Formlabs Soft Tissue Starter Pack Form 3 3D printer resin set

Soft Tissue Starter Pack for Form 3. Starter pack for soft tissues.

Features:

• allows you to create your own Soft Tissue Resin in custom-matched shades of pink (dark, medium, and light);
• allows for 3D printing of flexible gingiva masks, used in combination with rigid dental models;
• thanks to the addition of removable, flexible elements imitating soft tissues to the produced models, you can verify the accuracy of prosthetic restorations on implants with full confidence.

Packaging:

• 1 set

Detax Freeprint crown resin 500g

Light-curing, ceramic-filled resin for 3D printing. For the production of permanent crowns, inlays, onlays, veneers, prosthetic teeth, and long-term temporary crowns and bridges. For DLP printers with a wavelength of 385 nm. Does not contain MMA or THF-MA.

Class IIa medical device.

Curing recommendations:

• Recommended lamp: We recommend using the Otoflash G171-6 lamp for curing.
• Medical printing (biocompatible): For medical resins, it is necessary to use a lamp with a nitrogen (N₂) connection.

Note:

• The final color of the finished work may differ slightly from the shade guide – this depends on the model of the printer and curing lamp used.

Colors: - A1, A2, A3, A3,5, B1, B3, C2, D3, BL.

Features:

• very high fracture and abrasion resistance;
• natural translucency and opacity;
• easy to grind and polish;
• high biocompatibility;
• no discoloration due to low water absorption;
• long-term color stability;
• excellent bonding with classic dental cements.

Physical data:

• flexural strength > 115 MPa;
• modulus of elasticity > 2800 MPa;
• final hardness > 50 Barcol;
• water absorption at 40 g/mm3;
• solubility 7.5 g/mm3.

Packaging:

• 1 pc.

Dreve resin FotoDent biobased model 385nm beige opaq 1kg

Biobased® 385nm model

Biobaset t® model is a light-cured resin consisting of 50% renewable raw materials. The material properties are ideal for the production of models (also the above-mentioned Aligner). The FotoDent® bio-based model can be cleaned using the FotoClean program.

Advantages:

• Less pollution in the atmosphere.
• Free from carcinogenic materials.
• Shorter cleaning times.

Material data:

• Color beige opaque.
• Modulus of elasticity ≥ 2200 MPa.
• Viscosity ~ 0.6 Pa s.
• Bending strength ≥ 95 MPa.

Packaging:

• 1kg bottle.

Formlabs Dental Model V3 Form 3 3D printer resin 1 liter

Model Resin V3 (Form 3). Designed for crown and bridge models with removable dies.

Dental Model Resin is a high-precision resin with high accuracy.

Version 3:

• this version of Model Resin is a reformulation of the previous version;
• thanks to the new V3 resin, you can print even more accurate models in half the time;
• supports print resolutions: 100 and 50 microns;
• requires Form 3 Resin Tank V2.1 or newer for Form 3B and Form 2 Resin Tank LT for Form 2;
• post-curing is required, after printing, the finished parts require additional curing (exposure).

Packaging:

• 1 pc.

Senertek resin for temporary crowns Temp V5 500g

Senertek TEMP is a high-quality light-cured resin designed for 3D printing of temporary dental restorations such as crowns and bridges.

This material offers a perfect combination of aesthetics, durability and functionality.

Characteristics:

• natural aesthetics: all shades provide a high-quality aesthetic finish that blends harmoniously with the patient's natural teeth;
• strength and stability: provides crack-resistant temporary restorations with high hardness and low shrinkage;
• biocompatibility: safe for intraoral use, does not cause adverse reactions;
• Versatile: ideal for a wide range of temporary dental applications such as crowns, bridges and veneers;
• for use in printers with DLP, SLA, LCD technology;
• visible on X-ray photographs;
• filled with 40% nanoceramics;
• does not change color over time.

Application:

• for temporary removable dental prostheses;
• individual temporary crowns;
• contributions, outlays;
• temporary bridges;
• temporary veneers.

Resin parameters:

• bending strength: 260 MPa;
• water absorption: <20μg/mm³;
• water solubility <1.2μg/mm³;
• hardness: 95 Shore D;
• viscosity : 1900 CPS.

Packaging:

• 500g

Dreve FotoDent denture resin 385 nm pink transparent 1kg

Light-curing resin for the production of denture bases.

The material provides accurate results with exceptional dimensional stability.

The FotoDent® denture is MMA-free and color-stable.

Material data:

• Final hardness 80 Shore D.
• Elastic modulus > 2000 MPa.
• Bending strength > 80 MPa.
• Viscosity 0.4-0.6 Pa·s.
• Transparent pink color.

Packaging:

• 1 kg

Formlabs Precision Model V1 Form 4 3D printer resin 1 liter

Precision Model Resin Form 4. A high-accuracy material, this next-generation model resin was developed to leverage the new Form 4 ecosystem. It creates beautiful models with crisp edges thanks to its high opacity, beige color, and smooth, matte finish.

Precision Model Resin is the next generation of model resin for the new Form 4 printer series, printing three times faster while offering improved accuracy and aesthetics.

It was developed to achieve the highest possible precision, repeatability, and aesthetics. It is perfect for creating highly accurate dental models (prosthetic, implant) as well as general applications requiring perfect detail reproduction.

Features:

• ultra-high precision: guarantees perfect dimensional fit – over 99% of the printed surface is within 100 μm of the digital CAD design;
• extreme print speed: optimized for LFD technology in Form 4 series printers, the resin prints up to 3 times faster compared to previous versions of model resins (allowing, for example, printing 8 dental models in about 90 minutes);
• plaster-like, matte appearance: the resin has a beige color with high opacity and a smooth, matte finish. This eliminates light reflections and facilitates precise visual assessment of fine edges (e.g., margin lines in dentistry) and enables seamless scanning with laboratory scanners.
• lightning-fast post-processing: finished parts require a short, just 5-minute wash in isopropyl alcohol (IPA) and a 5-minute post-cure in a lamp at room temperature (without turning on the heater).

