Formlabs Soft Tissue Starter Pack Form 3 3D printer resin set

Soft Tissue Starter Pack for Form 3. Starter pack for soft tissues.

Features:

• allows you to create your own Soft Tissue Resin in custom-matched shades of pink (dark, medium, and light);
• allows for 3D printing of flexible gingiva masks, used in combination with rigid dental models;
• thanks to the addition of removable, flexible elements imitating soft tissues to the produced models, you can verify the accuracy of prosthetic restorations on implants with full confidence.

Packaging:

• 1 set

Formlabs Dental Model V3 Form 3 3D printer resin 1 liter

Model Resin V3 (Form 3). Designed for crown and bridge models with removable dies.

Dental Model Resin is a high-precision resin with high accuracy.

Version 3:

• this version of Model Resin is a reformulation of the previous version;
• thanks to the new V3 resin, you can print even more accurate models in half the time;
• supports print resolutions: 100 and 50 microns;
• requires Form 3 Resin Tank V2.1 or newer for Form 3B and Form 2 Resin Tank LT for Form 2;
• post-curing is required, after printing, the finished parts require additional curing (exposure).

Packaging:

• 1 pc.

Formlabs Precision Model V1 Form 4 3D printer resin 1 liter

Precision Model Resin Form 4. A high-accuracy material, this next-generation model resin was developed to leverage the new Form 4 ecosystem. It creates beautiful models with crisp edges thanks to its high opacity, beige color, and smooth, matte finish.

Precision Model Resin is the next generation of model resin for the new Form 4 printer series, printing three times faster while offering improved accuracy and aesthetics.

It was developed to achieve the highest possible precision, repeatability, and aesthetics. It is perfect for creating highly accurate dental models (prosthetic, implant) as well as general applications requiring perfect detail reproduction.

Features:

• ultra-high precision: guarantees perfect dimensional fit – over 99% of the printed surface is within 100 μm of the digital CAD design;
• extreme print speed: optimized for LFD technology in Form 4 series printers, the resin prints up to 3 times faster compared to previous versions of model resins (allowing, for example, printing 8 dental models in about 90 minutes);
• plaster-like, matte appearance: the resin has a beige color with high opacity and a smooth, matte finish. This eliminates light reflections and facilitates precise visual assessment of fine edges (e.g., margin lines in dentistry) and enables seamless scanning with laboratory scanners.
• lightning-fast post-processing: finished parts require a short, just 5-minute wash in isopropyl alcohol (IPA) and a 5-minute post-cure in a lamp at room temperature (without turning on the heater).

Applications:

• prosthetic models (crowns, bridges);
• implant models and implant analogs;
• models with complex, removable dies;
• diagnostic models.
• precise engineering prototypes, miniatures, and general-purpose applications requiring sharp edges and smooth surfaces.

Specifications and compatibility:

• color: beige (Beige, Matte);
• supported layer height: 25 and 50 microns;
• compatible printers: Form 4, Form 4B, Form 4L, Form 4BL;
• required tank: Form 4 Resin Tank / Form 4L Resin Tank;
• required platform: Form 4 Build Platform (standard or Flex).

Packaging:

• 1 pc.

Formlabs Standard V4.1 Form 3 3D printer resin 5 liters

Standard resin for creating anatomical models for training and diagnostic purposes.

Color:

• Clear;
• Grey.

Grey Resin V4.1 is an updated photopolymer resin for SLA 3D printing that combines high accuracy, increased strength, and excellent detail. The Grey V4.1 version provides a richer shade of grey, a uniform matte finish, and consistent printing results. With a capacity of 5 liters, this resin is an ideal choice for large-scale production, engineering prototyping, and mass production of models.

Clear Resin V4.1 is an extremely rigid material created for special tasks, which, after polishing, allows for an almost perfect glass effect (full optical transparency). It was designed for models that work with light or have complex internal structures that you want to showcase.

Features:

• excellent shape reproduction;
• durability;
• excellent surface quality.

Compatibility:

• designed for Formlabs Form 3 and Form 3L printers.

Packaging:

• 1 pc.

Formlabs VarseoSmile TriniQ Resin Form 4B 3D printer resin 750g

Formlabs BEGO™ VarseoSmile® TriniQ® resin is a versatile, ceramic-filled, biocompatible material designed for both temporary and permanent restorations, including single units such as crowns, inlays, onlays, veneers, bridges, and denture teeth.

BEGO™ VarseoSmile TriniQ is the first 3D printing resin designed for permanent bridges, characterized by excellent accuracy, translucency, and an efficient process.

