Otoflash G171-6 N2-Connecting kit

Connection and connector for gas cylinder (Nitrogen).

Packaging:

• 1 pc.

AnyCubic Wash & Cure Machine 3.0 (4L)

The washer is compatible with most LCD 3D printers including Elegoo Mars, Phrozen Sonic, and other printers.

Compared to Wash & Cure 2.0, the curing size has increased by 15% and the capacity of the cleaning basket by as much as 100% (up to 3L).

Advantages:

• large capacity of 3l basket and 4l bucket;
• large cleaning work area in the basket 165 x 100 x 180 mm;
• the cleaning and curing mode is easily accessible on the panel, the knob sets the working time to max. 30 minutes;
• Thanks to the innovative FlexiCure gooseneck lamp, UV light can reach every spot;

Technical data:

• cleaning area in basket: 165 x 100 x 180 mm;
• cleaning area in basket (suspended): 165 x 100 x 165 mm;
• curing area: 160x180 mm;
• device size: 290x270x479 mm;
• gooseneck light: Max. height 285 mm;
• time selection range: 1 - 30 min;
• bucket capacity: 4L;
• basket capacity: 3L;
• UV light wavelength: 405 nm;
• weight: 2.7 kg.

Packaging:

• 1pc

AnyCubic Wash & Cure 3 Plus (7.6L)

Device with a large capacity of 7.6 L.

It allows you to wash your prints in two ways - using a basket or in hanging mode, without removing them from the build platform.

Advanced features such as adjustable UV lighting time and intensity ensure efficient and even light distribution on the print.

Advantages:

• large capacity 7.6l;
• maximum working area is 228x128x300 mm;
• Thanks to the innovative FlexiCure gooseneck lamp, UV light can reach every spot;
• The touch screen makes it easy to control the print washing and curing processes.

Technical data:

• washing function working area (in the basket): 228 x 128 x 260 mm;
• washing function working area (with platform): 228 x 128 x 250 mm;
• curing function working area: 220 x 260 mm;
• UV light source: 14 lenses 405 nm + Flexicure lamp;
• print washing and drying time: 1 to 30 minutes;
• rated power: 36 W;
• device dimensions: 312 x 267 x 434 mm;
• weight: 5.7 kg.

Packaging:

• 1pc

Formlabs Form Wash V2 post-print cleaning device

Form Wash automatically, thoroughly, and effectively cleans printed parts using IPA (isopropyl alcohol) or alternative solvents.

Features:

• prints can be transferred directly on the build platform from the printer to Form Wash or removed and placed in the wash basket;
• prints are precisely and thoroughly agitated in the solvent by an impeller, ensuring every corner and crevice is perfectly clean;
• after the wash cycle, Form Wash automatically lifts parts out of the solvent, allowing them to air dry. This prevents over-soaking (waterlogging) of models, which could lead to deformation.

Key parameters and performance:

• 10 minutes: default wash time when using fresh isopropyl alcohol (IPA);
• 7 - 15 liters: flexible solvent volume allowing for washing parts of various sizes;
• 120 models: Number of prints per IPA refill with regular use. Wash 67% more parts before replacing the solvent compared to the previous generation.

Packaging:

• 1 pc.

ECOSonic ultrasonic cleaner 0.8L

''Eco'' product line - excellent quality at a reasonable price

ECOSonic ultrasonic cleaner.

Fast and effective cleaning, user-friendly.

Perfect for cleaning small and medium-sized objects.

Technical data:

• device size 168×100×130mm;
• tank size 150×85×65mm;
• ultrasonic power 35W;
• timer 0 ~ 30 min adjustable, 18 cycles;
• frequency 40 kHz;
• tank capacity 800ml;
• net weight 0.9kg;
• warranty 1 year;
• CE, FCC certificate.

Packaging:

• 1 pc. (washer, basket, lid)

RAYSHAPE ShapeCure D

ShapeCure D UV Curing Devices

The ShapeCure D lamp ensures reliable curing in the final production stage, thanks to its 405 nm wavelength light modules ensuring reproducible and efficient results.

The device offers fast, one-click curing for uniform samples, and an audible signal indicates when curing is complete, simplifying process management.

