Durable resin (v2) simulating the properties of polypropylene (PP) is intended for products exposed to friction and wear. Thanks to the low modulus of elasticity, high elongation and high impact strength, prints made of Durable resin are smooth, glossy and have good resistance to deformation. Use this material for applications that require minimal friction.

Package:

• 1000 ml

Model BioDent® 385 nm

The BioDent® model is a light-curing resin consisting of 50% renewable raw materials. The properties of the material are ideal for the production of models (also in Aligner). The FotoDent® bio-based model can be cleaned using the FotoClean program.

Advantages:

• less pollution in the atmosphere
• free of carcinogenic materials
• shorter cleaning times

Material data:

• Color beige opaque
• Modulus of elasticity ≥ 2200 MPa
• Viscosity ~ 0.6 Pa · s
• Bending strength ≥ 95 MPa

Packaging:

• 1 kg bottle.

Designed for crown and bridge models with interchangeable stumps, Dental Model Resin is a very precise, high-accuracy resin. Version 3

This version of Model Resin is a reformulation of the previous version. With the new V3 resin, you can print even more accurate models in half the time. Supports print resolutions: 100 and 50 microns. Requires Form 3 Resin Tank V2.1 or later for Form 3B and Form 2 Resin Tank LT for Form 2.

Package:

• 1l

Light-curing resin for the production of denture bases. The material provides accurate results with exceptional dimensional stability. The FotoDent® prosthesis is MMA free and has a stable color.

Material data:

• Final hardness 80 Shore D.
• Modulus of elasticity> 2000 MPa
• Bending strength> 80 MPa
• Viscosity 0.4-0.6 Pa · s
• Pink transparent color.

Packaging:

• 1 kg

The multi-purpose SIMPLEX filament provides a natural surface effect due to the high content of hard plaster. Offers a high level of detail. It is conducive to pleasant work because it does not contain irritating ingredients. It does not produce unpleasant fumes during the printing process, is suitable for recycling and industrial composting. It can be easily processed with rotary instruments or a scalpel. Printing temperature: 205-220 ° C

Data:

• Gypsum fiber Ø 1.75 mm
• 1 x 800 g
• White color

The special SIMPLEX aligner filament is tailored to the special requirements of aligner production and the thermoforming technique. It is conducive to pleasant work because it does not contain irritating ingredients. It does not emit unpleasant fumes during the printing process. No finishing, no annealing. Printing temperature: 235-255 ° C

Details:

• Heat-resistant special filament Ø 1.75 mm,
• 1 x 800 g
• White color

Package:

• 1 piece

• The SIMPLEX filament for working models provides high detail.
• It is conducive to pleasant work because it does not contain irritating ingredients.
• Does not produce unpleasant fumes during the printing process,
• Suitable for recycling and industrial composting.
• Printing temperature: 190-230 ° C

Details:

• Biofilament Ø 1.75 mm,
• 1 x 800 g,
• green color

The filament for the demonstration model made of SIMPLEX biofibers offers a high level of detail and sharpness of diagnostic models. It is conducive to pleasant work because it does not contain irritating ingredients. It does not produce unpleasant fumes during the printing process, is suitable for recycling and industrial composting. Printing temperature: 190-230 ° C

Details:

• Biofilament Ø 1.75 mm,
• 1 x 800 g,
• White color

Package:

• 1 piece

Exceptional performance, high quality. Modified material for the highest quality results. Standard Formlabs resin maintains the high accuracy of the model without the risk of losing strength.

Advantages:

• High resolution
• A carefully developed resin for demanding details that will allow you to capture the smallest elements in the model.
• Durability and precision
• Standard resin allows you to create accurate and reliable components, ideal for rapid prototyping of the product.
• Surface finish, perfectly smooth right out of the printer, SLA printed parts have a gloss and finish like the final product.

Package:

• 1 liter

Gray resin is perfect for prototyping and general design, great for making small details. Perfect shape mapping, durability and excellent surface quality.

Package:

• 1l

Designed to print models of crowns and bridges with interchangeable dies, Dental Model V2 is a resin with high precision and accuracy. Print the finest details with an accuracy in the range of 35 micrometers and removable stencils for a permanent fit. The smooth, matte surface finish and plaster-like color make it easy to switch from analog to digital production.

Package:

• 1 liter

First class biocompatibility resin designed for dentists to create precise surgical templates. Printouts made of this material can be sterilized in an autoclave and are allowed to come into contact with the skin and tissues. The material was created and rigorously tested to print precise templates and guides used in implantological procedures. After post-processing, prints from this material can be fully transparent for better positioning.