Applications:

• prosthetic models (crowns, bridges);
• implant models and implant analogs;
• models with complex, removable dies;
• diagnostic models.
• precise engineering prototypes, miniatures, and general-purpose applications requiring sharp edges and smooth surfaces.

Specifications and compatibility:

• color: beige (Beige, Matte);
• supported layer height: 25 and 50 microns;
• compatible printers: Form 4, Form 4B, Form 4L, Form 4BL;
• required tank: Form 4 Resin Tank / Form 4L Resin Tank;
• required platform: Form 4 Build Platform (standard or Flex).

Packaging:

• 1 pc.

Detax resin Freeprint splintmaster taff 1000g

Light-curing, flexible resin for 3D printing.

Characteristics:

• for making flexible splints, repositioners, mouth guards, splints and bite plates;
• biocompatible;
• for DLP printers with a wavelength of 385 nm;
• Class IIa medical device.

Advantages:

• very high wearing comfort;
• no tension;
• long-term durability and stability;
• high impact resistance;
• easy to care for, clean and polish;
• no MMA, THF-MA and TPO;
• neutrality of smell and taste.

Technical specifications:

• tensile strength > 40 MPa;
• elongation > 20%;
• tear strength > 140 N/mm;
• final hardness > 75 Shore D;
• water absorption < 32 µg/mm³;
• solubility < 5 µg/mm³.

Packaging:

• 1 pc.

Detax resin Freeprint splintmaster flex 1000g

Light-curing, highly flexible resin for 3D printing.

Characteristics:

• for making flexible splints, repositioners, mouth guards, splints and bite plates;
• biocompatible;
• for DLP printers with a wavelength of 385 nm;
• Class IIa medical device.

Advantages:

• very high wearing comfort;
• no tension;
• long-term durability and stability;
• high impact resistance;
• easy to care for, clean and polish;
• no MMA, THF-MA and TPO;
• neutrality of smell and taste.

Technical specifications:

• tensile strength > 25 MPa;
• elongation > 50%;
• tear strength > 110 N/mm;
• final hardness > 65 Shore D;
• water absorption < 32 µg/mm³;
• solubility < 5 µg/mm³.

Packaging:

• 1 pc.

Detax resin Freeprint temp 500g

Light-curing, biocompatible resin for printing temporary crowns and bridges.

Advantages:

• light spectrum 385 nm;
• exceptional resistance to cracking and bending;
• high abrasion resistance;
• natural tooth aesthetics, shiny, translucent colors;
• easy surface treatment and polishing, which can be individually characterized using composites;
• low viscosity ensures low material consumption and faster cleaning;
• resistant to oral conditions, no odor or taste irritations;
• Class IIa medical device;
• colors: A1, A2, A3.

Technical specifications:

• bending strength > 100 MPa;
• flexural modulus > 2300 MPa;
• water absorption < 40 µg/mm3;
• solubility < 7.5 µg/mm3;
• hardness > 40 Barkol.

Packaging:

• 1 pc.

Detax resin Freeprint splint 2.0 500g

Light-curing, biocompatible 3D printing resin for the production of implant templates, transfer keys and bite splints.

Characteristics:

• light spectrum 385 nm;
• transparent formula for visual control in the work area;
• process reliability due to high initial hardness and final strength;
• low viscosity ensures low material consumption and faster cleaning;
• highest mechanical resistance to bending and cracking;
• neutral smell and taste;
• medical device class IIa;
• color: transparent.

Technical specifications:

• color/appearance transparent, translucent;
• flexural strength > 80 MPa (DIN EN ISO 20795-2);
• flexural modulus > 2000 MPa (DIN EN ISO 20795-2);
• Shore D hardness > 80–82 Shore D;
• water absorption < 32 µg/mm³ (DIN EN ISO 20795-2);
• solubility < 5 µg/mm³ (DIN EN ISO 20795-2);
• biocompatibility Complies with ISO 10993-1 (class IIa);
• recommended wavelength 385 nm (dental DLP printers).

Packaging:

• 1 pc.

Detax resin Freeprint cast 2.0 500g or 1000g

Light-curing 3D resin for the production of precision casting objects (skeletons).

Advantages:

• for all UV printers with a 385 nm light spectrum;
• excellent dimensional stability after printing ensures safe application with fit control, especially for cast models and molds;
• Printing results are precise and distortion-free, even for extremely delicate and complex models;
• any corrections or repairs after printing are possible using easyform gel LC;
• Viscosity and optimized cure depth help reduce printing time and material consumption and facilitate faster cleanup;
• burns without leaving any residue in the mold and is the basis for high-quality modeling results that ensure a perfect fit;
• color: red.

Packaging:

• 500g or 1000g

Keystone resin KeySplint Soft 1kg

KeySplint Soft resin is fully biocompatible and complies with international regulations and standards for medical devices.

Using unique technologies, Keystone Industries has developed a one-of-a-kind 3D printing resin for the production of flexible dental splints and night guards.

This DLP-optimized resin is a unique printable material that combines the strength needed to protect teeth from disorders like bruxism with added flexibility for greater patient comfort.

KeySplint Soft is also easy for the patient to clean.

Characteristics:

• can be printed on the Mars 5Ultra 9K printer (micran code 8572);
• the solid formula allows for a three-year guaranteed shelf life;
• is color stable and has been proven in many open-source printers.
• no other dental splint resin offers the quality and performance of KeySplint Soft.

Advantages:

• biocompatible;
• transparent;
• easy to polish;
• resistant to discoloration.

Physical data:

• flexural strength 2.6-4.4 MPa (ISO 20795-2);
• Young's modulus 1356 MPa (ASTM D790);
• final hardness 82 Shore D;
• water sorption <18 µg/mm³ (ISO 20795-2).