Curing recommendations:

• Recommended lamp: We recommend using the Otoflash G171-6 lamp for curing.
• Medical printing (biocompatible): For medical resins, it is necessary to use a lamp with a nitrogen (N₂) connection.

Note:

• The final color of the finished work may differ slightly from the shade guide – this depends on the model of the printer and curing lamp used.

Available in three VITA shades:

• A2;
• A3;
• B1.

Features:

• wide spectrum: for permanent and temporary restorations and removable denture elements;
• aesthetics: available in three popular VITA shades (A2, A3, B1), allowing for a perfect match to the patient's natural teeth;
• innovation: certified for permanent prosthetic bridges.

Printer compatibility: Form 4B

• compatible with Form 4 resin tank;
• compatible with Form 4 Flex build platform;
• biocompatibility certified.

Material properties

• flexural strength: 120 MPa;
• flexural modulus: 3600 MPa;
• Shore hardness: ≥ 90 D;
• sorption: < 0.6 µg/mm³;
• Solubility: < 12 µg/mm³;

Packaging:

• 1 pc.

Formlabs Resin Pump for Form 3

Formlabs resin pump.

The resin pumping system for Form 3 series stereolithography (SLA) 3D printers smoothly delivers resin from a 5L resin cartridge directly into the printer's tank.

Reduce waste by 86%.

Package:

• 1 pc.

Formlabs Dental LT Clear V2 Form 4 3D printer resin 1 liter

Dental LT Clear Resin V2 is a long-term biocompatible material for printing affordable, high-quality hard splints and occlusal guards.

Features:

• highly durable and fracture-resistant material;
• resistant to discoloration over time;
• high aesthetics and durability.

Technical data:

• tensile strength: 52 MPa;
• tensile modulus: 2080 MPa;
• elongation: 12%;
• flexural modulus: 2.3 GPa;
• notched IZOD impact strength: 449 J/m;
• Shore D hardness: 78D.

Packaging:

• 1 pc.

Formlabs Standard Grey V4 Form 3 1L Resin V4 Sale

V4 version sale.

The printing material in SLA technology is a liquid photopolymer resin hardened by a laser beam.

Formlabs standard materials are the most versatile resins for all applications.

Strandard resins maintain high model accuracy without the risk of losing strength.

Stiffness, durability, the ability to produce advanced details and the final smoothness of the print contribute to the wide use of the resin in various industries as well as in medicine.

Color:

• gray (Grey);

Application:

• concept models and prototypes;
• transparent elements;
• models requiring a smooth surface.

Physical data:

• tensile strength 63 PMa.
• elongation at break 6%;
• Shore hardness D75;
• modulus of elasticity 2.2 GPa.

Packaging:

• 1l

Formlabs Denture Base V1 Form 4 3D printer resin 1 liter

Denture Base Resin is a biocompatible material for producing durable, wear-resistant denture bases and temporary dentures at a fraction of the cost of traditional methods.

With 3 available shades (OP, RP), technicians can achieve realistic gums with natural margins, using either 3D printed prosthetic teeth or prefabricated teeth.

Technical Specification:

• printing technology: SLA;
• biocompatibility: skin contact, mucous membrane contact;
• minimum layer thickness: 50 microns;
• categories: dentistry (Dental);
• colors: OP, RP;
• application: dentistry;
• flexural strength: 50.0 MPa;
• density: 1.15 g/cm³ < X < 1.25 g/cm³;
• curing required.

Packaging:

• 1 pc.

Formlabs IBT Flex V1 Form 4 3D printer resin 1 liter

IBT Flex Resin is a Class I biocompatible material with increased flexibility, durability, and transparency, which guarantees optimal clinical results while ensuring an excellent patient experience and seamless, precise transfer of orthodontic brackets and composite filling materials.

Features:

• increased elongation and flexibility;
• seamless intraoral placement and removal, ensuring fast and accurate bracket placement and perfect tray seating on the dentition;
• optimized transparency and color;
• this new formula allows for easy visualization of important elements such as brackets, composite filling materials, and teeth;
• high print accuracy and predictable results;
• certified biocompatible, FDA registered.

Material properties:

• tensile strength: 7.2 MPa;
• tensile modulus: 8 MPa;
• elongation at break: 135%;
• Shore A hardness: 77 - 80 A;
• transparency (2 mm): 85%;
• chemical disinfection: 70% isopropyl alcohol for 5 minutes.

Packaging:

• 1 pc.

Formlabs Dental LT Comfort V1.1 Form 4 3D printer resin 1 liter

Dental LT Comfort Resin is a biocompatible resin for printing flexible occlusal splints, bruxism guards, and teeth whitening trays.

