Secret Agent Powder 3D model hardener powder 300g

Hardener for 3D resin models.

Characteristic:

• Secret Agent Powder comes in right where the problems familiar to anyone working with 3D resin prints begin;
• when the model turns out to be too soft, susceptible to damage or a thin, sticky layer of not fully hardened resin remains on its surface, the preparation takes control of the situation;
• It also works well when thoroughly cleaning the model after printing becomes a challenge and working with acrylic is no longer predictable;
• is an innovative solution created to address real problems faced by workshops, which until now had no single, effective solution.

When to use Secret Agent Powder:

• when the 3D resin model turns out to be too soft or susceptible to damage;
• when a thin, not fully cured layer of resin remains on the surface;
• when it is difficult to thoroughly clean the model after printing;
• when having problems separating acrylic from 3D resin.

Characteristics:

• eliminates the not fully polymerized layer;
• the surface of the model becomes harder and scratch-resistant;
• the oxygen inhibition layer disappears, which enables direct and reliable bonding of addition silicones without the need for additional processing;
• the model is fully prepared for further work;
• easy and quick procedure for hardening the model.

How to use:

• the powder is dissolved in warm water (45–55°C), creating an active solution in which the freshly printed and rinsed in isopropanol model is immersed;
• After just 5–10 minutes, the oxygen inhibition layer is completely removed.

Technical data:

• mixing proportions: 4.5 g powder/100 ml water;
• curing time: 5-10 min;
• color: white.

Packaging:

• 1 pc.