Secret Agent Powder hardener for 3D models powder 300g

Hardener for 3D resin models.

Characteristics:

• Secret Agent Powder appears exactly where the problems known to everyone working with 3D resin prints begin;
• when the model turns out to be too soft, prone to damage, or a thin, sticky layer of incompletely cured resin remains on its surface, the preparation takes control of the situation;
• it also works well when thorough cleaning of the model after printing becomes a challenge, and working with acrylic ceases to be predictable;
• this is an innovative solution created with the real problems of laboratories in mind, which until now did not have one effective way to solve them.

When to use Secret Agent Powder:

• when the 3D resin model turns out to be too soft or prone to damage;
• when a thin, incompletely cured layer of resin remains on the surface;
• when there are difficulties with thorough cleaning of the model after printing;
• when there are problems separating acrylic from 3D resin.

Features:

• eliminates the incompletely polymerized layer;
• the model surface becomes harder and scratch-resistant;
• the oxygen inhibition layer disappears, which enables direct and secure bonding of addition silicones without the need for additional processing;
• the model is fully prepared for further work;
• easy and fast model hardening procedure.

Instructions for use:

• the powder dissolves in warm water (45–55°C), creating an active solution in which the freshly printed and isopropanol-rinsed model is immersed;
• after just 5–10 minutes, the oxygen inhibition layer is completely removed.

Technical data:

• mixing proportions: 4.5 g of powder/100 ml of water;
• curing time: 5-10 min;
• color: white.

Packaging:

• 1 pc.