Recommended printing on a layer of 100 or 50 microns (Form 2) and 100 microns (Form 3B).

Meets ISO standards:

• EN ISO 10993-5: 2009 (non-cytotoxic)
• ISO 10993-10: 2010 / (R) 2014 (non-sensitizing)
• ISO 10993-10: 2010 / (R) 2014 (non-irritating)
• EN ISO 13485: 2016
• EN ISO 14971: 2012

Package:

• 1 liter

Class IIa biocompatible resin with high tear and wear resistance, making Dental LT Clear ideal for splints, fixtures and other direct orthodontic devices. Due to the transparent color, high optical clarity is achieved for beautiful end products.

Packaging: 1 liter

First class biocompatible material (EN-ISO 10993-1: 2009 / AC: 2010, USP Class VI), intended for dentists to create precise surgical guides, dental models or similar details.

Package:

1 liter

Casting material for jewelery

The original Castable Wax Resin is intended for the production of models lost in foundry. The material contains 20% wax and thanks to its properties does not leave ash and reflects the contour of the mold well. Suitable for precision casting, it allows you to mirror complex, free surfaces with no visible layer lines. "Purple \ u201D models do not require additional hardening after construction.

Also recommended for the dental industry:

• crowns
• bridges
• partial dentures
• skeletons

Supported resolutions: 50 and 25 microns

It does not require light curing after printing.

Packaging: 1L

The Clear resin will work well in transparent elements, revealing the internal details of the structure. Standard resin allows you to create accurate and reliable components, ideal for rapid prototyping of the product. Perfectly smooth right out of the printer, parts printed in SLA technology have a gloss and finish just like the final product.

Package:

• 1l

E-Dentstone - for printing models with moving segments.

Package:

• 1000 g.

E-Guard - Resin for printing splints for bruxism.

Package:

• 1000 g

E-Partial - resin for printing partial dentures.

Package:

1000g

E-OrthoShape is a material that prints in 100 micron layers. It is recommended for the inexpensive production of models from which thermoformed aligners are made.

Physical properties:

• Tensile strength - 65 MPa
• Modulus of elasticity in tensile - 1772 MPa
• Elongation at Break - 6.6%
• Bending strength - 108 MPa
• Modulus of elasticity in bending - 2543 MPa
• Viscosity - 765 cP at 30 ° C
• Grey colour

Taming:

1000 g.

E-Appliance M is ideal for 3D printing of orthodontic models. E-Appliance is a specially designed nano-filled resin that will reliably work with both polyvinyl alcohol separators and tin foil, replacing the "salt and pepper \ u201D" technique in the manufacture of an orthodontic appliance. This method of internal or laboratory construction of removable or fixed orthodontic appliances provides excellent strength and durability combined with an incredible amount of design freedom for individual patient expression. Models that have been printed with E-Appliance offer the detailed precision and high quality surface finish that EnvisionTEC is known to be bonded to a surface that accepts a wide range of separating agents to perfectly remove the finished device from the model.

Package:

500g.

Light-curing resin for printing skeletons. It burns out without a trace. Red transparent color. The material is highly compatible: it can be used with all commercially available embedding materials.

Material data:

• Bending strength ≥ 100 MPa
• Elongation at Break 7.5% -11%
• Modulus of elasticity ≥ 2000 MPa
• Final hardness 80-90 Shore D.
• Color red transparent
• Viscosity <0.3 Pa · s

Packaging:

• 1 kg.

Light-curing resin for printing the gingival mask. Durable soft and flexible. Perfectly combined with models made of resins for models.

Material data:

• Final hardness approx. 70 Shore A
• Pink color
• Recovery after 100% deformation
• Viscosity approx. 2 Pa · s
• Bending deformation> 40%

Packaging:

• 1 kg.

Light-curing resin for the production of implant templates. Dimensionally stable and biocompatible.

Material data:

• Blue transparent color
• Modulus of elasticity> 1.700 MPa
• Bending strength ≥ 75 MPa
• Elongation at Break> 10-15%
• Final hardness> 80-85 Shore D.

Packaging:

• 1 kg.

Light-curing resin for the production of implant templates. Dimensionally stable and biocompatible. Blue transparent color.

Material data:

• Blue transparent color
• Modulus of elasticity> 1.700 MPa
• Bending strength ≥ 75 MPa
• Elongation at Break> 10-15%
• Final hardness> 80-85 Shore D.

