TD Master-Cast Tooth Strainer

A strainer for setting and scalding teeth using the infusion method.

The arrangement of the teeth in a specific pattern makes it impossible to mix them up.

Characteristics:

• internal dimensions: 105 x 80 x 50 mm.

Packaging:

• 1 pc.

Groove bur Master Cast 1 piece

Milling cutter for creating retention in artificial teeth.

Retention strengthens the connection between the teeth and the denture plate.

**Characteristics:

• 2.35 mm shank, for handpiece;
• revolutions 5,000 – max. 15,000 min-1.

Packaging:

• 1 pc.

Vertex Castavaria 1000g

Vertex Castavaria pressure-curing acrylic for the production of full and partial dentures using the pouring technique.

Characteristics:

• minimized shrinkage;
• color stability;
• extended liquid phase.

Application:

• complete dentures;
• skeletal prostheses.

Technical data:

• dough phase: 8 <…> 9 minutes;
• working time: 13 minutes;
• curing time: 30 minutes at 55°C and 2.5 bar pressure;
• mixing ratio by volume/parts by weight: 1 ml / 0.95 g liquid (monomer)1.7 g powder (polymer);
• impact resistance: 8.3 kJ/m²;
• bending strength: 79 MPa;
• modulus of elasticity in bending: 2316 MPa;
• water sorption: 23.2 µg/mm³;
• Solubility: 1.8 µg/mm³

Packaging:

• 1000g

Villacryl Bond 10ml

Villacryl Bond is a liquid preparation that improves the adhesion of acrylic teeth to the acrylic denture plate.

• It is recommended for full and partial dentures made using the pouring technique.

• It can also be used in traditional plaster pouring techniques as well as in silicone pouches.

Advantages:

• increases the adhesion between the denture plate and acrylic teeth;
• easy and convenient to use;
• can be used for all types of acrylic teeth.

How to use:

• bond intended for application to the previously matted mucosal part of acrylic teeth;
• After the wax has been boiled, the mold with the acrylic teeth should be dried using compressed air;
• apply the liquid with a brush;
• wait about 30 seconds for the preparation to evaporate;
• After evaporation, you can start working.

Packaging:

• 10ml

Dreve Isolat film 1000ml

Dreve Isolat film is a high-quality, heat-resistant alginate-based isolating agent, essential for everyday prosthetic work. The product is designed to ensure precise surface separation, resulting in excellent results in laboratory work.

Isolat film is a proven solution for professional prosthetic laboratories, guaranteeing ease of work and repeatable results.

Characteristics:

• precise application: creates an extremely thin layer without affecting the dimensions of the model;
• high surface quality: allows for smooth and non-porous surfaces of prosthetic works;
• versatility of use: ideal for insulating materials in the following systems: plaster-plastic, plaster-plaster and plaster-silicone;
• heat resistance: stable formula that works well in demanding laboratory processes.

Technical data:

• Color: reddish – transparent;
• pH value: 9-10;
• Manufacturer: Dreve;
• Catalog number: D4304;
• Capacity: 1000 ml.

Packaging:

• 1 pc.

Dreve Polymax 1 polymerizer 120 °C

The Dreve Polymax 1 pressure polymerizer (120 °C) is a reliable device that is perfect for repairs, relining and making dentures using the pouring method.

Dreve catalog number D3428

Characteristics:

• precisely controlled temperature for cold and hot polymerization;
• temperature range up to 120°C;
• 90 minute timer;
• automatic safety sealing system;
• the center is made of specially coated aluminum;
• The device has protection against opening the cover when it is turned off.

Technical data:

• dimensions (height x width x depth) 230 x 290 x 300 mm;
• input power 450 W;
• frequency 50-60 Hz;
• pressure 3-4.2 bar (variable);
• pressure pot diameter 160 mm;
• pressure pot depth 110 mm;
• pressure pot capacity 2.2 l;
• weight 10.2 kg;
• temperature range up to 120° C.

Scope of delivery:

• Polymax including pressure hose and water drain hose

Dreve Castdon box for making dentures by pouring method

A box for making prostheses using the pouring method.

Dreve catalog number D3803

Characteristics:

• transparent top of the can:
• steel bottom plate with integrated chambers for removing wax from teeth:
• the set includes a device for piercing channels, Ø 8 mm.

Packaging:

• 1 pc. can
• 1 pc. Instrument for cutting channels Ø 8mm

Dreve Siliform silicone 2x850 ml

Addition-cured, non-shrink silicone for the pouring technique.

Dreve catalog number D38605

Characteristics:

• used for embedding prostheses in the pouring technique;
• enables precise reproduction of details;
• a slightly oily surface layer ensures excellent resin fluidity;
• Final hardness of 14 Shore A enables easy removal from molds;
• 1:1 dosage.

Packaging:

• 1 base 850ml + 1 catalyst 850ml

Dreve Instrument for cutting channels in agar and silicone Ø 8mm

An instrument for cutting out pouring channels in agar and silicone when making prostheses using the pouring method.

Dreve catalog number D3872

Packaging:

• 1 pc.