Technical Data:

• UV wavelength: 405 nm (optimal for 3D printing resins);
• curing method: multiple LED light sources (Multi-light source) + 360° rotation + internal reflections;
• LED power: 150 W (ShapeCure D model);
• chamber volume: diameter: 180 mm x height: 100 mm;
• interface: 3.5'' touch screen;
• control: programmable curing settings;
• net weight of the device: 8 kg;
• device dimensions: 312 × 342 × 193 mm.

Packaging:

• 1 pc.

Dreve Foto Wash - Automatic cleaning device for 3D prints

Automatic cleaning device for 3D printed elements after the printing process.

Characteristics:

• device with magnetic stirrer technology and automatic transfer between two tanks for pre- and final rinsing;
• ability to create and select cleaning programs using the touch screen;
• the Sonic XL 4K platform can be connected directly to the device and cleaned together with adjacent elements;
• work automation saves time and improves efficiency

Advantages:

• very quiet operation;
• simultaneous cleaning of the printer platform;
• automatic transfer between cleaning tanks;
• special cleaning profiles for FotoDent® materials;
• Possibility of expansion with your own profiles.
• compatible with all types of printing tables

Technical data:

• voltage: maximum current 24V DC; 2A;
• max power 48 W;
• dimensions (68-81) x 48 x 43 cm (height x width x depth);
• washing tank dimensions 19 x 15 x 25 cm (H x W x D);
• net weight 16.5 kg.

Packaging:

• 1pc.

Formlabs Form Cure L V2 light polymerization device

The Formlabs Form Cure L V2 is the latest generation of large-format post-curing chamber, created as a key complement to the Form 4 and Form 4L printer ecosystem.

Characteristics:

• Express workflow: General Purpose resins cure in just 60 seconds, and advanced engineering or biocompatible materials cure in just 3–15 minutes;
• powerful convection heating: two 700 W heaters allow you to reach a chamber temperature of up to 100 °C (ideal for advanced engineering and dental resins);
• homogeneous exposure: up to 96 multi-directional high-power LEDs combined with a glass turntable ensure that the light reaches every corner of the model evenly;
• database of profiles (Presets): over 45 ready-made programs adapted to each Formlabs resin, guaranteeing repeatability of mechanical parameters and biocompatibility certification.

Technical Specifications;

• device dimensions (W x D x H): 50.7 × 54.3 × 54.5 cm;
• device weight: 40.0 kg;
• turntable diameter: 404 mm (40.4 cm);
• maximum height of the hardened model: 365 mm;
• maximum exposure area (Curing Volume): 42.3 × 42.3 × 36.5 cm;
• light source: 96 multi-directional LEDs;
• light wavelength: 405 nm (tolerance 400 - 410 nm);
• LED module electrical power: 350 W;
• LED radiation power (total): 120 W;
• maximum chamber temperature: 100 °C;
• heating system; convection (2x heaters with a total power of 1400 W);
• Heat-up time (EU version): up to 60 °C in 150 seconds | up to 80 °C in 360 seconds;
• control and interface: touchscreen display with profiles and manual mode;
• connectivity: USB-C port (for firmware updates);
• Mains requirements (EU): 220–240 VAC, 50–60 Hz, 8 A;
• noise emission: < 55 dB(A).

Ergonomic tip:

• When planning the workspace, it should be taken into account that the chamber flap opens to the side, and the device, due to its weight (40 kg), requires a stable worktop with a minimum depth of approximately 110 cm (to ensure full, free service access and ventilation).

Packaging:

• 1 pc.

Formlabs Form Wash L V2 device for cleaning models after printing

Formlabs Form Wash L V2 is the latest generation of intelligent, large-format automatic washer, designed as an integral part of the fast and clean post-process in the Form 4L and Form 4BL ecosystem.

The device fully automates the process of removing uncured resin residue from model surfaces. In the V2 version, Formlabs engineers focused on minimizing cleaning time, improving solvent circulation, and simplifying chemical management (IPA/TPM), making it an ideal solution for mass production of models, medical devices, and large-scale prototypes.