Packaging:

• 1 kg.

Light-cured resin for the production of dental models for orthodontics and prosthetics. High form stability. Breakage, abrasion, moisture and light resistant.

Material data:

• Bending strength ≥ 85 MPa
• Elongation at Break> 11-15%
• Modulus of elasticity ≥ 1.750 MPa
• Final hardness 80-85 Shore D.
• Color beige opaque
• Viscosity 0.8-1.2 Pa · s

Packaging:

• 1 kg.

Specially developed for the new generation of printers with 385 nm. Light-curing resin for the production of dental models for orthodontics and prosthetics. Faster printing process due to higher efficiency and precision. It is also suitable for printing expert and demonstration models.

Material data:

• Final hardness sdf
• Modulus of elasticity ≥ 1900 MPa
• Bending strength ≥ 85 MPa
• Beige colour
• Viscosity 0.8-1.2 Pa · s
• Elongation at break ≥ 8%

Packaging:

• 1 kg

Biocompatible light-cured resin for the production of dental impression trays. High reactivity with low viscosity. Finished impression trays have a homogeneous surface which greatly reduces manual handling.

Material data:

• Bending strength> 75 MPa
• Elongation at Break> 5%
• Modulus of elasticity ≥ 2,000 MPa
• Final hardness> 80 Shore D.
• Green color
• Viscosity approx. 1 Pa · s

Packaging:

• 1 kg.

Light-curing resin for the production of orthodontic appliances. The configuration models are perfect for the thermoforming technique.

Material data:

• Final hardness approx. 80-85 Shore D
• The color of the corn is yellow
• Modulus of elasticity ≥ 2,000 MPa
• Viscosity 1.2 Pa · s
• Bending deformation ≥ 11-15%
• Bending strength ≥ 95 MPa

Packaging:

• 1 kg.

E-Dent 400 resin - resin for crowns and temporary bridges for long-term use.

Package:

• 1000g

E-Model Light U - resin for models.

Packaging:

1000g

The EnvisionTEC e-prosthesis material is an FDA approved, biocompatible Class IIa material suitable for 3D printing of all types of denture bases.

Package:

• 1000g

The material used for the production of temporary crowns, overlays, veneers and bridges in a natural enamel color. The material for printing requires the use of a stainless steel worktable. Supported layer height: 50 micrometers. Curing required.

Meets ISO standards:

EN ISO 10993-5: 2009 (non-cytotoxic)

ISO 10993-10: 2010 / (R) 2014 (non-irritating)

ISO 10993-10: 2010 / (R) 2014 (not sensitizing)

ISO 10993-3: 2014 (not genotoxic)

ISO 10993-1: 2009 (non-toxic)

Temporary CB resin is a medical device as defined in the EU Medical Device Directive (93/42 / EEC) and Chapter 201 (h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with CB provisional resin have been assessed according to ISO 10993-1: 2018 (Part 1: Assessment and testing as part of a risk management process) and ISO 7405: 2009 / (R) 2015 (Dentistry - Biocompatibility Assessment).

Technical data:

• Density: 1.4 - 1.5 g / cm3

  • Viscosity: 2500 - 6000 MPa * s

  • Bending strength (after hardening) 2,3,4: ≥ 100MPa

Package:

• 1l

Biocompatible resin for printing full dentures. Perfectly fitted dentures faster and cheaper. Long-term, biocompatible class IIa resins enable dentists and technicians to manufacture full dentures using 3D printing technology.

Denture Base resin has been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins have received the biocompatibility class confirmed by the standards: EN-ISO 10993-1: 2009 / AC: 2010:

• Not mutagenic.
• Non-cytotoxic.
• It does not cause erythema or edema reactions.
• It is not allergenic.
• Does not cause systemic toxicity.

ISO standards for Denture Base: - EN-ISO 20795-1: 2013 (Dentistry - Base Polymers - Part 1: Denture Base Polymers)

Colors:

• LT (Light Pink)
• OP (Original Pink)
• RP (Reddish Pink)

• DP (Dark Pink)

• Supported layer height: 50 micrometers.

• Curing required.

Package:

• 1l

Resin for the Photon Mono X printer.

Package:

• 1pc / 500g

Resin for the Photon Mono X printer.

Package:

• 1pc / 500g

Resin for the Photon Mono X printer.

Package:

• 1pc / 500g

Casting resin - burns out without residue.

