Plaster disc with diamond edge.

Description:

• Use in the range from 3 to 5000 rpm.
• Hole diameter: 16 mm.
• Outer diameter: 85 mm
• Disc thickness: 0.3 mm.

Packaging:

• 1 piece

Set of 9 contra-angle rubbers for the dentist processing of ceramics.

Package:

• set of 9 pieces

High-quality ceramic stones for the final grinding of zirconium oxide and all types of ceramics, including pressed. The full concentration of diamond and the use of a modern binder allows for very effective grinding without generating high temperature during processing, which protects the structure of the material being processed against damage. The use of the most modern manufacturing techniques allows for very efficient work.

Technical data:

• Recommended speed 15,000-20,000 rpm.
• Diameter 6 mm
• Height 13 mm
• Speed 50,000 rpm.

Package: 1 pc

Diamond disc (full diamond) for contouring CoCr alloys.

Characteristics:

• Operating range 5000-15000 rpm.
• Diameter 19 mm
• Thickness 0.30mm
• Mounted and centered.

Packaging:

• 1 piece

Diamond impregnated grinding system

Description:

• A special stone for the reduction of porcelain, lithium and zirconium disilicate.
• It is particularly suitable for veneers and for the preparation of the crown margins.
• It allows for precise reduction of veneers and crown edges without the risk of chipping.
• Effective material reduction while obtaining a pre-polished surface.
• Low wear thanks to the hard bond.
• Reduced heat conduction.

Technical data:

• 22x2mm
• optimal working range 10,000 - 15,000 rpm, max 20,000 rpm

Package:

• 1 piece

Diamond impregnated grinding system

Description:

• A special stone for the reduction of porcelain, lithium and zirconium disilicate.
• It is particularly suitable for veneers and for the preparation of the crown margins.
• It allows for precise reduction of veneers and crown edges without the risk of chipping.
• Effective material reduction while obtaining a pre-polished surface.
• Low wear thanks to the hard bond.
• Reduced heat conduction.

Technical data:

• 26x2.5mm
• optimal working range 10,000 - 15,000 rpm, max 20,000 rpm

Package:

• 1 piece

Diamond impregnated grinding system

Description:

• A special stone for the reduction of porcelain, lithium and zirconium disilicate.
• It is particularly suitable for veneers and for the preparation of the crown margins.
• It allows for precise reduction of veneers and crown edges without the risk of chipping.
• Effective material reduction while obtaining a pre-polished surface.
• Low wear thanks to the hard bond.
• Reduced heat conduction.

Technical data:

• 17x3mm
• optimal working range 10,000 - 15,000 rpm, max 20,000 rpm

Package:

• 1 piece

Diamond impregnated grinding system

Description:

• A special stone for the reduction of porcelain, lithium and zirconium disilicate.
• It is particularly suitable for veneers and for the preparation of the crown margins.
• It allows for precise reduction of veneers and crown edges without the risk of chipping.
• Effective material reduction while obtaining a pre-polished surface.
• Low wear thanks to the hard bond.
• Reduced heat conduction.

Technical data:

• 4x10mm
• optimal working range 10,000 - 15,000 rpm, max 20,000 rpm

Package:

• 1 piece

Diacera diamond coated erasers for polishing and polishing works made of Zirconium Oxide.

Advice:

• For preliminary grinding, we recommend DIASYNT PLUS stones, for preliminary polishing of the DIACERA medium (green)

Characteristics:

• Beige (fine) color high gloss polishing.
• Speed 7.000- 12.000 rpm, max.20.000 rpm
• Size 17x1.6mm

Package:

• 1 piece

Diacera diamond coated erasers for polishing and polishing works made of Zirconium Oxide.

Advice:

• We recommend DIASYNT PLUS stones for initial grinding

Characteristics:

• Green (medium) pre-polishing.
• Speed 7.000- 12.000 rpm, max.20.000 rpm
• Size 17x1.6mm

Package:

• 1 piece

Cutters for processing acrylic materials with cross cuts.

