Kerox Dental zirconia blocks are made of Yttria material, with a perfectly stabilized structure, produced by a Japanese industry leader.

HT - strength 1350MPa, application: full-contour crowns, substructures, inlays/onlays, cut-back crowns

HS - strength 1443 MPa, application: foundations

HTML - strength 1389 MPa, application: full-contour crowns, bridges (max 3 points)

UHT - strength 1175 MPa, application: highly aesthetic crowns in the anterior section

Packaging:

1 piece.

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Synthetic milling wax, very hard, non-sticky. It guarantees high precision of work. Size 98x16mm

Package:

• 1 piece

Synthetic milling wax, very hard, non-sticky. It guarantees high precision of work. Size 98x18mm

Package:

• 1 piece

Synthetic milling wax, very hard, non-sticky. It guarantees high precision of work. Size 98x20mm

Package:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

MAGNUM SPLENDIDUM 98x8mm - Co-Cr disc for milling ceramic veneered crowns and bridges.

Benefits:

• Excellent polishability
• Thermal expansion coefficient suitable for most ceramics.

Technical data:

• Melting point 1308 \ u2013 1384 C.
• Thermal expansion coefficient - (25-500 C) 14.2 x10 - 6K- 1 \ u2013 (25- 600C) 14.4x10- 6K- 1
• Density \ u2013 8.5g / cm3
• Vickers hardness 273 HV10
• Elongation percentage at break 16%
• Unit yield strength \ u2013 360 Mpa
• Modulus of elasticity 183 GPa

Package:

• 1 piece

Zirconium is a new line of materials based on zirconia designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconia discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

ST-Super translucent

Characteristics:

• Recommended for works in full anatomical shape in the posterior section.

Destiny:

• Cap.
• Bridges.
• 3-4 point bridge.
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%.

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic aging phase (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconia designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconia discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

ST-Super translucent

Characteristics:

• Recommended for works in full anatomical shape in the posterior section.

Destiny:

• Cap.
• Bridges.
• 3-4 point bridge.
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%.

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic aging phase (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconia designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconia discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

ST-Super translucent

Characteristics:

• Recommended for works in full anatomical shape in the posterior section.

Destiny:

• Cap.
• Bridges.
• 3-4 point bridge.
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%.

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic aging phase (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%

Packaging:

• 1 piece

Milling cutters adapted to Yenadent milling machines. Head diameter 1.0mm and 2.0mm. Chuck diameter 4mm for milling Co Cr.

Packaging:

• 1 piece

Marmoplast BioStar:

• Easy-to-mill gypsum disc with high edge stability, made of super-hard gypsum enriched with plastic. designed for milling plaster models.

Dimensions:

• diameter 98.5mm
• height 30mm

Package:

• 1 piece

Zirconium is a new line of materials based on zirconia designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconia discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

ST-Super translucent

Characteristics:

• Recommended for works in full anatomical shape in the posterior section.

Destiny:

• Cap.
• Bridges.
• 3-4 point bridge.
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%.

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic aging phase (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconia designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconia discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

ST-Super translucent

Characteristics:

• Recommended for works in full anatomical shape in the posterior section.

Destiny:

• Cap.
• Bridges.
• 3-4 point bridge.
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%.

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic aging phase (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%

Packaging:

• 1 piece

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

COPRA PEEK offers a unique set of properties:

• A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases the possibilities in the case of design
• High strength-to-weight ratio
• High resistance, the material does not lose its properties even after many years of use
• Radio-translucency X-ray compatible

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to its low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

COPRA PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases design possibilities - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio transparency compatible with X-ray

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to its low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

Copra PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases the possibilities in designing - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio translucency - compatible with X-ray

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to its low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

COPRA PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases design possibilities - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio transparency compatible with X-ray

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to its low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

COPRA PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases design possibilities - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio transparency compatible with X-ray

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to its low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

COPRA PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases design possibilities - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio transparency compatible with X-ray

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to its low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

COPRA PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases design possibilities - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio transparency compatible with X-ray

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to its low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

COPRA PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases design possibilities - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio transparency compatible with X-ray

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

Copra PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases design possibilities - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio transparency compatible with X-ray

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to its low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

COPRA PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases design possibilities - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio transparency compatible with X-ray

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to its low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

COPRA PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases design possibilities - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio transparency compatible with X-ray

Package:

• 1 piece.

