Ugin Thermocouple FCH05THE0014
Type K thermocouple for UGIN ring annealing furnaces. (Programix 25, Programix 50, Programix 100, and PC 30)
Packaging:
- 1 piece
Automatic Temperature Checking Set 2 - 5 pcs
- The "ATK2" automatic temperature control set is used to check and adjust firing temperatures in kilns with automatic calibration programs for the ATK2 system (e.g. Programat P500, P510, P700, P710, EP3000, EP3010, EP5000, EP5010).
- A special feature of the ATK2 is the simultaneous dual-range calibration.
Packaging:
- 5 pcs
Laboratory furnace NT 1313 KXP 4 with catalyst (P,S,R version)
- NT 1313 is a muffle plate furnace for laboratory and industrial use. The furnace uses high-quality insulating refractory materials and a reliable corundum heating unit with built-in heaters.
- The furnace is designed for work requiring precise temperature measurement, including heating, ashing, melting, burning off impurities, heating casting molds in prosthetic laboratories, heat treatment of metals, firing fine ceramics and stained glass windows.
Benefits:
heating chamber capacity 4.5 dm3,
stainless steel housing,
heating unit with built-in heaters, with three heating plates, with exceptionally high reliability,
the interior of the chamber and the heater resistant to mechanical damage,
large chamber in relation to external dimensions,
two-position door pressed with a spring protecting against self-closing during operation,
door switch disconnecting the power supply to the heaters,
sheathed thermocouple, closed, with increased durability,
thermal insulation made of fibrous refractory materials,
a fireplace that allows you to connect an extractor,
the thermoregulator placed on the side of the oven facilitates operation and is not exposed to the heat radiating from the door and the removable load,
small furnace weight,
Technical data:
heating chamber capacity 4.5 dm3,
stainless steel housing,
heating unit with built-in heaters, with three heating plates, with exceptionally high reliability,
the interior of the chamber and the heater resistant to mechanical damage,
large chamber in relation to external dimensions,
two-position door pressed with a spring protecting against self-closing during operation,
door switch disconnecting the power supply to the heaters,
sheathed thermocouple, closed, with increased durability,
thermal insulation made of fibrous refractory materials,
a fireplace that allows you to connect an extractor,
the thermoregulator placed on the side of the oven facilitates operation and is not exposed to the heat radiating from the door and the removable load,
small furnace weight,
furnace equipped with a catalyst.
KXP4 thermoregulator:
The KXP4 is a programmable microprocessor controller with a backlit alphanumeric display, sound signaling and a Bluetooth modem that enables recording and visualization of the process on a computer.
The KXP4 is available in three versions:
[P]basic - 1 1-stage program
- [S]standard 3 programs max. 3-stage, stages 2 and 3 can have a programmed cooling rate instead of heating, adjustable delay of switching on the furnace operation up to 9 days.
- [R]extended 9 programs max. 5-stage, stages 2, 3, 4 and 5 can have a programmed cooling rate instead of heating, adjustable delay of switching on the furnace operation up to 9 days.
Each version has:
- stages with programmable heating rate and stop time,
- special program C (e.g. for Speed masses),
- indication of thermocouple wear,
- SPMW software automatically reducing overshoots,
- the possibility of changing the program during its implementation,
- kiln operating hours counter,
- optionally, the ability to control the catalyst and program its shutdown threshold,
- optional wireless communication with a computer enabling registration of parameters and visualization of the process.
Parameters common to all KXP4 versions:
- Temperature setting range: 40°C - 1100°C
- Stop times: from 0min to 9h59min
- Program. heating rate: from 1 to 20 [°C/min]
- Temperature indication error (<700°C): +/-2°C
- Temperature indication error (>700°C): +/-3°C
- Timing Accuracy: 0.4%
- Power consumption without load: 5 VA
Packaging:
- 1 piece
Silent TS and TS2 Extraction bags - pack of 5
Special dust bag for Silent TS and Silent TS2 extractors.
