MPa) 560
- The yield point (MPa) at elongation 0.2% 400
- Modulus of elasticity (GPa) approx. 195
- Comp. thermal expansion (20'- 6000c) (10K) 14.1-14.4
- Density (g / cm ') 8.4
Composition:
- Co (%) 61.7
- Cr |%) 27.8
- Si (%) 1.6
- In (%) 8.5
- other (%) <1
Package:
1 piece
Renfert-Turbine Silent Compact (extractor motor)
Replacement motor (230V) for Silent Compact and Silent Compact CAM.
Renfert catalog number 900037226
Packaging:
- 1 piece
Roland Coolant ZAW-1000D - coolant additive
Coolant additive for wet milling machines.
Advantages:
- Keeps drill bits cool during the milling process.
- Helps extend drill bit life.
Application:
- Pour the coolant additive into the coolant tank and mix it with distilled water.
- Refer to the owner's manual for instructions on adding the correct coolant to water ratio.
Packaging:
- 1000 ml
Zirconium ZZ Explore Esthetic 95x20mm
Zirconium Explore Esthetic new generation zircon, up to 5 layers of multilayer translucency. Thanks to the increased strength in the gingival area and increased translucency in the enamel area, it allows for a very wide range of applications, while maintaining high aesthetics of the restoration.
parameters:
- Strength after sintering 727MPa - 1000MPa
- Translucency 47% - 48.8%
- Sintering temperature 1480 °C
Application:
- foundations.
- crowns.
- 3-point bridges.
- bridge with overhang (not recommended for patients with bruxism).
Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.
Packaging:
- 1 piece
Zirconium ZZ Explore Esthetic 95x16mm
Zirconium Explore Esthetic new generation zircon, up to 5 layers of multilayer translucency. Thanks to the increased strength in the gingival area and increased translucency in the enamel area, it allows for a very wide range of applications, while maintaining high aesthetics of the restoration.
parameters:
- Strength after sintering 727MPa - 1000MPa
- Translucency 47% - 48.8%
- Sintering temperature 1480 °C
Application:
- foundations.
- Crowns.
- 3-point bridges.
- Overhang bridge (not recommended for patients with bruxism)
Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.
Packaging:
- 1 piece
MESA - Magnum Solare Co-Cr disc 98.5x10mm PROMOTION
MAGNUM SOLARE 98.5x10mm - Co-Cr disc for milling ceramic veneered crowns and bridges.
Benefits:
- Less hardness 255 HV10, which facilitates milling and reduces wear of cutters.
- Pure oxidation
- Thermal expansion coefficient suitable for most ceramics.
Composition in%:
- Every 66
- Cr 27
- Mo 6
- Si, Mn 1
Technical data:
- Melting point 1307 - 1417 C
- Thermal expansion coefficient - (25-500 C) 14.3 x10 - 6K- 1 - (25- 600C) 14.5x10- 6K- 1
- Density - 8.4 g / cm3
- Vickers hardness 255 HV10
- Elongation at break 11%
- Unit yield point - 395 Mpa
- Modulus of elasticity 233 GPa
Package:
1 piece
Mesa-Magnum Solare disc Co-Cr 98.5x12mm PROMOTION
MAGNUM SOLARE 98.5x12mm - Co-Cr disc for milling ceramic veneered crowns and bridges.
Benefits:
- Less hardness 255 HV10, which facilitates milling and reduces wear of cutters.
- Pure oxidation
- Thermal expansion coefficient suitable for most ceramics.
Composition in%:
- Every 66
- Cr 27
- Mo 6
- Si, Mn 1
Technical data:
- Melting point 1307 - 1417 C
- Thermal expansion coefficient - (25-500 C) 14.3 x10 - 6K- 1 - (25- 600C) 14.5x10- 6K- 1
- Density - 8.4 g / cm3
- Vickers hardness 255 HV10
- Elongation at break 11%
- Unit yield point - 395 Mpa
- Modulus of elasticity 233 GPa
Package:
1 piece
Mesa- Magnum Solare disc Co-Cr 98.5x13.5mm PROMOTION
MAGNUM SOLARE 98.5x13.5mm - Co-Cr disc for milling ceramic veneered crowns and bridges.
Benefits:
- Less hardness 255 HV10, which facilitates milling and reduces wear of cutters.
- Pure oxidation
- Thermal expansion coefficient suitable for most ceramics.