Packaging:

• 1kg

Formlabs Standard V4.1 Form 3 3D printer resin 5 liters

Standard resin for creating anatomical models for training and diagnostic purposes.

Color:

• Clear;
• Grey.

Grey Resin V4.1 is an updated photopolymer resin for SLA 3D printing that combines high accuracy, increased strength, and excellent detail. The Grey V4.1 version provides a richer shade of grey, a uniform matte finish, and consistent printing results. With a capacity of 5 liters, this resin is an ideal choice for large-scale production, engineering prototyping, and mass production of models.

Clear Resin V4.1 is an extremely rigid material created for special tasks, which, after polishing, allows for an almost perfect glass effect (full optical transparency). It was designed for models that work with light or have complex internal structures that you want to showcase.

Features:

• excellent shape reproduction;
• durability;
• excellent surface quality.

Compatibility:

• designed for Formlabs Form 3 and Form 3L printers.

Packaging:

• 1 pc.

Formlabs VarseoSmile TriniQ Resin Form 4B 3D printer resin 750g

Formlabs BEGO™ VarseoSmile® TriniQ® resin is a versatile, ceramic-filled, biocompatible material designed for both temporary and permanent restorations, including single units such as crowns, inlays, onlays, veneers, bridges, and denture teeth.

BEGO™ VarseoSmile TriniQ is the first 3D printing resin designed for permanent bridges, characterized by excellent accuracy, translucency, and an efficient process.

Curing recommendations:

• Recommended lamp: We recommend using the Otoflash G171-6 lamp for curing.
• Medical printing (biocompatible): For medical resins, it is necessary to use a lamp with a nitrogen (N₂) connection.

Note:

• The final color of the finished work may differ slightly from the shade guide – this depends on the model of the printer and curing lamp used.

Available in three VITA shades:

• A2;
• A3;
• B1.

Features:

• wide spectrum: for permanent and temporary restorations and removable denture elements;
• aesthetics: available in three popular VITA shades (A2, A3, B1), allowing for a perfect match to the patient's natural teeth;
• innovation: certified for permanent prosthetic bridges.

Printer compatibility: Form 4B

• compatible with Form 4 resin tank;
• compatible with Form 4 Flex build platform;
• biocompatibility certified.

Material properties

• flexural strength: 120 MPa;
• flexural modulus: 3600 MPa;
• Shore hardness: ≥ 90 D;
• sorption: < 0.6 µg/mm³;
• Solubility: < 12 µg/mm³;

Packaging:

• 1 pc.

V-Print dentbase pink 1000 g

Light-curing resin for printing removable denture plates.

Indications:

• Removable denture plates

Advantages:

• Class IIa medical device

• Comfort of wearing the prosthesis – thanks to precision of workmanship and perfect fit.

• High aesthetics – natural gingival color.

• Compatibility – use with available lining materials.

• Safe removal from build platform.

• Patient acceptance - no taste or smell.

• Biocompatibility.

Packaging:

• 1000g

Ivotion Base Print 3D printing resin for denture plates 1000ml

Aesthetic base material for 3D printed prostheses, enabling efficient production of prostheses in proven PMMA quality.

Ivotion Base Print is the first 3D printing material for permanent applications from Ivoclar (material quality meets the requirements of the EN ISO 20795-1 standard.)

Drawing on Ivoclar's extensive experience in materials, Ivotion Base Print provides high-quality, durable and aesthetic denture bases with exceptional wearing comfort and high accuracy of fit.

Characteristics:

• Ivotion Base Print is available in three shades, allowing you to create individual dentures with a natural look;
• the material is characterized by a low tendency to plaque formation and discoloration.
• Ivotion Base Print can be used in the PrograPrint system and other approved printing systems within the approved process: Ivoclar: PrograPrint PR5, Asiga: Max, Max 2, MAX X, Ultra, Pro 4K, Pro 4K XL.

Packaging:

• 1000ml

V-Print Try-In beige 1000 g

Light-curing resin for the production of trial prosthetic restorations.

Indications:

• Trial full and partial dentures.

• Transfer and sanding templates.

• Corrective and occlusal impressions.

Advantages:

• Initial check-up before making the final prosthesis – checking and, if necessary, adjusting and correcting occlusion, function, pronunciation and aesthetics.

Packaging:

• 1000g

SG Surgical Guide Next Dent resin orange 1kg

NextDent SG Surgical Guide is a biocompatible class I material developed for printing surgical guides.

Due to their high accuracy, they facilitate insertion of the sleeve immediately after printing.

This allows for even greater precision during surgery.

NextDent SG material is resistant to disinfectants.

The material can also be sterilized using gamma radiation and autoclave.

The use of an autoclave does not affect the dimensional stability of the material.

Technical data:

• material strength ≥ 85 MPa;
• tensile strength ≥ 2118 MPa
• residual monomer < 0.1;
• biocompatible, non-toxic;
• orange color.

Packaging:

• 1kg

VarseoSmile TriniQ żywica 3D 250g

Żywica VarseoSmile TriniQ wyróżnia się innowacyjnym składem, a dzięki wysokiej stabilności materiału, umożliwia wydruk nie tylko stałych mostów, ale także rozległych uzupełnień tymczasowych.

Doskonałe właściwości polerowania i wyjątkowa przezierność gwarantują najwyższą estetykę.

Zalecenia dotyczące utwardzania:

• Rekomendowana lampa: Do utwardzania zalecamy użycie lampy Otoflash G171-6.
• Drukowanie medyczne (biokompatybilne): W przypadku żywic medycznych niezbędne jest użycie lampy z przyłączem azotu (N₂).

Uwaga:

• Ostateczny kolor gotowej pracy może delikatnie różnić się od kolornika – zależy to od modelu użytej drukarki oraz lampy utwardzającej.