Renfert catalog number 29210002
Advantages:
- Large capacity: 7.5 liters of filling volume.
- Durable, made of fully synthetic material.
- Tear-resistant.
- Equipped with a lock.
- Class M dust bag (DIN EN 60335\u20132-69).
Packaging:
- 5 pcs
Dustex Master Plus processing chamber
Dustex master plus, compact processing cover.
Renfert catalog number 26260105
Advantages:
- Protection against fragments, dust and fumes.
- Excellent visibility thanks to the extractor operating directly next to the work being processed.
- Ergonomically designed form and height-adjustable armrests enable free and comfortable work.
- Possibility of equipping the chamber with a magnifying glass with a handle (mikran number 7169).
- 36-month warranty.
Technical data:
- Mains voltage: 230 V, 50/60 Hz
- Lighting power consumption: 16 W
- Cable length: 2 m
- Diameter of the hose connection to the external extractor: internal: 35 mm, external: 40 mm
- Dimensions (width x height x depth): 380 x 285 x 400 mm
- Working chamber (capacity): 17 l
- Weight 5 kg.
Packaging:
- 1 piece
HERTZ 20 vibrating table 14x16 cm
- Plaster and investment vibrator from the HERTZ 20 series.
- Changing the vibration intensity is achieved by pressing the "up and down arrow" keys located on the front panel. A variable number up to 9 appears on the small display to indicate the intensity of the vibration.
- The rubber top can be easily removed to facilitate cleaning, which can also be done with steam, due to the high thermal and mechanical resistance of the material used.
- These vibrators guarantee a low noise level and stability thanks to the perfectly vertical movement and the suction cups that allow it to adhere perfectly to any type of surface.
Technical data:
- Power supply 230V 50/60Hz
- Power: 170W
- Table top dimensions: 14x16cm
- Overall Dimension 14(L) x 16(P) x 9.5(H)
- Weight 3.5 Kg
- 12 months warranty.
Packaging:
- 1 piece.
HERTZ 40 vibrating table 15x23 cm
- Plaster and investment vibrator from the HERTZ 40 series.
- Changing the vibration intensity is achieved by pressing the "up and down arrow" keys located on the front panel. A variable number up to 9 appears on the small display to indicate the intensity of the vibration.
- The rubber top can be easily removed to facilitate cleaning, which can also be done with steam, due to the high thermal and mechanical resistance of the material used.
- These vibrators guarantee a low noise level and stability thanks to the perfectly vertical movement and the suction cups that allow it to adhere perfectly to any type of surface.
Technical data:
- Power supply 230V - 50/60HZ
- Power: 170W
- Table top dimensions 15 x 23 cm
- Overall dimensions 15 (L) x 23 (R) x 9.5 (H)
- Weight 4.5 Kg
- 12 months warranty.
Packaging:
- 1 piece
Dreve EyeVolution curing lamp
EyeVolution curing lamp.
Application:
- Polymerization of individual trays made of light-curing materials.
- Polymerization of light-cured varnishes.
- Polymerization of blocking resins.
- And some composite materials.
Technical data:
- Light length 385 - 390 + 465- 470 nm
- Dimensions 205 x 205 x 255 mm
- Weight 1.5 kg
- Input voltage 100-240V/50-60Hz, 0.7A
- Output voltage 12V, 1.5A
- Maximum power consumption 18W
- RPM plate 4.5 rmp
- Program time 1/2/3/5/10 min
- Warranty 24 months
Packaging:
- 1 piece
Silent TS prosthetic extract
Silent TS prosthetic extractor with automatic switching on. It can be used as a general extractor or as a workstation extractor.
Renfert catalog number 29210050
Advantages:
- Possibility of continuous operation.
- Two-stage filtration system with a resolution of 99.9%
- 3x longer service life compared to conventional collector motors (guaranteed 1000 hours of operation).
