Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 °C. As the outer layer wears away, more sharp diamond particles emerge.

Characteristics:

• Macro Diamond - 15,000 - 30,000 rpm.
• Application - chrome-cobalt, palladium, porcelain.

Packaging:

• 1 piece.

Polishing silicone eraser. Intended for the preparation and processing of acrylic dentures.

Characteristics:

• Green erasers: rough machining, coarse-grained.
• Gray erasers: polishing, medium grain.
• Yellow erasers: final polishing, fine-grained.

Packaging:

• 1 piece.

Pencil erasers, EVEFLEX pins.

Characteristics:

• The diameter of the eraser is 2x22mm.
• Speed 7,000- 15,000 rpm. max 25,000 rpm.
• Mounted on a special holder (handle mikran code 1527).

Brown color :

• coarse, very hard

Blue color:

• coarse hard

Grey colour:

• medium grain, soft

Red colour:

• fine-grained soft

Green color:

• very fine-grained, soft.

Packaging:

• 1 piece.

New Cutters for CHROM-COBALT and CHROM-NICKEL alloys.

Advantages:

• For rough grinding.
• The surfaces of the cutters are equipped with additional cutting edges.
• More efficient and faster grinding.
• Increased durability.
• Max speed 20,000 rpm.

Packaging:

• 1 piece.

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at a temperature of 700 °C. As the outer layer wears away, more sharp diamond particles emerge.

Characteristics:

• Diamond Milli- Micron 15,000 - 30,000 rpm.
• Application - chrome-cobalt, porcelain.

Packaging:

• 1 piece.

Super flexible double-sided separator for separating and contouring ceramics.

Characteristics:

• Mounted on a mandrel.
• Diameter 22mm.
• Thickness 0.17mm.
• Red stripe.
• 5' - 10000 rpm.

Packaging:

• 1 piece.

Double-sided separator with a diamond coating mounted on a holder.

Features:

• Diameter 22x0.30mm.

Package:

1 piece.

Rubber polishing wheels. WiroFlex.

Features:

• Very thin and flexible.
• Applicable to all dental alloys.
• Diameter 22x1.2mm.

Package:

1 piece.

Two-sided separator with diamond coating. For cutting plaster models.

Description:

• 45mm diameter.

• Diamond coating according to / ISO 514 (60/40 microns) - Fine

• Diamond grit acc. To / ISO 524 (100/80 microns) - Coarse

Package:

• 1 piece.

Double-sided separator with a diamond coating for cutting gypsum models.

Description:

• 30mm diameter

• Diamond coating according to / ISO 514 (60/40 microns) - Fine

• Diamond grit acc. To / ISO 524 (100/80 microns) - Coarse

Package:

• 1 piece.

MIZZY White stones are made of aluminum oxide.

Application:

• For porcelain.
• Precious and semi-precious metals.

Advantages:

• They cut quickly and accurately and wear evenly.
• Size 5 diameter 22.2 x 3.1mm.

Packaging:

• 1pcs or 50pcs

Packaging:

• 1pcs or 50pcs

EcoChrom rubber for metal, very durable.

Features:

• Brown color
• Diameter 6x22mm
• Speed 8.000- 15.000 rpm. max. 20,000 rpm

Package:

100 pcs

An instrument for shaping polishing erasers, restoring the desired shape to the erasers.

• The instrument is covered with a thick diamond coating.

Packaging:

• 1 piece

Diamond disc (full diamond) for contouring CoCr alloys.

Characteristics:

• Operating range 5-15000 rpm.
• Diameter 8 mm
• Thickness 0.40mm
• Mounted and centered.

Packaging:

• 1 piece

Reinforced disc for a polisher-grinder.

Characteristics:

• Reinforced on both sides with fiberglass mesh.
• For cutting casting channels.
• Diameter 125x1.0mm

Packaging:

• 1 piece.

Armored shields with a handle.

Benefits:

• Reinforced on both sides with a high-performance and durable fiberglass mesh.
• For cutting steel and precious alloys.
• It does not heat the processed material.
• max. speed 38,000 rpm.

Characteristics:

• White color, thickness 40x0.4mm
• yellow color, thickness 40x05 mm,
• green color, thickness 40x0.7 mm,
• blue color, thickness 40x1.0 mm,
• Red color, thickness 40x1.0 mm with reinforcement.

Package:

1 piece.

Flexible silicone polishing erasers.

Intended for processing:

• Porcelain.
• Precious alloys.
• Acrylic.

Characteristics:

• Blue, fine-grained eraser.
• Mirror polishing.
• Speed - 7,000- 10,000 rpm.
• Size 22x3mm

Packaging:

• 1 piece.

