Secret Agent Powder hardener for 3D models powder 300g

Hardener for 3D resin models.

Characteristics:

• Secret Agent Powder appears exactly where the problems known to everyone working with 3D resin prints begin;
• when the model turns out to be too soft, prone to damage, or a thin, sticky layer of incompletely cured resin remains on its surface, the preparation takes control of the situation;
• it also works well when thorough cleaning of the model after printing becomes a challenge, and working with acrylic ceases to be predictable;
• this is an innovative solution created with the real problems of laboratories in mind, which until now did not have one effective way to solve them.

When to use Secret Agent Powder:

• when the 3D resin model turns out to be too soft or prone to damage;
• when a thin, incompletely cured layer of resin remains on the surface;
• when there are difficulties with thorough cleaning of the model after printing;
• when there are problems separating acrylic from 3D resin.

Features:

• eliminates the incompletely polymerized layer;
• the model surface becomes harder and scratch-resistant;
• the oxygen inhibition layer disappears, which enables direct and secure bonding of addition silicones without the need for additional processing;
• the model is fully prepared for further work;
• easy and fast model hardening procedure.

Instructions for use:

• the powder dissolves in warm water (45–55°C), creating an active solution in which the freshly printed and isopropanol-rinsed model is immersed;
• after just 5–10 minutes, the oxygen inhibition layer is completely removed.

Technical data:

• mixing proportions: 4.5 g of powder/100 ml of water;
• curing time: 5-10 min;
• color: white.

Packaging:

• 1 pc.

Stratogel 3D - Insulator for 3D models 100ml

Isolator for 3D models.

Characteristics:

• gel, despite its viscosity, spreads easily on the surface, and after drying creates a thin layer;
• acts as a separating film between 3D resin and acrylic resin;
• has the appropriate viscosity, effective with just one layer;
• however, you can apply a second layer when dealing with rougher surfaces (printed models larger than 100 microns);
• the first layer must be completely dry;
• the plastic layer is easily removed with water and a brush.

STRATOGEL comes off without residue, does not damage acrylic resin and 3D resin, does not change the properties of resins, is safe and does not contain any toxic substances.

Advantages:

• easy application: a single layer is applied with a brush;
• creates a very thin insulating layer;
• does not contaminate 3D resin or acrylics;
• easily removed with water.

How to use:

• apply a few drops directly from the bottle to the dry model and spread evenly with a brush;
• For quick drying, it is recommended to dry the gel with compressed air at low pressure for 30 seconds, air drying for 30 minutes.

Packaging:

• 100ml

Formlabs Soft Tissue Starter Pack Form 3 3D printer resin set

Soft Tissue Starter Pack for Form 3. Starter pack for soft tissues.

Features:

• allows you to create your own Soft Tissue Resin in custom-matched shades of pink (dark, medium, and light);
• allows for 3D printing of flexible gingiva masks, used in combination with rigid dental models;
• thanks to the addition of removable, flexible elements imitating soft tissues to the produced models, you can verify the accuracy of prosthetic restorations on implants with full confidence.

Packaging:

• 1 set

Otoflash G171-6 N2-Connecting kit

Connection and connector for gas cylinder (Nitrogen).

Packaging:

• 1 pc.

Detax Freeprint crown resin 500g

Light-curing, ceramic-filled resin for 3D printing. For the production of permanent crowns, inlays, onlays, veneers, prosthetic teeth, and long-term temporary crowns and bridges. For DLP printers with a wavelength of 385 nm. Does not contain MMA or THF-MA.

Class IIa medical device.

Curing recommendations:

• Recommended lamp: We recommend using the Otoflash G171-6 lamp for curing.
• Medical printing (biocompatible): For medical resins, it is necessary to use a lamp with a nitrogen (N₂) connection.

Note:

• The final color of the finished work may differ slightly from the shade guide – this depends on the model of the printer and curing lamp used.

Colors: - A1, A2, A3, A3,5, B1, B3, C2, D3, BL.

Features:

• very high fracture and abrasion resistance;
• natural translucency and opacity;
• easy to grind and polish;
• high biocompatibility;
• no discoloration due to low water absorption;
• long-term color stability;
• excellent bonding with classic dental cements.

Physical data:

• flexural strength > 115 MPa;
• modulus of elasticity > 2800 MPa;
• final hardness > 50 Barcol;
• water absorption at 40 g/mm3;
• solubility 7.5 g/mm3.

Packaging:

• 1 pc.

Dreve Resin vat for Phrozen Sonic XL4k

Resin bathtub.

Packaging:

• 1 piece.

Dreve FEP foil for Phrozen Sonic XL 4K, Sonic CS+

FEP blank - special FEP foil for Phrozen printers.

Technical specifications:

• material: FEP;
• color: transparent;
• size: 290x210mm.

Packaging:

• 1 pc.

Dreve resin FotoDent biobased model 385nm beige opaq 1kg

Biobased® 385nm model

Biobaset t® model is a light-cured resin consisting of 50% renewable raw materials. The material properties are ideal for the production of models (also the above-mentioned Aligner). The FotoDent® bio-based model can be cleaned using the FotoClean program.