- Low noise level of only 58 dB(A).
- Simple operating concept.
- Thanks to its compact design, it does not take up much space.
- Large bag capacity (approx. 7.5 l).
- Easy replacement of the filter bag from the front.
- Very clean, dust-free removal of filter bags (lockable).
- The automatic switching on can be set depending on your needs and thus ensures optimal adaptation to various dust-generating devices.
- 36-month warranty.
Technical data:
- Dimensions - 595 x 225 x 565 mm
- Power supply - 230 V, 50/60 Hz.
- Power consumption 1400 W.
- Connection value of the device's plug socket max. 2000 W
- Internal intake pipe 32.5 mm, external 40.0mm.
- Suction power 3300 l/min.
- Weight 21 kg.
Packaging:
- 1 piece. (SILENT TS, 3 m suction hose, special dust bag, fine filter, universal hose connector)
Vario Basic stationary multifunctional sandblaster
Stationary prosthetic sandblaster (circulating - closed sand circulation).
Renfert catalog number 29600005.
Advantages:
- Bright lighting.
- Durable sanding nozzles.
- Small dimensions.
- Can be hung on the wall.
- Very easy to clean.
- 36-month warranty.
- Expansion from 1 to 4 sand tanks.
- Individually adjustable circulating sandblaster nozzle using the Venturi principle for uniform and effective sandblasting.
- Thanks to the use of an intelligent system in the extractor, sand consumption has been reduced by 50% (only unnecessary, fine dust is removed).
Technical data:
- Mains voltage 220-240 V, 50/60
- Working pressure 1-6 bar
- External connection pressure 6-8 bar
- Air consumption at 6 bar (87 psi) 200 l/min
- Dimensions (width x height x depth) 380 x 540 x 450 mm
- The size of the sandblasting chamber is 23 l
- Capacity of 1 tank 1000 ml
- Weight 14 kg
Packaging:
- 1 pc (Basic unit without additional tanks)
Waxlectric And electric wax cutter
Waxlectric is an electronically controlled wax cutter, ideal for modeling crowns and bridges, and other auxiliary work. Knife with 1 tip.
Renfert catalog number 21560000
Advantages:
- Operating temperature min. 50 °C/max. 200 °C - 1 handle.
- Electronically controlled with the ability to save up to 3 temperatures per channel.
- Quick setting of saved temperatures by pressing a button.
- Operating temperature programmable in the range of 50-200 °C.
- Temperature setting with degree accuracy.
- 36-month warranty.
Technical data:
- Permissible mains voltage 100–240 V
- Permissible mains frequency 50/60 Hz
- Supply voltage 12 V DC
- Output power 5W
- Transformer input voltage 100–240 VAC (50 Hz)
- Transformer output voltage 12 V DC (1 A)
- Operating temperature min./max. 50–200 °C
- Handle cable length 85 cm
- Dimensions (W x H x D) 120 x 60 x 98 mm
- Weight (with mains adapter) ~430 g
- Weight (without power supply) ~240 g
Packaging:
- 1 pc (1 control unit, integrated holder for 1 handle and holder for 6 tips, 1 handle, 1 waxing tip no. 2155 0102, 1 power supply)
End fittings for exhaust manifold
Set of end sleeves for the splitter.
Renfert catalog number 29210003
Packaging:
- 2 pieces
Vortex Compact 3l prosthetic extractor
Wet and dry extraction with high suction power and a durable collector motor for dusty devices.
Renfert catalog number 29245000
Advantages:
- Health protection thanks to a double filter system, optional H/Hepa filter available.
- Many application possibilities - one extractor for everything, also for wet work.
- Possibility to work with several devices at the same time.
- Reusable cloth filter.
- Automatic switching on + speed control saves energy.
- System Free - Filter.
- 3 years warranty.
- Less dust bag consumption.
