Bego grinding discs 34x3mm 1 piece

Grinding discs, perfect for grinding off casting channel residues after they have been cut off.

Catalog number BEGO 43080

Features:

• disc diameter 34x3mm;
• recommended rotational speed 10,000 rpm;
• for use on a handpiece mandrel.

Packaging:

• 1 pc.

Keystone reinforced disc 100mm for polisher

Reinforced disc for polisher.

Features:

• disc diameter 100mm;
• internal hole diameter 6mm, for use on a polisher.

Packaging:

• 1 pc.

Keystone reinforced disc 64mm

Reinforced disc for polishing machine.

Features:

• disc diameter 64mm;
• inner hole diameter 6mm, for use on a polishing machine.

Packaging:

• 1 pc.

Carborundum separating discs CR - CO 37x1.0mm

Carborundum separating discs for cutting off casting channels.

Features:

• diameter 37mm x 1mm;
• for mounting on a handpiece mandrel.

Packaging:

• 1 pc.

Porcelain separators 22x0.3 mm

Carbon separators (discs) for porcelain processing.

Features:

• diameter 22x0.3 mm;
• for mounting on a handpiece mandrel.

Packaging:

• 1 pc.

Disc for EWA 98C trimmer

Disc for "Ewa" trimmer

Carborundum disc for trimming and grinding plaster models.

Features:

• disc diameter and thickness: 250x6x20-98C24 NBF or 250x7x20-98C20 MBF;
• hole diameter: 20mm;
• max. rotation speed: 3,850 rpm.

Packaging:

• 1 pc.

Metal discs 25x0.6 mm

Carborundum discs for cutting Cr-Co.

Characteristics:

• diameter 25x06mm;
• on the rectum.

Packaging:

• 1 pc.

Bego grinding discs 22x3mm 1 piece

Grinding discs.

Catalog number BEGO 43100

Characteristics:

• very durable;
• for grinding after cutting off casting channels;
• disc diameter 22x3mm.

Packaging:

• 1 pc.

Renfert reinforced disc 40x1.0mm 1 piece or 25 pieces

Renfert reinforced disc, reinforced with glass fibre.

• Particularly high cutting performance with extreme break resistance.

Renfert catalog number: 581040

Characteristics:

• high quality and resistant shields;
• high cutting performance with maximum protection against breakage;
• for cutting and separating metal alloys;
• operation in the range up to 25,000 rpm;
• diameter 40x1.0mm.

Packaging:

• 1pc. or 25pcs.

DFS Sidia Micro Diamond Disc ⌀ 8mm

Diamond disc (full diamond) for contouring CoCr alloys.

DFS catalog number 50144.

Characteristics:

• diameter: 8mm;
• thickness: 0.40mm;
• fill: fine, red stripe;
• revolutions: from 5' to 15000 rpm
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

BUTTERFLY large reinforced shield 125/1.0 BF

Reinforced disc for polishing-grinding machine.

Characteristics:

• reinforced on both sides with fiberglass mesh;
• for cutting casting channels;
• diameter 125x1.0mm.

Packaging:

• 1pc.

BUTTERFLY reinforced shield, diameter 40mm

Shields reinforced with a handle.

Advantages:

• reinforced on both sides with high-performance and durable fiberglass mesh;
• for cutting steel and precious alloys;
• does not cause heating of the processed material;
• maximum speed 38,000 rpm.

Characteristics:

• white color, thickness 40x0.4mm;
• yellow color thickness 40x05 mm;
• green color thickness 40x0.7 mm;
• blue color thickness 40x1.0 mm;
• red color, thickness 40x1.0 mm with reinforcement.

Packaging:

• 1 pc.

Discs 38x0.6mm

Carborundum discs.

Characteristics:

• size 38x0.6mm;
• brown color.

Packaging:

• 1pc.

Klettfix cutting disc MT3/MT3pro/MT Plus

The Klettfix system is a cost-effective solution for wet trimming and provides high cutting performance.

Renfert catalog number 18031100- grit 80, 18031200- grit 120

Advantages:

• MT Plus/ MT 3/ MT3 pro cutting disc;
• grit 80 (coarse) or 120 (fine);
• diameter 23.4 cm.