Composition in%:
- Every 66
- Cr 27
- Mo 6
- Si, Mn 1
Technical data:
- Melting point 1307 - 1417 C
- Thermal expansion coefficient - (25-500 C) 14.3 x10 - 6K- 1 - (25- 600C) 14.5x10- 6K- 1
- Density - 8.4 g / cm3
- Vickers hardness 255 HV10
- Elongation at break 11%
- Unit yield point - 395 Mpa
- Modulus of elasticity 233 GPa
Package:
1 piece
MESA - Magnum Solare Co-Cr disc 98.5x15mm PROMOTION
MAGNUM SOLARE 98.5x15mm - Co-Cr disc for milling ceramic veneered crowns and bridges.
Benefits:
- Less hardness 255 HV10, which facilitates milling and reduces wear of cutters.
- Pure oxidation
- Thermal expansion coefficient suitable for most ceramics.
Composition in%:
- Every 66
- Cr 27
- Mo 6
- Si, Mn 1
Technical data:
- Melting point 1307 - 1417 C
- Thermal expansion coefficient - (25-500 C) 14.3 x10 - 6K- 1 - (25- 600C) 14.5x10- 6K- 1
- Density - 8.4 g / cm3
- Vickers hardness 255 HV10
- Elongation at break 11%
- Unit yield point - 395 Mpa
- Modulus of elasticity 233 GPa
Package:
1 piece
Mesa-Magnum Solare Co-Cr 98.5x18mm PROMOTION
MAGNUM SOLARE 98.5x18mm - Co-Cr disc for milling ceramic veneered crowns and bridges.
Benefits:
- Less hardness 255 HV10, which facilitates milling and reduces wear of cutters.
- Pure oxidation
- Thermal expansion coefficient suitable for most ceramics.
Composition in%:
- Every 66
- Cr 27
- Mo 6
- Si, Mn 1
Technical data:
- Melting point 1307 - 1417 C
- Thermal expansion coefficient - (25-500 C) 14.3 x10 - 6K- 1 - (25- 600C) 14.5x10- 6K- 1
- Density - 8.4 g / cm3
- Vickers hardness 255 HV10
- Elongation at break 11%
- Unit yield point - 395 Mpa
- Modulus of elasticity 233 GPa
Package:
1 piece
Circotrim eraser for processing zirconia before sintering
Highly efficient CIRCOTRIM eraser for processing zirconia before the sintering process.
Characteristics:
- Due to its high abrasion and low temperature emission, the darker area is perfect for reducing connectors from zirconium crowns.
- The lighter area with less abrasion is used to precisely smooth the area after the removed connector.
- Maximum optimal use speed: 15000 rpm
Packaging:
- 1 piece
Zirconium Explore Esthetic 98x20mm
Zirconium Explore Esthetic new generation zircon, up to 5 layers of multilayer translucency. Thanks to the increased strength in the gingival area and increased translucency in the enamel area, it allows for a very wide range of applications, while maintaining high aesthetics of the restoration.
parameters:
- Strength after sintering 727MPa - 1000MPa
- Translucency 47% - 48.8%
- Sintering temperature 1480 °C
Application:
- foundations.
- Crowns.
- 3-point bridges.
- Bridge with overhang (not recommended for patients with bruxism).
Zirconium is a new line of materials based on zirconia designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.
Packaging:
- 1 piece
Zirconium HT ZZ 95x25mm
Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.
HT - High translucent
Characteristics:
- Recommended for foundations.
- Very high strength.
Destiny:
- Cap
- Bridges
- 3-4 point bridge
- Suspended bridge (not recommended for patients with bruxism).
- Inlay bridge (not recommended for patients with bruxism).
- Maryland bridge (not recommended for patients with bruxism).
- Telescopic crown.
- Individual connectors.
Chemical composition:
- ZrO2 + HfO2 + Y2O3 - >99%
- Y2O3 - 4.5%~6%
- HfO2 - <5%
- Al2O3 - <0.5%
- Other oxides - <0.5%
Physical properties:
Density before sintering - 3.1+0.5g/cm3
Density after sintering - 6.08+0.01g/cm3
CTE (25- 500°C) 10.05+1.0×10- 6K- 1
Strength after sintering - 1300 Mpa
Percentage of monoclinic accelerated aging (%) - <15%
Average transparency - 39%
Cytotoxicity test - 0
Radioactivity - <0.1Bq/g
Sintering temperature - 1530°C
Packaging:
- 1 piece
Easy blank wax 98.5x14mm Milling wax
Renfert Easy Wax is a specially composed formula ensuring precise milling with exceptionally smooth surfaces and strong edge stability due to the high degree of material homogeneity.
Renfert catalog number 7700014
Advantages:
- Particularly suitable for all-ceramic restorations because the wax burns off without leaving any residue.
- Reliable milling process thanks to small milled chips that do not stick to the cutter or workpiece surface.