Features:

• splints are easy to polish, allowing for high optical transparency;
• greater wearing comfort and better durability of the splints;
• splints are resistant to impact and wear.

Technical Data:

• tensile strength: 29.1 MPa;
• tensile modulus: 994 MPa;
• elongation: 33%;
• flexural strength: 21 MPa;
• flexural modulus: 643 MPa;
• notched Izod: 98 J/m;
• Shore D hardness: 75D.

Packaging:

• 1 pc.

Formlabs Fast Model V1 Form 4 3D printer resin 1 liter

Formlabs' fastest resin, prints at speeds of over 100 mm per hour.

Allows printing models in minutes or large prototypes in less than two hours.

Compatibility with Form 4, Form 4B printers, Resin Tank Form 4, Form 4 Build Platform, Form 4 Build Platform Flex.

Application:

• prosthetic models;
• orthodontic models.

Color:

• Gray

Advantages:

• Fast Model is the next generation of Draft Resin, designed to use the new Form 4 ecosystem;
• faster - designed to take advantage of the new Form 4 ecosystem for up to three times faster printing;
• stronger and stiffer - 45% higher strength and modulus;
• more opaque and matte color.

Mechanical properties of Fast Model resin:

Room temperature cure for 5 minutes:

• ultimate tensile strength 55 MPa;
• tensile modulus 2500 MPa;
• elongation at break 15%;
• flexural strength 98 MPa;
• flexural modulus 2600 MPa;
• notched Izod 30 J/m;
• heat deflection temperature at 0.45 MPa 58 °C.

Post-cure at 60 °C for 15 minutes:

• ultimate tensile strength 62 MPa;
• tensile modulus 2700 MPa;
• elongation at break 11%;
• flexural strength 106 MPa;
• flexural modulus 2700 MPa;
• notched Izod 37 J/m;
• heat deflection temperature at 0.45 MPa 76 °C.

Packaging:

• 1 pc.

Formlabs Surgical Guide SG V1 Form 3 3D printer resin 1 liter

Surgical Guide Resin Form 3. Surgical Guide Resin is a biocompatible resin suitable for autoclave sterilization. It is designed for applications such as 3D printing of dental surgical guides used in implant placement. This resin has been developed specifically for Formlabs printers and rigorously tested to meet chemical disinfection and steam sterilization (autoclave) standards for implant systems.

For printing:

• surgical templates;
• surgical guides;
• pilot drill guides;
• positioning and sizing templates for dedicated components.

Specification and compatibility:

• supported print resolutions: 100 and 50 microns (Form 2) and 100 microns (Form 3B);
• compatibility: exclusively with Form 2, Form 3B, and Form 3B+ printers. The product is not compatible with the standard Form 3 printer;
• hardware requirements (Form 2): when used with the Form 2 printer, a Resin Tank LT is required;
• post-curing required: after printing, finished parts require additional curing (light exposure).

Meets ISO standards:

• EN ISO 10993-5:2009 (non-cytotoxic);
• ISO 10993-10:2010/(R)2014 (non-sensitizing);
• ISO 10993-10:2010/(R)2014 (non-irritating);
• EN ISO 13485:2016;
• EN ISO 14971:2012.

Packaging:

• 1 pc.

Formlabs Dental LT Clear V2 Form 3 3D printer resin 1 liter

A Class IIa biocompatible resin with high resistance to fracture and wear, making Dental LT Clear ideal for splints, retainers, and other direct orthodontic appliances.

Thanks to its transparent color, high optical clarity is achieved for beautiful end products.

• The material has been evaluated according to ISO 10993-1: 2018.

Applications:

• occlusal splints;
• retainers;
• occlusal guards;
• surgical guides;
• retainers;
• other orthodontic accessories.

Material properties:

• flexural modulus 2300 MPa;
• elongation at break 12%;
• Shore hardness: 78D;
• color transparent.

Packaging:

• 1 liter

Note: The current price promotion (discount) applies only to products available from stock or until 30.04.2026

Formlabs Castable WAX V1 Form 3 3D printer resin 1 liter

Resin for jewelry and dental prosthetics needs.

• Does not require post-print light curing.

The original Castable Wax Resin is designed for creating lost-wax casting models.

The material contains 20% wax and, thanks to its properties, leaves no residue after burnout and accurately reflects the mold contour.

It is suitable for precision casting, allowing for the reproduction of complex surfaces without visible layer lines.

Models do not require additional curing after printing.

Also recommended for dental prosthetics:

• crowns;
• bridges;
• partial dentures;
• frameworks.

Packaging:

• 1 pc.