Advantages:

• Less pollution in the atmosphere.
• Free from carcinogenic materials.
• Shorter cleaning times.

Material data:

• Color beige opaque.
• Modulus of elasticity ≥ 2200 MPa.
• Viscosity ~ 0.6 Pa s.
• Bending strength ≥ 95 MPa.

Packaging:

• 1kg bottle.

Formlabs Dental Model V3 Form 3 3D printer resin 1 liter

Model Resin V3 (Form 3). Designed for crown and bridge models with removable dies.

Dental Model Resin is a high-precision resin with high accuracy.

Version 3:

• this version of Model Resin is a reformulation of the previous version;
• thanks to the new V3 resin, you can print even more accurate models in half the time;
• supports print resolutions: 100 and 50 microns;
• requires Form 3 Resin Tank V2.1 or newer for Form 3B and Form 2 Resin Tank LT for Form 2;
• post-curing is required, after printing, the finished parts require additional curing (exposure).

Packaging:

• 1 pc.

Simplex model isolation 80g

SIMPLEX model isolation, Isolator for 3D printed models from resins and filaments.

Renfert catalog number 17350010

Thanks to the ready-to-use agent, you can easily and safely make orthodontic appliances from dental resin on a printed model.

Apply a thin layer of the agent with a brush.

Once dry, this layer creates a clear isolation between the printed model and the dental acrylic.

Advantages:

• adapted for use with models printed from 3D filament and resin;
• intended for isolating models in the production of removable orthodontic appliances;
• also suitable for models made in the SLA/DLP printing process;
• One application is enough to achieve optimal separation of the model from the workpiece;
• the agent can be easily removed with water and does not require steam cleaning;
• does not contain substances harmful to health.

Packaging:

• 1pc/80g

Senertek resin for temporary crowns Temp V5 500g

Senertek TEMP is a high-quality light-cured resin designed for 3D printing of temporary dental restorations such as crowns and bridges.

This material offers a perfect combination of aesthetics, durability and functionality.

Characteristics:

• natural aesthetics: all shades provide a high-quality aesthetic finish that blends harmoniously with the patient's natural teeth;
• strength and stability: provides crack-resistant temporary restorations with high hardness and low shrinkage;
• biocompatibility: safe for intraoral use, does not cause adverse reactions;
• Versatile: ideal for a wide range of temporary dental applications such as crowns, bridges and veneers;
• for use in printers with DLP, SLA, LCD technology;
• visible on X-ray photographs;
• filled with 40% nanoceramics;
• does not change color over time.

Application:

• for temporary removable dental prostheses;
• individual temporary crowns;
• contributions, outlays;
• temporary bridges;
• temporary veneers.

Resin parameters:

• bending strength: 260 MPa;
• water absorption: <20μg/mm³;
• water solubility <1.2μg/mm³;
• hardness: 95 Shore D;
• viscosity : 1900 CPS.

Packaging:

• 500g

VarseoVest C&B Bego for casting 3D printed crown and bridge frameworks 160g

VarseoVest C&B precision high-temperature investment material for casting 3D printed crown and bridge frameworks.

BEGO catalog number 54894

Advantages:

• excellent fit and smooth surfaces of cast objects;
• very good flow properties and long processing time enable easy covering of printed objects;
• significant time savings during the heating process, directly into the furnace heated to 900 °C, time 20 min;
• high strength of the covering mass – the sleeves do not crack or tear despite the expansion of the plastic;
• Clear expansion control using the special BegoSol ® CC mixing fluid ensures reproducible fitting results.

Physical data:

• processing time: approx. 3 min 15 sec;
• flow properties 140 mm;
• linear thermal expansion: 1.3%;
• compressive strength: approx. 5 MPa.

Packaging:

• 1 pc/160g

Dreve Build Platform for Phrozen Sonic XL 4K

Dreve Printing Platform for Phrozen Sonic XL 4K Printer

Characteristics:

• high durability, made of high-quality aluminum resistant to chemicals contained in resins and intensive cleaning in ultrasonic washers;
• for Phrozen Sonic XL 4K 3D printer;
• optimized adhesion, the surface is specially treated to ensure perfect adhesion of the FotoDent series resins, minimizing the risk of the print detaching;

Packaging:

• 1 pc.

BegoSol CC Bego liquid for investment 1000ml The liquid is sensitive to low temperatures - shipping during frost is at the risk of the customer

Begosol CC liquid, compatible with VerseoVest C&B mass.

BEGO catalog number 54907

Packaging:

• 1l

VarseoVest P plus Bego investment for 3D printed skeletal prostheses 300g 1 piece

VarseoVest P plus, designed for embedding 3D-printed skeletal prostheses.