- This allows, among other things, perfect fit and surface quality for the final restoration.
Packaging:
- 1 piece.
Easy blank wax 98.5x20mm Milling wax
Renfert Easy Wax is a specially composed formula ensuring precise milling with exceptionally smooth surfaces and strong edge stability due to the high degree of material homogeneity.
Renfert catalog number 7700020
Advantages:
- Particularly suitable for all-ceramic restorations because the wax burns off without leaving any residue.
- Reliable milling process thanks to small milled chips that do not stick to the cutter or workpiece surface.
- This allows, among other things, perfect fit and surface quality for the final restoration.
Packaging:
- 1 piece.
PoliDent PMMA ML disc for milling 98 X16mm
The PMMA Multilayer discs are recommended for the fabrication of provisional crowns and bridges and for the verification of the bridge on the working model or the mouth before the final milling process of the zirconium oxide restoration. Available in the 98mm open system
Technical data:
- Extremely easy to process
- Exact color matching
- Flexural strength: 114 MPa
- Vickers hardness: 26 HV
- Modulus E: 2771 MPa
- Residual monomer <1%
Package:
1 piece
Exocad Bar module (bars)
Exocad Bar Module.
Quick and intuitive design of standard beams, and the creation of individual, complex projects.
Intelligent software for designing dental structures is translated into Polish.
Package:
1 pc complementary software.
Exocad Smile Creator Module
Exocad Smile Creator Module; - The module allows you to perform digital face analysis to create the perfect smile for each patient, taking into account their individual anatomy. - Smile Creator module only works with TruSmile module.
Intelligent software for designing dental structures is translated into Polish.
Package:
1 pc complementary software.
Exocad Provisional module (temporary crowns)
Exocad Provisional Module:
- Intended for the design of individual temporary crowns and bridges. The shape can be copied from the original anatomy, or a tooth library can be used.
Intelligent software for designing dental structures is translated into Polish.
Package:
1 pc complementary software.
Exocad Full Denture module (full dentures)
Exocad Full Denture Module A modern solution for traditional acrylic dentures. The program enables digital model analysis and, on its basis, presents the suggested tooth positioning. The prepared prosthesis can be printed in a 3D printer, milled or both methods can be used.
Intelligent software for designing dental structures is translated into Polish.
Package:
1 pc complementary software.
Exocad Tru Smile module [smile visualization2]
Exocad Tru Smile module [smile visualization2]
Realistic project rendering and photo realistic graphics available at every stage of the project allow you to better illustrate the final effect of the work. The TruSmile technology can be successfully used by dentists for marketing purposes.
Intelligent software for designing dental structures is translated into Polish.
Package:
1 pc complementary software.
Exocad Tooth Library module (tooth library)
Exocad Tooth Library module {tooth library]
An additional rich library of beautiful natural teeth includes:
- 61 sets of incisors of the upper arch
- 19 sets of mandibular incisors
- 19 sets of upper arch side teeth
- 19 sets of mandibular posterior teeth
Intelligent software for designing dental structures is translated into Polish.
Package:
1 pc complementary software.
Zirconium ZZ Explore Functional 95x16mm
Zirconium Explore Functional new generation zircon, up to 5 layers of multilayer translucency. Thanks to the increased strength in the gingival area and increased translucency in the enamel area, it allows for a very wide range of applications, while maintaining high aesthetics of the restoration.
parameters:
- Strength after sintering 1027MPa - 1300MPa
- Translucency 43% - 46.6%
- Sintering temperature 1480 °C.
Application:
- foundations.
- crowns.
- 3-point bridges.
- Multi-point bridges.
- Bridge with overhang (not recommended for patients with bruxism).
Zirconium is a new line of materials based on zirconia designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.
Packaging:
- 1 piece
Mesa - Magnum Hyperone Ti disc 98.5x12mm PROMOTION
MESA MAGNUM HYPERONE Titanium-based milling discs for Mesa 98.5mm open systems.
They are characterized by high biocompatibility. Manufactured in accordance with ASTM F136.
Percentage chemical composition:
- Ti 90%
- Al 6%
- V 4%
- Fe others
The minimum thickness of the structure is 0.3mm for simple structures and 0.5mm for more complicated cases or for patients with bruxism. Avoid sharp angles. Separate the milled structures from the disc with tungsten carbide drill bits or titanium grinding wheels. Clean with acetone or bioalcohol to eliminate any oiliness. After finishing the treatment, the product should be sandblasted with aluminum oxide from 110 to 150 microns under a maximum pressure of 2-3 bar, and then steam cleaned. After cleaning the product, handle it with forceps.