Formlabs Standard V4.1 Form 3 3D printer resin 1 liter

Standard V4.1 Form 3 resin. The printing material in SLA technology is a liquid photopolymer resin cured by a laser beam.

Formlabs standard materials are the most versatile resins for all kinds of applications.

Standard resins maintain high model accuracy without the risk of losing strength.

Rigidity, durability, the ability to create advanced details, and the final smoothness of the print contribute to the wide application of the resin in both various industries and medicine.

Version V4.1

• improved colors (deeper black/gray, clearer clear);
• more uniform, deep matte;
• increased impact strength and crack resistance;
• Form 3 hardware compatibility;

Colors:

• transparent (Clear);
• white (White);
• gray (Grey);
• black (Black).

Application:

• conceptual models and prototypes;
• transparent elements;
• models requiring a smooth surface.

Physical data:

• tensile strength 53 MPa.
• elongation at break 9-12%;
• Shore hardness D75;
• modulus of elasticity 2.2 GPa.

Packaging:

• 1 pc.

Formlabs Maintenance Kit replacement resin pump tubes

Replacement resin pump tubes.

Over time, pump performance will degrade, resulting in longer fill times.

Resin pump tubes should be replaced every 6 months or when changing resin types.

This kit includes both the internal resin pump tube and the delivery tube to connect the resin pump to the 5-liter resin container.

Package:

• 1 set of tubes

Formlabs Flexible 80A V1 Form 3 3D printer resin 1 liter

Durable, flexible resin with a Shore 80A hardness.

Features:

• imitates the properties of rubber or TPU material;
• prints made of this material are resistant to bending and compression even in repeated cycles;
• excellent material for printing flexible components.

Technical Data:

• compatibility: available for Form 2 and Form 3 generation printers;
• supported print resolutions: 100 and 50 microns;
• requires post-curing after printing.

Packaging:

• 1 pc.

Formlabs Temporary CB V1 Form 3 3D printer resin 1 kilogram (0.7 L)

Material used for the production of temporary crowns, overlays, veneers, and bridges in a natural enamel color.

Features:

• printing material requires the use of a stainless steel build platform;
• supported layer height: 50 microns;
• post-curing required;
• Temporary CB resin is a medical device as defined in the Medical Device Directive (93/42/EEC) in the EU and in section 201(h) of the Federal Food Drug & Cosmetic (FD&C) Act;
• meets ISO standards: EN ISO 10993-5:2009 (non-cytotoxic); ISO 10993-10:2010/(R)2014 (non-irritating); ISO 10993-10:2010/(R)2014 (non-sensitizing); ISO 10993-3:2014 (non-genotoxic); - ISO 10993-1:2009 (non-toxic).
• restorations printed with Temporary CB resin have been evaluated according to ISO 10993-1:2018 (Part 1: Evaluation and testing within a risk management process) and ISO 7405:2009/(R)2015 (Dentistry – biocompatibility evaluation).

Technical data:

• density: 1.4 - 1.5 g/cm3;
  • viscosity: 2500 - 6000 MPa*s;
  • flexural strength (post-cured) 2,3,4: ≥ 100MPa;

Packaging:

• 1 pc.

Formlabs Denture Base V1 3D printer resin 1 liter

Biocompatible resin for printing complete dentures.

Features:

• perfectly fitted dentures faster and cheaper;
• long-term, Class IIa biocompatible resins allow dentists and technicians to produce complete dentures using 3D printing technology;
• Denture Base resin has been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN;

The resins have received a biocompatibility class confirmed by standards: EN-ISO 10993-1:2009/ AC:2010:

• non-mutagenic;
• non-cytotoxic;
• does not cause erythema or edema reactions;
• non-sensitizing;
• does not cause systemic toxicity.

ISO standards for Denture Base:

• EN-ISO 20795-1:2013 (Dentistry – Base Polymers – Part 1: Denture Base Polymers)

Colors:

• LT (Light Pink)
• OP (Original Pink)
• RP (Reddish Pink)

Packaging:

• 1 pc.

Formlabs Premium Teeth HT V1 Form 4 3D printer resin 1 kilogram (0.8l)

Premium Teeth Resin is a biocompatible, nanoceramic-filled material with improved aesthetics, mechanical properties, and proven durability, ensuring optimal clinical performance.

3D printing of:

• prosthetic teeth;
• temporary implant-supported restorations (All-on-X);
• temporary single-unit restorations (crowns, inlays, onlays, and veneers);
• and bridges up to seven units.

