IPS e.max CAD for Cerec/InLab LT C14/ 5 pcs
- Product code 8098
- Product code 8098
- Brands Ivoclar Technical
- Availability: 60
206.59€15 %
-
+vat (8%)
175.61€ incl tax
- CAD/CAM
- Milling blocks
- IPS e.max CAD
- IPS e.max CAD for Cerec/InLab LT C14/ 5 pcs
- Product code 8098
- Product code 8098
Delivery methods
Pickup From Store |
0.00€ gross with tax |
|
GLS Shipping (Poland)Delivery time is about (1) days from the moment of shipment. Free delivery from 114.34€ gross with tax. Place your order up to 14:30 PM for delivery today. |
3.43€ gross with tax |
- CAD/CAM
- Milling blocks
- IPS e.max CAD
- IPS e.max CAD for Cerec/InLab LT C14/ 5 pcs
- Product code 8098
- Product code 8098
IPS e.max CAD for Cerec/InLab LT C14/ 5 pcs
IPS e.max CAD are lithium disilicate glass ceramic blocks for CAD/CAM technology. The manufacturing process guarantees completely homogeneous blocks. The pre-crystallized (blue) block can be easily developed in a CAD/CAM device. The block in the pre-crystallized state has a characteristic white color that goes through a blue shade to a blue-gray tone. This color depends on the composition and structure of the glass ceramics. The strength of the material in this state is 130-150 MPa and is thus comparable to other glass ceramic blocks currently available on the market. After the restoration has been cut out of the blocks, it is crystallized in the Ivoclar Vivadent ceramic furnace (e.g. Programat CS). The crystallization process is easy to carry out and, unlike other CAD/CAM systems, restorations made in this way do not shrink and do not require a time-consuming infiltration process, and the entire process takes about 20-25 minutes. Crystallization at 840 °C causes changes in the structure of the ceramics, followed by the growth of lithium disilicate crystals. The resulting densification of 0.2% is already predicted in the CAD software and taken into account when cutting the restoration. Thanks to changes in the structure, the strength of the material increases to 360 MPa and it obtains the appropriate optical properties. <br/>IPS e.max CAD blocks are characterized by natural brightness. Thanks to the translucency and variety of shades, fully anatomical restorations can be easily fabricated with this glass ceramic.
Indications:
Veneers
inlay
Onlay
Partial crowns
Anterior and lateral crowns
Implant superstructures for single restorations (anterior and lateral sections)
Dimensions C14:
Width: 12.4mm
Length: 14.5mm
Height: 18.0mm
Packaging:
5 pcs
- CAD/CAM
- Milling blocks
- IPS e.max CAD
- IPS e.max CAD for Cerec/InLab LT C14/ 5 pcs
- Product code 8098
- Product code 8098
last actualisation : 2024-04-20 10:04:03