BEGO catalog number 54911

Advantages:

• perfect fit and smooth surfaces of cast objects;
• excellent flow properties and long processing time enable easy shielding;
• significant time savings in the heating process; placed in a preheated oven after 20 minutes at a temperature of 800–950 °C;
• high resistance of the covering mass – the sleeves do not tear or crack despite the expansion of the plastic;
• Varseo Vest P is characterized by less dust formation during processing, which contributes to a significant reduction of harmful quartz and cristobalite dust in the laboratory.
• cures while maintaining edge stability, good release;
• Clear expansion control using the special BegoSol ® K mixing fluid ensures reproducible fitting results.

Physical data:

• preparation time: approx. 4 min 40 sec;
• flow properties: 145 mm;
• linear thermal expansion: 0.9%;
• compression resistance: approx. 8 Mpa.

Packaging:

• 1 pc./300g

Dreve FotoDent denture resin 385 nm pink transparent 1kg

Light-curing resin for the production of denture bases.

The material provides accurate results with exceptional dimensional stability.

The FotoDent® denture is MMA-free and color-stable.

Material data:

• Final hardness 80 Shore D.
• Elastic modulus > 2000 MPa.
• Bending strength > 80 MPa.
• Viscosity 0.4-0.6 Pa·s.
• Transparent pink color.

Packaging:

• 1 kg

Black ziplock bags for storing 3D prints 12x18cm 50 pieces

Black, light-tight zipper bags for storing models and other 3D prints.

• Size 12x18cm.

Packaging:

• 1 pack/50 pcs.

AnyCubic Wash & Cure Machine 3.0 (4L)

The washer is compatible with most LCD 3D printers including Elegoo Mars, Phrozen Sonic, and other printers.

Compared to Wash & Cure 2.0, the curing size has increased by 15% and the capacity of the cleaning basket by as much as 100% (up to 3L).

Advantages:

• large capacity of 3l basket and 4l bucket;
• large cleaning work area in the basket 165 x 100 x 180 mm;
• the cleaning and curing mode is easily accessible on the panel, the knob sets the working time to max. 30 minutes;
• Thanks to the innovative FlexiCure gooseneck lamp, UV light can reach every spot;

Technical data:

• cleaning area in basket: 165 x 100 x 180 mm;
• cleaning area in basket (suspended): 165 x 100 x 165 mm;
• curing area: 160x180 mm;
• device size: 290x270x479 mm;
• gooseneck light: Max. height 285 mm;
• time selection range: 1 - 30 min;
• bucket capacity: 4L;
• basket capacity: 3L;
• UV light wavelength: 405 nm;
• weight: 2.7 kg.

Packaging:

• 1pc

Formlabs Precision Model V1 Form 4 3D printer resin 1 liter

Precision Model Resin Form 4. A high-accuracy material, this next-generation model resin was developed to leverage the new Form 4 ecosystem. It creates beautiful models with crisp edges thanks to its high opacity, beige color, and smooth, matte finish.

Precision Model Resin is the next generation of model resin for the new Form 4 printer series, printing three times faster while offering improved accuracy and aesthetics.

It was developed to achieve the highest possible precision, repeatability, and aesthetics. It is perfect for creating highly accurate dental models (prosthetic, implant) as well as general applications requiring perfect detail reproduction.

Features:

• ultra-high precision: guarantees perfect dimensional fit – over 99% of the printed surface is within 100 μm of the digital CAD design;
• extreme print speed: optimized for LFD technology in Form 4 series printers, the resin prints up to 3 times faster compared to previous versions of model resins (allowing, for example, printing 8 dental models in about 90 minutes);
• plaster-like, matte appearance: the resin has a beige color with high opacity and a smooth, matte finish. This eliminates light reflections and facilitates precise visual assessment of fine edges (e.g., margin lines in dentistry) and enables seamless scanning with laboratory scanners.
• lightning-fast post-processing: finished parts require a short, just 5-minute wash in isopropyl alcohol (IPA) and a 5-minute post-cure in a lamp at room temperature (without turning on the heater).

Applications:

• prosthetic models (crowns, bridges);
• implant models and implant analogs;
• models with complex, removable dies;
• diagnostic models.
• precise engineering prototypes, miniatures, and general-purpose applications requiring sharp edges and smooth surfaces.

Specifications and compatibility:

• color: beige (Beige, Matte);
• supported layer height: 25 and 50 microns;
• compatible printers: Form 4, Form 4B, Form 4L, Form 4BL;
• required tank: Form 4 Resin Tank / Form 4L Resin Tank;
• required platform: Form 4 Build Platform (standard or Flex).

Packaging:

• 1 pc.

Detax resin Freeprint splintmaster taff 1000g

Light-curing, flexible resin for 3D printing.

Characteristics:

• for making flexible splints, repositioners, mouth guards, splints and bite plates;
• biocompatible;
• for DLP printers with a wavelength of 385 nm;
• Class IIa medical device.

Advantages:

• very high wearing comfort;
• no tension;
• long-term durability and stability;
• high impact resistance;
• easy to care for, clean and polish;
• no MMA, THF-MA and TPO;
• neutrality of smell and taste.