Technical data:
- Power supply 230V, 50/60 Hz.
- Power 1200 W (230 V).
- Suction power 3700l/min.
- Weight 10 kg.
- Dimensions 385 x 600 x 480 mm.
Packaging:
- 1 piece.
Polisher - grinder MAP 2 - prosthetic polisher
Polisher - prosthetic grinder, two-speed for continuous operation, with high power.
Technical data:
- power 500W
- speed 1400 / 2800 rpm.
- dimensions 520 x 120 x 235 mm
- weight 10.5 kg
- 12 months warranty.
Packaging:
- 1 pc with 2 tips and 1 grinding wheel holder
IRIS 2 Evolution vacuum mixer (with vacuum) Promotion
Iris 2 Mestra vacuum mixer for mixing silicones, investment materials and plaster with a built-in vacuum pump. Does not require connecting a compressor. Plasters, investments and silicones are mixed to obtain absolutely homogeneous, bubble-free mixtures. It makes work in the laboratory much easier.
Characteristics:
- Built-in internal vacuum
- Can be mounted on the wall
- Very simple operation
- Ergonomic control panel
- Memory for 4 independent mixing programs
- The set includes a container + a 500 ml stirrer
- 12-month warranty.
Technical data:
- Dimensions - 15.5 x 20.5 x 35 cm.
- Power supply 230 V; 50/60Hz; 100W
- Number of revolutions 100- 400 rpm.
Packaging:
- 1 pc - Vacuum mixer, 1 pc 500 ml container
Fabric filter for Vortex extractor hood
Fabric filter for Vortex extractor hood.
Renfert catalog number 29245005
Packaging:
- 1 piece
Microtorch Type II torch - round base
MicroTorch gas burner with piezo ignition for lighters. Equipped with a safe switch lock and flame size adjustment.
Characteristics:
- Burner for use in the dental and prosthetic office.
- Gas filling burner for lighters (propane-butane)
- Easy to use
- Achievable temp. 1300 °C
- 3 months warranty
Packaging:
- 1 piece.
Microtorch Type III burner
MicroTorch piezoelectric ignition burner for lighter gas. Equipped with a safe switch lock and flame size adjustment.
Characteristics:
- A modern MicroTorch burner with a reinforced structure.
- The maximum filling of the tank is enough for 30 minutes of continuous operation.
- Burner for use in dental and prosthetic offices.
- Burner for filling with lighter gas (propane-butane)
- Easy to use.
- Achievable temperature: 1300 °C.
- 3 months warranty.
Packaging:
- 1 piece.
Twister cuvette with mixer 200 ml
Cuvette with mixer for Twister for mixing silicone, investment material and plaster.
Renfert catalog number 18200200
Advantages:
- The well-thought-out geometry of the mixing paddle ensures proper mixing of the masses.
- Marking the maximum filling level of the container.
- The excess material collection zone protects the container against accidental overfilling.
- Container made of high-strength polycarbonate.
Packaging:
- Cuvette with stirrer 200 ml
Double polisher cover with lighting
OMEC polisher cover. Ensures cleanliness and comfort during cleaning and polishing.
- It is made of scratch- and rust-resistant powder-coated metal.
- The hood is adapted to the use of an extractor.
- It is also equipped with an adjustable 13W neon lamp and transparent and replaceable protective covers.
Technical data:
- Voltage: 230V / 50Hz
- Lighting: 13W neon lamp
- Weight: 10Kg
- Dimensions: 73x23x34h cm
Packaging:
- 1 piece
Millo milling machine for dental arches
Compact dental arch milling machine with a powerful and maintenance-free engine.
Renfer catalog number 18040000
Advantages:
- Easy cutter replacement using the integrated tool key.
- Easy cleaning thanks to the removable work table.
- Stable, non-tilting unit thanks to the enlarged base surface.
- Space saving thanks to compact design.
