• Prosthetics
• acrylics
• For cooking
• Estetic hot melt acrylic polymer 500g
• Product code 3767
• Product code 3767

Estetic hot melt acrylic polymer 500g

Estetic acrylic material for making denture plates, heat polymerizing.

Available colors:

• 0 colorless;
• 8 pink unveined;
• 10 pink without veins;
• 8V pink with veins;
• 10V pink with veins.

Characteristics:

• requires a short polymerization time;
• is characterized by low water and saliva absorption;
• excellent plasticity and ease of forming under press pressure does not cause increased short-circuit;
• can be combined with soft, flexible relines;
• the translucency of the mass allows the natural color of the patient's mucous membrane to be highlighted
• meets the requirements of the PN-EN ISO 20795-1 standard.

Technical data:

• mixing ratio: powder/liquid by weight - 2:1
• dough preparation time: 10-15 min.
• Shelf life of the dough: 15 min.
• residual monomer content: 1.33%
• fracture strength: 73.0 Mpa.
• bending elasticity: 2334 MPa.
• solubility: 0.1 μg/mm³
• sorption: 22.6 μg/mm³

Polymerization process:

• Place the can in boiling water (or, in the case of thick dentures, in cold water and bring to a boil)
• keep at 100°C for 20 min.
• cool in water to room temperature.

Packaging:

• 500g