DREVE Polymax 5 polymerizer 95°C

Dreve Polymax 5 pressure polymerizer.

A modern polymerizer guaranteeing high quality of prosthetic work.

Thanks to its high pressure and temperature stabilization, the polymerizer is perfect for making prostheses using the pouring method.

The large volume of the pressure pot also allows for the placement of large articulators, three brass cans with frames or four Castdon cans.

Characteristics:

• steplessly adjustable temperature for cold and hot polymerization;
• 90 minute timer;
• automatic safety sealing system;
• pressure pot made of specially coated aluminum;
• maintenance-free technology;
• very spacious chamber - possibility of placing the entire articulator.

Technical data:

• external dimensions: 34.5 x 38.5 x 31.0 cm;
• voltage: 230 V, 50/60 Hz;
• power:900 W;
• adjustable pressure from 3 to 6 bar;
• reaches temperatures up to 95 °C.

Scope of delivery:

• Polymax including pressure hose and water drain hose.

Packaging:

• 1 pc.

DREVE Polymax 3 polymerizer 95°C

Dreve Polymax 3 pressure polymerizer.

A modern polymerizer guaranteeing high quality of prosthetic work.

Thanks to its high pressure and temperature stabilization, the polymerizer is perfect for making prostheses using the pouring method.

It is optimally suited for finishing dentures.

Holds three brass tins including the frame or up to six Castdon tins for the pour method!

Characteristics:

• steplessly adjustable temperature for cold and hot polymerization;
• 90 minute timer;
• automatic safety sealing system;
• pressure pot made of specially coated aluminum.

Technical data:

• external dimensions: 29.5 x 31.5 x 44.0 cm;
• voltage: 230 V, 50/60 Hz;
• power: 900 W;
• adjustable pressure from 2 to 5 bar;
• reaches temperatures up to 95 °C.

Scope of delivery:

• Polymax including pressure hose and water drain hose.

Packaging:

• 1 pc.

Dreve Castdon pink opaque powder 750g

Castdon is a high-quality acrylic designed for the pouring technique, based on a polymethyl methacrylate copolymer. The product is characterized by an aesthetic pink opaque shade (opaque pink), ensuring an excellent visual effect in prosthetic restorations.

Dreve catalog number D3884

Characteristics:

• casting phase: 2-3 min;
• mixing ratio: 10: 7 (polymer/monomer);
• Vickers hardness: > 135 MPa;
• bending strength > 60 MPa;
• flexural modulus: > 1500 MPa;
• residual monomer value: < 4.5%;
• water absorption: < 32 μg/mm³;
• solubility in water: < 8 μg/mm³.

Packaging:

• 750g

Dreve Castdon liquid 1l

Castdon professional resin mixing fluid, based on methyl methacrylate. This Dreve product was designed for precision work in dental prosthetics, ensuring optimal working properties when preparing materials using the pouring method.

Dreve catalog number D3867

Characteristics:

• the preparation is characterized by high-quality ingredients, which translates into stability and repeatability of the final results in the daily work of the prosthetic laboratory;
• This is an essential component of the Castdon system, ensuring proper consistency and ease of application.

Packaging :

• 1l of liquid

Dreve Castdon powder pink transparent 750g

Castdon is a high-quality acrylic designed for the pouring technique, based on a polymethyl methacrylate copolymer. The product is characterized by an aesthetically pleasing pink transparent shade, ensuring an excellent visual effect in prosthetic restorations.

Dreve catalog number D3873

Characteristics:

• casting phase: 2-3 min;
• mixing ratio: 10: 7 (polymer/monomer);
• Vickers hardness: > 135 MPa;
• bending strength > 60 MPa;
• flexural modulus: > 1500 MPa;
• residual monomer value: < 4.5%;
• water absorption: < 32 μg/mm³;
• solubility in water: < 8 μg/mm³.

Packaging:

• 750g

Dreve Castdon Starter Kit, pink-transparent

Dreve Castdon Starter Kit – professional kit for the pouring method

The Dreve Castdon starter kit is a comprehensive solution for fabricating dentures using the pouring method. The product allows for the precise preparation of up to 12 dentures, ensuring high quality and aesthetics of the finished prosthetics.

Dreve catalog number D3790

Characteristics:

• Castdon is a proven system that, thanks to its efficiency and complete equipment, is the ideal choice for prosthetic laboratories focusing on efficiency.

Set composition:

• Toothpaste strainer can;
• Castadon liquid 0.5l;
• Castadon powder 0.750g (transparent pink with veins);
• Sprue cutter;
• Isolat film 1 l;
• Silicone Siliform 2 x 1 kg 1:1;
• Measuring cup for powder and liquid.

Packaging :

• 1 set

Dreve Castdon liquid 500ml

Castdon professional resin mixing fluid, based on methyl methacrylate. This Dreve product was designed for precision work in dental prosthetics, ensuring optimal working properties when preparing materials using the pouring method.

Dreve catalog number D3865

Characteristics:

• the preparation is characterized by high-quality ingredients, which translates into stability and repeatability of the final results in the daily work of the prosthetic laboratory;
• This is an essential component of the Castdon system, ensuring proper consistency and ease of application.