Technical specifications:

• tensile strength > 40 MPa;
• elongation > 20%;
• tear strength > 140 N/mm;
• final hardness > 75 Shore D;
• water absorption < 32 µg/mm³;
• solubility < 5 µg/mm³.

Packaging:

• 1 pc.

Detax resin Freeprint splintmaster flex 1000g

Light-curing, highly flexible resin for 3D printing.

Characteristics:

• for making flexible splints, repositioners, mouth guards, splints and bite plates;
• biocompatible;
• for DLP printers with a wavelength of 385 nm;
• Class IIa medical device.

Advantages:

• very high wearing comfort;
• no tension;
• long-term durability and stability;
• high impact resistance;
• easy to care for, clean and polish;
• no MMA, THF-MA and TPO;
• neutrality of smell and taste.

Technical specifications:

• tensile strength > 25 MPa;
• elongation > 50%;
• tear strength > 110 N/mm;
• final hardness > 65 Shore D;
• water absorption < 32 µg/mm³;
• solubility < 5 µg/mm³.

Packaging:

• 1 pc.

Detax resin Freeprint temp 500g

Light-curing, biocompatible resin for printing temporary crowns and bridges.

Advantages:

• light spectrum 385 nm;
• exceptional resistance to cracking and bending;
• high abrasion resistance;
• natural tooth aesthetics, shiny, translucent colors;
• easy surface treatment and polishing, which can be individually characterized using composites;
• low viscosity ensures low material consumption and faster cleaning;
• resistant to oral conditions, no odor or taste irritations;
• Class IIa medical device;
• colors: A1, A2, A3.

Technical specifications:

• bending strength > 100 MPa;
• flexural modulus > 2300 MPa;
• water absorption < 40 µg/mm3;
• solubility < 7.5 µg/mm3;
• hardness > 40 Barkol.

Packaging:

• 1 pc.

Detax resin Freeprint splint 2.0 500g

Light-curing, biocompatible 3D printing resin for the production of implant templates, transfer keys and bite splints.

Characteristics:

• light spectrum 385 nm;
• transparent formula for visual control in the work area;
• process reliability due to high initial hardness and final strength;
• low viscosity ensures low material consumption and faster cleaning;
• highest mechanical resistance to bending and cracking;
• neutral smell and taste;
• medical device class IIa;
• color: transparent.

Technical specifications:

• color/appearance transparent, translucent;
• flexural strength > 80 MPa (DIN EN ISO 20795-2);
• flexural modulus > 2000 MPa (DIN EN ISO 20795-2);
• Shore D hardness > 80–82 Shore D;
• water absorption < 32 µg/mm³ (DIN EN ISO 20795-2);
• solubility < 5 µg/mm³ (DIN EN ISO 20795-2);
• biocompatibility Complies with ISO 10993-1 (class IIa);
• recommended wavelength 385 nm (dental DLP printers).

Packaging:

• 1 pc.

Detax resin Freeprint cast 2.0 500g or 1000g

Light-curing 3D resin for the production of precision casting objects (skeletons).

Advantages:

• for all UV printers with a 385 nm light spectrum;
• excellent dimensional stability after printing ensures safe application with fit control, especially for cast models and molds;
• Printing results are precise and distortion-free, even for extremely delicate and complex models;
• any corrections or repairs after printing are possible using easyform gel LC;
• Viscosity and optimized cure depth help reduce printing time and material consumption and facilitate faster cleanup;
• burns without leaving any residue in the mold and is the basis for high-quality modeling results that ensure a perfect fit;
• color: red.

Packaging:

• 500g or 1000g

Keystone resin KeySplint Soft 1kg

KeySplint Soft resin is fully biocompatible and complies with international regulations and standards for medical devices.

Using unique technologies, Keystone Industries has developed a one-of-a-kind 3D printing resin for the production of flexible dental splints and night guards.

This DLP-optimized resin is a unique printable material that combines the strength needed to protect teeth from disorders like bruxism with added flexibility for greater patient comfort.

KeySplint Soft is also easy for the patient to clean.

Characteristics:

• can be printed on the Mars 5Ultra 9K printer (micran code 8572);
• the solid formula allows for a three-year guaranteed shelf life;
• is color stable and has been proven in many open-source printers.
• no other dental splint resin offers the quality and performance of KeySplint Soft.

Advantages:

• biocompatible;
• transparent;
• easy to polish;
• resistant to discoloration.

Physical data:

• flexural strength 2.6-4.4 MPa (ISO 20795-2);
• Young's modulus 1356 MPa (ASTM D790);
• final hardness 82 Shore D;
• water sorption <18 µg/mm³ (ISO 20795-2).

Packaging:

• 1kg

Formlabs Build Platform Form 4 build platform

Form 4 Build Platform. The build platform features a durable, aluminum surface.

Having a spare platform can significantly speed up your workflow and enable uninterrupted printing – whether you are changing resin or starting a new print process while removing finished parts from the previous platform.

Tip:

• For even faster and easier work, we recommend choosing the flexible Build Platform Flex, which is equipped with quick-release print technology

Packaging:

• 1 pc.