Zalety:

• wysoka siła wiązania z konwencjonalnymi cementami adhezyjnymi zapewnia niezawodne osadzanie w ustach pacjenta i długi czas stosowania uzupełnień;
• wydajny proces drukowania 3D umożliwia szybkie i produktywne wytwarzanie uzupełnień, skracając czas leczenia i umożliwiając skuteczne leczenie większej liczby pacjentów;
• wyjątkowa stabilność materiału umożliwia tworzenie trwałych i wysoko estetycznych uzupełnień. Daje możliwość druku koron i mostów tymczasowych oraz ostatecznych;
• doskonałe właściwości polerowania oraz przezierność, umożliwiają tworzenie uzupełnień, które płynnie wtapiają się w naturalne uzębienie;
• żywica wykazuje stopień ścieralność podobny do dwukrzemianu litu, a także jest przyjazna dla zębów przeciwstawnych;
• jest nie tylko trwała, ale także optymalnie integruje się z naturalną strukturą zęba;
• łatwość odbudowy i naprawy przy użyciu konwencjonalnych kompozytów zwiększa długoterminową stabilność uzupełnienia i optymalizuje elastyczność leczenia;
• doskonała stabilność koloru zapewnia trwałe efekty estetyczne;
• dzięki wyjątkowej biokompatybilności i współczynnikowi konwersji podwójnego wiązania wynoszącemu prawie 100% przewyższa większość materiałów kompozytowych.

Dane Techniczne:

• kolory wg kolornika Vita;
• lepkość 1900-6000 mPa*s;
• wytrzymałość na zginanie 120 MPa;
• absorbcja wody 12,00 µm/mm³;
• rozpuszczalność w wodzie 0,06 µm/mm³;
• twardość powierzchniowa; 90 Shore D;
• długość fali utwardzania 385 – 405 nm.

Opakowanie:

• 250g

Formlabs Resin Pump for Form 3

Formlabs resin pump.

The resin pumping system for Form 3 series stereolithography (SLA) 3D printers smoothly delivers resin from a 5L resin cartridge directly into the printer's tank.

Reduce waste by 86%.

Package:

• 1 pc.

V-Print IBT 1000g

Biocompatible Class I resin, for orthodontic applications.

Digitally designed transfer splints enable precise transfer of several brackets to an ideal, virtually pre-determined position on the teeth. This allows not only for more accurate placement, but also for a more effective treatment procedure.

Indications:

• Orthodontic transfer splints for installing brackets.

Advantages:

• Easy to use.
• The translucent V-Print IBT is flexible and allows for easy application and removal of the splint in the patient's mouth.
• No shaking - ready for immediate use.
• Virtually planned brackets are precise, glued safely and faster.

Packaging:

• 1000g

Formlabs Dental LT Clear V2 Form 4 3D printer resin 1 liter

Dental LT Clear Resin V2 is a long-term biocompatible material for printing affordable, high-quality hard splints and occlusal guards.

Features:

• highly durable and fracture-resistant material;
• resistant to discoloration over time;
• high aesthetics and durability.

Technical data:

• tensile strength: 52 MPa;
• tensile modulus: 2080 MPa;
• elongation: 12%;
• flexural modulus: 2.3 GPa;
• notched IZOD impact strength: 449 J/m;
• Shore D hardness: 78D.

Packaging:

• 1 pc.

3D Eco FLOW resin 1 liter + SECRET AGENT welcome kit (40g powder + 2x10 ml liquid)

Eco FLOW 3D resin for 385/405nm printers. Characterized by high printing speed, low shrinkage, high precision, high hardness, and adequate durability.

ECO FLOW resin is a material that meets the highest requirements of modern digital dentistry.

It was designed with versatile use in mind.

Application:

• printouts of diagnostic models;
• prints of orthodontic models;
• prints of working, implant and demonstration models;
• prints of models for embossed splints and acrylic relaxation splints.

Characteristics:

• high strength and resistance to cracks and fractures;
• color stability and aesthetic appearance of models;
• perfect reproduction of details even in the most demanding projects;
• low viscosity for easy work and cleaning;
• dimensional stability after post-curing;
• compatibility with open 3D printer systems (385/405 nm).

Technical data before hardening (liquid state):

• viscosity: 150-300 cP;
• density: 1.10-1.20 g/cm3.

Technical data before hardening (solid state):

• hardness: 80-85 Shore D;
• bending strength: 70–100 MPa;
• tensile strength: 35–60 MPa;
• colors: beige, grey;
• flexural modulus: 2000–2500 MPa;
• tensile modulus: 550–950 MPa;
• elongation at break: 8–12%.

Compatible printers:

• All with an open 385/405 nm material system, in particular:
• PhrozenSonic Mini 4K, Sonic Mini 8K, SonicMighty 4K, and others…
• AnycubicPhoton 4K, Mono X6K, and others…
• ASIGA MAX385

Packaging:

• 1 pc.

Detax resin Freeprint denture flex pink-transparent 1000g

MDR-certified, light-cured, biocompatible resin for printing flexible removable partial dentures.

For DLP printers with a wavelength of 385 nm.

Does not contain MMA, THF-MA or TPO.

Class IIa medical device.

Advantages:

• short production time, which eliminates labor-intensive work methods;
• the elastic properties of the material ensure high wearing comfort for the patient;
• precise 3D printing and thin material structure ensure a perfect fit and natural look without metal clasps;
• quick processing and easy polishing.

Physical data:

• tensile strength approx. 45 MPa (DIN EN ISO 527-1);
• tensile elongation > 20% (DIN EN ISO 527-1);
• final hardness 78 on the Shore D scale;
• water absorption < 32 µg/mm³ (DIN EN ISO 20795-1);
• solubility < 1.6 µg/mm³ (DIN EN ISO 20795-1).

Packaging:

• 1 pc.

Formlabs Standard Grey V4 Form 3 1L Resin V4 Sale

V4 version sale.

The printing material in SLA technology is a liquid photopolymer resin hardened by a laser beam.