Packaging:

• 1 pc.

Corundum discs 38x1.0mm

Corundum discs for cutting casting channels.

Characteristics:

• diameter 38 mm;
• thickness 1.0mm.

Packaging:

• 1pc.

Coarse grinding wheel 80x10mm

Ceramic grinding disc 80/10 mm for mounting on a stationary grinder.

Application:

• for rough grinding of precious metal alloys, chrome, cobalt, stainless steel and other non-precious alloys;
• max speed 2800 rpm

Packaging:

• 1 pc.

Separator with diamond embankment 20/03 BF

Ultra-thin reinforced separator with diamond coating.

Advantages:

• very flexible, high performance and durability;
• double reinforcement with very thin fiberglass mesh.

Application:

• for cutting and processing porcelain and zirconium;

Maximum speed:

• 50,000 rpm;
• diameter 20/0.3mm.

Packaging:

• 1 pc.

Butterfly ultra-thin grinding wheel 22/0.2 + BF

Ultra-thin grinding wheel for steel and alloys.

Characteristics:

• very flexible, reinforced on both sides with fiberglass mesh, high performance and durability;
• for cutting steel, precious alloys and plastics;
• does not cause heating of the processed material or excessive load on power tools;
• max. speed: 50,000 rpm;
• diameter 22x02mm.

Packaging:

• 1 pc.

ECO-Disk reinforced discs 38x1.0mm

Reinforced discs 38x1.0mm.

Color may vary from that shown in the photo.

Packaging:

• 1 pc.

DFS SIDIA Macro Diamond Separator ⌀ 22mm

Diamond disc (full diamond) for contouring CoCr alloys.

DFS catalog number 58154.

Characteristics:

• material: full diamond;
• diameter: 22 mm;
• thickness: 0.35mm;
• grit: medium, grit on the entire surface of the disc (marked with a blue ring);
• revolutions: from 5' to 15000 rpm
• assembly: the discs are factory-mounted on the holder and centered, which ensures stable operation without run-out.

Packaging:

• 1 pc.

Butterfly reinforced grinding wheel with diamond coating 20/0.2 BF

Ultra-thin reinforced separator with diamond coating.

Characteristics:

• very flexible, high performance and durability;
• double reinforcement with very thin fiberglass mesh;
• maximum speed 50,000 rpm;
• diameter 20/0.2mm.

Application:

• for cutting and processing porcelain and zirconium.

Packaging:

• 1 pc.

Butterfly grinding wheel reinforced ultra thin 26/02+ BF

Ultra-thin grinding wheel for steel and alloys.

Characteristics:

• very flexible, reinforced on both sides with fiberglass mesh, high performance and durability;
• for cutting steel, precious alloys and plastics;
• does not cause heating of the processed material or excessive load on power tools;
• max. speed: 50,000 rpm;
• diameter 26x02mm

Packaging:

• 1 pc.

Butterfly grinding wheel reinforced ultra thin 22/0.3

Ultra-thin grinding wheel for steel and alloys.

Characteristics:

• very flexible, reinforced on both sides with fiberglass mesh, high performance and durability;
• for cutting steel, precious alloys and plastics;
• does not cause heating of the processed material or excessive load on power tools;
• max. speed: 50,000 rpm;
• diameter 22x0.3mm.

Packaging:

• 1 pc.

Butterfly ultra-thin grinding wheel 22/0.2 BF

Ultra-thin grinding wheel for steel and alloys.

Characteristics:

• very flexible, reinforced on both sides with fiberglass mesh, high performance and durability;
• for cutting steel, precious alloys and plastics;
• does not cause heating of the processed material or excessive load on power tools;
• max. speed: 50,000 rpm;
• diameter 22x0.2mm.

Packaging:

• 1 pc.

DFS Shield Sidia Micro 16mm

Diamond disc (full diamond) for contouring CoCr alloys.

Characteristics:

• operating range 5-15000 rpm;
• diameter 16 mm;
• thickness 0.25mm;
• mounted and centered.

Packaging:

• 1pc.

Carborundum disc for OMEC cutter

Carborundum disc for OMEC cutter.