Formlabs Standard V4.1 Form 3 3D printer resin 5 liters

Standard resin for creating anatomical models for training and diagnostic purposes.

Color:

• Clear;
• Grey.

Grey Resin V4.1 is an updated photopolymer resin for SLA 3D printing that combines high accuracy, increased strength, and excellent detail. The Grey V4.1 version provides a richer shade of grey, a uniform matte finish, and consistent printing results. With a capacity of 5 liters, this resin is an ideal choice for large-scale production, engineering prototyping, and mass production of models.

Clear Resin V4.1 is an extremely rigid material created for special tasks, which, after polishing, allows for an almost perfect glass effect (full optical transparency). It was designed for models that work with light or have complex internal structures that you want to showcase.

Features:

• excellent shape reproduction;
• durability;
• excellent surface quality.

Compatibility:

• designed for Formlabs Form 3 and Form 3L printers.

Packaging:

• 1 pc.

Anycubic Eco Print foil for resin tank 2 pieces

Resin tank foil for Anycubic EcoPrint.

• Photon Mono
• M5s
• M5s Pro
• M7
• M7 Pro

Parameters

• size 278 x 190mm;
• thickness 0.3mm;
• permeability 92%;
• type of ACF foil.

Advantages:

• suitable for high-speed printing.

Attention:

• the foil is a consumable part and should be replaced if it becomes deformed or damaged during printing;
• The foil should be replaced immediately if signs of deformation or excessive adhesion appear.

Packaging:

• 2 pcs.

Resin tank for the Anycubic EcoPrint 3D printer

A resin tank designed for Anycubic EcoPrint 3D printers. This is an essential consumable, ensuring precise and repeatable 3D prints.

Application:

• The tank is designed for seamless integration with Anycubic printers, allowing for quick resin changes or replacement of a used cartridge. Thanks to its high-quality construction, the tank guarantees stable printing and long-term operation.

Packaging :

• 1 pc.

Formlabs VarseoSmile TriniQ Resin Form 4B 3D printer resin 750g

Formlabs BEGO™ VarseoSmile® TriniQ® resin is a versatile, ceramic-filled, biocompatible material designed for both temporary and permanent restorations, including single units such as crowns, inlays, onlays, veneers, bridges, and denture teeth.

BEGO™ VarseoSmile TriniQ is the first 3D printing resin designed for permanent bridges, characterized by excellent accuracy, translucency, and an efficient process.

Curing recommendations:

• Recommended lamp: We recommend using the Otoflash G171-6 lamp for curing.
• Medical printing (biocompatible): For medical resins, it is necessary to use a lamp with a nitrogen (N₂) connection.

Note:

• The final color of the finished work may differ slightly from the shade guide – this depends on the model of the printer and curing lamp used.

Available in three VITA shades:

• A2;
• A3;
• B1.

Features:

• wide spectrum: for permanent and temporary restorations and removable denture elements;
• aesthetics: available in three popular VITA shades (A2, A3, B1), allowing for a perfect match to the patient's natural teeth;
• innovation: certified for permanent prosthetic bridges.

Printer compatibility: Form 4B

• compatible with Form 4 resin tank;
• compatible with Form 4 Flex build platform;
• biocompatibility certified.

Material properties

• flexural strength: 120 MPa;
• flexural modulus: 3600 MPa;
• Shore hardness: ≥ 90 D;
• sorption: < 0.6 µg/mm³;
• Solubility: < 12 µg/mm³;

Packaging:

• 1 pc.

Renfert Polish Paste 3D-printed materials diamond paste 13g Promotion

Specialized extraoral polishing paste, designed to give a high gloss to restorations made using 3D printing technology (from resins or filaments).

Renfert catalog number 5104000

Characteristics:

• instant results: quick polishing results thanks to special components precisely adapted to the properties of PMMA and PETG materials;
• time saving: allows you to achieve optimal, mirror shine in a short time;
• patient comfort: perfectly smooth surface ensures high comfort of wearing the restoration and limits the accumulation of dental plaque.

Packaging:

• 1 pc.

V-Print dentbase pink 1000 g

Light-curing resin for printing removable denture plates.

Indications:

• Removable denture plates

Advantages:

• Class IIa medical device

• Comfort of wearing the prosthesis – thanks to precision of workmanship and perfect fit.

• High aesthetics – natural gingival color.

• Compatibility – use with available lining materials.

• Safe removal from build platform.

• Patient acceptance - no taste or smell.

• Biocompatibility.

Packaging:

• 1000g

Ivotion Base Print 3D printing resin for denture plates 1000ml

Aesthetic base material for 3D printed prostheses, enabling efficient production of prostheses in proven PMMA quality.

Ivotion Base Print is the first 3D printing material for permanent applications from Ivoclar (material quality meets the requirements of the EN ISO 20795-1 standard.)

Drawing on Ivoclar's extensive experience in materials, Ivotion Base Print provides high-quality, durable and aesthetic denture bases with exceptional wearing comfort and high accuracy of fit.

