BegoForm Bego protective mass 15x90g

BegoForm refractory post material for inlays, veneers and onlays.

Catalog number BEGO 52785

Characteristics:

• posts with high edge strength, smooth and precise;
• the properties and expansion of BegoForm® have been adapted to ceramics from well-known manufacturers, enabling excellent accuracy of fit to individually layered inlays, onlays and veneers;
• the constant, high firing stability of BegoForm®, even after several cycles, enables ceramic corrections without loss of precision;
• Reliable expansion control for perfect fitting results thanks to the special BegoForm® mixing fluid.

Packaging:

• Set of 15 bags x 90g

Ips PressVEST Premium Powder 100g

Ips PressVEST Premium Powder.

Product description:

• IPS PressVest Premium is a universal, phosphate-bonded investment material (Type 1, Class 1 and 2) that can be used with Ivoclar press ceramic materials.
• It can be used in both the speed heating procedure and the conventional procedure.

Speed heating procedure:

• the ring is placed in an oven heated to its final temperature and then, after a specified time, transferred to the pressing oven.

Conventional heating procedure:

• the ring is placed in an unheated oven (room temperature) and heated to the final temperature as recommended. After a specified time, the ring is transferred to the pressing oven.

Indications:

• IPS Press VEST Premium can be used with the following Ivoclar press ceramic materials

• IPS e.max Press;

• IPS e.max ZirPress;
• IPS InLine PoM (Press-on Metal);

Storage:

• store at 12-28°C;
• store the powder in a dry place;
• do not store the liquid at a temperature lower than +5 °C (due to its sensitivity to low temperatures!), if the liquid freezes, it becomes unsuitable for use due to crystallization.

Temperature at which the material can be used:

• ambient temperature 18 °C - max. 23 °C;
• Temperatures significantly outside this range may significantly affect the setting process;
• lower ambient temperature slows down the chemical process;
• higher ambient temperature accelerates the chemical process (from temp. 23 - 28 °C the fluid with water can be cooled to 12 °C.

Mixing proportions:

• By diluting the liquid, it is possible to control the expansion of the investment material, which affects the fit of the overpressed restoration;
• liquid concentration is expressed in %;

• The important proportions of the mixed liquid (investment liquid + distilled water) depend on the amount of powder and must be strictly adhered to.

• 100 g powder: 26 ml liquid (investment liquid + distilled water);

• 200 g powder: 52 ml liquid (investment liquid + distilled water);
• 300 g powder: 78 ml liquid (investment liquid + distilled water);

The following fluid concentration information is a guide only and may be adjusted depending on job size and mixing conditions.

Do not dilute the liquid below 50%!

Packaging:

-100g

Ips PressVEST Premium Liquid 500 ml The liquid is sensitive to low temperatures - winter shipping at the risk of the customer

IPS PressVest Premium investment material mixing liquid.

IPS PressVEST Premium is a universal, phosphated casting material intended for use in combination with Ivoclar pressable ceramics.

Packaging:

• 500ml

BegoForm Bego liquid 250ml

BegoForm investment liquid.

BEGO catalog number 52786

Packaging:

• 250 ml

IPS PressVEST Premium Liquid 1l - The liquid is sensitive to low temperatures - shipping in winter is at the risk of the customer.

IPS PressVest Premium investment material mixing liquid.

IPS PressVEST Premium is a universal, phosphated casting material intended for use in combination with Ivoclar pressable ceramics.

Packaging:

• 1l

Siladent Liquid for investment material type 100 1L

TYPE 100 - liquid for the investment materials from Siladent.

Package:

• 1000 ml

Silavest Press 100g

Phosphate-bound, graphite-free, precision investment for all ceramic systems and high-speed pressed ceramics. Silavest Press can be used with ceramics pressed against metal and zircons.

Benefits:

• perfect match
• very smooth surface
• a fine-grained mass with a creamy consistency
• for all press ceramics systems
• easy released
• should be used with SILADENT type 100 expansion fluid.

Package:

• 100g

GC LiSi PRESS VEST liquid 900 ml - Liquid sensitive to low temperature - shipping in winter at the customer's risk.

GC LiSi PressVest - liquid. Low temperature sensitive liquid - shipping in winter at the customer's risk.

Package:

• 900 ml.

GC LiSi PRESS VEST POWDER 60x100g

Phosphate investment material used in the press ceramics technique. For the quick heating process.

Package:

60x100 g

IPS PressVEST Premium Powder 5kg (50x100g)

IPS PressVEST Premium Powder

Product description:

• IPS PressVest Premium is a universal, phosphate-bonded investment material (Type 1, Class 1 and 2) that can be used with Ivoclar press ceramic materials;
• It can be used in both the speed heating procedure and the conventional procedure.

Speed heating procedure:

• the ring is placed in an oven heated to its final temperature and then, after a specified time, transferred to the pressing oven;

Conventional heating procedure:

• the ring is placed in an unheated oven (room temperature) and heated to the final temperature as recommended. After a specified time, the ring is transferred to the pressing oven.

Indications:

**IPS Press VEST Premium can be used with the following Ivoclar press ceramics:

• IPS e.max Press;
• IPS e.max ZirPress;
• IPS InLine PoM (Press-on Metal).

Storage:

• store at 12-28°C;
• store the powder in a dry place;
• do not store the liquid at a temperature lower than +5 °C (due to its sensitivity to low temperatures!), if the liquid freezes, it becomes unsuitable for use due to crystallization.

Temperature at which the material can be used:

• ambient temperature 18 °C - max. 23 °C;
• Temperatures significantly outside this range may significantly affect the setting process;
• lower ambient temperature slows down the chemical process;
• higher ambient temperature accelerates the chemical process (from temp. 23 - 28 °C the fluid with water can be cooled to 12 °C.

Mixing proportions:

• By diluting the liquid, it is possible to control the expansion of the investment material, which affects the fit of the overpressed restoration.
• Liquid concentration is expressed in %.
• The important proportions of the mixed liquid (investment liquid + distilled water) depend on the amount of powder and must be strictly adhered to.
• 100 g powder: 26 ml liquid (investment liquid + distilled water);
• 200 g powder: 52 ml liquid (investment liquid + distilled water);
• 300 g powder: 78 ml liquid (investment liquid + distilled water);

The following fluid concentration information is a guide only and may be adjusted depending on job size and mixing conditions.

Do not dilute the liquid below 50%!

Packaging:

• 50 x 100g