20 l round gypsum tank

Plaster sedimentation tank with compartments.

Characteristics:

• Partitions enable any connection of the settling tank to the sewage system.
• It is only necessary to remember about the cascade principle (water overflowing into successive and lower chambers) for the device to fulfill its function.
• After the partitions are properly set, the settling tank should be tightly closed.
• Effectively protects the sewage system against all waste heavier than water, such as gypsum, investment compounds, etc.
• Necessary, EU regulations oblige all renovated and newly built dental technology laboratories to install devices that filter heavy waste such as gypsum, investment materials, etc.
• We attach the certificate of conformity needed for Sanepidu.

Information:

• Four overflow chambers.
• Tight closure.
• Standard '50 connections.
• Full freedom of positioning the inlet and outlet pipes.
• Operation and assembly instructions.
• Soft plastic dividers for easy cleaning.
• CE certificate for Sanepid.
• Very easy to clean.
• Resistant to low and high temperatures.
• 5 years warranty.

Technical data:

• Height 32 cm.
• Height of the filler pipe connection 38 cm.
• Diameter 32 cm.
• The height of the spout pipe is 18 cm from the base.

Packaging:

• 20l bucket.

Bag for plaster settling tank 14l/19l 20 pieces

Durable plastic bags, suitable for Mestra and other manufacturers' plaster clarifiers with a capacity of 14 liters and 19 liters.

Packaging:

• 20 pcs.

MESTRA 18L stainless steel plaster clarifier

Gypsum clarifier (gypsum settling tank), preventing gypsum from entering the sewage system.

Made of stainless steel, with a plastic cover to prevent odors from escaping.

Dimensions:

• height 290mm;
• width 450mm;
• length 230mm;
• weight 6.5 kg;
• capacity: 18 liters.

Packaging:

• 1 pc.

Plaster clarifier 26l

26-liter clarifier. Used for precipitating plaster or investment materials from water during model processing. Its tightly closed, four-chamber purification system prevents clogging of drains and the release of unpleasant odors. This four-stage sequential clarifier with a handle is mandatory due to EU regulations and requirements. All renovated and newly established prosthetic laboratories must have this type of device installed. The clarifier comes with installation and operating instructions and a full certificate of conformity required by the Sanitary and Epidemiological Station.

dimensions (diameter x height): 330x400mm max. dimensions with mounted hydraulic connectors (horizontally x vertically): 550x480mm water outlet height from the base: 250 mm

Packaging:

1 pc

Polypropylene clarifier with 14L waste bag

Plaster clarifier made of resistant polypropylene.

Characteristics:

• It has been specially designed for quick and easy cleaning as dirt is collected in a plastic bag;
• the lid closes hermetically and prevents the spread of unpleasant odors;
• Its size and shape have been designed so that the device can be easily installed under the sink.

Dimensions:

• height: 345 mm;
• diameter: 350 mm;
• capacity: 14 l;
• weight: 2.2 kg.

Packaging:

• Sediment tank + 2 bags

Polypropylene clarifier with 19L waste bag

Plaster clarifier made of resistant polypropylene.

Characteristics:

• It has been specially designed for quick and easy cleaning as dirt collects in the plastic bag;
• the lid closes hermetically and prevents the spread of unpleasant odors;
• Its size and shape have been designed so that the device can be easily installed under the sink.

Dimensions:

• height: 450 mm;
• diameter: 400 mm;
• capacity: 19 l;
• weight: 3.2 kg.

Packaging:

• Sediment tank + 2 bags

Mestra 70L Fiberglass Drainer on Wheels

It is made of highly durable fiberglass, has a capacity of 70 liters and is designed for easy installation under the sink.

Characteristics:

• it has wheels that make it easier to move;
• cleaning and emptying is easy thanks to optimal access to the container;
• The clarifier is supplied with all mounting nuts and accessories needed for assembly.

Technical data;

• height: 615 mm;
• width: 520 mm;
• depth: 600 mm;
• weight: 10 kg.

Packaging:

• 1 pc. with fittings and accessories needed for assembly