Physical and Mechanical Properties:
- Density: 4.426 g / cm3
- Melting point: 1605-1660 ° C
- Melting point: 1710 ° C
- Unit yield point: 880 MPa
- Percent elongation at break: 14%
- Modulus of elasticity: 114 GPa
- Vickers hardness: 312 HV10
Package:
1 piece.
Mesa - Magnum Hyperone Ti disc 98.5x10mm PROMOTION
MESA MAGNUM HYPERONE Titanium-based milling discs for Mesa 98.5mm open systems.
They are characterized by high biocompatibility. Manufactured in accordance with ASTM F136.
Percentage chemical composition:
- Ti 90%
- Al 6%
- V 4%
- Fe others
The minimum thickness of the structure is 0.3mm for simple structures and 0.5mm for more complicated cases or for patients with bruxism. Avoid sharp angles. Separate the milled structures from the disc with tungsten carbide drill bits or titanium grinding wheels. Clean with acetone or bioalcohol to eliminate any oiliness. After finishing the treatment, the product should be sandblasted with aluminum oxide from 110 to 150 microns under a maximum pressure of 2-3 bar, and then cleaned with steam. After cleaning the product, handle it with forceps.
Physical and Mechanical Properties:
- Density: 4.426 g / cm3
- Melting point: 1605-1660 ° C
- Melting point: 1710 ° C
- Unit yield point: 880 MPa
- Percentage elongation at break: 14%
- Modulus of elasticity: 114 GPa
- Vickers hardness: 312 HV10
Package:
- 1 piece.
Mesa - Magnum Hyperone Ti disc 98.5x13.5mm PROMOTION
MESA MAGNUM HYPERONE Titanium-based milling discs for Mesa 98.5mm open systems.
They are characterized by high biocompatibility. Manufactured in accordance with ASTM F136.
Percentage chemical composition:
- Ti 90%
- Al 6%
- V 4%
- Fe others
The minimum thickness of the structure is 0.3mm for simple structures and 0.5mm for more complicated cases or for patients with bruxism. Avoid sharp angles. Separate the milled structures from the disc with tungsten carbide drill bits or titanium grinding wheels. Clean with acetone or bioalcohol to eliminate any oiliness. After finishing the treatment, the product should be sandblasted with aluminum oxide from 110 to 150 microns under a maximum pressure of 2-3 bar, and then cleaned with steam. After cleaning the product, handle it with forceps.
Physical and Mechanical Properties:
- Density: 4.426 g / cm3
- Melting point: 1605-1660 ° C
- Melting point: 1710 ° C
- Unit yield point: 880 MPa
- Percentage elongation at break: 14%
- Modulus of elasticity: 114 GPa
- Vickers hardness: 312 HV10
Package:
- 1 piece.
Mesa - Magnum Hyperone Ti disc 98.5x15mm PROMOTION
MESA MAGNUM HYPERONE Titanium-based milling discs for Mesa 98.5mm open systems.
They are characterized by high biocompatibility. Manufactured in accordance with ASTM F136.
Percentage chemical composition:
- Ti 90%
- Al 6%
- V 4%
- Fe others
The minimum thickness of the structure is 0.3mm for simple structures and 0.5mm for more complicated cases or for patients with bruxism. Avoid sharp angles. Separate the milled structures from the disc with tungsten carbide drill bits or titanium grinding wheels. Clean with acetone or bioalcohol to eliminate any oiliness. After finishing the treatment, the product should be sandblasted with aluminum oxide from 110 to 150 microns under a maximum pressure of 2-3 bar, and then steam cleaned. After cleaning the product, handle it with forceps.
Physical and Mechanical Properties:
- Density: 4.426 g / cm3
- Melting point: 1605-1660 ° C
- Melting point: 1710 ° C
- Unit yield point: 880 MPa
- Percent elongation at break: 14%
- Modulus of elasticity: 114 GPa
- Vickers hardness: 312 HV10
Package:
1 piece.