Formlabs standard materials are the most versatile resins for all applications.

Strandard resins maintain high model accuracy without the risk of losing strength.

Stiffness, durability, the ability to produce advanced details and the final smoothness of the print contribute to the wide use of the resin in various industries as well as in medicine.

Color:

• gray (Grey);

Application:

• concept models and prototypes;
• transparent elements;
• models requiring a smooth surface.

Physical data:

• tensile strength 63 PMa.
• elongation at break 6%;
• Shore hardness D75;
• modulus of elasticity 2.2 GPa.

Packaging:

• 1l

Detax resin dx denture impact 1000 g

dx denture impact resin – a new premium resin for 3D printing of full dentures.

New formula for increased durability and strength in everyday use.

Characteristics:

• has an MDR certificate;
• high resistance to cracking, easy processing and low water absorption ensure long-term color stability and exceptional durability;
• a reliable duo, combined with dx crown resin, creates a proven set – without the need to use additional bonding systems;
• When using denture impact resin, you can be 100% sure that the Molloplast B soft relining material will adhere perfectly to it and will not detach in the patient's mouth, because the entire process has been validated.

Technical specifications:

• product classification: class IIa medical device;
• bending strength: ≈ 80 MPa;
• modulus of elasticity: 2150 MPa;
• water absorption: < 32 µg/mm³;
• solubility: < 1.6 µg/mm³;
• hardness: ≈ 83 Shore-D;
• viscosity: 700 mPas.

Packaging:

• 1kg

V-Print tray blue 1000 g

Light-cured resin for the generative production of custom trays, base plates and occlusal templates.

Indications:

• Individual impression trays, trays for functional impressions.
• Occlusal templates and trial prostheses plates.
• Short circuit registration.

Advantages:

• Time saving - ability to print with large layer thicknesses (up to 200 µm).
• Distortion-free impressions – thanks to high durability.
• Universal – suitable for all types of impression materials.
• Speed and efficiency – printing various elements, e.g. shaping edges, making retention elements or recesses for implant impressions.

Packaging:

• 1000g

NYTE 3D resin Model Flamingo 1kg

With a shade that mimics natural gum tissue, the NYTE3D Model Flamingo enables realistic 3D printing of gingival areas of dental models.

NYTE 3D Model resin was developed specifically for dental laboratories and can be used in devices with a wavelength of 385 nm and 405 nm.

You are free to decide whether you will use the material in an LCD or DLP printer.

Characteristics:

• short exposure time;
• the models are extremely hard after the printing process and after exposure, excellent working properties of the prints;
• high reactivity of the material shortens the exposure time by up to 50%;
• the resin has a low viscosity.

Advantages:

• faster ways to print;
• easy cleaning;
• less material consumption.
• short exposure times,
• perfectly reproduced edges;
• high opacity and high reactivity.

Technical data:

• 3.5% bending stress 65.7 ± 3.4 MPa;
• bending strength 71.2 ± 4.2 MPa;
• bending strain 4.93 ± 0.13%;
• flexural modulus 2484 ± 145 MPa;
• Shore D hardness 90 ± 1;
• viscosity 220 mPa s;
• wavelength range 385-405nm.

Packaging:

• 1kg

Resione 3D resin F80 Gingival-like 0.5kg

F80 is a soft and flexible resin, pink in color, particularly suitable for creating models of dental gums.

F80 resin can retain its softness even at lower temperatures.

Advantages:

• F80 resin prints have a Shore hardness of 50-60A, are soft to the touch and flexible.
• F80 resin prints are characterized by good elasticity and quickly regain their shape after deformation.
• Even at temperatures below 10°C, F80 prints remain soft, although their flexibility decreases as the temperature drops.
• F80 resin is suitable for all popular LCD/MSLA/DLP 3D printers on the market, including RGB or monochrome printers.
• Printer Compatibility - All series Anycubic, Asiga, Solus, Miicraft, Kudo3d, Flashforge, Makex, Shining etc. 385-410nm DLP UV resin 3D printer.

Mechanical properties:

• ASTM Shore Hardness: D2240-05 50-60A.
• Tensile strength ASTM: D638-14 3.8 MPa.
• Tear strength ASTM: D624-98 9.75 KN/m.
• Elongation at break ASTM: D638-14 159%.
• Viscosity (25℃) ASTM: D4212-10 2300mpa.s.

Manufacturer's recommendations:

• If the resin will not be used in the 3D printer for more than 1 day, it is recommended to filter the resin using a funnel with a filter and pour it into an empty container. Do not pour the resin from the tank back into the original bottle to avoid contamination with other resins.

Packaging:

• 500g

Syntegre resin Evocure Model PRO 1kg

Advanced 3D resin for printing dental models.

Take your dental model production to unattainable precision and durability with our EVOCURE MODEL PRO resin.

Specially developed for the production of solid or hollow dental models.

High-performance resin guarantees precise and durable results even in the most demanding applications.

The resin has unique features such as high temperature resistance, ultra-precision and high surface hardness, ensuring exceptional performance in harsh conditions.

Colors selected by the best dental technicians not only increase the visibility of the preparation edges but also facilitate working with the colors of prosthetic restorations.

EVOCURE MODEL PRO is compatible with LCD/DLP 3D printers with a wavelength range of 385nm to 405nm.

It is the perfect choice for advanced professionals who value the highest quality and the perfect combination of precision, durability and ease of use.

It will be used in the production of implant models, crowns and bridges, wax-ups, for the production of thermoformable splints and others.