• The shield can be used on both sides.

Packaging:

• 1pc.

Dynex discs 40x0.5mm 1 piece

Flexible and durable, double glass fibre reinforced cutting discs for precious and non-precious metals and dental alloys.

Renfert catalog number 570540

Application:

• ideal for cutting sprues and grinding large surfaces of restorations made of base metals and modeling alloys;
• for cutting casting rings with pressed ceramics;
• maximum speed 38000 rpm.

Advantages:

• effective separation and precise processing;
• safe processing thanks to the highest cutting efficiency;
• gentle on the material thanks to extremely low thermal conductivity.

Packaging:

• 1 pc.

Butterfly ultra-thin grinding wheel 20/0.15BF

Ultra-thin diamond separators for cutting zirconium and porcelain.

Characteristics:

• for making very thin incisions and interdental separations;
• reinforced in the middle with fiberglass mesh;
• they do not cause heating of the processed material;
• outer diameter in mm: 20 (± 0.5);
• thickness in mm: 0.15 (± 0.02);
• maximum speed RPM 1/min: 25,000.

Packaging:

• 1pc

Dynex discs 26x0.3mm 1 piece

Flexible and durable, double glass fibre reinforced cutting discs for precious and non-precious metals and model alloys.

Renfert catalog number 570326

Application:

• suitable for cutting and grinding thick canals (< 5 mm) and small areas of restorations made of precious and non-precious metal alloys;
• maximum speed 38000 rpm.

Advantages:

• effective separation and precise processing;
• safe processing thanks to the highest cutting efficiency;
• gentle on the material thanks to extremely low thermal conductivity.

Packaging:

• 1 pc.

Grinding discs 35x3mm 1 piece

Grinding discs.

Renfert catalog number 6152000

Characteristics:

• high quality and resistant shields;
• for cutting and separating chrome-cobalt castings;
• operation in the range up to 25,000 rpm;
• diameter 35mm;
• thickness 3mm.

Packaging:

1pc.

DFS Shield Sidia Micro 22mm

Diamond disc (full diamond) for contouring CoCr alloys.

Characteristics:

• operating range 5-15000 rpm;
• diameter 22 mm;
• thickness 0.30mm;
• mounted and centered.

Packaging:

• 1pc.

Dynex discs 40x0.4mm 1 piece

Flexible and durable, double glass fibre reinforced cutting discs for precious and non-precious metals and model alloys.

Renfert catalog number 570440

Application:

• ideal for cutting sprues and grinding large surfaces of restorations made of base metals and dental alloys;
• maximum speed 38000 rpm.

Advantages:

• effective separation and precise processing;
• safe processing thanks to the highest cutting efficiency;
• gentle on the material thanks to extremely low thermal conductivity.

Packaging:

• 1 pc.

Dynex discs 40x0.7mm 1 piece

Flexible and durable, double glass fibre reinforced cutting discs for precious and non-precious metals and model alloys.

Renfert catalog number 570740

Application:

• ideal for cutting sprues and grinding large surfaces of restorations made of base metals and dental alloys;
• for cutting casting rings with pressed ceramics;
• maximum speed 38000 rpm.

Advantages:

• effective separation and precise processing;
• safe processing thanks to the highest cutting efficiency;
• gentle on the material thanks to extremely low thermal conductivity.

Packaging:

• 1 pc.

Dynex discs 40x1.0mm 1 piece

Flexible and durable, double glass fibre reinforced cutting discs for precious and non-precious metals and model alloys.

Renfert catalog number 571040

Application:

• ideal for cutting sprues and grinding large surfaces of restorations made of base metals and dental alloys;
• for cutting casting rings with pressed ceramics;
• maximum speed 38000 rpm.

Advantages:

• effective separation and precise processing;
• safe processing thanks to the highest cutting efficiency;
• gentle on the material thanks to extremely low thermal conductivity.

Packaging:

• 1 pc.

DFS Shield Sidia Micro 19mm

Diamond disc (full diamond) for contouring CoCr alloys.

Characteristics:

• operating range 5000-15000 rpm;
• diameter 19 mm;
• thickness 0.30mm;
• mounted and centered.

Packaging:

• 1pc.