Technical data:
- Permissible mains voltage 220–240 V
- Permissible mains frequency 50/60 Hz
- Rated speed 2770 rpm (50 Hz)
- Dimensions (W x H x D) 214 x 207 x 252 mm
- Permissible drill shank diameter is Ø 6 mm
- Permissible drill length 65 mm
- Weight ~5.7 kg
Packaging:
- 1 pc Millo 220- 240 V, 1x Conical cutter, roughing (no. 18060002)
Magma catalyst for ring heating furnace
Thanks to the catalytic oxidation of gases, the catalytic converter reduces annoying smoke and odor.
Renfert catalog number 23000001
Advantages:
- Intelligent control by the Magma furnace.
- Chemical conversion of organic substances to carbon dioxide and water vapor.
- Increasing the durability of the catalyst thanks to the automatic shutdown function at a temperature of 650 °C.
- When using the Speed program, the catalytic converter remains on all the time.
Technical data:
- Permissible mains voltage is 230 V.
- Power consumption 580 W
- Weight 4.8 kg.
- Dimensions (width x height x depth) 190x370x170mm.
Packaging:
- 1 piece
Steam generator VK 200
Easy-to-use steam generator from the Italian company Effegi, perfect for any prosthetic laboratory. It has a separate water tank so you don't have to wait for the device to cool down to fill it with water.
Attention:
- Fill the tank with demineralized water.
Benefits:
- It does not require connection to the water network, as it has its own tank.
- After 10 minutes from switching on, the device is ready for use.
- A yellow indicator light signals the need to refill water in the tank.
- 3-button gun (blue hot water, blue/red steam/water mix, red steam)
Technical data:
- Voltage 230V
- Frequency 50HZ
- Power Consumption 1950W
- max. operating temp. 135 degrees C
- Tank capacity 2.0 dm3
- Radiator capacity 2.2 dm3
- Water consumption 0.2 l/min
- max. working pressure0.4 MPa
- The set pressure of the safety valve is 0.55 MPa
- Height 41 cm
- Width 34cm
- Depth 33 cm
- Net weight - 11 kg
Packaging:
- 1 piece
HOTTY wax melting pot
A reliable pot for immersing in wax with a potentiometer ensuring even heating of the wax.
Renfert catalog number 14600000
Advantages:
- Suitable for all dipping waxes thanks to smooth temperature regulation from 60 to 110°C.
- Uniform wax layer thickness thanks to uniform temperature distribution.
- Save time while working thanks to a quick and constant heating phase.
- Ergonomically profiled housing provides optimal finger support.
- The integrated cover provides protection against dirt and dust.
Technical data:
- Permissible mains voltage 220 - 240 V
- Permissible mains frequency 50 - 60 Hz
- Temperature range 60 - 110°C
- Weight 360 g
- Dimensions (width x height x depth) 90 x 65 x 98 mm
- 36-month warranty
Packaging:
- 1 piece
CarloDe Giorgi centrifuge
Electric centrifuge for melting metals with a burner. Electronic timer with last spin time memory, easy and quick balancing of the arm
Technical data:
- 370W power,
- dimensions 600x570x330mm,
- weight 43 kg
Package:
1 piece
Prosthetic Polisher SDJ200 - Made in Poland
Popular grinding and polishing machine dedicated to work in prosthetic laboratories. Withstands work under heavy and continuous load.
Two-speed:
1st gear - 1500 rpm 2nd gear - 3000 rpm
Power: 250-500W
The set includes a right + left spindle and a polishing wheel holder
Plastvac P7 vacuum former
Vacuum device for forming thermoplastic tiles. Adapted to the use of both round (125mm diameter) and square inserts. with sides from 125mm to 130mm.
Application:
- Matrices for composite resins.
- Temporary and makeshift bridges.
- Guards and positioners.
- Soft and hard teeth whitening trays.
- Splints used in the prophylaxis of bruxism.
- Relaxation rails.
- surgical templates.