Colors:

• DESERT SAND;
• SPACE GREY;

Application:

• implant models;
• working models for crowns and bridges;
• models for thermoformable rails;
• master models;
• wax-up models;

Characteristics:

Low viscosity

• EVOCURE resins have high fluidity to speed up the printing process, facilitate cleaning, and reduce residue during the printing process;

Speed

• Thanks to their high reactivity and wavelength versatility, EVOCURE resins have a short exposure time of the printed layer, which translates into lower wear of the optics and high work ergonomics;

The smallest details

• low viscosity, high reactivity and appropriately selected color parameters translate into prints with high detail and sharpness of even the smallest details;

Ultra accuracy

• Thanks to their refined parameters, EVOCURE resins are not only compatible with various printing systems available on the market, but also ensure excellent dimensional accuracy;

Surface resistance

• EVOCURE resins are characterized by increased surface resistance to scratching, which is particularly useful when performing orthodontic work, and also facilitates and protects the post-curing process;

Increased temperature resistance

• a special formula thanks to which the models do not deform, and the thermoformed rail can be easily separated from the model without damaging them.

Technical Data:

• BENDING STRENGTH - 89-94 MPa;
• MODULE OF ELASTICITY - 2500-2600 MPa;
• BENDING DEFORMATION - 5.50-5.70%;
• SHORE HARDNESS D - 84-87 D;
• VISCOSITY - 145-165 mPa*s;
• WAVELENGTH RANGE - 385nm – 405nm.

Packaging:

• 1000g

V-Print cast blue 1000 g

Light-curing resin for printing elements fired during casting and pressing.

Indications:

• Production of elements that are completely removed from the mold before the casting or pressing process, leaving no residues.

Advantages:

• Repeatable – simple duplication before casting.

• Fast finishing, precision.

• Printed elements guarantee high quality reproduction.

• High dimensional stability and edge strength - safe checking of occlusion and lateral movements.

• Excellent compatibility – the resin can be used with available refractory compounds.

Packaging:

• 1000g

V-Print model 2.0 beige 1000 g or 5000 g

Light-curing resin for printing dental models.

NO SHAKE – ALWAYS HOMOGENEOUS!

Indications:

• Working and demonstration models.

Advantages:

• Speed and accuracy – optimal adjustment even with layers 100 μm thick.

• Safe machining – no undesirable surface changes (e.g. caused by increased tool temperature).

• Surface resistance to scratches - high hardness allows optimal adjustment of prosthetic restorations without their deformation.

• The product can be used in thermoforming devices - precise work, obtaining models for overlays and retainers.

Packaging:

• 1000g or 5000g

Formlabs Denture Base V1 Form 4 3D printer resin 1 liter

Denture Base Resin is a biocompatible material for producing durable, wear-resistant denture bases and temporary dentures at a fraction of the cost of traditional methods.

With 3 available shades (OP, RP), technicians can achieve realistic gums with natural margins, using either 3D printed prosthetic teeth or prefabricated teeth.

Technical Specification:

• printing technology: SLA;
• biocompatibility: skin contact, mucous membrane contact;
• minimum layer thickness: 50 microns;
• categories: dentistry (Dental);
• colors: OP, RP;
• application: dentistry;
• flexural strength: 50.0 MPa;
• density: 1.15 g/cm³ < X < 1.25 g/cm³;
• curing required.

Packaging:

• 1 pc.

Resione 3D resin C01 Dental Castable 1kg

C01 is a transparent, green resin intended for use in dentistry.

• It is mainly used for casting nickel-chromium and cobalt-chromium alloys.
• C01 ensures high precision in both form and dimensions, it is the ideal choice for the production of crowns, bridges and frames that ensure a perfect fit every time.
• The excellent fluidity of this resin speeds up the 3D printing process and produces prints with clear details and high shape accuracy.
• Additionally, C01 resin has high stiffness and does not require additional hardening, which saves time.
• Prints also do not require thick supports, and the supports can be easily removed, leaving no pits on the surface and reducing manual sanding time.

Advantages:

• The C01 resin has been specially designed for dental applications and is suitable for centrifugal casting at 900°C without residue.
• High precision, whether in terms of shape accuracy or dimensional accuracy, the cast crown, bridge or framework will fit perfectly into the patient's mouth.
• Excellent fluidity, the viscosity of the resin is only 100 mpa.s, which is close to the fluidity of water, accelerates the speed of 3D printing. And the low viscosity features make the details of prints clearer and the shape accuracy higher.
• It does not require additional hardening, it has high stiffness when first formed, the surface of the printed part does not stick after washing, so it does not require additional hardening, which saves time.
• The supports can be easily removed, the appropriate mechanical properties mean that C01 prints do not require too thick supports, so the supports can be easily removed, leaving no pits on the surface, saving manual sanding time.

Mechanical properties:

• Viscosity (25℃) ASTM: D4212-10 100mpa.s
• ASTM Shore Hardness: D2240-05 78D
• Tensile strength ASTM: D638-14 26MPa
• Elongation at Break ASTM: D638-14 4.50%
• Bending strength ASTM: D790-10 39MPa
• ASTM modulus of elasticity: D790-10 400MPa

Packaging:

• 1 kg

VOCO V-Print SG clear 1000 g

Light-curing resin for printing dental surgical templates.

Indications:

• Dental surgical templates

Advantages:

• Class IIa medical device.

• Perfectly accepted by patients - tasteless and odorless.

• Optimal patient safety.

• The templates can be sterilized in an autoclave at 134°C for 5 minutes.

• Dimensional stability – perfect fit, even after autoclaving.

• Biocompatibility.

Packaging:

• 1000g

Formlabs IBT Flex V1 Form 4 3D printer resin 1 liter

IBT Flex Resin is a Class I biocompatible material with increased flexibility, durability, and transparency, which guarantees optimal clinical results while ensuring an excellent patient experience and seamless, precise transfer of orthodontic brackets and composite filling materials.

Features:

• increased elongation and flexibility;
• seamless intraoral placement and removal, ensuring fast and accurate bracket placement and perfect tray seating on the dentition;
• optimized transparency and color;
• this new formula allows for easy visualization of important elements such as brackets, composite filling materials, and teeth;
• high print accuracy and predictable results;
• certified biocompatible, FDA registered.