CopraPeek The very high biocompatibility of this high-tech resin makes it the best choice for prosthetic restorations, primary, secondary and tertiary structures, metal-free superstructures, and crown and bridge restorations. CopraPeek offers the best patient comfort thanks to its minimal weight and extremely low thermal conductivity. Available in the shades - dentine A2 (medium / medium) - gray (light) - pink (gingival shade) "Rosa". CopraPeek is highly plaque resistant, antiallergic and tasteless.

Benefits:

• Flexible material, tasteless
• Natural dentine color A2 (medium), light gray (light) and pink (rose)
• High wearing comfort due to its low weight
• It does not contain allergens and is therefore highly biocompatible
• Very smooth surface
• Recommended for the fabrication of crown foundations, bridges, denture bases, metal-free frameworks and superstructures, as well as primary, secondary and tertiary structures.

Application:

• Anterior and posterior crown and bridge frameworks as three-point structures (maximum 1 span)
• Complete and partial removable dentures and auxiliary dentures
• beams

COPRA PEEK offers a unique set of properties:

A polymer characterized by high flexibility confirmed in clinical trials. Flexible structure similar in properties to human bones - hard but flexible, thanks to which it increases design possibilities - High strength to weight ratio - High resistance, the material does not lose its properties even after many years of use - Radio transparency compatible with X-ray

Package:

• 1 piece.

Exocad Implant Module For the design of individual abutments and suprastructures in one CAD session, without the need to re-scan the model with embedded abutments, it guarantees the perfect axis of the structure on the implant. Extensive library of implant systems in the package.

Intelligent software for designing dental structures is translated into Polish.

Package:

1 pc complementary software.

PS e.max CAD are lithium disilicate glass ceramic blocks for CAD/CAM technology. The manufacturing process guarantees completely homogeneous blocks. The pre-crystallized (blue) block can be easily developed in a CAD/CAM device. The block in the pre-crystallized state has a characteristic white color that goes through a blue shade to a blue-gray tone. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is thus comparable to other glass ceramic blocks currently available on the market. After the restoration has been cut out of the blocks, it is crystallized in the Ivoclar Vivadent ceramic furnace (e.g. Programat CS). The crystallization process is easy to carry out and, unlike other CAD/CAM systems, restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at 840 °C causes changes in the structure of the ceramics, followed by the growth of lithium disilicate crystals. The resulting densification of 0.2% is already predicted in the CAD software and taken into account when cutting the restoration. Thanks to changes in the structure, the strength of the material increases to 360 MPa and it obtains the appropriate optical properties. IPS e.max CAD blocks are naturally bright. Thanks to the translucency and variety of shades, fully anatomical restorations can be easily fabricated with this glass ceramic.

Application:

• Blocks of medium opacity characterized by ideal properties to hide discoloration of pillars. Particularly indicated for the fabrication of frameworks in a reduced anatomical shape intended for veneering and implant-supported restorations.

Dimensions C 14:

• Width 12.4mm

• Length 14.5mm

• Height 18mm

Packaging:

5pcs/pack

Extract V10 FULL DENTAL CAD/CAM SOLUTION.

Advantages:

• The easily removable dust container ensures absolute cleanliness.
• Brushless motor.
• Reduced operating noise ensures a quiet working environment.
• Intelligent connection system with the P53 milling machine.

Technical data:

• Dimensions 240X530X443(mm)
• Weight 20 kg
• Rated voltage 220V±10%
• Rated frequency 50 Hz
• Air volume 2600 l/m
• Air pressure 20KPA
• Filtering 0.3-1um
• Cleaning mode - filter self-cleaning.
• Noise level 70±2

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of zirconium oxide materials designed for use in cad / cam technology. Zirconium products have SFDA, ISO13485, CE and FDA certificates. Due to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is an element characteristic of high-quality zirconium discs.

ST-Super translucent

Characteristics:

• recommended for fully anatomical work in the posterior region

Destiny:

• Cap
• Bridges
• 3- 4 point bridge
• Bridge with an evidence (not recommended for patients with bruxism)
• Bridge on inlays (not recommended for patients with bruxism)
• Maryland bridge (not recommended for patients with bruxism)
• Telescopic crown
• Individual connectors

Chemical composition:

• ZrO2 + HfO2 + Y2O3> 98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%.