Technical data:
- Power supply: 220 - 240V
- Heater power: 450 W
- Suction motor power: 1400W.
- Dimensions: (length × width × height) 180 × 230 × 290 mm.
- Weight: 4.5 kg.
Packaging:
- 1 piece.
Mobiloscope S laboratory microscope
MoBiloskop S laboratory microscope.
Renfert catalog number 22000400
Advantages:
Thanks to the 360-degree rotatable arm, the microscope can support up to 4 workstations.
5x and 10x magnification ensures maximum precision.
"Anti-shock" mechanism for stabilizing the field of view.
A wide field of view with a deep zoom enabling you to see the most precise details of your work.
Parameters:
- Field of view: 5x: 44mm / 10x: 22mm
- Zoom depth: 5x: 22mm / 10x: 10mm
- Working distance: 150 mm
- Maximum tabletop thickness when installing the universal clamp: 18-74 mm
- Maximum thickness of the tabletop when mounting screws and clamps: 26 mm
- Weight: 1830g
Additional equipment:
- LED lighting: 18 white LED fluorescent lamps / 9000 LUX - 22005000 additional equipment price approx. PLN 800
Packaging:
- 1 x S Mobiloscope
W2000 prosthetic lift
Dimensions: 36.5 / 36 / 20.5 cm
Technical data:
- power 1200- 1400W
- smooth power regulation
- maximum volume 67dB
- 8.5L waste chamber capacity
- air flow 65l / s
- the start function with the start of the micromotor operation
- triple filtration
Package:
- 1 piece.
OMEC prosthetic lift - PROMOTION
A compact device for extracting excess dust from the workplace. Capacity 14 l / sec. Dimensions 34x34x54 cm
Package:
1 piece.
Steam generator VK 300
Steam generating device with a maximum pressure of 4 bar. Compact, intended for connection to the water network. The housing is made of varnished stainless steel, the cover is made of varnished aluminum.
Advantages:
- control lamps signaling operation
- the pressure gauge allows you to control the pressure in the boiler
- dry steam outlet button
- dry steam nozzle
- reset button to resume the cycle when the pump protection has tripped
- gun operating button
- safety pistol, possibility of working both on the right and on the left side, ergonomic, made of special heat-resistant material
- components - a copper boiler with a capacity of 3.6 l, boiler insulation using fiber resistant to 500 degrees C, casing made of stainless, painted steel, copper pipes, brass fittings, safety valve numbered and set to 5.5 bar.
Technical data:
- Voltage - 230 V
- Frequency - 50 Hz
- Power consumption - 1950 W
- Maximum working temperature - 135 degrees C
- Heater capacity - 3.6 dm3
- Water consumption - 0.50 l / min
- Maximum working pressure - 0.4 MPa
- Safety valve setting - 0.55 MPa
- Noise level - 81.9 dB (A)
- Degree of protection - X3 IP
- Height - 360 mm
- Width - 310 mm
- Depth - 300 mm
- Weight - 16 kg.
Package:
- 1 piece.
Vibrax vibrator ball
Vibrating ball ensuring even flow of mass when pouring casting rings and pouring impressions.
Renfert catalog number 18300001
Packaging:
- 1 pc/ball only, without device
.
Millo PRO Arch milling machine
Equipped with a function of smooth adjustment of the cutter height.
Renfert catalog number 18050000
Advantages:
- The powerful, maintenance-free motor allows for quick and easy grinding of dental arches.
- The reliability and accuracy of the models are guaranteed by a smooth grinding surface and an absolutely even conical surface of the dental arch.
- Connecting an exhaust hood guarantees cleanliness of the workplace and a high level of health protection.
Functions:
- Millo pro additionally has adjustable milling height, which allows the preparation of places in the dental arch.
- Extractors without automatic switching on can be connected directly to Millo pro, which will automate the moment of switching on the extractor.