Packaging:

• 500 ml

Dreve Castdon acrylic dispensers

Acrylic dispensers for the pouring method.

Characteristics:

• ensure optimal mixing ratios of powder and liquid.

Packaging:

• set of 2 pieces

FuturaGen Com4 monomer 1000ml NEW

FuturaGen Com4 Cold Acrylic Fluid.

Packaging:

• 1000ml

Dreve Castdon Starter Kit, pink-opaque

Dreve Castdon Starter Kit – professional kit for the pouring method

The Dreve Castdon starter kit is a comprehensive solution for fabricating dentures using the pouring method. The product allows for the precise preparation of up to 12 dentures, ensuring high quality and aesthetics of the finished prosthetics.

Dreve catalog number D3792

Characteristics:

• Castdon is a proven system that, thanks to its efficiency and complete equipment, is the ideal choice for prosthetic laboratories focusing on efficiency.

Set composition:

• Toothpaste strainer can;
• Castadon liquid 0.5l;
• Castadon powder 0.750g (pink opaque);
• Sprue cutter;
• Isolat film 1 l;
• Silicone Siliform 2 x 1 kg 1:1;
• Measuring cup for powder and liquid.

Packaging:

• 1 set

Vertex Castavaria color 10 polymer 4000g

Vertex Castavaria pressure-curing acrylic for the production of full and partial dentures using the pouring technique.

Characteristics:

• color 10 pink transparent with veins;
• minimized shrinkage;
• color stability;
• extended liquid phase.

Application:

• complete dentures;
• skeletal prostheses.

Technical data:

• dough phase: 8 <…> 9 minutes;
• working time: 13 minutes;
• curing time: 30 minutes at 55°C and 2.5 bar pressure;
• mixing ratio by volume/parts by weight: 1 ml / 0.95 g liquid (monomer)1.7 g powder (polymer);
• impact resistance: 8.3 kJ/m²;
• bending strength: 79 MPa;
• modulus of elasticity in bending: 2316 MPa;
• water sorption: 23.2 µg/mm³;
• Solubility: 1.8 µg/mm³

Packaging:

• 4000g

Vertex Castavaria monomer 1000 ml

Vertex Castavaria acrylic fluid for the pouring technique.

Packaging:

• 1000ml

Dreve Agar Gelon colorless 6kg

Dreve Agar Gelon is a high-quality gel designed for precise duplication of investment models. The product is distinguished by its exceptional hardness and excellent form stability.

Designed specifically for demanding pouring techniques, the gel allows for quick and precise work, thanks to the material's low shrinkage and short curing times.

Dreve catalog number D38601

Physical data:

• melting point 92 °C;
• casting temperature 45-46 °C;
• freezing point approx. 38 °C;
• curing time approx. 45 min;
• deformation under pressure approx. 8%;
• residual deformation approx. 0.5.

Packaging:

• 6kg

Dreve Polymax 1 polymerizer 95°C

Dreve Polymax 1 is an efficient pressure polymerizer designed for precise prosthetic work.

The modern design of the device guarantees high quality of finished restorations, and thanks to advanced pressure and temperature stabilization (up to 95°C), the polymerizer is perfect for processes requiring the highest precision, including the production of dentures using the pouring method.

Dreve catalog number D3429

Characteristics:

• smooth temperature control enabling cold and hot polymerization;
• 90-minute timer;
• automatic safe sealing system;
• pressure pot made of specially coated aluminum;
• maintenance-free construction.

Technical Data:

• dimensions (height x width x depth) 230 x 290 x 300 mm;
• input power 450 W;
• frequency 50-60 Hz;
• pressure 3-5.2 bar (variable);
• pressure pot diameter 160 mm;
• pressure pot depth 110 mm;
• pressure pot capacity 2.2 l;
• weight 10.2 kg;

• temperature range up to 95° C.

  Scope of delivery:

• Polymax including pressure hose and water drain hose.

Packaging:

• 1 pc.

FuturaGen Com4 polymer color pink 1000g NEW

Cold curing acrylic, perfect for the pouring method.

Application:

• complete dentures;
• partial restorations;
• denture repairs;
• relining of dentures.

Characteristics:

• minimal residual monomer content, which increases safety of use;
• high mechanical strength, making it also suitable for making occlusal splints;
• very good adaptation thanks to reduced polymerization shrinkage, which is especially important when working on implants;
• smooth surface reduces plaque build-up;
• color pink.

Packaging:

• 1kg

Replicast - S can for pouring method

A container for prostheses made by the pouring method.

Packaging:

• 1 pc.

Vertex Castavaria color 10 4000g + 2x1000 ml set

Vertex Castavaria pressure-curing acrylic for the production of full and partial dentures using the pouring technique.

Characteristics:

• color 10 - pink with veins;
• minimized shrinkage;
• color stability;
• extended liquid phase.

Application:

• complete dentures;
• skeletal prostheses.

Packaging:

• 4000 g powder color 10
• 2x1000 ml liquid