Characteristics:

• Washing directly on the platform: allows you to place the entire build platform of your Form 4L direct printer in the wash station. No need to remove models before washing – no contact with liquid resin and clean hands;
• Auto-lift (Worry-Free Architecture): After the programmed wash cycle is complete, the print basket automatically lifts above the liquid surface. This prevents excessive solvent absorption of the models, which could lead to cracking or loss of geometry;
• Intensive solvent circulation: the redesigned rotor in the V2 version forces a dynamic, multi-directional flow of alcohol (IPA), thanks to which it reaches the deepest nooks, crevices and internal channels in complex models;
• built-in solvent monitoring: the device allows you to constantly monitor the degree of alcohol saturation with the resin (using the included hydrometer/sensor), informing the user when the optimal time to replace the fluid has come.

Technical Specifications:

• compatibility with devices: Form 4L, Form 4BL (and Form 3L, Form 3BL);
• solvent tank capacity: 43 liters;
• suggested solvents: IPA (Isopropyl Alcohol), TPM, Water, Formlabs Resin Washing Solution;
• maximum dimensions of the washed object: 35.3 × 20.0 × 29.6 cm (entire Form 4L working area);
• control: digital display with timer and ready-made profiles for Formlabs resins;
• lifting mechanism: automatic, driven by an electric motor;
• device dimensions (closed): 78.0 × 46.0 × 67.0 cm;
• device dimensions (open): 78.0 × 46.0 × 113 cm (requires additional vertical space);
• device weight (without liquid): approx. 56.7 kg;
• Libra
• Power supply: 220–240 VAC, 50–60 Hz, 1 A

Logistics tip:

• Due to the large tank capacity (up to 43 liters), the Form Wash L V2 comes with a dedicated, external, battery-powered siphon pump. This facilitates quick filling of the wash and pouring of used solvent directly into canisters, dramatically improving the safety, convenience, and hygiene of work in the laboratory or modeling workshop by eliminating the risk of spills.

Packaging:

• 1 pc.

Otoflash G171-6 3D resin curing lamp

Otoflash lamp - the standard in 3D resin and composite curing.

Features:

• stroboscopic light technology provides a broad spectrum (250–950 nm) and high light intensity;
• cures virtually all 3D resins, regardless of the printer used;
• cures virtually all light-cured composites, ensuring a durable finish;
• equipped with curing trays that allow users to control the curing spectrum;
• optional nitrogen connection for better surface smoothness and reduced need for post-printing processing;
• 2 UV lamps mounted at the bottom of the curing chamber, operating in a pulse cycle of 10 pulses per second;
• the N₂ nitrogen connection option is essential when printing biocompatible medical-grade resins.

Technical specification:

• curing chamber dimensions: 120 L x 120 W x 50 H;
• device dimensions: 360 L x 310 W x 140 H;
• weight 6kg;
• flash frequency: 10 flashes per second;
• nitrogen connection: optional;
• light source: stroboscopic lamp;
• wavelength: 250 - 950 nm;
• rated voltage 110-240 V.

Packaging:

• 1 pc.

Dreve PCU LED N2 curing lamp for printed models

LED-based laboratory device for hardening 3D printed parts. Provides effective and deep hardening.

Two different curing environments can be selected depending on the application area.

Additionally, the appropriate nitrogen environment of PCU LED N2 ensures hardened components without an inhibitory layer - for laboratory and medical devices.

Advantages:

• Open system with 10 freely programmable memories.
• Easy operating concept thanks to electronic control system.
• Recording and monitoring process parameters.

Packaging:

• 1 piece

Mestra UV lamp SUN BEAM 3D +

Thanks to its size and efficiency, the lamp is capable of curing materials used in the dental industry, including models printed on 3D printers.

Professional quality polymerization.

Characteristics:

• the device emits constant, concentrated and uniform ultraviolet light for rapid curing of photopolymer resins;
• the secondary hardening process increases the hardness and durability of printed products;
• compact, simple and elegant design.

Control panel:

• display showing power level, curing time or turntable setting;
• During curing, a timer appears on the display.

Technical Data:

• chamber dimensions: Ø260 x 140 mm;
• height 250 mm, width 300 mm, depth 300 mm;
• LED wavelength: 400 ~ 405 nm;
• weight: 6 kg;
• curing time: 1 - 60 minutes;
• rotation speed: 60 seconds/lap.

Advantages:

• SUN BEAM 3D is equipped with UV LEDs;
• the light source does not produce ozone, it is environmentally friendly;
• the lamp consumes little electricity;
• The lamp life can last up to 10,000 hours, which is a long-term safe purchase for the laboratory.