Characteristics:

• Ivotion Base Print is available in three shades, allowing you to create individual dentures with a natural look;
• the material is characterized by a low tendency to plaque formation and discoloration.
• Ivotion Base Print can be used in the PrograPrint system and other approved printing systems within the approved process: Ivoclar: PrograPrint PR5, Asiga: Max, Max 2, MAX X, Ultra, Pro 4K, Pro 4K XL.

Packaging:

• 1000ml

EcoPrint HeatMixer resin mixer with heater NEW

HeatMixer, resin mixer and heater in one.

The HeatMixer is a specialized device designed for heating and mixing photopolymer resins used in 3D printing. It helps achieve optimal resin properties, which directly translates into improved print quality.

The device solves the most common resin problems:

• too low temperature: if the room temperature is below 15°C, HeatMixer will heat the resin to the optimal range of 20-30°C, making it more active;
• high viscosity: heating the resin reduces its viscosity, making it easier to print;
• delamination: the device effectively mixes resins that have been standing unused for a long time;
• color errors: prevents chromatic aberrations by thoroughly mixing pigments;
• Creating mixtures: allows you to easily combine different colors or types of resins.

Key Features and Operation:

• two operating modes: low or fast mode, depending on your needs;
• temperature settings: the device offers three levels: no heating, 40°C and 50°C;
• intelligent control: HeatMixer automatically changes the direction of rotation every 2 minutes and turns off after 3 hours of inactivity;
• intuitive panel: equipped with a screen displaying mode and temperature icons and touch buttons.

Technical specifications:

• product dimensions: 270 x 125 x 180 mm;
• weight: 1325 g;
• supported bottles: 250g / 500g / 1000g;
• heater power: 48 W;
• power supply: AC 100-240V, 50/60 Hz.

Packaging:

• 1 pc.

Formlabs Form 4 Finish Kit

Quickly and easily finish your prints with the versatile Form 4 Finish Kit, which will ensure cleanliness and order in your workspace.

Includes two rinse buckets, a rinse basket, a resin removal tool, a tank scraper, a build platform tool, flush cutters, a squeeze bottle, and disposable nitrile gloves.

Package:

• 1 kit

AnyCubic Wash & Cure 3 Plus (7.6L)

Device with a large capacity of 7.6 L.

It allows you to wash your prints in two ways - using a basket or in hanging mode, without removing them from the build platform.

Advanced features such as adjustable UV lighting time and intensity ensure efficient and even light distribution on the print.

Advantages:

• large capacity 7.6l;
• maximum working area is 228x128x300 mm;
• Thanks to the innovative FlexiCure gooseneck lamp, UV light can reach every spot;
• The touch screen makes it easy to control the print washing and curing processes.

Technical data:

• washing function working area (in the basket): 228 x 128 x 260 mm;
• washing function working area (with platform): 228 x 128 x 250 mm;
• curing function working area: 220 x 260 mm;
• UV light source: 14 lenses 405 nm + Flexicure lamp;
• print washing and drying time: 1 to 30 minutes;
• rated power: 36 W;
• device dimensions: 312 x 267 x 434 mm;
• weight: 5.7 kg.

Packaging:

• 1pc

V-Print Try-In beige 1000 g

Light-curing resin for the production of trial prosthetic restorations.

Indications:

• Trial full and partial dentures.

• Transfer and sanding templates.

• Corrective and occlusal impressions.

Advantages:

• Initial check-up before making the final prosthesis – checking and, if necessary, adjusting and correcting occlusion, function, pronunciation and aesthetics.

Packaging:

• 1000g

Formlabs Form Wash V2 post-print cleaning device

Form Wash automatically, thoroughly, and effectively cleans printed parts using IPA (isopropyl alcohol) or alternative solvents.

Features:

• prints can be transferred directly on the build platform from the printer to Form Wash or removed and placed in the wash basket;
• prints are precisely and thoroughly agitated in the solvent by an impeller, ensuring every corner and crevice is perfectly clean;
• after the wash cycle, Form Wash automatically lifts parts out of the solvent, allowing them to air dry. This prevents over-soaking (waterlogging) of models, which could lead to deformation.

Key parameters and performance:

• 10 minutes: default wash time when using fresh isopropyl alcohol (IPA);
• 7 - 15 liters: flexible solvent volume allowing for washing parts of various sizes;
• 120 models: Number of prints per IPA refill with regular use. Wash 67% more parts before replacing the solvent compared to the previous generation.

Packaging:

• 1 pc.

Formlabs Form 4B 3D Printer 2026 Edition Open Material Mode Included!

Formlabs printers purchased after January 19, 2026 are equipped with Open Material Mode as standard (open system, ability to print on any resins).

The Form 4B 3D printer is another offering from Formlabs. Never before has the dental and medical industries had access to such a combination of quality, speed, and user experience in a desktop printer.

Formlabs Form 4B with new LFD™ technology

The Form 4B printer features the newly patented Low Force Display™ technology. It features six advanced print control systems, a new resin tank and dispensing system, and a larger build plate than previous models. The new build plate dimensions are 200 x 125 x 210 mm, which is 30% larger than before.