Material properties:

• tensile strength: 7.2 MPa;
• tensile modulus: 8 MPa;
• elongation at break: 135%;
• Shore A hardness: 77 - 80 A;
• transparency (2 mm): 85%;
• chemical disinfection: 70% isopropyl alcohol for 5 minutes.

Packaging:

• 1 pc.

RAYSHAPE resin Model PRO Orange 2.5kg

Resin Model Pro Orange.

Characteristics:

• high precision: model accuracy of ±0.05 mm;
• resistance to deformation: the dimensional stability of the model remains above 99% even after 15 days;
• wide temperature range: can operate at temperatures from 20°C to 35°C;
• exceptional durability: the model withstands multiple pressing processes, which has minimal impact on its precision and durability;
• storage stability: no problems with pigment settling (sedimentation) or color change during long-term storage.

Application:

• implant models;
• split models;
• orthodontic models;
• prosthetic (reconstructive) models.

Advantages:

• orange color: provides excellent contrast with prosthetic materials, plasters and waxes, which makes it easier for dental technicians to work;
• Print speed: optimized formula for high-speed printers, reducing model production time;
• strength and wear resistance: which is crucial for models that are frequently touched, measured or processed;
• precision: the ability to create models with a very smooth surface and accurate detail reproduction.

Packaging:

• 1kg

VarseoSmile TriniQ 3D resin 500g

VarseoSmile TriniQ resin is distinguished by its innovative composition, and thanks to the high stability of the material, it enables the printing of not only fixed bridges but also extensive temporary restorations.

Excellent polishing properties and exceptional translucency guarantee the highest aesthetics.

Curing recommendations:

• Recommended lamp: For curing, we recommend using the Otoflash G171-6 lamp.
• Medical printing (biocompatible): For medical resins, it is necessary to use a lamp with a nitrogen (N₂) connection.

Note:

• The final color of the finished work may differ slightly from the shade guide – this depends on the model of the printer and curing lamp used.

Advantages:

• high bond strength with conventional adhesive cements ensures reliable seating in the patient's mouth and long-term use of restorations;
• efficient 3D printing process enables fast and productive production of restorations, shortening treatment time and enabling effective treatment of more patients;
• exceptional material stability allows for the creation of durable and highly aesthetic restorations. It allows for the printing of temporary and permanent crowns and bridges;
• excellent polishing properties and translucency allow for the creation of restorations that blend seamlessly with natural dentition;
• the resin exhibits a degree of abrasion similar to lithium disilicate and is also friendly to opposing teeth;
• it is not only durable but also optimally integrates with the natural tooth structure;
• ease of reconstruction and repair using conventional composites increases the long-term stability of the restoration and optimizes treatment flexibility;
• excellent color stability ensures lasting aesthetic effects;
• thanks to exceptional biocompatibility and a double bond conversion rate of almost 100%, it surpasses most composite materials.

Technical Data:

• colors according to Vita shade guide;
• viscosity 1900-6000 mPa*s;
• flexural strength 120 MPa;
• water absorption 12.00 µm/mm³;
• water solubility 0.06 µm/mm³;
• surface hardness >90 Shore D;
• curing wavelength 385 – 405 nm.

Packaging:

• 500g

NYTE 3D resin Model High Contrast Ivory 1kg

3D printing material for dental models with a plaster-like appearance.

NYTE3D Model High-Contrast resin was developed specifically for dental laboratories and can be used in 385 nm and 405 nm wavelength devices.

You are free to decide whether you will use the material in an LCD or DLP printer.

Characteristics:

• Plaster-like appearance, with maximized plaster-like contrasts our high-contrast resin allows for much better visibility of detail;
• short exposure time;
• the models are extremely hard after the printing process and after exposure, excellent working properties of prints;
• high reactivity of the material shortens the exposure time by up to 50%;
• very low viscosity, advantages of low viscosity: faster printer movement, easier cleaning and lower material consumption;
• perfect printing of the smallest details.

Technical data:

• 3.5% bending stress 65.7 ± 3.4 MPa;
• bending strength 71.2 ± 4.2 MPa;
• bending strain 4.93 ± 0.13%;
• flexural modulus 2484 ± 145 MPa;
• Shore D hardness 90 ± 1;
• viscosity 220 mPa s;
• Wavelength range 385-405nm.

Packaging:

• 1kg

Formlabs Dental LT Comfort V1.1 Form 4 3D printer resin 1 liter

Dental LT Comfort Resin is a biocompatible resin for printing flexible occlusal splints, bruxism guards, and teeth whitening trays.

Features:

• splints are easy to polish, allowing for high optical transparency;
• greater wearing comfort and better durability of the splints;
• splints are resistant to impact and wear.

Technical Data:

• tensile strength: 29.1 MPa;
• tensile modulus: 994 MPa;
• elongation: 33%;
• flexural strength: 21 MPa;
• flexural modulus: 643 MPa;
• notched Izod: 98 J/m;
• Shore D hardness: 75D.

Packaging:

• 1 pc.

Formlabs Fast Model V1 Form 4 3D printer resin 1 liter

Formlabs' fastest resin, prints at speeds of over 100 mm per hour.

Allows printing models in minutes or large prototypes in less than two hours.

Compatibility with Form 4, Form 4B printers, Resin Tank Form 4, Form 4 Build Platform, Form 4 Build Platform Flex.

Application:

• prosthetic models;
• orthodontic models.

Color:

• Gray

Advantages:

• Fast Model is the next generation of Draft Resin, designed to use the new Form 4 ecosystem;
• faster - designed to take advantage of the new Form 4 ecosystem for up to three times faster printing;
• stronger and stiffer - 45% higher strength and modulus;
• more opaque and matte color.

Mechanical properties of Fast Model resin:

Room temperature cure for 5 minutes:

• ultimate tensile strength 55 MPa;
• tensile modulus 2500 MPa;
• elongation at break 15%;
• flexural strength 98 MPa;
• flexural modulus 2600 MPa;
• notched Izod 30 J/m;
• heat deflection temperature at 0.45 MPa 58 °C.