Technical data:

• SLA technology;
• colors A2, A3, B1, BL;
• flexural strength 155.0 MPa;
• flexural modulus 4300.0 MPa;
• Shore hardness 90.0 D;
• opacity at 1 mm thickness 56%.

Features:

• best-in-class mechanical properties;
• nanoceramic-filled resin with industry-leading flexural strength while maintaining fracture toughness.
• natural aesthetics;
• creates realistic restorations with optimized color, translucency, and opalescence;
• proven durability;
• rigorously tested to ensure a material resistant to wear, staining, and abrasion, maintaining its original properties over time;
• simplified workflow;
• accurate, high-quality prints with reduced post-processing time and easy polishability.

Packaging:

• 1kg

Note: The current price promotion (discount) applies only to products available in stock or until 30.04.2026

Formlabs Surgical Guide (SG) V1 Form 4 3D printer resin 1 liter

A Class I biocompatible resin designed for dentists to create precise surgical guides.

Features:

• prints from this material can be autoclaved and are approved for contact with skin and tissues;
• the material was created and rigorously tested for printing precise templates and guides used in implant procedures;
• after post-processing, prints from this material can achieve full transparency for better positioning.

Material data:

• elongation: 12%;
• flexural strength: > 102 MPa;
• flexural modulus: > 2400 MPa.

Packaging:

• 1 pc.

Formlabs Resin V5 Form 4 for dental models 3D printer resin 1 liter

Resin V5 is a versatile, general-purpose resin that provides the perfect balance between print speed, high precision, and aesthetic appearance.

For dental models.

Color:

• Grey;
• Black;
• Clear;
• White.

Features:

• highest dimensional accuracy: precise xy dimensional tolerances of ±0.15% (lower limit: ±0.02 mm);
• excellent aesthetics;
• versatile mechanical properties;
• prints three times faster than the previous version, while offering improved mechanical properties.

Mechanical properties post-cured at 60 °C for 15 minutes:

• ultimate tensile strength: 62 MPa;
• tensile modulus: 2675 MPa;
• elongation at break: 13%;
• flexural strength: 103 MPa;
• flexural modulus: 2750 MPa;
• notched Izod: 32 J/m;
• heat deflection temperature at 0.45 MPa: 71 °C.

Post-Processing:

• post-curing is optional for parts printed in Grey Resin V5.
• however, we recommend curing for 5 minutes at room temperature to reduce surface tackiness and improve mechanical properties, or curing for 15 minutes at 60 °C for maximum strength, stiffness, and heat deflection temperature.

Packaging:

• 1 pc.

Formlabs Precision Model (Form4) 5l 3D Printer Resin

This next-generation precision model printing resin, developed specifically for the new Form 4 ecosystem, is a high-accuracy material that creates beautiful models with crisp edges thanks to its high opacity, beige color, and smooth, matte finish.

Precision Model Resin is the next generation of model resin for the new Form 4 series of printers, printing three times faster while offering improved accuracy and aesthetics.

Advantages:

• Prints eight models in just 90 minutes.
• 5-minute cycle in the washer.
• 5-minute cure at room temperature.

Compared to Model Resin V3, Precision Model Resin is:

• Greater accuracy - better resolution and consistency of fine details.
• Speed - Engineered to leverage the new Form 4 ecosystem for three times faster printing.
• More opaque and matte aesthetic to better highlight edges.

Packaging:

• 5l

Note: The current price promotion (discount) is valid only for products available from stock or until April 30, 2026

Formlabs Grey V5 Form 4 resin for 5L models

Grey Resin V5 is a versatile, general-purpose resin that provides the perfect balance between print speed, high precision and aesthetic appeal.

For dental models.

Characteristics:

• highest dimensional accuracy: precise xy dimension tolerances of ±0.15% (lower limit: ±0.02 mm);
• perfect aesthetics;
• versatile mechanical properties;
• printing three times faster than the previous version while offering improved mechanical properties.

Mechanical properties post-curing at 60 °C for 15 minutes:

• ultimate tensile strength: 62 MPa;
• tensile modulus: 2675 MPa;
• elongation at break: 13%;
• bending strength: 103 MPa;
• modulus of elasticity: 2750 MPa;
• Notched Izod: 32 J/m;
• heat deflection temperature at 0.45 MPa: 71 °C.

Post-Processing:

• Post-curing is optional for parts printed in Grey Resin V5.
• However, we recommend curing for 5 minutes at room temperature to reduce surface tack and improve mechanical properties or curing for 15 minutes at 60°C to achieve the highest strength, stiffness and heat deflection temperature.

Packaging:

• 5000ml

Note: The current price promotion (discount) is valid only for products available from stock or until December 31, 2026.