Printing speeds of up to 100 mm/h deliver finished models in less than 2 hours. A 50-micron pixel size is used for maximum dimensional accuracy.

The Form 4 3D printer is a solution designed for the dental and medical industries. The Form 4B supports all materials available for engineering Form 4 printing, plus dental, medical, and biocompatible resins. A wide selection of materials will find use in the daily work of dental technicians, dentists, and medical research laboratories. The combination of the speed of new LFD technology, high-quality print surfaces, and specialized materials expands the possibilities for digital medicine and dentistry. From medical scan to print in 2 hours? - now possible with the new Form 4B printer.

The most important benefits of the new Form 4B series compared to previous models:

• New 3D printing technology – Low Force Display™
• Save time – print parts up to 5 times faster.
• Cheaper operation – lower resin tank costs with extended service life and 27% lower cost of basic materials
• Larger work area – 30% larger work platform with dimensions of 20×12.5×21cm.
• Greater dimensional accuracy – new optical engine.

Technical specifications:

• Technology: Low Force Display™ (LFD)
• Working area: 20.0 × 12.5 × 21.0 cm
• Layer thickness: 25 – 300 microns
• XY resolution: 50 microns
• Average printing speed: 40 mm/h
• Maximum printing speed: 100 mm/h
• Resin Tank Life: 75,000+ layers with any Formlabs material
• Printer weight: 18.3 kg
• Printer dimensions: 39.8 x 36.7 x 55.4 cm
• Warranty and service: one-year warranty included
• Paid service and extended warranty options: available
• Accepted file types: STL, OBJ, 3MF

The printer comes with a 1-year warranty as standard, but you can also purchase a DSP (Dental Service Plan) package that extends the warranty to 3 or 5 years.

Other benefits of Dental Service Plan:

Priority Technical Support: Access to Formlabs' dedicated support team, specialized in dental applications. Requests are handled faster than with a standard warranty, which is crucial for clinical or laboratory work.

DSP's extended warranty extends your printer's standard warranty for the full duration of the plan. This protects against unexpected repair costs and provides greater cost stability.

Quick device replacement (advance replacement/hot swap). In the event of a failure, Formlabs ships a replacement device before the damaged printer is returned. This minimizes downtime and allows for continuous operation in the practice or laboratory.

Dedicated support for dental workflows Support covers not only the printer itself, but also software, materials certified for dental applications, and the correct configuration of printing and post-processing processes.

Training and Educational Materials Access training, documentation and videos to help you implement your printer more quickly and achieve consistent, high-quality prints.

Proactive diagnostics and consulting Regular check-ins and support in identifying potential problems before they impact print quality or device availability.

Greater operational safety In the dental environment, where printers are used for items that directly impact patient treatment, DSP increases reliability and predictability.

Packaging:

• 1x printer
• 1x Resin Tank form 4B
• 1x 4B mold build platform
• 1x Mixer form 4B
• 1x Finish kit

SG Surgical Guide Next Dent resin orange 1kg

NextDent SG Surgical Guide is a biocompatible class I material developed for printing surgical guides.

Due to their high accuracy, they facilitate insertion of the sleeve immediately after printing.

This allows for even greater precision during surgery.

NextDent SG material is resistant to disinfectants.

The material can also be sterilized using gamma radiation and autoclave.

The use of an autoclave does not affect the dimensional stability of the material.

Technical data:

• material strength ≥ 85 MPa;
• tensile strength ≥ 2118 MPa
• residual monomer < 0.1;
• biocompatible, non-toxic;
• orange color.

Packaging:

• 1kg

Formlabs Form 4 Mixer - resin mixer

The Form 4 Resin Mixer improves material efficiency by maintaining resin homogeneity in the tank during the printing process.

A mixer is required for every print.

For convenience, we recommend having one resin mixer per tank.

Packaging:

• 1 pc.

Formlabs Solvent Pump for Form Wash V2

Solvent Pump is a battery-powered pump that quickly fills and drains the Form Wash cleaning container.

Solvent Pump eliminates the risk of chemical spills and simplifies the workflow.

Package:

• 1 pc.

VarseoSmile TriniQ żywica 3D 250g

Żywica VarseoSmile TriniQ wyróżnia się innowacyjnym składem, a dzięki wysokiej stabilności materiału, umożliwia wydruk nie tylko stałych mostów, ale także rozległych uzupełnień tymczasowych.

Doskonałe właściwości polerowania i wyjątkowa przezierność gwarantują najwyższą estetykę.

Zalecenia dotyczące utwardzania:

• Rekomendowana lampa: Do utwardzania zalecamy użycie lampy Otoflash G171-6.
• Drukowanie medyczne (biokompatybilne): W przypadku żywic medycznych niezbędne jest użycie lampy z przyłączem azotu (N₂).

Uwaga:

• Ostateczny kolor gotowej pracy może delikatnie różnić się od kolornika – zależy to od modelu użytej drukarki oraz lampy utwardzającej.