EVE Diasynt Plus / Diapro

A three-stage set of rubbers and stones for the processing of lithium disilicate

Kit composition:

• DIASYNT PLUS stones - pretreatment,
• DIAPRO brown rubbers - smoothing and pre-polishing,
• DIAPRO lime rubbers - high gloss polishing.

Recommended for polishing restorations made of IPS e.max press and other restorations made of Lithium Disilicate, e.g. AMBER Mill

Package:

• stones - 3 pcs
• medium brown erasers - 3 pcs
• fine lime rubber bands - 3 pcs

Carborundum discs.

• Size 38x0.6mm.
• Brown color.

Package:

• 1 piece.

Silicone erasers filled with natural diamond particles for quick finishing and polishing of ceramic restorations.

Advantages:

• They do not require polishing paste.
• Long lasting service life.
• Low heat generation.

Packaging:

• 3 pieces

Glass fiber reinforced diamond grinding discs, designed for processing and cutting ceramic materials, especially suitable for lithium disilicate.

Renfert catalog number 560820

Advantages:

• They prevent cracking of ceramic materials due to low heat generation.
• Safe trimming of filler channels thanks to very high removal efficiency.
• Gentle to the material thanks to extremely low vibrations
• Max speed 50000 rpm

Packaging:

• 1 piece

Renfert silicone erasers are recommended for pre-processing of porcelain and metal. Highly abrasive, they do not leave streaks or "orange film" on the treated surface.

Renfert catalog number 860000

Advantages:

• They grind hard - grinding the surface, shaping.
• No streaks on the ceramic surface.
• They are perfect for processing places where the alloy is adjacent to porcelain.

Technical data:

• Ø 22mm.
• Thickness 3.2 mm.
• Maximum speed 15000 rpm

Packaging:

• 100 pcs.

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.

Features:

• Milli-Micron Diamond - 15,000 - 30,000 rpm.
• Application - chrome- cobalt, porcelain.

Package:

1 piece.

The Klettfix system is an affordable solution for wet trimming, ensuring high cutting efficiency.

Renfert catalog number 18031100 - grit 80, 18031200 - grit 120

Advantages:

• Disc for MT Plus./ MT 3/ MT3 pro.
• Gradation 80 (coarse) or 120 (fine)
• Diameter 23.4 cm

Packaging:

• 1 piece.

Corundum discs for cutting casting channels.

• Diameter 38 mm
• Thickness 1.0mm

Package:

• 1 piece

Ceramic grinding wheel 80/10 mm for mounting on a stationary grinder.

Application:

• for rough grinding of metals, precious alloys, chrome, cobalt, stainless steel and other non-precious alloys.
• max speed 2800 rpm

Package:

1 piece

Ultrathin reinforced diamond separator.

Advantages:

• Very flexible, with high performance and strength.
• Double reinforcement with a very thin glass fiber mesh.

Application:

• for cutting and processing porcelain and zirconium

Speed max:

• 50,000 rpm
• Diameter 20 / 0.3 mm

Packaging:

1 piece.

Ultra-thin grinding wheel for steel and alloys.

Features:

• Very flexible, reinforced on both sides with a glass fiber mesh, with high efficiency and durability.
• For cutting steel, precious alloys and plastics.
• It does not cause heating of the processed material and excessive load on power tools.
• Max rotation speed: 50,000 rpm
• Diameter 22x02 + BF

Package:

1 piece.

Plaster disc with diamond edge.

Description:

• Use in the range from 3 to 5000 rpm.
• Hole diameter: 16 mm.
• Outer diameter: 75 mm
• Disc thickness: 0.35 mm.

Packaging:

• 1 piece

A set of rubber bands and stones for the contra-angle for the preparation of zirconium by the dentist.

Package:

1 set

EveFlex The highest quality hard polishing rubbers intended for processing such materials as: chrome, cobalt, precious and non-precious alloys. They are characterized by durability and are intended for works where it is required to keep the shape of the rubber band, and not its flexibility.

Blue EveFlex 500:

• very coarse for roughing

Gray EveFlex 600:

• coarse-grained for pre-treatment

EveFlex 700 red:

• medium-grained for polishing

Green Eveflex 800:

• fine-grained for final polishing.

Attention:

Please select a shape from the drop-down list below the picture and select the shape according to the numbering.

Package:

• 1 piece

Reinforced shields 38x1.0mm

The color may differ from that shown in the photo.

Package:

• 1 piece

Cutter for metal, plaster and hard acrylic.

Package:

• 1 piece

Diadur - Ceramic stones with diamond coating.