Package:

• 500g

High-quality resin for the model, low shrinkage ensures perfectly fitting models. Due to the good combination of hardness and strength, this resin is well suited for applications in many demanding areas.

Technical data:

• Bending modulus: 1,882-2,385 MPa
• Flexural strength: 59-70 MPa
• Heat resistance: 80 ° C
• Thermal expansion coefficient: 95 * E-6
• Volume shrinkage: 3.72-4.24%
• Linear shrinkage ratio: 1.05-1.35%
• Tensile modulus: 1.779-2.385 MPa
• Tensile stress at break: 11% -20%
• Hardness: 84D
• Glass transition temperature: 100 ° C
• Density: 1.05-1.25 g / cm³

Packaging:

• 1000g

Black resin was developed for models with very small sizes and intricate details.

Perfect shape mapping, durability and excellent surface quality.

Perfectly smooth right out of the printer, parts printed in SLA technology have a gloss and finish just like the final product.

Package:

• 1l

Denture Base and Teeth resins have been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins have received the biocompatibility class confirmed by the standards: EN-ISO 10993-1: 2009 / AC: 2010:

• Non-mutagenic. • Non-cytotoxic. • Does not cause erythematous or edema reactions. • Not sensitizing. • Does not cause systemic toxicity.

ISO standards for Denture Teeth:

• EN-ISO 22112: 2017 (Dentistry - artificial teeth for dentures) • Flexural strength, water absorption and water solubility in accordance with EN-ISO 10477 (Dentistry - Polymer-based crowns and veneering materials) type 2 class 2

Color:

• A1
• A2
• A3
• A3.5
• B1
• B2

Package:

• 1l

The Permanent Crown resin is a dental, biocompatible material for 3D printing in the SLA technology. The material in the natural color of the tooth enamel is suitable for the production of permanent, full-contour prosthetic restorations. Permanent Crown resin is a hybrid material with a ceramic filling. The prints have a perfect fit, low water absorption and a smooth finish. Crowns made of this material are less prone to aging, discoloration or plaque build-up. Permanent Crown resin is available in 4 VITA shades (A2, A3, B1, C2).

Application:

• permanent single crowns,
• contributions,
• outlays,
• veneers

The resin is a medical device as defined in the EU Medical Device Directive (93/42 / EEC) and in Chapter 201 (h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with CB provisional resin have been assessed according to ISO 10993-1: 2018 (Part 1: Assessment and testing as part of a risk management process) and ISO 7405: 2009 / (R) 2015 (Dentistry - Biocompatibility Assessment).

• Printing on a stainless steel build plate

Package:

• 1L

Resin for making models for crowns, models for bridges, models for aligners, prosthetic models, diagnostic models and implant models.

Benefits:

• the models are extremely hard after the printing and final exposure process
• available in Sand - "sand", Gray - "gray" and Night - "night"
• the resin has a low viscosity.
• faster printing process, easy cleaning and less material consumption
• precise printed and perfect reproduction of the smallest details
• The NYTE3D model has been specially developed for dental laboratories and can be used in devices with a wavelength of 385 nm and 405 nm. You are free to decide whether you will use the material in your LCD printer or DLP printer.

Technical data:

• 3.5% bending stress 65.7 ± 3.4 MPa
• Bending strength 71.2 ± 4.2 MPa
• Bending deformation 4.93 ± 0.13%
• Modulus of elasticity 2484 ± 145 MPa
• Shore D hardness 90 ± 1
• Viscosity 220 mPa · s
• Wavelength range 385-405nm

Package:

• 1 kg

Benefits:

• burns out almost residue-free. This makes it perfect for all kinds of casting indications.
• can be used for works made of lithium disilicate.
• very low expansion
• high accuracy of models
• short exposure times and high reactivity ensure precise printing and perfect reproduction of the smallest details

Technical data:

• 3.5% of the bending stress 63.7 ± 2.9 MPa
• Modulus of elasticity 2498 ± 115 MPa
• Wavelength range 385-405nm
• Bending strength 72.2 ± 3.2 MPa
• Shore D hardness 90 ± 1
• Bending strain 5.03 ± 0.23%
• Viscosity 220 mPa · s

Package:

• 1 kg

** Benefits:**

• the color of the resin faithfully reflects the color of the gums for a model that is perfectly suited to the job
• does not stick to the hand or model
• high tear strength
• the resin is soft and flexible, perfect for making implant models.
• it can be used in devices with a wavelength of 385 nm and 405 nm.

Package:

• 500g