Technical data:
- Permissible mains voltage 220 – 240 V
- Permissible mains frequency 50 – 60 Hz
- Max. permissible connection load of the plug socket 2200 VA
- Total connected power 2320 VA
- Rated speed 2770 rpm
- Permissible drill shank diameter is Ø 6 mm
- Permissible drill length 65 mm
- Direct connection to the suction unit 1
Packaging:
- 1 piece.
Twister cuvette with mixer 500 ml
The well-thought-out geometry of the mixing paddle ensures proper mixing of the masses.
Renfert catalog number 18200500
Advantages:
- Marking the maximum filling level of the container.
- The excess material collection zone protects the container against accidental overfilling.
- Container made of high-strength polycarbonate.
Packaging:
- 500 ml cuvette with mixer.
Twister cuvette without stirrer 500 ml
Cuvette for Twister mixer 500 ml, container only.
Renfert catalog number 18200520
Packaging:
- 500 ml
Dustex Magnifier with handle 1 pc
High-quality magnifying glass with a flexible boom.
Renfert catalog number 26260300
- To be mounted in a Dustex processing chamber.
Packaging:
- 1 piece
Power Pillo pneumatic chisel
The pneumatic cutter is characterized by a massive construction, high impact force and minimal vibration transmission.
Renfert catalog number 50225000
Advantages:
- High impact force.
- Maintenance-free.
- Stepless power regulation is also possible while the device is operating.
- Tool-free cutter replacement.
- Thanks to the high weight and fast piston frequency, greater impact force and smoother operation.
Technical data:
- Nominal working pressure 5 bar.
- Operating pressure 4-6 bar.
- Air consumption 10 l/min.
- Hand/arm vibration (Ahv) (according to EN ISO 5349-1) 5.2 m/s²
- Dimensions (Ø x Length) Ø 29 x 168 mm.
- Weight ~398 g.
Packaging:
- Release cutter with a flat, wide knife.
- 1 connection hose 2 m and 1 set of filters.
Pillo pneumatic chisel
Pneumatic cutter with massive construction, high impact force and minimal vibration transmission.
Renfert catalog number 50224000
Advantages:
- High impact force.
- Maintenance-free.
- Stepless power regulation is also possible while the device is operating.
- Tool-free cutter replacement.
Technical data:
- Nominal working pressure 5 bar.
- Operating pressure 4-6 bar.
- Air consumption 9 l/min.
- Hand/arm vibration (Ahv) (according to EN ISO 5349-1) 7.3 m/s²
- Dimensions (Ø x Length) Ø 29 x 157 mm.
- Weight ~300 g.
Delivery range:
- Release cutter with a flat, wide knife.
- 1 connection hose 2 m.
- 1 set of filters.
Polishing-grinder MAP-1 (prosthetic polisher)
Single-speed polisher.
Technical data:
- power - 500 W
- turnover - 2800 rpm
- dimensions - 520 x 120 x 235 mm
- weight - 10 kg
Package:
1 piece.
Polisher - grinding machine LUX-1 (prosthetic polisher)
Polisher - single-speed grinder.
Technical data:
- power - 300 W
- revolutions 2800 rpm.
- dimensions - 450 x 130 x 210 mm
- weight - 6 kg.
Package:
1 piece.
Extreme - Wet turbine with LED lighting
Turbine with a water jacket and led lighting, designed for working with zirconium. Water cooling of the processed zirconium crowns significantly reduces the temperature on their surface, which minimizes the risk of microcracking, increasing the patient's safety and minimizing the risk of breakage due to processing after the sintering process.
Built-in LED lighting facilitates precise processing of the object.
The built-in "Anti Dust" mechanism extends the life of the turbine by minimizing the amount of dust that can enter its interior during operation.