Zalety:

• wysoka siła wiązania z konwencjonalnymi cementami adhezyjnymi zapewnia niezawodne osadzanie w ustach pacjenta i długi czas stosowania uzupełnień;
• wydajny proces drukowania 3D umożliwia szybkie i produktywne wytwarzanie uzupełnień, skracając czas leczenia i umożliwiając skuteczne leczenie większej liczby pacjentów;
• wyjątkowa stabilność materiału umożliwia tworzenie trwałych i wysoko estetycznych uzupełnień. Daje możliwość druku koron i mostów tymczasowych oraz ostatecznych;
• doskonałe właściwości polerowania oraz przezierność, umożliwiają tworzenie uzupełnień, które płynnie wtapiają się w naturalne uzębienie;
• żywica wykazuje stopień ścieralność podobny do dwukrzemianu litu, a także jest przyjazna dla zębów przeciwstawnych;
• jest nie tylko trwała, ale także optymalnie integruje się z naturalną strukturą zęba;
• łatwość odbudowy i naprawy przy użyciu konwencjonalnych kompozytów zwiększa długoterminową stabilność uzupełnienia i optymalizuje elastyczność leczenia;
• doskonała stabilność koloru zapewnia trwałe efekty estetyczne;
• dzięki wyjątkowej biokompatybilności i współczynnikowi konwersji podwójnego wiązania wynoszącemu prawie 100% przewyższa większość materiałów kompozytowych.

Dane Techniczne:

• kolory wg kolornika Vita;
• lepkość 1900-6000 mPa*s;
• wytrzymałość na zginanie 120 MPa;
• absorbcja wody 12,00 µm/mm³;
• rozpuszczalność w wodzie 0,06 µm/mm³;
• twardość powierzchniowa; 90 Shore D;
• długość fali utwardzania 385 – 405 nm.

Opakowanie:

• 250g

Formlabs Resin Pump for Form 3

Formlabs resin pump.

The resin pumping system for Form 3 series stereolithography (SLA) 3D printers smoothly delivers resin from a 5L resin cartridge directly into the printer's tank.

Reduce waste by 86%.

Package:

• 1 pc.

AnyCubic screen protector for Photo Mono X 6K 5 pieces

Ensure the longevity of your 3D printer with a dedicated screen protector. The AnyCubic screen protector for the Photo Mono X 6K is an essential piece of equipment that effectively protects the LCD display against accidental resin spills and mechanical damage.

Characteristics:

• Using a cover helps avoid costly repairs and downtime. It prevents scratches, cracks, or other permanent damage to the screen surface that could negatively impact print quality.
• The product is designed to ensure high light transmission. This allows the resin to cure smoothly, ensuring the full precision and accuracy of your 3D models.

Packaging :

• 5 pcs.

Formlabs Resin Tank Form 4

Low Force Display™ (LFD) 3D printing technology uses a flexible, yet durable, dual-layer film in the tank, ensuring consistent, high-quality prints. Each resin tank comes with a reusable lid, making it easy to stack tanks and store resin outside the printer. With a separate tank for each color or type of resin, changing materials is as simple as sliding in a new tank.

Resin tanks provide consistent performance for at least 75,000 print layers.

Note:

• Form 4 Resin Tanks do not come with a mixer. Mixers must be purchased separately.

Packaging:

• 1 pc.

Resin tray 20x25x10cm

Resin tray 20x25x10cm

Packaging:

• 1 piece

Resin strainer

Convenient strainer for draining the remaining resin after printing.

Packaging:

• 1 piece.

Thermometer Hygrometer LCD

Thermometer and humidity sensor.

Thanks to this device, it is possible to measure the environmental conditions in which e.g. resin for 3D printers and many other materials sensitive to humidity and temperature are stored and used.

Technical data:

• Product type: Temperature and humidity sensor.
• Connectivity: Bluetooth 4.2 LE.
• Power: CR2032 battery.
• Rated voltage: 2.5V - 3V.
• Humidity range: 0%~99%RH.
• Temperature range: 0ºC ~ 60ºC.
• Material: ABS, PMMA.
• Certifications: QB/WSDJ 2401-2019.
• White color.
• Dimensions: 43x43x12.5mm.
• Additional information: Temperature display every 0.1ºC, Humidity display every 1% RH

Packaging:

• 1 piece

ECOSonic ultrasonic cleaner 0.8L

''Eco'' product line - excellent quality at a reasonable price

ECOSonic ultrasonic cleaner.

Fast and effective cleaning, user-friendly.

Perfect for cleaning small and medium-sized objects.

Technical data:

• device size 168×100×130mm;
• tank size 150×85×65mm;
• ultrasonic power 35W;
• timer 0 ~ 30 min adjustable, 18 cycles;
• frequency 40 kHz;
• tank capacity 800ml;
• net weight 0.9kg;
• warranty 1 year;
• CE, FCC certificate.

Packaging:

• 1 pc. (washer, basket, lid)