Zirconium milling wax gray 98x25mm
Synthetic milling wax, very hard, non-sticky. It guarantees high precision of work. Size 98x25mm
Package:
- 1 piece
UGIN e.ON sinter base sintering furnace
The e.ON zirconium sintering furnace is a compact, high-performance furnace. Equipped with 4 heating rods, it is a high-performance stove. Includes automatic door locking to avoid muff damage due to thermal shock. Technical Specifications:
- 7" high resolution color touch screen
- Maximum temperature 1600°C
- Maximum heating rate up to 40°C/minute
- 4 heating elements (rods) in MoSi2 (molybdenum disilicide)
- 1 sintering tray with lid and zircon pearls (capacity up to 20 pieces)
- 40 free programs with 40 possible steps for each program
- Visualization of graphic cycles
- 4 display languages: French, English, Italian, Spanish
- Muff size: 110mm x 110mm x 110mm
- External dimensions (height, width, depth): 540mm x 400mm x 450mm
- Weight: 58 kg
- Maximum power consumption: 1830 kW
- Supply voltage: 230V (50/60 Hz)
Zirconium ST Color 98x20
Zirconium is a new line of zirconium oxide materials designed for use in cad / cam technology. Zirconium products have SFDA, ISO13485, CE and FDA certificates. Due to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is an element characteristic of high-quality zirconium discs.
ST-Super translucent
Characteristics:
- recommended for fully anatomical work in the posterior region
Destiny:
- Cap
- Bridges
- 3- 4 point bridge
- Bridge with an evidence (not recommended for patients with bruxism)
- Bridge on inlays (not recommended for patients with bruxism)
- Maryland bridge (not recommended for patients with bruxism)
- Telescopic crown
- Individual connectors
Chemical composition:
- ZrO2 + HfO2 + Y2O3> 98%
- Fe2O3 <0.3%
- Pr2O3 <0.3%
- Er2O3 <0.3%
- Other oxides <0.5%.
Physical properties:
- Density before sintering - 3.1 + 0.5g / cm3
- Density after sintering - 6.08 + 0.01 g / cm3
- CTE (25- 500 ° C) - 10.05 + 1.0 × 10- 6K- 1
- Strength after sintering - 1100 Mpa
- Percentage of monoclinic phase aging (%) <15%
- Cytotoxicity testing - 0 Level
- Radioactivity <0.1Bq / g
- Sintering temperature 1530 ° C
Package:
- 1 piece.
Zirconium ZZ Explore Functional 95x20mm
Zirconium Explore Functional new generation zircon, up to 5 layers of multilayer translucency. Thanks to the increased strength in the gingival area and increased translucency in the enamel area, it allows for a very wide range of applications, while maintaining high aesthetics of the restoration.
parameters:
- Strength after sintering 1027MPa - 1300PMa
- Translucency 43% - 47-6.6%
- Sintering temperature 1480 °C.
Application:
- foundations.
- Crowns.
- 3-point bridges.
- Multi-point bridges.
- Bridge with overhang (not recommended for patients with bruxism).
Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconia discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.
Packaging:
- 1 piece
Denseo HIQ-Bonder 3g
Denseo HIQ-Bonder.
Zirconium bond facilitates the application and firing of ceramics.
Package:
- 3g
Materials and device for CAD/CAM technology used in prosthetics.
Our offer includes a wide selection of materials and devices for use in CAD/CAM technology. Probably the most popular material for CAM milling in prosthetics are zirconium oxide discs, commonly called zirconium discs or milling blocks . Zirconium oxide is a ceramic material, without the addition of glass, made of very small grains. The quality of the zirconium oxide powder grains determines whether the zirconium block will fulfill its purpose.
The advantages and properties of zirconium discs are mainly high crushing resistance, crack resistance, fine-grained structure, biocompatibility and biocompatibility. Additionally, it guarantees high tightness of the crown and precise adherence to natural teeth. It does not cause any allergies in patients. Thanks to their abrasion resistance, zirconium teeth can be used for a very long time, combining quality with a very high aesthetic effect.
We also offer PMMA blocks . PMMA is a popular polymethyl methacrylate material. It is a resin that is perfect for making crowns and bridges for temporary restorations. The great advantage of the material is its biodegradability, thanks to which it burns without residue. Additionally, PMMA has high bending strength >80MPa, natural fluorescence and high transparency. It is very easy to mill, with minimal wear on the cutters. Its cost is approximately PLN 80 for a disc in any Vita color and regardless of height, from which up to 30 points can be cut - this makes it one of the favorite materials of prosthetists.
Acrylic resin has great potential, which is why it is constantly being improved. PMMA multilayer is now standard, which ensures smoother transitions of layers of a given color.
Our offer includes, among others:
- Milling blocks and discs made of Zirconium zirconium oxide
- Bond for zirconium,
- Hyramic,
- IPS e.max ZirCAD,
- Ceramic-composite discs,
- Metal milling discs,
- PEEK discs,
- PMMA discs,
- PMMA discs for casting,
- Lithium disilicate discs,
- Plaster discs,
- Wax discs
- Processing materials
- Software
- Scanning preparations
- Liquids for dyeing zirconium
- Devices - prosthetic milling machines and scanners
- Drills