It is possible to purchase the device in the DUAL version with a built-in brushless prosthetic handpiece [50,000 rpm, power: 7.5Ncm]. Miccode: 6296
Features:
- high power turbine with LED lighting for zirconium processing
- turnover max. 150,000 rpm
- power 4.0 Ncm
- dimensions of the turbinate diameter 25 mm, length 101 mm
- drill chuck diameter: 1.6mm [FG type]
- built-in water spray [tank]
- built-in LED lighting
- compact controller that can be split into 2 modules. Manufacturer: MicroNX [South Korea]
Package:
- 1 piece.
Bunsen burner with needle valve - natural gas
Bunsen burner with needle valve - natural gas.
Attention:
- DIN burners cannot be turned off completely according to standard 30665. Therefore, a small flame burns even when the needle valve valve is closed. For safety reasons, the user is required to shut off the gas supply to the laboratory burners at the mandatory central stationary shut-off point in the laboratory.
Packaging:
- 1 piece
Bunsen burner with needle valve - propane/butane
Bunsen burner with needle valve - propane/butane.
**Attention:*
- DIN burners cannot be turned off completely according to standard 30665. Therefore, a small flame burns even when the needle valve is closed. For safety reasons, the user is required to shut off the gas supply to the laboratory burners at the mandatory central stationary shut-off point in the laboratory.
Packaging:
- 1 piece
KAVO K-5 Plus micromotor foot controller
The new high-torque micromotor guarantees stable operation in the full speed range from 1,000 to 35,000 rpm. Effective silencing combined with other features allows to meet high requirements in the performance of prosthetic works.
The K5plus weighs only 200 g. Thanks to its ergonomic shape, ultra-thin cable and silent operation, as well as low weight, the operator is sure and comfortable to work with.
Technical data:
- Speed range 1,000 - 35,000 rpm
- Max torque 4.5 Ncm
- Cutter size 2.35mm, 3.00mm, 1/8
- Toe-in 0.02 mm
- Cooling does not require additional cooling
- Brushless DC motor drive
- The shape of the handle is designed according to the principles of ergonomics
Package:
1 piece.
Waxlectric II - handle with red cable
Waxlectric II knife handle with cable, red.
Renfert catalog number 21540002
Packaging:
- 1 piece.
PiDental Orthoflex Ferezarka
A precise, multifunctional milling machine from the Hungarian company PiDental
Advantages:
- perfect for milling
- stroke adjustable with 1 / 100mm micrometer
- Integrated regulator
- micromotor with light
- electromagnetic stage with high accuracy
- lever for lowering tools
- very quiet and vibration-free operation
- maximum accuracy thanks to the correct bearing
Technical data:
- voltage: 230 V 50Hz
- max power: 70W
- torque: 5.2 Ncm
- number of revolutions: from 0-30000 rpm.
- dimensions: height 500mm, width 300mm, depth 400mm
- weight: 10kg
Package:
1 piece
Universal adapter for connecting the hose
Universal adapter for connecting the hose.
Renfert catalog number 900034305
Advantages:
For the most commonly used hose sizes.
Precise connection without the need for cutting.
Packaging:
- 1 piece.
Prosthetic equipment and devices at mikran.pl
In our store, we offer a wide selection of prosthetic equipment and devices from renowned manufacturers. We offer, among others:
- Plaster dispensers
- Electropolishing
- Equipment for vacuum and pressure forming
- Arch milling machines and clasps
- Pressure pots
- Steam generators
- Chambers for work
- Compressors
- Light-cured lamps
- Vacuum mixers
- Silicone mixers
- Prosthetic micromotors
- Microscopes,
- Wax dishes
- Electric knives
- Model cutters
- Induction foundries and centrifuges
- Gypsum settling tanks
- Burners
We work with, among others, companies such as Renfert, Omec, Carlo De Giorgi, Dreve, Effegi Brega, Mestra, Ivoclar Vivadent, Mestra, Nsk, Up3D, Kavo, which specialize in the production of various types of equipment and devices intended for prosthetic laboratories.