Physical properties:

• Density before sintering - 3.1 + 0.5g / cm3
• Density after sintering - 6.08 + 0.01 g / cm3
• CTE (25- 500 ° C) - 10.05 + 1.0 × 10- 6K- 1
• Strength after sintering - 1100 Mpa
• Percentage of monoclinic phase aging (%) <15%
• Cytotoxicity testing - 0 Level
• Radioactivity <0.1Bq / g
• Sintering temperature 1530 ° C

Package:

1 piece.

Exocad Partial Denture Module Designing frameworks without duplicating the model, automatic blocking of undercuts. Extensive selection of clamps, supports, latches, etc. An easy way to design and model new elements.

Intelligent software for the design of dental structures is translated into Polish.

Packaging:

1 pc supplementary software.

Exocad Model Creator Module

It allows you to digitally make models based on impressions scans or data from intraoral scanners. - split models - monolithic models with movable posts - models with replicas of implants

Intelligent software for designing dental structures is translated into Polish.

Package:

1 pc complementary software.

PMMA material for temporary work.

Packaging:

• 1 piece

PMMA materials for temporary work.

Packaging:

• 1 piece

PMMA material intended for temporary works.

Packaging:

• 1 piece

PMMA material for temporary work.

Packaging:

• 1 piece

PMMA material for temporary work.

Packaging:

• 1 piece

PMMA material intended for temporary work.

Package:

• 1 piece

PMMA material intended for temporary work.

Package:

• 1 piece

Synthetic milling wax, very hard, non-sticky. It guarantees high precision of work. Size 95x16mm

Package:

• 1 piece

Synthetic milling wax, very hard, non-sticky. It guarantees high precision of work. Size 95x20mm

Package:

• 1 piece

Synthetic beading wax.

Advantages:

• Very hard, not sticky.
• It guarantees high precision of work.
• Size 89x71x16mm.

Packaging:

• 1 piece

Synthetic milling wax, very hard, non-sticky. It guarantees high precision of work. Size 89 x 71 x 20mm

Package:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

ST-Super translucent MT

Characteristics:

• Recommended for works in full anatomical shape.
• Super translucent.
• Available in 7 colors.
• Multilayer (layered).

Destiny:

• Cap.
• Bridges.
• 3-4 point bridge.
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 >98%
• Fe2O3 <0.3%
• Pr2O3 <0.3%
• Er2O3 <0.3%
• Other oxides <0.5%.

Physical properties:

• Density before sintering - 3.1+0.5g/cm3
• Density after sintering - 6.08+0.01g/cm3
• CTE (25- 500°C) - 10.05+1.0×10- 6K- 1
• Strength after sintering - 1300 Mpa
• Percentage of monoclinic aging phase (%) <15%
• Cytotoxicity Test - 0 Level
• Radioactivity <0.1Bq/g
• Sintering temperature 1530°C
• Translucency 43%.

Packaging:

• 1 piece

Zirconium AG ST Multilayered B1 89-71-14mm short shelf life.

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconia designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

• HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap.
• Bridges.
• 3-4 point bridge.
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece

Zirconium is a new line of materials based on zirconium oxide designed for use in cad/cam technology. Zirconium products are SFDA, ISO13485, CE and FDA certified. Thanks to the two-stage production process: axial pressing and "cold" isostatic pressing, zirconium zirconium discs are characterized by a homogeneous structure, which is a characteristic element of high-quality zirconia discs.

HT - High translucent

Characteristics:

• Recommended for foundations.
• Very high strength.

Destiny:

• Cap
• Bridges
• 3-4 point bridge
• Suspended bridge (not recommended for patients with bruxism).
• Inlay bridge (not recommended for patients with bruxism).
• Maryland bridge (not recommended for patients with bruxism).
• Telescopic crown.
• Individual connectors.

Chemical composition:

• ZrO2 + HfO2 + Y2O3 - >99%
• Y2O3 - 4.5%~6%
• HfO2 - <5%
• Al2O3 - <0.5%
• Other oxides - <0.5%

Physical properties:

• Density before sintering - 3.1+0.5g/cm3

• Density after sintering - 6.08+0.01g/cm3

• CTE (25- 500°C) 10.05+1.0×10- 6K- 1

• Strength after sintering - 1300 Mpa

• Percentage of monoclinic accelerated aging (%) - <15%

• Average transparency - 39%

• Cytotoxicity test - 0

• Radioactivity - <0.1Bq/g

• Sintering temperature - 1530°C

Packaging:

• 1 piece