Duracrol polymer 500g
Duracrol, a self-polymerizing acrylic resin for making custom spoons.
Characteristics:
- for making individual impression trays and phantom models;
- convenient and easy to use;
- yellow color.
Packaging:
- 500g
Tessex AL shellac plates 12 pieces
Shellac plates with an admixture of aluminum.
Individual impression trays for impressions of edentulous jaws.
Characteristics:
- optimal durability;
- easy adaptation and processing;
- shape stability after cooling;
- do not stick to plaster.
Packaging:
- 12 pcs. of tiles in a package, top or bottom
Villacryl IT for individual spoons 750g/200 ml
Self-polymerizing acrylic material intended for making individual impression trays.
The material is available in two colors: green and pink.
Pink acrylic allows for the production of bite gauges and fitting of teeth set in wax directly on the plate (wax rollers).
Advantages:
- easy to prepare and process;
- ready to use immediately after mixing;
- does not stick to hands;
- short spoon preparation time;
- does not contain heavy metals.
Color:
- green;
- pink.
Technical data:
- shelf life of the dough - 5';
- time to prepare the dough for use - 30-60'';
- self-polymerization time - 9';
- mixing proportions - 21 g powder/6 ml (5.6 g) liquid;
- fracture strength - >37 MPa.
Packaging:
- 750g/200ml
Villacryl IT LC light-curing tray material 50 pieces
Villacryl IT LC is a light-curing acrylic material for making individual impression trays.
Characteristics:
- high hardness;
- unlimited working time thanks to light curing;
- large plates allow you to make even the largest individual spoon or 2 smaller ones;
- dimensional stability;
- biologically neutral;
- pink color.
Technical data:
- plate thickness: 2mm;
- polymerization: light with an intensity of 380-406 nm – 3-5 minutes, depending on the type of lamp (UV, Vis and halogen);
- fracture strength: 40 MPa.
Packaging:
- 1 pack
Villacryl IT polymer 750g
Self-polymerizing acrylic material intended for making individual impression trays.
The material is available in two colors: green and pink.
Pink acrylic allows for the production of bite gauges and fitting of teeth set in wax directly on the plate (wax rollers).
Advantages:
- easy to prepare and process;
- ready to use immediately after mixing;
- does not stick to hands;
- short spoon preparation time;
- does not contain heavy metals.
Color:
- green;
- pink.
Technical data:
- shelf life of the dough - 5';
- time to prepare the dough for use - 30-60'';
- self-polymerization time - 9';
- mixing proportions - 21 g powder/6 ml (5.6 g) liquid;
- fracture strength - >37 MPa.
Packaging:
- 750g
EcoTray LC Premium light-cured material for individual trays Promotion
''Eco'' product line - excellent quality at a reasonable price
EcoTray LC Premium new high-quality light-cured material for individual trays.
Polymerization:
- wavelength of light for polymerization 300-400nm;
- polymerization minimum UV/halogen 3-5 minutes;
- It is recommended to polymerize in UV light polymerizing devices with a power of at least 36 W.
Characteristics:
- high dimensional stability;
- break-resistant;
- thickness about 2 to 2.4mm;
- very low shrinkage (2.08 vol%);
- low water absorption (<0.1%);
- color pink.
Application:
- individual impression trays;
- base plates for wax-up;
- functional individual trays for impressions under crowns and bridges;
- bite plates for occlusal registration.
Safety tip:
- Light-cured plates contain methacrylates, which are a potential contact allergen. To avoid direct contact with the skin, the plates are provided with an inhibition layer of petroleum jelly. After curing in the device, it is visible on the plates as a layer of grease. This layer can be wiped off with an alcohol-soaked cloth after light curing. This is an additional step to protect your skin.
Packaging:
- 50 pcs.
Elite LC Tray for spoons 50pcs
Elite LC Tray is a line of light-cured resins for individual impression trays.
Also recommended for making base plates for tooth positioning and bite plates in removable dentures.
Characteristic:
- cured with halogen light or UV light (3 – 5 minutes);
- stable in daylight or artificial light for about 20:00 min;
- available in three colours: blue, white and pink;
- minimal polymerization shrinkage.
Advantages:
- easy to model, not sticky;
- speed of work, allows for saving time compared to traditional self-curing resins;
- universal.
Product data:
- curing time 03:00 - 05:00 min;
- thickness 2.5 mm;
- hardness (Shore D) 80;
- curing UV light (350 - 400 nm), halogen light (420 - 480 nm).
Packaging:
- 50pcs/pack
Shellac bottom plates 1 piece
Shellac base plates, bottom.
Characteristics:
- stable shape;
- pink color;
- thickness approximately 1.3 mm.
Composition:
- shellac, stearin, talc, mica.
Application:
- Making individual impression trays, bite ridges, and impressions to determine the bite.
Packaging:
- 1 pc. bottom
Morsa LC Tray light-cured material for individual trays 50pcs. Promotion
For the production of individual and functional impression trays.
The material is also indicated for the production of base plates for wax models and bite templates.
The material can be cured with halogen and UV.
Once properly cured, the material is dimensionally stable.
Characteristics:
- polymerization in a UV or halogen light curing lamp, the upper part of the spoon on the model for 3-5 minutes, the bottom of the spoon off the model for 3-5 minutes;
- use alcohol to remove the smear layer.
Precautions:
- the material contains methacrylates, do not use in patients with allergies to methacrylates or other substances contained in the product.
- Always use a hood when trimming a spoon!
Packaging:
- 1pack/50pcs.
Hoffmann's Shellac Lower Spoons 100 pieces
Shellac base plates lower.
Characteristics:
- stable shape;
- pink color;
- thickness approximately 1.3 mm.
Composition:
- shellac, stearin, talc, mica.
Application:
- Making individual impression trays, bite ridges, and impressions to determine the bite.
Packaging:
- 100pcs bottom
Hoffmann's Shellac Top Spoons 100 pieces
Shellac base upper plates.
Characteristics:
- stable shape;
- pink color;
- thickness approximately 1.3 mm.
Composition:
- shellac, stearin, talc, mica.
Application:
- Making individual impression trays, bite ridges, and impressions to determine the bite.
Packaging:
- 100 pcs top
Hoffmann's Shellac Bottom Plates 12 pcs
Shellac base plates, bottom.
Characteristics:
- stable shape;
- pink color;
- thickness approximately 1.3 mm.
Composition:
- shellac, stearin, talc, mica.
Application:
- Making individual impression trays, bite ridges, and impressions to determine the bite.
Packaging:
- 12 pcs. bottom
Hoffmann's shellac top plates 12 pieces
Shellac base and top plates.
Characteristics:
- stable shape;
- pink color;
- thickness approximately 1.3 mm.
Composition:
- shellac, stearin, talc, mica.
Application:
- Making individual impression trays, bite ridges, and impressions to determine the bite.
Packaging:
- 1 pc. top