• Prosthetics
• Devices
• Induction foundries and centrifuges
• Ducatron Quattro Induction Foundry PROMOTION
• Product code 8229
• Product code 8229

Ducatron Quattro Induction Foundry PROMOTION

Mikran.pl presents a new model of the Ducatron Quattro induction foundry by UGIN. It is the best induction foundry designed with ergonomics and energy saving in mind.

Thanks to the use of the "DC gear" system in the drive motor, the need to adjust the belt tension is eliminated. In addition, a higher starting torque with a lower noise level and vibration-free operating characteristics are achieved.

The device can be easily adapted to work in any laboratory, it only requires a 10/16A grounded socket.

In the Ducatron Quattro induction foundry, the molten metal is forced into the mold by centrifugal force generated at the tip of the arm. The efficiency of this type of machine depends on the proper matching of several elements: engine torque, arm length and gear ratio. The ratio of arm rotation speed to its length has the greatest influence on the efficiency of the casting machine, which is why centrifugal foundries are large-sized devices. The main advantage of centrifugal foundries is their high efficiency in the casting of extensive structures such as skeletal prostheses and bridges. This is due to the fact that the casting force is distributed in many directions, which makes it possible to obtain high-quality castings of elements with complex shapes.

The Ducatron Quattro is characterized by a high degree of versatility. They enable effective casting of skeletal dentures or extensive bridges made of steel as well as works such as crowns and bridges made of precious alloys.

When buying a device at mikran.pl, in addition to high-quality equipment, you get a full after-sales service package in the form of:

• fast and efficient service
• Free shipping during the warranty period

Advantages:

• Closed circuit cooling system.
• Compact, functional design
• Perfect control over the melting process
• Intuitive, easy to use
• Temporarily close at the end of the cooling pump cycle
• Automatic standby after 5 minutes of inactivity

parameters:

• socket: 230V 50/60Hz
• power: 2500W
• power consumption 2000 W
• dimensions: 600x980x620 mm
• weight 95 kg

Melt:

• generator frequency: 150 Khz
• power adjustment from 20% to 100%
• melting capacity: 60g of metal

Injection:

• spin speed:450 rpm

- two operating modes:

1. fast, for base and semi-precious metals
2. moderate, for precious metals

Security:

• Cooling system warning light for dangerously low water level
• generator operation light
• cover lock indicator
• front-mounted two-pole power switch circuit

Packaging; - 1 piece.