Post-cure at 60 °C for 15 minutes:

• ultimate tensile strength 62 MPa;
• tensile modulus 2700 MPa;
• elongation at break 11%;
• flexural strength 106 MPa;
• flexural modulus 2700 MPa;
• notched Izod 37 J/m;
• heat deflection temperature at 0.45 MPa 76 °C.

Packaging:

• 1 pc.

Formlabs Surgical Guide SG V1 Form 3 3D printer resin 1 liter

Surgical Guide Resin Form 3. Surgical Guide Resin is a biocompatible resin suitable for autoclave sterilization. It is designed for applications such as 3D printing of dental surgical guides used in implant placement. This resin has been developed specifically for Formlabs printers and rigorously tested to meet chemical disinfection and steam sterilization (autoclave) standards for implant systems.

For printing:

• surgical templates;
• surgical guides;
• pilot drill guides;
• positioning and sizing templates for dedicated components.

Specification and compatibility:

• supported print resolutions: 100 and 50 microns (Form 2) and 100 microns (Form 3B);
• compatibility: exclusively with Form 2, Form 3B, and Form 3B+ printers. The product is not compatible with the standard Form 3 printer;
• hardware requirements (Form 2): when used with the Form 2 printer, a Resin Tank LT is required;
• post-curing required: after printing, finished parts require additional curing (light exposure).

Meets ISO standards:

• EN ISO 10993-5:2009 (non-cytotoxic);
• ISO 10993-10:2010/(R)2014 (non-sensitizing);
• ISO 10993-10:2010/(R)2014 (non-irritating);
• EN ISO 13485:2016;
• EN ISO 14971:2012.

Packaging:

• 1 pc.

Formlabs Dental LT Clear V2 Form 3 3D printer resin 1 liter

A Class IIa biocompatible resin with high resistance to fracture and wear, making Dental LT Clear ideal for splints, retainers, and other direct orthodontic appliances.

Thanks to its transparent color, high optical clarity is achieved for beautiful end products.

• The material has been evaluated according to ISO 10993-1: 2018.

Applications:

• occlusal splints;
• retainers;
• occlusal guards;
• surgical guides;
• retainers;
• other orthodontic accessories.

Material properties:

• flexural modulus 2300 MPa;
• elongation at break 12%;
• Shore hardness: 78D;
• color transparent.

Packaging:

• 1 liter

Note: The current price promotion (discount) applies only to products available from stock or until 30.04.2026

Formlabs Castable WAX V1 Form 3 3D printer resin 1 liter

Resin for jewelry and dental prosthetics needs.

• Does not require post-print light curing.

The original Castable Wax Resin is designed for creating lost-wax casting models.

The material contains 20% wax and, thanks to its properties, leaves no residue after burnout and accurately reflects the mold contour.

It is suitable for precision casting, allowing for the reproduction of complex surfaces without visible layer lines.

Models do not require additional curing after printing.

Also recommended for dental prosthetics:

• crowns;
• bridges;
• partial dentures;
• frameworks.

Packaging:

• 1 pc.

Formlabs Standard V4.1 Form 3 3D printer resin 1 liter

Standard V4.1 Form 3 resin. The printing material in SLA technology is a liquid photopolymer resin cured by a laser beam.

Formlabs standard materials are the most versatile resins for all kinds of applications.

Standard resins maintain high model accuracy without the risk of losing strength.

Rigidity, durability, the ability to create advanced details, and the final smoothness of the print contribute to the wide application of the resin in both various industries and medicine.

Version V4.1

• improved colors (deeper black/gray, clearer clear);
• more uniform, deep matte;
• increased impact strength and crack resistance;
• Form 3 hardware compatibility;

Colors:

• transparent (Clear);
• white (White);
• gray (Grey);
• black (Black).

Application:

• conceptual models and prototypes;
• transparent elements;
• models requiring a smooth surface.

Physical data:

• tensile strength 53 MPa.
• elongation at break 9-12%;
• Shore hardness D75;
• modulus of elasticity 2.2 GPa.

Packaging:

• 1 pc.

Formlabs Maintenance Kit replacement resin pump tubes

Replacement resin pump tubes.

Over time, pump performance will degrade, resulting in longer fill times.

Resin pump tubes should be replaced every 6 months or when changing resin types.

This kit includes both the internal resin pump tube and the delivery tube to connect the resin pump to the 5-liter resin container.

Package:

• 1 set of tubes

Dreve resin FotoDent cast 385nm/405nm red transparent 1kg Expiration date 06.30.2026

Light-curing resin for printing skeletons.

Characteristics:

• burns without residue;
• transparent red;
• the material is highly compatible: it can be used with all embedding materials available on the market.

Material data:

• bending strength ≥ 100 MPa;
• elongation at break 7.5%-11%;
• modulus of elasticity ≥ 2000 MPa;
• final hardness 80-90 Shore D;
• transparent red;
• viscosity < 0.3 Pa s.

Packaging:

• 1kg

Dreve FotoDent gingiva resin 385nm red opaque 1kg

Light-cured resin for printing a gingival mask.

Durable soft and flexible.

Perfectly combines with models made of resin models.

Material data:

• Final hardness approx. 70 Edge A
• Pink color
• Deformation recovery 100%
• Viscosity approx. 2 Pa·s
• Bending deformation > 40%

Packaging:

• 1 kg.

Dreve FotoDent guide resin 405 nm blue transparent 1kg

Light-curing resin for the production of implant templates.

Dimensionally stable and biocompatible.

Material data:

• Color: transparent blue
• Modulus of elasticity > 1,700 MPa
• Bending strength ≥ 75 MPa
• Elongation at break > 10-15%
• Final hardness > 80-85 Shore D

Packaging:

• 1 kg