The 4shine cutters series is a series of cutters made of fine-grained sintered carbide with high hardness, specially adapted to the needs of dental technicians. Each cutter was made using the most modern Swiss CNC milling machines. Rigorous, ultra-accurate testing guarantees high concentricity and cutting efficiency.

Packaging:

• 1 piece

• Milling cutters for processing dry plaster (cutter with a green stripe) and wet plaster (cutter with a black stripe) with thick and very thick cross cuts.

• The 4shine cutters series is a series of cutters made of fine-grained sintered carbide with high hardness, specially adapted to the needs of dental technicians. Shapes, sizes and types of cuts selected together with professionals from around the world. Each cutter was made using the most modern Swiss CNC milling machines. Rigorous, ultra-accurate testing guarantees high concentricity and cutting efficiency.

Packaging:

• 1 piece

• Milling cutters with cross-cuts for processing thermoplastic materials.

• The 4shine cutters series is a series of cutters made of fine-grained sintered carbide with high hardness, tailored specifically to the needs of dental technicians. Shapes, sizes and types of cuts selected together with professionals from around the world. Each cutter was made using the most modern Swiss CNC milling machines. Rigorous, ultra-accurate testing guarantees high rotational accuracy and cutting efficiency.

Packaging:

• 1 piece

Sintered carbide cutters with very fine cross cuts (yellow stripe). Made in the EU.

Application:

• For the final processing of ceramics, gold and precious metal alloys.

Packaging:

• 1 piece

Sintered carbide cutters with small cross cuts (red stripe). Made in the EU.

Application:

• For the final processing of precious metal alloys, chromium-nickel alloy, steel and acrylic.
• For roughing ceramics, shaping and contouring.

Packaging:

• 1 piece

Carbide cutters with standard cross cuts (blue stripe). Made in the EU.

Application:

• For the rapid development of chromium-nickel, chromium-cobalt and other types of alloys.

Packaging:

• 1 piece

Carbide drill bit for quickly and cleanly separating, cutting or finishing all hard thermoforming materials, plaster and other materials.

• Length of the working part 11 mm.
• Max speed 20,000 rpm.

Packaging:

• 1 piece

Sintered carbide cutters with thick cross cuts (green stripe). Made in the EU.

Application:

• For processing plaster and acrylic.
• For rapid processing of plastics.

Packaging:

• 1 piece

Carbide cutters with fine spiral cuts (White stripe). Made in the EU.

Application:

• For the development of precious metal alloys, metal ceramics and titanium.

Packaging:

• 1 piece

Sintered carbide cutters with cross-transverse cuts (purple stripe). Made in the EU.

Application:

• For the development of chromium-cobalt and chromium-nickel alloys.

Packaging:

• 1 piece

Carbide cutters with straight cuts and additional cross cut. Made in the EU.

Application:

• For silicone development.
• For precise processing of edges and surfaces.

Packaging:

• 1 piece

Carbide cutters with thick straight cuts and an additional transverse cut (black stripe). Made in the EU.

Application:

• For processing soft materials - acrylic, resin, silicone (soft denture relining).

Packaging:

• 1 piece

Carbide cutters with fine straight cuts (red stripe). Made in the EU.

Application:

• For final processing and gentle removal of gold, other metals and acrylic.

Packaging:

• 1 piece

Carbide cutters with standard straight cuts (blue stripe). Made in the EU.

Application:

• For the rapid development of chromium-cobalt, chromium-nickel, and other types of alloys.

Packaging:

• 1 piece

Carbide cutters with thick straight cuts (green stripe). Made in the EU.

Application:

• For quick and efficient processing of acrylic and plaster.

Packaging:

• 1 piece

Carbide cutters with very thick straight cuts (black stripe). Made in the EU.

Application:

• For rough processing of plaster and acrylic.

Packaging:

• 1 piece