Embankment:

• Medium (medium)

Advantages:

• maintains its shape during wear.
• excellent durability
• heat resistant, does not overheat during operation.
• recommended working speed 10,000 - 15,000 rpm. max. 35,000 minutes

Package:

1 piece.

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.

Features:

• Milli-Micron Diamond - 15,000 - 30,000 rpm.
• Application - chrome- cobalt, porcelain.

Package:

• 1 piece.

Particularly recommended for cutting sprues and processing cast metal frames.

Renfert catalog number 652000

Advantages:

• Long service life under heavy loads.
• Efficiency.

Technical data:

• Ø 38mm.
• Thickness 0.6 mm.
• For the handpiece.
• Application to metal.
• Max. rpm 25000 rpm.

Packaging:

• 1 piece

Blue EVE eraser for the final polishing of acrylic. Reinforced with an aluminum oxide compound that extends the life and reliability of the eraser. Can be sterilized in autoclaves for 30-45 minutes.

Characteristics:

• dark blue [coarse]: reduction and shaping
• light blue [medium]: smoothing

Packaging:

• 1 piece.

Dura-Green stones are made of high quality silicon carbide.

Application:

• For porcelain.
• For composite.
• For precious metals.

Recommended rotational speed for Dura-Green stones:

• from 5,000 to 20,000 rpm.

Packaging:

• 1 piece

A set of drills and erasers for milling 0 degrees

Package:

1 set contains 12 cutters and 6 rubbers

Sidia synthetic diamond are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer wears out, more sharp diamond particles emerge.

Features:

• Micro diamond 15,000 - 30,000 rpm.
• Application - chrome - cobalt, palladium, porcelain.

Package:

• 1 piece.

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at the temperature of 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.

Features:

• Micro Diamond - 15,000 - 30,000 rpm.
• The use of chrome- cobalt, palladium, porcelain.

Package:

• 1 piece.

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at the temperature of 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.

Features:

• Micro Diamond - 15,000 - 30,000 rpm.
• The use of chrome- cobalt, palladium, porcelain.

Package:

• 1 piece.

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at 700 degrees Celsius. As the outer layer wears out, more sharp diamond particles emerge.

Characteristics:

• Diamond Micro - 15,000 - 30,000 rpm.
• Application: chrome - cobalt, palladium, porcelain.

Packaging:

• 1 piece.

Sidia synthetic diamonds are sintered from gold, bronze, tantalum and manganese at the temperature of 700 ° C. As the outer layer is worn out, more sharp diamond particles emerge.

Features:

• Micro Diamond - 15,000 - 30,000 rpm.
• The use of chrome- cobalt, palladium, porcelain.

Package:

• 1 piece.

Sidia synthetic diamond are sintered from gold, bronze, tantalum and manganese at 700 ° C. As the outer layer wears out, more sharp diamond particles emerge.

Features:

• Micro diamond 15,000 - 30,000 rpm.
• Application - chrome - cobalt, palladium, porcelain.

Package:

• 1 piece.

Plaster disc with diamond edge.

Description:

• Use in the range from 3 to 5000 rpm.
• Hole diameter: 20 mm.
• Outer diameter: 75 mm
• Disc thickness: 0.35 mm.

Packaging:

• 1 piece

Diaphragm rubbers with diamond coating for processing and polishing works made of Lithium Disilicate.

Advice:

• we recommend DIASYNT PLUS stones for initial grinding

Characteristics:

• Brown color (medium). Pre-polishing.
• Speed 7.000- 12.000 rpm, max.20.000 rpm
• Size 17x1.8mm

Package:

• 1 piece

The green Eveflex eraser is intended for processing precious and base metals to obtain a high gloss.

Description:

• Dimensions: width 22.0 mm and thickness 4.0 mm.
• Recommended operating speed 7,000 - 12,000 rpm.
• To be mounted on a mandrill.

Packaging:

• 1 piece

Ultrathin reinforced diamond separator.

Advantages:

• Very flexible, with high performance and strength.
• Double reinforcement with a very thin glass fiber mesh.

Application:

• for cutting and processing porcelain and zirconium

Speed max:

• 50,000 rpm
• Diameter 20 / 0.2 mm

Packaging:

1 piece.

Ultra-thin grinding wheel for steel and alloys.

Features:

• Very flexible, reinforced on both sides with a glass fiber mesh, with high efficiency and durability.
• For cutting steel, precious alloys and plastics.
• It does not cause heating of the processed material and excessive load on power tools.
• Max rotation speed: 50,000 rpm
• Diameter 26x02 + BF

Package:

1 piece.