Packaging:

• 1 pc.

IP Lighting Pro Polymerization Lamp

The new versatile IP Lighting Pro light curing lamp with modern LED technology.

The latest generation of light curing with advanced LED technology for optimal curing:

• veneering composites;
• 3D printing materials;
• materials for individual spoons.

Advantages:

• very wide wavelength spectrum 380 - 650 nm;
• efficiency and depth of exposure;
• shortens curing time by up to 50% compared to conventional halogen curing lamps;
• LED chips guarantee a much longer service life compared to halogen, xenon or fluorescent lamps;
• mirrored stainless steel chamber with a transparent 160 mm diameter turntable and intelligent cooling system;
• large polymerization chamber;
• Curing time adjustment in minutes and seconds, so it can be universally adjusted.

Curing time:

• spoon materials (40-90 s);
• composites (2-3 min);
• 3D printing materials (3-5 minutes).

Technical data:

• maximum inside temperature is 40°C;
• emission spectrum 380-650 nm;
• LEDs 48x LEDs;
• power 115 W;
• voltage 230/110 V; 50Hz;
• dimensions L x W x H 200 x 400 x 340 mm;
• weight 10 kg.

Packaging:

• 1pc.

Formlabs Form Cure V2 light curing device

Form Cure V2 precisely combines heat and 405 nm light to deliver strong, durable prints with unprecedented speed and consistency.

Now you can cure Form 4/B prints in as little as 60 seconds, with 4x the UV power, 5x faster heating time, and a 1.3x larger chamber.

Post-curing completes the chemical reaction started during printing, increasing the strength, durability, heat resistance, and creep resistance of the final part, while creating a harder, less tacky surface.

A sleek, new design with pre-programmed curing cycles, an easy-to-clean glass turntable, and side-hinged doors to allow easy access in a compact footprint.

Near-instant heating:

• 60 °C in 60 seconds;
• 80 °C in 150 seconds.

Fast curing:

• general purpose resins in 60 seconds;
• engineering and biocompatible resins in 3-15 minutes.

Technical specifications:

• dimensions 33.7 × 40.4 × 37.2 cm;
• weight 12.1 kg;
• turntable diameter 23.5 cm;
• maximum part height 24.5 cm;
• maximum curing chamber temperature 100 °C;
• light source 48 omnidirectional LEDs;
• LED power 150 W;
• LED radiant power 50 W;
• LED wavelength 405 nm;
• power requirements Input (EU) 220 - 240 V VAC, 50-60 Hz, 8 A.

Packaging:

• 1 pc.

Vertys Moon Light 3 Vacuum LED curing lamp

MOON LIGHT 3 VACUUM: A new era of photopolymerization.

With the MOON LIGHT 3 VACUUM, you can polymerize all commercially available composites completely independently. Utilize vacuum technology without the need for external connections or additional accessories.

Simply place your work under the elegant, transparent UV dome and let the vacuum do the rest! Thanks to the advanced programming system, you can customize every detail of the cycle: temperature, power, and time, to achieve increasingly precise, reliable results and excellent material quality.

The wide wavelength spectrum (from 395 nm to 660 nm) makes the device extremely versatile and compatible with almost any photoinitiator available in modern composites.

Wavelength range of application:

• λ1​ (395 nm) and λ2​ (405 nm): this is the standard in 3D printing and modern technical composites, most resins available on the market polymerize in this range;
• λ3​ (480 nm): this is the blue light range, it is necessary for traditional dental and technical composites using camphorquinone as an initiator;
• λ4​ (660 nm): this is red light; it is less common in standard lamps, and in MOON LIGHT 3 it ensures deep penetration of the material or cooperation with specialized, modern photoinitiators that require a longer spectrum to fully cure thick layers.

Technical Data:

• system: microprocessor;
• light source: LED 100% UV;
• wavelengths (λ): λ1-395 nm - λ2-405 nm λ3-480 nm - λ4-660 nm;
• interface: 3.5" touch screen;
• power supply: 100–230 V | 2–1.2 A | 50–60 Hz;
• LED power: 150 W;
• external dimensions: 355 x 350 x 410 mm;
• chamber dimensions: Ø 200 mm – height (H) 210 mm;

Packaging:

• 1 pc.