Agar Sheraform 6kg - sale, expiry date 01.2026

White mass for duplicating agar-based models.

Very precise, with a consistency similar to silicone.

Characteristics:

• white color;
• extremely durable material;
• very smooth casting surfaces - qualitatively comparable to the effects provided by silicone;
• resistance to tearing;
• mass for repeated use.

Instruction:

• When using for the first time, do not add water;
• the melting temperature should not exceed 90/92 °C, a higher temperature may damage the mass;
• mix until the mixture is completely liquid, otherwise there will be lumps;
• before duplicating, rehydrate the model in lukewarm water for 15 to 30 minutes;
• operating temperature 45 to 50 °C;
• setting time minimum 60 minutes;
• If cold water is used to cool the agar to accelerate setting, wait until the mold reaches room temperature before pouring the investment material;
• For reuse, add 50 to 100 ml of water.

Melting the mass in the microwave:

• cut the agar into small pieces, pour water over it and stir, then pour off the water;
• put the prepared mass in a non-metallic container into the microwave;
• turn on the device for 60 seconds at full power;
• remove and stir for about 30 seconds;
• Repeat steps 3 and 4 2 or 3 times until the mass reaches approximately 84 °C
• pouring agar over the prepared model.

Packaging:

• 6kg